Tender For Autoclave, Bhopal-Madhya Pradesh

Tender For Autoclave 1 Volume 500 ml 01 2 Material of Construction SS 316 3 Design pressure 200 bar 4 Design temperature 500°C 5 Head mounting style Removable head and vessel design 6 Heating External Electrical ceramic band heater with insulation with high temperature steel cladding & provision to connect heater temperature sensor. It shall have Insulated heater plate to prevent thermal shock to operator. Cascade temperature controller to prevent temperature over shoot. 7. Motor & drive ¼ hp ex-proof gas group IIB motor (zone 1) with 100-1450 RPM 8 Shaft sealing Zero leakage Magnetic drive coupling, (M-40) Material of Bush- carbon filled PTFE (CFT) 9 Stirrer 2 stage 6-bladed turbine stirrer with catalyst basket 10 Standard fittings External Valves & Fittings: • Pressure gauge with vacuum protection • Safety rupture disc (Inconel) with vacuum protection • Gas /Nitrogen inlet valve & liquid sampling valve mounted on common dip tube • Vent needle valve Internal Fittings: • Helical cooling coil • Thermowell (with RTD PT100 temperature sensor) • Dip tube 11 Gasket Complete grafoil gasket 12 Closure type Split clamp with clamp bolts 13 Control Panel SS Control panel with, • Programmable P.I.D temperature controller with high temperature alarm • Variable frequency drive for motor speed control. 14 Auto-cooling system Auto-cooling system with water pump, for forced cooling SS tank & hose pipes for exothermic reaction & faster cooling. 15 Water Pump and 10 Ltr. Tank Water Pump and 10Ltr. Tank with tubing to cool the magnetic drive, pressure sensor etc.by water recirculation to save water 16 Mounting SS Trolley 17 Pressure Regulator for H2 gas for 0-140bar cylinder pressure with inlet & outlet pressure gauge, flexible 4m hose pipe, non-return valve & adaptor for N2/O2/ air gas cylinder. 18 Digital pressure indicator in bar & psi with SS-316 Pr. Transmitter & high-pressure alarm in addition to analog pressure gauge 19 Power supply Accesories should be supplied by the supplier, if required 20 Warranty i) One year, from the date of installation ii) In warranty period any brakedown/trobleshome must be attended by the supplier iii) During the warranty period non-functioning parts must be supplied free of cost 21 Installation and commissioning i) Installation and commissioning should be done by engineers of the suppliers. ii) Performance criteria of the system as specified by the supplier should be proven after commissioning.

Refer document

Refer document

INR 8 Lakhs /-