Tender For Repair/Maintenance Of Certain Wooden Furniture Articles At Ge Gwalior, gwalior-Madhya Pradesh

Tender For Repair / Maintenance Of Certain Wooden Furniture Articles At Ge Gwalior; 1 Table Bed Side : Fd-28, Fd- 210, Fd- 248, Fd-276 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 2 Removing Of Old U / S Top From Table Bedside And S & F New Top Made Out Of 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 04Mm Thick Teak Wood Beadingall-Around The Top Of Side Board All As Shown On Drg And As Directed. 3 Replacement Of Side Of Table Bed Side With S&F New Sides With 12 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading. 4 Replacement Of Shelf & Bottom With S&F 12 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Beading. 5 Replacement Of Back Ply Of Table Bed Side With S&F New Back Ply With 6 Mm Thick Commercial Ply Wood. 6 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Bed Side With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 7 Peg Table : Fd-25 ( M ) , Fd-236, Fd-277, Fd-384 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 8 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 9 Replacement Of Leg With S&F New Teak Wood Leg Made To Shape. 10 Replacement Of Long Rail With S&F New Teak Wood Long Rails Made To Shape. 11 Replacement Of Short Rails With S&F New Teak Wood Short Rails Made To Shape. 12 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing Complete All As Shown On Drg. Complete All As Specified And Directed. 13 Polishing One Coat To Old And Two Coats To Old New Surfaces To Peg Table With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 14 Table Center : Fd-29 ( M ) , Fd-235, Fd-274 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 15 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 16 Replacement Of Leg With S&F New Teak Wood Leg Made To Shape. 17 Replacement Of Long Rail With S&F New Teak Wood Long Rails Made To Shape. 18 Replacement Of Short Rails With S&F New Teak Wood Short Rails Made To Shape. 19 Replacement Of Stiffener With S&F New Teak Wood Stiffener Made To Shape. 20 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing. 21 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Center With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 22 Teapoy : Fd-34 ( M ) , Fd-232, Fd-278, Fd-382 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Teapoy. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 23 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 24 Replacement Of Leg With S&F New Teak Wood Leg Made To Shape. 25 Replacement Of Long Rail With S&F New Teak Wood Long Rails Made To Shape. 26 Replacement Of Short Rails With S&F New Teak Wood Short Rails Made To Shape. 27 Replacement Of Stiffener With S&F New Teak Wood Stiffener Made To Shape. 28 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing 29 Polishing One Coat To Old And Two Coats To Old New Surfaces To Teapoy With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 30 Table Dressing Gents : Fd-31 ( M ) , Fd-230, Fd-379 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table Dressing Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 31 Replacement Of Old Existing Broken Top Of Table Dressing Gents Of Any Description With S&F New Top Of 12 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With And Including 3Mm Thick Teak Wood Beading Alround Made To Shape, Fixed In Position. 32 Replacement Of Side With S&F New Side Of 12Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge Including 3Mm Thick Teak Wood Beading Alround, Made To Shape, Fixed In Position. 33 Replacement Of Bottom With S&F New 12Mm Thick Ply, Teak Veneered On One Side And Commercial On Other Side Grade I ( Bwr Resin ) Made To Shape Fixed In Position. 34 Replacement Of Drawer With S&F New Drawer Made To Shape Fixed In Position. 35 Replacement Of Back Frame With S&F New Back Frame With 6Mm Thick Commercial Ply Grade I Bwr Grade Made To Shape Fixed In Position. 36 Replacement Of Knob With S&F New Chromium Plated Knob 25Mm Dia, 24Mm Length As Approved By The Engineer-In-Charge Of Best Quality. 37 Replacement Of Mirror With S&F New Mirror Of Size 380Mm X 760Mm X 5.5Mm Thick Made To Shape Fixed In Position, All As Shown On Drg, Specified And Directed By The Engineer-In-Charge 38 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Dressing Gents With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 39 Table Dressing Ladies With Mirror : Fd-32, Fd-251 S & F Following Components Of Table Dressing Including Dismantling Taking Out Carefully & Replace Old Components Of Table Dressing. