Military Engineer Services-MES has published Tender For Special Repair Replacement Of Lt Oh Lines To Lt Ug Cable Of Area Under Transformer No 1 At 6Ttr Ponda Goa. Submission Date for this Tender is 09-01-2024. LT Cable Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-01-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specifiedand directed . |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed. |
| 3 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed. |
| 4 | Supply and Laying DWC HDPE pipe of outer dia of 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed. Make: Rex Polyextrusion Ltd/ Finolex/Supreme/ Prince/ Astral as approved by GE in writing. |
| 5 | Supply and fix DWC HDPE coupler of dia of 50mm complete all as specified and directed. Make: Rex Polyextrusion Ltd/ Finolex/Supreme/ Prince/ Astral as approved by GE in writing. |
| 6 | Material and Labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed. |
| 7 | Material and Labour for PCC work 1:3:6 (type C-2) using 40 mm graded mechanically crushed stone aggregate as in foundation of stay / coping of poles/filling of cutting on road including necessary form work and fare finish to exposed surfaces without using extra cement etc. complete all as specified and directed. |
| 8 | Supply, lay and connect cable XLPE Insulated screenedPVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. Make: Havells/ Polycab/ Gloster/ Universal Cables Ltd |
| 9 | All as per item No. 8, but of size 25 sq mm 3.5 core |
| 10 | All as per item No. 8, but of size 35 sq mm 3.5 core |
| 11 | All as per item No. 8, but of size 50 sq mm 3.5 core |
| 12 | All as per item No. 8, but of size 70 sq mm 3.5 core |
| 13 | Supply and Fix cross arms, bracings , brazing stiffness, supports clamps and back plated fabricated from structural steel section including nuts, bolts and washers ,welding ,bending , cold or hot drilling holes of any shape and size as directed including two coat of aluminium paint (under and finishing coat ) over a coat of red oxide or primercomplete all as specified and directed. |
| 14 | Supply and fixing bracket made out of 40 mm dia GI medium grade tubing 1.2 metre long and bent to shape at 120 degree angle at the middle from vertical, fixed with clamps nuts and bolts, washer including removing old bracket and refixing LED street light fitting complete all as specified and directed. Note:-Clamps, nut, bolts and washers will be measured and paid separately. |
| 15 | Supply & Installation of SMC terminal/junction box of size 200 x 140 x 95 ofpolycarbonate thermoplastic housing, weather, water proof fire retardant including 04 Nos terminalon LT poles complete all as specified and directed. Make : Sintex/National Note : MS Clamps, nuts, bolts required to fixing on pole shall be measured and paid separately. |
| 16 | Supply and fixing 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS, ISI marked of size 2 x 2.5 Sqmmand 1 x 2.5 sqmm for connection purpose drawing throughand included 20mm dia PVC pipe / conduitfixed on pole by means of suitable clamp complete all as specified and directed. Note : Clamp will be measured under appropriate item under BOQ. |
| 17 | Material and Labour for earthing complete for LT Panels with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres belownormalgroundlevel,connected with and including GI strip 32x6 mm in andincluding GI pipe 20mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around includingtop and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified and directed. |
| 18 | Supply and fix GI pipe 80 mm bore medium grade for protection of cable including provision of PVC heavy duty bends complete for fixing alongGI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred. |
| 19 | All as per Item No. 18 above but for 50 mm bore. |
| 20 | All as per Item No. 18 above but for 40 mm bore. |
| 21 | Taking down cross arms, channels, angle iron, clamps, nut, bolts, stay wire, stay assembly, GI wire etc complete all as specified and directed. |
| 22 | Taking down stay assembly complete all as specified and directed. Note:-Exceeding will be measured separately underrespective item |
| 23 | Taking down old LT cable of any size 25/35/50 Sqmm 3.5 core complete all as specified and directed. |
| 24 | Taking down old LT cable of size 6/10 Sqmm 2 core complete all as specified and directed. |
| 25 | Dismantling insulators any type, any size from existing LT poles/ street light feeders complete all as specified and directed. |
| 26 | Dismantling of ACSR or AAC conductors from existing over head feeders complete all as specified and directed. |
| 27 | Supply, install, testing and commissioning of CPRA approved Feeder pillar, outdoor cubicle type weather andvermin prooftotally enclosed made out of 3 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hzdouble door with front and rear openablewith locking arrangement including frame of panel with angle iron of size 50 x 50 x 6mm, inner shutters for mounting switchgears etc, independent bottom gland plate for each incoming & outgoing cable of suitable size as per switchgear rating, having apron on 3 sides of panel from base to ground level prewired complete duly powder coated with 7 tank process comprising with following complete all as specified and directed.:- (i) Bus bar strip,four pole and capacity 250 Amps copper strip of suitable sizebased on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow, blue and black) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : - (a) MCCB 80 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) Panel meters with LCD display -1 No ; (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-01 set (iii) OUTGOING:- (a) MCCB 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -02 Nos.; (c) MCB SPN 40 Amp, 240 V, 10 KA, C-Curve - 05 Nos.; (d)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-03 sets |
