Military Engineer Services-MES has published Tender For Additional/Alternator/Improvement To Ftw Complex At Afs Hakimpet Under Ge(Af) Hakimpet. Submission Date for this Tender is 27-12-2023. Mobile Generator Tenders in hakimpet Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-12-2023 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard dense soil |
| 2 | Excavating in trenches, exc 1.5m wide and n exc 3 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard dense soil |
| 3 | Returning, filling in, including spreadin, levelling, watering and well ramming in layers not exceeding 25 cm in hard/ dence soil, complete all as specified and directed. |
| 4 | M&L Cement concrete of Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete. |
| 5 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 6 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 7 | M&L Reinforced cement concrete M-25 (design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, roof slabs,etc.; under-reamed piles and mass concrete |
| 8 | M&L Reinforced cement concrete M-25 (design mix) in Beams, cantilevers,bressummers, lintels over 1.5m span |
| 9 | M&L Reinforced cement concrete M-25 (design mix) in Columns, pillars, piers, posts and struts |
| 10 | M&L Reinforced cement concrete M-25 (design mix) in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like |
| 11 | M&L Formwork to sides of concrete foundations, footings,columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 12 | M&L Formwork to sides and soffits offloor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 13 | M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions |
| 14 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 15 | M&LFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide |
| 16 | M&L for 10mm thick rendering on fair faces of brick work (or) concrete surfaces in CM 1:3 mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 17 | Supply only liquid water proofing compound. |
| 18 | M&L for cleaning the roof, plastered surfaces and applying evenly a priming coat of bitumen primer at the rate of 1.2 kg per Sqm and providing APP based polymeric modified water proofing membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on primed surface by forced application and applying two coats of solar reflective bituminous aluminium paint @ 0.1 kg/Sqm per each coat complete all as specified and directed. |
| 19 | M&L excavated earthfilling in floors or pavings,Spreading and levelling in layers n exc. 25 cm thick spread, levelled and rammed including watering. |
| 20 | M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion(ATT) per square metre of surface |
| 21 | M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 22 | M&L ANTI-TERMITE TREATMENT Along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 23 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 24 | M&L 100mm thick Cement concrete type C-2, 1:3:6(40mm graded aggregate) as in sub base of floors |
| 25 | M&L 25mm thick Cement concrete type B-1, 1:2:4(20mm graded aggregate) as in sub base of floors |
| 26 | Demolition of reinforced cement Concrete of any description and in Roofs, floors (other than groundfloors), beams, staircases, landing, chajjas and similar suspended workand removed debris outside MD land complete all as specified and directed. |
| 27 | Demolition of Concrete of any description and in any position not otherwise specifically provided for and removed debris outside MD land complete all as specified and directed. |
| 28 | M & L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, floor, path, pavings etc.,surface finished fair & even complete all as specified and as directed. |
| 29 | M&L forfor Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 30 | M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 31 | M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in Dado/ skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and backingcoat of 10mm thick in CM 1:4 |
| 32 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 33 | M&L Pre-cast cement concrete Type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in widthbuilt in cemrent mortar 1:4 complete,all as specified and directed. |
| 34 | Taking down plaster including tiles if present on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar |
| 35 | M&L for rendering to brick masonry surfaces 15mm thick in cement mortar 1:4, complete all as specified and directed |
| 36 | Material and labour forfor digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd. |
| 37 | M&L for rendering to concrete surfaces 15mm thick in cement mortar 1:4 in ceiling, complete all as specified and directed |
| 38 | M&L 3 coats of white wash on plasteredsurfaces of ceiling complete all as specified. |
| 39 | S&F in repair vitreous China wash hand basin white,oval type,size 580X450 mm including cutting for pinning in ends of brackets,complete. |
| 40 | S & F in repair for vitreous china, bowl urinal half stall, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 41 | S&F in repair vitreous China wash down water closet pan white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete. |
| 42 | S & F Urinal spreader chromium platedfor fixing with 15 mm dia pipe. |
| 43 | S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 44 | S&F in repair angle valves15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. |
| 45 | S&F in repair 15 mmbore fancy concealed type,Stop valves,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 46 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union. |
| 47 | S&F in repair 15 mmbore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 48 | S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, . |
| 49 | S&Fin repair Two way taps 15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed. |
| 50 | S&Fin repair 15 mm borefancy type health faucet with SS hose complete all as specified. |
| 51 | S&Fin repairTubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed. |
| 52 | Supply and fix 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 53 | Supply and fix 30 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete |
| 54 | S&F in repairs 2400x600mm 5mm thicklooking mirror with bevelled edges and straight edges of selected quality glass mounted on fixed chromium plated studdscomplete all as directed by the Engr-in-Charge. |