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 40 Replacement Of Knob With S&F New Chromium Plated Knob 25Mm Dia, 24Mm Length As Approved By The Engineer-In-Charge Of Best Quality. 41 Replacement Of Legs Of Table Dressing Ladies With S&F New Legs Of Ist Class Hw ( Mp Teak Wood ) . 42 M & L For Replacement Of U / S 6Mm Thick Back Ply Wood Of Mirror. 43 M & L For Replacement Of U / S Stiffener Between Legs. 44 Replacement Of Broken Top Of Table Dressing Ladies Of Any Description With S&F New Top Table Dressing Ladies Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade, Bwp ( Natural Teak Wood Shade ) , Made To Shape, Fixed In Position 45 Replacement Of Side Oftable Dressing Ladies With S&F New Side Of Table Dressing Ladies With Teak Wood Veneered One Side & Commercial On Other Side. 46 Replacement Of Bottom Commercial Ply With Teak ( Veneered One Side ) Commercial Other Side ) With S&F New Bottom Commercial Ply With Teak Veneered One Side ( Commercial Other Side ) . 47 Replacement Of Drawer Of Table Dressing Ladies With S&F New Drawer As Per Drg 48 Replacement Of Side Long Rail Jointed To Leg Of Table Dressing Ladies With S&F New Side Long Rail Jointed To Leg Of Ist Class Hw ( Mp Teak Wood ) . 49 Replacement Of Short Rail Of Table Dressing Ladies With S&F New Short Rail Of Ist Class Hw ( Mp Teak Wood ) . 50 Replacement Of Back Oftable Dressing Ladies With S&F New Back Of Table Dressing Ladies With Teak Wood Veneered One Side & Commercial On Other Side. 51 Removing Old Broken / U / S Sliding Glass From Table Dressing Ladies And S & F New 5.5Mm Thick Sheet Glass With Plastic Handle As Per Sample, Shape And Size Shown In Drawing Complete All As Specified And Directed. 52 Removing Of Old U / S Looking Mirror From Table Dressing Ladies And S & F New Looking Mirror Of Size 1220 X 366 X 5.5Mm Thick Made To Shape Fixed In Position, All As Shown On Drg, Specified And Directed By The Engineer-In-Charge 53 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Dressing Ladies With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 54 Table Dining For 6 / 4 Persons : Fd / Map-Ii / 03 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 55 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 56 All As Per Srl Item No. 7.01 Here-In-Before But Top Of Table Dining 4 Persons. 57 L-Shape Wooden Corner Of Size 4 X 4 X 1 To The Table Between Legs And Rail To Be Fixed With Screw. 58 Replacement Of Leg With S&F New Teak Wood Leg Made To Shape 59 Replacement Of Long Rail Of Table Dining 6 Persons With S&F New Teak Wood Long Rails Made To Shape 60 Replacement Of Long Rail Of Table Dining 4 Persons With S&F New Teak Wood Long Rails Made To Shape 61 Replacement Of Short Rails With New Teak Wood Short Rails Made To Shape 62 S & F New Nylon Buffer Of Superior Quality With Suitable Screws For Fixing. 63 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Dining 6 Persons With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 64 All As Per Srl Item No. 7.09 Here-In-Before But Table Dining 4 Persons. 65 Table Dining 6 / 8 Persons : Fd-30, Fd-239, Fd-273, Fd-376, Fd-1115 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 66 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 67 All As Per Item 8.01 Here In But Top Of Table Dining 6 Persons 68 Replacement Of Leg With S&F New Teak Wood Leg Made To Shape 69 Replacement Of Long Rail With S&F New Teak Wood Long Rails Made To Shape Of Table 8 Person 70 Replacement Of Short Rails With New Teak Wood Short Rails Made To Shape 71 Replacement Of Stiffener With S&F New Teak Wood Stiffener Under The Top Joining The Top Long Side Of Top Rails Of Table Dining. 72 Replacement Of Long Rail With S&F New Teak Wood Long Rails Made To Shape Of Table 6 Person 73 L-Shape Wooden Corner Of Suitable Size To The Table Between Legs And Rail To Be Fixed With Screw. 74 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing Complete All As Shown On Drg, Specified And Directed. 