| 28 | Supply, install, testing and commissioning of CPRA approved Feeder pillar, outdoor cubicle type weather andvermin prooftotally enclosed made out of 3 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hzdouble door with front and rear openablewith locking arrangement including frame of panel with angle iron of size 50 x 50 x 6mm, inner shutters for mounting switchgears etc, independent bottom gland plate for each incoming & outgoing cable of suitable size as per switchgear rating, having apron on 3 sides of panel from base to ground level prewired complete duly powder coated with 7 tank process comprising with following complete all as specified and directed.:- (i) Bus bar strip,four pole and capacity 250 Amps copper strip of suitable sizebased on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleeves in four colours (Red,Yellow , blue and black ) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : - (a) MCCB 125 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) Panel meters with LCD display ; (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-01 set (iii) OUTGOING:- (a) MCCB 80 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) MCCB 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -03 Nos.; (c) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -02 Nos.; (d) MCB SPN 40 Amp, 230 V, 10 KA, C-Curve - 14 Nos.; (e)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-06 sets |
| 29 | Supply, install, testing and commissioning of Feeder pillar, outdoor cubicle type weather andvermin prooftotally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hzdouble door with front and rear openablewith locking arrangement including frame of panel with angle iron of size 50 x 50 x 6mm, inner shutters for mounting switchgears etc, independent bottom gland plate for each incoming & outgoing cable of suitable size as per switchgear rating, having apron on 3 sides of panel from base to ground level prewired complete duly powder coated with 7 tank process comprising with following complete all as specified and directed.:- (i) Bus bar strip, four pole and capacity 160 Amps copper strip of suitable size based on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleeves in four colours (Red,Yellow, blue and black) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : - (a) MCCB 80 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) Panel meters with LCD display;(c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-01 set (iii) OUTGOING:- (a) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -03 Nos.; (b) MCB DP 40 Amp, 240 V, 10 KA, C-Curve - 14 Nos.; (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-03 sets |
| 30 | Supply, install, testing and commissioning of Feeder pillar, outdoor cubicle type weather andvermin prooftotally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hzdouble door with front and rear openablewith locking arrangement including frame of panel with angle iron of size 50 x 50 x 6mm, inner shutters for mounting switchgears etc, independent bottom gland plate for each incoming & outgoing cable of suitable size as per switchgear rating, having apron on 3 sides of panel from base to ground level prewired complete duly powder coated with 7 tank process comprising with following complete all as specified and directed.:- (i) Bus bar strip,four pole and capacity 100 Amps copper strip of suitable size based on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleeves in four colours (Red,Yellow , blue and black ) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : - (a) MCCB 63 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) Panel meters with LCD display ; (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-01 set (iii) OUTGOING:- (a) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -02 Nos.; (b) MCB DP 40 Amp, 240 V, 10 KA, C-Curve - 08 Nos.; (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-02 sets |
| 31 | Supply, install, testing and commissioning of Feeder pillar, outdoor cubicle type weather andvermin prooftotally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hzdouble door with front and rear openablewith locking arrangement including frame of panel with angle iron of size 50 x 50 x 6mm, inner shutters for mounting switchgears etc, independent bottom gland plate for each incoming & outgoing cable of suitable size as per switchgear rating, having apron on 3 sides of panel from base to ground level prewired complete duly powder coated with 7 tank process comprising with following complete all as specified and directed.:- (i) Bus bar strip,four pole and capacity 100 Amps copper strip of suitable size based on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleeves in four colours (Red,Yellow, blue and black) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : - (a) MCCB 125 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) Panel meters with LCD display;(c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-01 set (iii) OUTGOING:- (a) MCCB 80 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (b) MCCB 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -01 Nos.; (c) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -01 Nos.;(d) MCB DP 40 Amp, 240 V, 10 KA, C-Curve - 08 Nos.; (e)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three-03 sets |
| 32 | Outdoor type busbar chamber of suitable size made of 3.15mm thick CRCA sheet with double door and locking arrangementincluding 4 Nos of copper busbar of 200 Amps and 04 Nos angle iron frame of size 40x40x5mm including one MCCB 125 Amp 4 Pole for incoming supply and 80 A MCCB -01 No,63 A MCCB-01 No, 40 Amp SPN- 02 Nos as complete all as specified and directed. |
| 33 | Outdoor type busbar chamber of suitable sizemade of 3.15mm thick CRCA sheet with double door and locking arrangementincluding 4 Nos of copper busbar of 100 Amps and 04 Nos angle iron frame of size 40x40x5mm including one MCCB 40 Amp 4 Pole for incoming supply and40A MCB SPN-05 Nos as outgoing complete all as specified and directed. Note : - (i) For MCCB"sin all LT Panels ultimate breaking capacity should be equal to service breaking capacity. (ii) Drawing of LT panels shall be got approved from GE before placement of order. |
| 34 | Material and labour for fixing cable route indicators made of PCC (1:2:4) duly engraved “MES LT CABLE" /"LT CABLE JOINT"coloured with two coats of synthetic paint in brown of size 150 x 150 x 900 mm fixed 300mm below ground level complete all as specified and directed. |
| 35 | Supply and fixing 240V, 10 KA "C" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 AMP, in junction box Complete with connection testing and commissioning complete all as specified and directed. |
| 36 | Supply and fix Heat shrinkable straight through joint suitable for 1100 KV XLPE/ PVC cable of size6 to 16 sqmm 3.5 core. Make: Denson / 3M/ Raichem |
| 37 | Supply and fix Heat shrinkable straight through joint suitable for 1100 KV XLPE/ PVC cable of size25 to 50 sqmm 3.5 core. Make: Denson / 3M/ Raichem |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