| 55 | Vitreous China soap tray embedded in the wallSoap dish, vitreous China white, approximate size 160x 160x90mm |
| 56 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 57 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, platforms, urinal partitions and like in cement mortar (1:4) includingcutting to required shape,pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 58 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 59 | All as per item above but 20mm bore |
| 60 | All as per item above but 25mm bore |
| 61 | S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed. |
| 62 | All as per item above but 20mm bore |
| 63 | All as per item above but 25mm bore |
| 64 | S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed. |
| 65 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 66 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 67 | S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 68 | S&F PVC (SWR) bends of 110mm bore |
| 69 | S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement |
| 70 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement. |
| 71 | Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, haunching and benching etc including necessary formwork all as specified and as directed. |
| 72 | Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 73 | Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs (for man holes etc) set in CM 1:6 including all necessary formwork all as specified and as directed. |
| 74 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and as directed. |
| 75 | Rienforced concrete 150mm internal dia of pipes, class NP3 laid and jointed complete with collars all as specified and as directed. |
| 76 | M&LConcrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; inCement Concrete 1:3:6 Type C-2 all as specified and as directed. |
| 77 | Taking down Chowkhats or frames withshutters exc 1.5 sq. m but n exc 4 sq. m each |
| 78 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach |
| 79 | S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge |
| 80 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face |
| 81 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge |
| 82 | S&F 125 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 83 | S&F 100 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 84 | S&F secondclass hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, |
| 85 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 86 | 100mm Butt hinges,medium weight, cold rolled mild steel, and fixed |
| 87 | S&F 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 88 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 89 | M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 90 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 91 | S&F Powdercoated aluminium door,window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 92 | S&F 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge |
| 93 | S&F 200 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 94 | S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 95 | S&F 5.5mm Sheet glass, selected quality, in squares nexc. 0.5 sq. m each pane complete all as specified. |
| 96 | M&L Prelaminated particle board 12mm thick, interior grade, prelaminated on both sides side with decorative choice lamination fixed with screws to timber frame work |
| 97 | Demolition of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including frame work,cover fillets |
| 98 | M&L in repairfor Providing and fixing Semi Perforated particle boards or tiles 12mm thick in ceiling for insulation and accoustic purposes, 60cm x 60cm in sizefixed with screw as per manufacturers instructions complete all as directed. |
| 99 | Dismantling of Wall panelling and similar work including frame work |
| 100 | M&L for 3mm thick wall care putty on wall complete all as specified |
| 101 | M&L for 3mm thick wall care putty on ceiling complete all as specified |
| 102 | M&L 2 coats ofOil bound distemper over a coat of primer on walls withwhite or tinted complete all as specified |
| 103 | M&L 2 coats ofOil bound distemper on a coat of primer on ceiling withwhite or tinted complete all as specified |
| 104 | M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 105 | M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 106 | Suppply and filling 25mm thick preformed filler for expansion/crumple joints including making goodand removal/ fixing of metal sheet on wall complete all as specified and directed |
| 107 | Providing cast-in-situ reinforced cement concreteType B1 1:2:4 (20mm graded aggregate) in copings,columns, etcincluding use of form work (straight or curved), including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 108 | M&L for Mild steel TMT bars6 mm to 8 mm diaand ., cut to length, bent to shape required including crancking ,benddingwith mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as speified and as directed . |
| 109 | Removing demolished material / rubbishexc.1.50km and depositing wheredirected at a level n exc 5 km above the starting point |
| 110 | Taking down copper/ aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc. including paint tuch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 111 | Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosureand making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge. |
| 112 | Taking down Existing old UNSV submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so asto match with the existing finishes all as specified and as directed by the Engineer -in- charge . |
| 113 | M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor, 1100 volts grade single core PVC insulated and unsheathed cable drawn through newPVC conduit/ casing cappingof suitable size but not less than 20 mm dia in consealed of stone/concrete wall /roofetc allas per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour codingand pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting, 60 mm deep coveredincluding laminated sheet, required sizes switch modular covers or 3 mm thick laminated hylam sheet fixed with cadmium plated screws/ PVC gang box fully enclosed type for mounting switches, sockets, fan regulator, etcincluding making good the disturbed surfacesof walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 114 | a)One light point controlled by one switch. |