75 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Dining 8 Persons With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 76 All As Per Itemno 8.10 Here In But Top Of Table Dining 6 Persons 77 Table 900 Mm X 600 Mm Or ( 3 X 2 ) ( Wooden ) W / O Drawer : Fd-42, Fd-55, Fd-223, Fd-231, Fd-284 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 78 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 79 Replacement Of Legs Of Table S&F New Leg Made Out Of Ist Class Hw ( Teak Wood ) 80 Replacement Of Table FrameS Rail With S&F New Table FrameS Long Rail Made Out Of Ist Class Hw ( Teak Wood ) . 81 S & F New Stiffener. 82 Replacement Of Table FrameS Rail With S&F New Table FrameS Short Rail Made Out Of Ist Class Hw ( Teak Wood ) . 83 Replacement Of Rubber Shoe With Screw ( Steel ) With S&F New Nylon Buffer Of Superior Quality Screws ( Steel ) Of Suitable Size. 84 Replacement Rectangutar Braket With 08 Nos Steel Screws Suitable Size Of Ist Class Hard Wood ( Teakwood ) Of Size 100 Mm X 100 Mm X 25Mm. 85 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table 3X2 With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 86 Table 900 Mm X 600 Mm With Drawer ( 3 X 2 ) ( Wooden ) : Fd-41, Fd-224, Fd-283 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 87 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 88 Replacement Of Legs Of Table S&F New Leg Made Out Of Ist Class Hard Wood ( Teak Wood ) 89 Replacement Of Table FrameS Rail With S&F Newtable FrameS Long Rail Made Out Of Ist Class Hard Wood ( Teak Wood ) . 90 Replacement Of U / S Drawer With New Drawer Of Same Size And Shape To Table. Front Of The Drawer Shall Be Made Out Of 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge And Including Aluminium Anodized Knob. Sides, Base And Back Of Drawer Made Out Of 12Mm Thick Ply Wood ( Isi Marked ) And Fixing All As Shown In Drg 91 S & F New Stiffener. 92 Replacement Rectangutar Braket With 08 Nos Steel Screws Suitable Size Of Ist Class Hard Wood ( Teakwood ) Of Size 100 Mm X 100 Mm X 25Mm. 93 Replacement Of Rubber Shoe With Screw ( Steel ) With S&F New Nylon Buffer Of Superior Quality Screws ( Steel ) Of Suitable Size. 94 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table 3X2 With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 95 Chair Dining ( Jco / Ors ) : Fd / Map-Ii / 05 S & F Following Components Of Chair Including Dismantling Taking Out Carefully & Replace Old Components Of Chair. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 96 Replacement Of Old U / S Front Leg From Existing Chair Dining And S & F Same Size New Front Leg Made Out Of Ist Class Hard Wood Teak To Chair Dining. 97 All As Per Srl Item No. 11.01 Here-In-Before But Rear Leg Of Chair Dining. 98 All As Per Srl Item No. 11.01 Here-In-Before But Front / Back / Side Rail Of Chair Dining. 99 All As Per Srl Item No. 11.01 Here-In-Before But Back Rest ( I.E. Horizontal Wooden Members For Back Rest Of Size 45Mm X 35Mm ) Of Chair Dining. 100 All As Per Srl Item No. 11.01 Here-In-Before But Stiffener Between Front Leg To Rear Leg Of Chair Dining. 101 All As Per Srl Item No. 11.01 Here-In-Before But Stiffener For Jointing To Side Stiffener Of Chair Dining. 102 Removing Of Old U / S / Broken Pvc Seat From Chair Dining And S & F New Pvc Seat 4Mm Thick In Single Piece All As Per Shape And Size Shown On Drg And As Directed. 103 S & F New Nylon Buffer Of Superior Quality With Suitable Screws For Fixing Complete All As Shown On Drg, Specified And Directed. 104 Polishing One Coat To Old And Two Coats To Old New Surfaces To Chair Dining With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 105 Dressing Table ( Ladies ) Including Stool Fd / Map-Ii / 07 S & F Following Components Of Table Dressing Including Dismantling Taking Out Carefully & Replace Old Components Of Table Dressing. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 106 Replacement Of Handle With S&F New Chromium Plated Handle As Approved By The Engineer-In-Charge Of Best Quality. 107 M & L For Replacement Of U / S Sliding Channel. 108 M & L For Replacement Of U / S 6Mm Thick Back Ply Wood Of Mirror. 