|
| 1 | Details |
| 2 | Fixed Chair : Fixed Visitor Chair, Overall Dimension: 530W ±10 x 580D ±10 x 840H ±10 mm,Seat & Back of chair is made 12mm thick hot pressed plywood cushioned with PU moulded foam Fabric upholstery, PVC beading used in seat & back, Seat & Back fixed with MS Powder coated Plate, Used PU foam on Seat of D-45 kg/m3, Used Foam on Back of D-45 kg/m3, Seat Size: 460W ±10x 405D ±10 x 60Thick. ±5 mm, Back Size: 460W ±10 x 415H ±10 x 60Thick. ±5mm,Armrest: Armrest made of Good Quality Injection moulded PPCP cover fixed with 16gauge powder coated round Pipe of 25.4mm, Armrest fixed with seat & Back,Under structure: Cantilever frame made of 25.4mm round pipe with 14 gauge thickness duly powder coated with Plastic bushes . |
| 3 | Revolving Chair:: Medium Back Revolving Chair,OverallDimension:- 715W:1:10 x 715D :1:10 x 1020H :1:10 mm .Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3 ,Back of Medium back chair is made of Injection moulded PP material structure in Black colour upholstered with Mesh fabric ,Seat Size: 510W :1:10 x 510D :1:10 x 60Thick. :1:5 mm , Back Size:-460W :1:10 x 490H :1:10Mechanism:- Centre Tilt Mechanism Single point control,Pmvides maximum adjustability and scope for comfort , Seat & Back are fixed together with arms & whole structure moves together in one direction , Single/ Upright position locking ,Tilt tension knob to loosen or tighten the tension according to users body weight .Gaslift:- Lift -Used gaslift of 85 mm size of Class- IV grade , Pllastic Gas lift cover .Armrest:- Fixed PP armrest in Black colour, seat & back connected with arms .Chair Base & Wheels:- Revolving Pedestal metalinserted PPCPbase consists of 5 prongs with 660:1:5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor |
| 4 | Almirah:: Overall Size 915W X 485D X 1980H , Top , Bottom , Side panel & Shelve made up of 0.8mm thick CRCA sheet Powder Coated , Legs made up of 0.8mm thick CRCA sheet powder coated , shutter made up of 1mm thick CRCA sheet powder coated , No Sharp Edges Of AlmirahEnds , All Shelve Rack Divided Into Equal Parts , Door Die cast Chrome Plated Handles Fitted With Washer & Double Nut , Handles Ring Made OfPVC Cap , Almirah All Metallic PanelsScrew With Nut & Bolt , All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations with CO2 Welding Shall Be Used , CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating . |
| 5 | SLOTTED ANGLE RACK :: Slotted Angle Rack Overall size :- 900WX450DX1800H mm,Angle made up of CRCA 40X40X2mm thick duly powder coated,Shelve made up of CRCA 0.8 mm thick duly powder coated,Corner Plate made up of CRCA 1 mm thick duly powder coated,Slotted Angle Rack should be supplied in Knock-down condition , high quality PPCP Shoes should be used on bottom to avoiding scratches on the floor , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 Microns . |
| 6 | Three Seater Waiting Chair ::Dimensions : 200x60x30 cm, Chrome Plated, No. of Seats -3,heavy-duty steel frame that is strong and stable. The frame is powder coated for added strength and durability and features adjustable legs for a perfect fit. The chair also features a breathable mesh backrest and upholstered armrests for extra support and comfort. |