| 115 | b)One 3 pin 6 Amps socket point controlled by one switch on same board. |
| 116 | c)One 3 pin 6 Amps socket point controlled by one switch on independent board. |
| 117 | d)One ceiling fan point controlled by one switch and regulator. |
| 118 | All as per item No. 5 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F in replacement of switch Modular type single pole one way6 Amps 240 volts complete all as specified and as directed. |
| 120 | S&Fin replacement ofsocket2 in 1,3 pin 6 Amps, modular type, universal ,240 volts completeall as specified and as directed |
| 121 | S&F in replacement of switch Modular type single pole one way16 Amps 240 volts complete all as specified and as directed. |
| 122 | S&Fin replacement of socket 2 in 1,3 pin 6/16 Amps, modular type, universal ,240 volts completeall as specified and as directed |
| 123 | S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz2 module size in 5 stepsmodular type complete all as specified and directed. |
| 124 | S&F in replacement of ceiling rose 6 A, 3 plate,PVC/ polycarbonate, insulated body 240 Volt , 50 Hz all as specified and as directed. |
| 125 | M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Conduit/ casing capping maintaning the colour coding as per electric rules and all required accessories of suitable size consealedion wall/roofcomplete all as specified and directed by Engineer-in-Charge. Note:Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length. |
| 126 | All as per item above here-in-before but with 5 x 6.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 6.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length. |
| 127 | Supply and fix MCB distribution board double door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F MCBTriple pole and Neutral (TPN) of capacity 40-100 Amps 415 volts ,breaking capacity 10 KA,"C" series ,fixed in proper position all as directed by the Engineer in charge . |
| 129 | Supply and fix MCB, SPN, 40-63 Amps, 240 Volts |
| 130 | Supply and fix MCB , SP, 6 - 32 Amps, 240Volts |
| 131 | Supply & fixing in replacement ofhigh efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free lightand good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessoriesincluding connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Philips/ Bajaj |
| 132 | Refixing only of tube light/ LED fittings retrieved from site after cleaning complete of any type or capacity including all fixing accessories including connecting up with three core twisted flexible copper conductor cable up to 3 Mtrs length with suitable size complete all as specified and directed by Engineer-in-Charge. |
| 133 | Supply & fixing in replacement ofhigh efficacy Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integral electronic low THD (<10%) LED driver 18 W LED, Ceiling cutout: Ø 175 mm, height 90 mm complete with all accessoriesincluding connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Cat Part No- INTEGRANEODLR18WLED865S of Havells or equivalent make in Philips/ Bajaj. |
| 134 | Supply & fixing wall mounted new E-Lite LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10W LED 6500K (2ft) complete with all accessoriesincluding connecting up with three core twisted flexible copper conductor cable with suitable size complete including taking down old U/s fittings all as specified and directed by Engineer-in-Charge. Make:- Havells/Philips/ Bajaj |
| 135 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers including all fixing accessories all as specified and directed by the Engineer-in-Charge. Make:- Havells/Usha/ Bajaj |
| 136 | Supply and fixing ceiling fans complete with blades, down rods and accessories such as hook for fixing to ceiling, nut, bolts, washers, pins etc. 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including all fixing accessories all as specified and directed by the Engineer-in-Charge. Make:- Havells/Usha/ Bajaj |
| 137 | M&L for cutting round holes suitable for fixing exhaust fan of size 300 mm into or through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 to external/ internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. |
| 138 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, includingreplacement of wornout/defective parts, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. |
| 139 | Disconnecting and removing EXHAUST FAN of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughlyprovision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of exhust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. |
| 140 | S & F in replacement of louvers with suitable frame work and fixing arrangements forexhaust fan of any size sweep complete including removing the existing unserviceable one all as specified and directed by the Engineer-in-Charge. |
| 141 | Supply and fix in repairLED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by Engineer-in-Charge. |
| 142 | M&L GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Street Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed. |
| 143 | Taking out ACs from site and depositing to E/M Store yard with complete accessories and refixing to the building after completion of the repair works including maintenance of the complete AC indoor unit and out door unit including filling of the Gas if required at the time of commissioning of the unit. The quoted rates willl be inclusive of replacement of the items damaged by the labour during desmantaling or transpotation. |
| 144 | Supply and fixsheet metal powder painted double pole enclosure with a two pin and earth plug and socket flushing in wall including 20 Amps rated double pole MCB 10 KA, "C" curve complete all as specified and directed by Engineer-in-Charge. |
| 145 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete including all accessories required. |
| 146 | Supply and install voltage stabilizer for voltage regulation input 150 - 285 V out put voltage 240 (+/- 2%) suitable for AC of capacity 1.5 TR complete including all accessories required for installation as directed by Engr-in-Charge. |
| 147 | Supply and fix hand dryer electric driven, single phase of 1450 Watts capacity with sensor range maximum 8 cm of size 32x23x13 Cm complete including all accessories required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