109 Replacement Of Back Oftable Dressing Ladies With S&F New Back Of Table Dressing Ladies With Teak Wood Veneered One Side & Commercial On Other Side. 110 Replacement Of Broken Top Of Table Dressing Ladies Of Any Description With S&F New Top Table Dressing Ladies Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade, Bwp ( Natural Teak Wood Shade ) , Made To Shape, Fixed In Position 111 Replacement Of Side Oftable Dressing Ladies With S&F New Side Of Table Dressing Ladies With Teak Wood Veneered One Side & Commercial On Other Side. 112 Replacement Of Door Shutter Of Table Dressing Ladies With S&F New Door Shutter As Per Drg 113 Replacement Of Drawer Of Table Dressing Ladies With S&F New Drawer As Per Drg 114 Replacement Of Wheels Of Table Dressing Ladies With S&F New Wheels As Per Drg 115 Replacement Of Hinges Of Table Dressing Ladies With S&F New Hinges As Per Drg 116 Replacement Of Magnetic Catcher Of Table Dressing Ladies With S&F New Magnetic Catcher As Per Drg 117 Replacement Of Cushion Of Stool Dressing With S & F Pu Foam Cushion With 40 Density With Tapestry Cloth As Approved By Eic / Ge Of Rate Not Less Than Rs 300 / Rm. 118 Removing Of Old U / S Looking Mirror From Table Dressing Ladies And S & F New Looking Mirror 5Mm Thick Made To Shape Fixed In Position, All As Shown On Drg, Specified And Directed By The Engineer-In-Charge 119 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Dressing Ladies With French Polish Of Approved Make And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 120 Bed Ply Wood Top ( Hard Bed ) : Fd-246 S & F Following Components Of Bed Including Dismantling Taking Out Carefully & Replace Old Components Of Bed. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 121 Dismantling, Taking Out Carefully Old Existing Ply Wood Of Any Description And Replacement Of The Same With S&F New Ply Wood, 12Mm Thick, Commercial On Both Side, Bwr Grade Of Size ( As Shown On Drg ) Fixed With Steel Screws Made To Shape Fixed In Position Complete All As Shown On Drg, Specified And Directed. 122 Replacement Of Ply Wood On Both Side Of Head Rest Frame With S&F New 3.5Mm Thick Ply Wood One Side Teak Veneered & Other Side Commercial Grade - I ( With Bwr Resin ) And Including Teak Wood Beading Plain For Head Rest Alround And Half Cut Round Beading Front Side And Other Side Complete As Per Drg, Beading Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 123 Replacement Of Leg Of Head Rest With S&F New Ist Class Hw ( Teak Wood ) Leg Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 124 Replacement Of Plywood 3.5Mm Thick, One Side Teak, And Plain Beading And Half Cut Round Beading Of Foot Rest With S&F New Ply Wood Of Foot Rest Fixing In Position Complete All As Shown On Drg, Specificed And Directed. 125 Replacement Of Leg Of Foot Rest With S&F New Ist Class Hw ( Teak Wood ) Leg Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 126 Replacement Of Long Rail With S&F New Ist Class Hw ( Teak Wood ) Long Rail Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 127 Replacement Of Short Rail With S&F New Ist Class Hw ( Teak Wood ) Short Rail Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 128 Replacement Of Stiffener With S&F New Ist Class Hw ( Teak Wood ) Stiffener Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed. 129 Replacement Of Mild Steel Bracket With S&F New Mild Steel Bracket Made Out Of 40Mm X 40Mm X 6Mm Flat Iron, Made To Shape Fixed In Position Complete All As Shown On Drg Specified And Directed . 130 Polishing One Coat To Old And Two Coats To Old New Surfaces To Bed Ply With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surfacewith Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 131 Table Writing : Fd-33, Fd-249, Fd-275 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 132 Replacement Of Oldexisting Broken Table Top Of Any Description With S&F New Table Top Of 18 / 19 Mm Thick Ply Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked, 0.6 Mm Thick Laminate Sunmica Sheet Should Be Pasted On Ply Board Without Nails, Colour / Shade As Approved By Eic / Ge With 4 Mm Thick Teakwood Beading All Around. 133 Replacement Of Shutters ( Complete ) With S & F 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge. Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 134 Replacement Of Top Long Rails With S&F New Top Long Rail Made Out Of Ist Class Hard Wood ( Teak Wood ) Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 135 Replacement Of Top Short Rail With S&F New Top Short Rail Ofmade Out Of Ist Class Hard Wood ( Teak Wood ) Complete As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 136 Replacement Of Drawer With Knob Brass Chromium Plated 40Mm Dia With S&F Complete New Drawer Made Out Of Ist Class Hard Wood ( Teak Wood ) With Knob Brass Chromium Plated 40Mm Dia As Approved By Ge Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 137 Replacement Of Leg With S&F New Leg With Made Outist Class Mp ( Teak Wood ) Complete All As Shown On Drgs, And Directedby The Engineer-In-Charge. 138 Replacement Of Bottom Centre Stiffener With S&F New Bottom Centre Stiffener Made Out Of Ist Class Hardwood ( Teak Wood ) Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 139 Replacement Of Bottom Side Stiffener With S&F New Bottom Side Stiffener Made Out Of Ist Class Hardwood ( Teak Wood ) Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 140 Replacement Of Rubber Shoe With Screw ( Steel ) With S&F New Nylon Buffer Of Superior Qulaity Screws ( Steel ) Of Suitable Size Complete As Approved And All As Shown On Drgs. 141 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Writing With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surfacewith Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship. The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 142 Side Board : Fd-26 ( M ) , Fd-241, Fd-371, Fd-1112 S & F Following Components Of Side Board Including Dismantling Taking Out Carefully & Replace Old Components Of Side Board. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 143 Removing Of Old U / S Top From Side Board And S & F New Top Made Out Of 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 4Mm Thick Teak Wood Beading All-Around The Top Of Side Board All As Shown On Drg And As Directed. 144 Replacement Of Bottom & S & F New Bottom 145 Replacement Of Side & S & F New Side 146 Replacement Of Shelf With S & F 12Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge 147 Replacement Of Partition. 148 Replacement Of Back Ply With S & F New 6Mm Thick Plywood Commercial Both Side Grade I ( With Bwr Resin ) . 149 Replacement Of Bottom Long Stiffner With S & F New M.P.Teak Wood Stiffner 150 Replacement Of Bottom Short Stiffner With S & F New M.P. Teak Wood Stiffner 151 Replacement Of Legs With S & F New M.P Teak Woodlegs 152 Replacement Of Knobs With S & F New 25 Mm Dia Brasic C.P. Complete. 153 Replacement Of Locks With S & F New Locks Brass 154 Replacement Of Complete Drawers With S & F New Complete Drawers ( As Per Shown On Drg ) Made Of 1St Class Teak Wood 155 Replacement Of Piano Type Hinges With S & F Newpiano Typehinges Light Weight 156 Polishing One Coat To Old And Two Coats To Old New Surfaces To Side Board With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 157 Book Case : Fd-45 ( M ) , Fd-237, Fd-355 S & F Following Components Of Book Case Including Dismantling Taking Out Carefully & Replace Old Components Of Book Case. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 158 Removing Of Existing U / S Shutter And S & F Of New Shutters Of 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 3 Mm Thick Teak Wood Beading On Three Side Of Shutters All As Specified And Directed By Engineer-In-Charge. 159 Removing Of Existing U / S Back And S & F Of New Back Of 6 Mm Thick Plywood Bwr Grade Commercial Type All As Specified And Directed By Engineer-In-Charge. 160 Removing Of Existing U / S Leg And S & F Of New Leg Of Teak Wood Duly Planned And Finish Complete All As Specified And Directed By Engineer-In-Charge. 161 Removing Of Existing U / S Long Rail And S & F Of New Long Rail Of Teak Wood Duly Planned And Finish Complete All As Specified And Directed By Engineer-In-Charge. 162 Removing Of Existing U / S Side & Partition And S & F Side & Partition 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 3 Mm Thick Teakwood Beading On Front Edge Of The Shelf With Nails. All As Specified And Directed By Engineer-In-Charge. 163 Removing Of Existing U / S Shelve And S & F Of New Shelve Of 18 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 3 Mm Thick Teak Wood Beading On Front Edge Of The Shelf With Nails. All As Specified And Directed By Engineer-In-Charge. 164 Removing Of Existing U / S Ms Hinges And S & F Of Piano Type Isi Marked Hinges All As Specified And Directed Engineer-In-Charge. 165 Removing Of Existing U / S Top & Bottom And S & F Top & Bottom Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge All As Specified And Directed Engineer-In-Charge. 166 Removing Of Existing U / S Knob And S & F New Cp Barss Knob Fixed With Steel Screw All As Specified And Directed By Engineer-In-Charge. 167 Polishing One Coat To Old And Two Coats To Old New Surfaces To Book Case With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 168 Hat Stand With Mirror : Fd-23 ( M ) , Fd-233, Fd-361 S & F Following Components Of Hat Stand Including Dismantling Taking Out Carefully & Replace Old Components Of Hat Stand. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 169 M & L For Replacement Of Base Made Of 18 / 19 Mm Thick Mdf Board Exterior Grade ( Grade I, Type-Ii ) Isi Marked Duly Post -Formed With 0.6 Mm Thick Laminate In Colour / Shade As Approved By Eic / Ge With 6 Mm Thick Teak Wood Beading Around Side In Requied Shape And Size All As Specified And Shown On Drg And As Directed By Engineer-In-Charge. 170 Brass Pegs With Screws Size And Shape As Per Drg. 171 Teak Wood Beading Shape & Size As Per Drg. 172 Mirror 5.5 Mm Thick Size As Per Drg. 173 Polishing One Coat To Old And Two Coats To Old New Surfaces To Hat Stand With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 174 Rack Side 4 Spaces ( 3 / 4 Sh ) - Db-4123 S & F Following Components Of Rack Including Dismantling Taking Out Carefully & Replace Old Components Of Rack. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 175 Polishing One Coat To Old And Two Coats To Old New Surfaces To Hat Stand With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 176 Table Bed Side W / Drawer And W / O Drawer : Db-3956, Db-4043 S & F Following Components Of Table Including Dismantling Taking Out Carefully & Replace Old Components Of Table. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 177 Replacement Of Drawer With Knob With S&F Complete New Drawer Made Out Of Ist Class Hard Wood ( Teak Wood ) With Knob As Approved By Ge Complete All As Shown On Drgs, Specified And Directed By The Engineer-In-Charge. 178 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Bed Side With Drawer With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 179 Polishing One Coat To Old And Two Coats To Old New Surfaces To Table Bed Side Without Drawer With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 180 Almirah Large With Shelf- Db-4155 S & F Following Components Of Almirah Including Dismantling Taking Out Carefully & Replace Old Components Of Almirah. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 181 Replacement Of Shelf & S & F New Shelf. 182 Replacement Of Hasp & Staple & S & F New Hasp & Staple. 183 Polishing One Coat To Old And Two Coats To Old New Surfaces To Almirah With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment. 184 Mirror Dressing Gents ( Map ) : Fd / E6 / Map / 16 S & F Following Components Of Mirror Dressing Gents Including Dismantling Taking Out Carefully & Replace Old Components Of Mirror Dressing Gents. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. 185 Replacement Of Back Frame With S&F New Back Frame Made Out Of 50Mm X 28Mm Teakwood Members & 12Mm Thick Bwr Ply, Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 186 Replacement Of Mirror With S&F New Mirror Of Size 600Mm X 1200Mm X 5.5Mm Thick Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 187 5.5Mm Thick Glass Shelves Of Size 600Mm X100mm Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 188 Polishing One Coat To Old And Two Coats To Old New Surfaces To Mirror Dressing Gents With French Polish Of Approved Grade And Brand After Cleaning, Dusting And Scratching The Entire Wooden Surface With Sand Emery Paper, Filling Putty To The Bore Holes Making Surface Smooth By Sanding And Grinding With Standard Workmanship.The Polishing Shall Be Carried Out After Making The Article Intact By Tightening All Parts And Carrying Out Antitermite And Antibug Treatment.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	26-Dec-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	02-01-2024
2	02-Jan-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	08-01-2024

INR 500 /-

INR 80000.0 /-

INR 40 Lakhs /-

Name of Work: REPAIR/MAINT OF CERTAIN WOODEN FURNITURE ARTICLES AT GE GWALIOR

Sl. No.	Item Description
1	TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
2	Removing of old U/S top from table bedside and S & F new top made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 04mm thick teak wood beadingall-around the top of side board all as shown on drg and as directed.
3	Replacement of side of table bed side with S&F new sides with 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teakwood beading.
4	Replacement of shelf & bottom with S&F 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick beading.
5	Replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood.
6	Polishing one coat to old and two coats to old new surfaces to table bed side with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
7	PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
8	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
9	Replacement of leg with S&F new teak wood leg made to shape.
10	Replacement of long rail with S&F new teak wood long rails made to shape.
11	Replacement of short rails with S&F new teak wood short rails made to shape.
12	S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed.
13	Polishing one coat to old and two coats to old new surfaces to peg table with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
14	TABLE CENTER : FD-29(M), FD-235, FD-274 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
15	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
16	Replacement of leg with S&F new teak wood leg made to shape.
17	Replacement of long rail with S&F new teak wood long rails made to shape.
18	Replacement of short rails with S&F new teak wood short rails made to shape.
19	Replacement of stiffener with S&F new teak wood stiffener made to shape.
20	S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing.
21	Polishing one coat to old and two coats to old new surfaces to table center with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
22	TEAPOY : FD-34(M), FD-232, FD-278, FD-382 S & F following components of table including dismantling taking out carefully & replace old components of teapoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
23	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
24	Replacement of leg with S&F new teak wood leg made to shape.
25	Replacement of long rail with S&F new teak wood long rails made to shape.
26	Replacement of short rails with S&F new teak wood short rails made to shape.
27	Replacement of stiffener with S&F new teak wood stiffener made to shape.
28	S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing
29	Polishing one coat to old and two coats to old new surfaces to teapoy with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
30	TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379 S & F following components of table including dismantling taking out carefully & replace old components of table dressing table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
31	Replacement of old existing broken top of table dressing gents of any description with S&F new top of 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with and including 3mm thick teak wood beading alround made to shape, fixed in position.
32	Replacement of side with S&F new side of 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 3mm thick teak wood beading alround, made to shape, fixed in position.
33	Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I (BWR Resin) made to shape fixed in position.
34	Replacement of drawer with S&F new drawer made to shape fixed in position.
35	Replacement of back frame with S&F new back frame with 6mm thick commercial ply grade I BWR grade made to shape fixed in position.
36	Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.
37	Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge
38	Polishing one coat to old and two coats to old new surfaces to table dressing gents with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
39	TABLE DRESSING LADIES WITH MIRROR : FD-32, FD-251 S & F following components of table dressing including dismantling taking out carefully & replace old components of table dressing. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
40	Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.
41	Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood).
42	M & L for replacement of U/S 6mm thick back ply wood of mirror.
43	M & L for replacement of U/S stiffener between legs.
44	Replacement of broken top of table dressing ladies of any description with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position
45	Replacement of side oftable dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side.
46	Replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side).
47	Replacement of drawer of table dressing ladies with S&F new drawer as per Drg
48	Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood).
49	Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood).
50	Replacement of back oftable dressing ladies with S&F new back of table dressing ladies with teak wood veneered one side & commercial on other side.
51	Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5.5mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.
52	Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror of size 1220 x 366 x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge
53	Polishing one coat to old and two coats to old new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
54	TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
55	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
56	All as per Srl item No. 7.01 here-in-before but top of table dining 4 persons.
57	L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.
58	Replacement of leg with S&F new teak wood leg made to shape
59	Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape
60	Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape
61	Replacement of short rails with new teak wood short rails made to shape
62	S & F new Nylon Buffer of superior quality with suitable screws for fixing.
63	Polishing one coat to old and two coats to old new surfaces to table dining 6 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
64	All as per Srl item No. 7.09 here-in-before but table dining 4 persons.
65	TABLE DINING 6/8 PERSONS : FD-30, FD-239, FD-273, FD-376, FD-1115 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
66	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
67	All as per item 8.01 here in but top of table dining 6 persons
68	Replacement of leg with S&F new teak wood leg made to shape
69	Replacement of long rail with S&F new teak wood long rails made to shape of table 8 person
70	Replacement of short rails with new teak wood short rails made to shape
71	Replacement of stiffener with S&F new teak wood stiffener under the top joining the top long side of top rails of table dining.
72	Replacement of long rail with S&F new teak wood long rails made to shape of table 6 person
73	L-Shape wooden corner of suitable size to the Table between legs and rail to be fixed with screw.
74	S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.
75	Polishing one coat to old and two coats to old new surfaces to table dining 8 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
76	All as per itemNo 8.10 here in but top of table dining 6 persons
77	TABLE 900 MM X 600 MM OR (3" x 2") (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
78	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
79	Replacement of legs of table S&F new leg made out of Ist class HW (teak wood)
80	Replacement of table frame"s rail with S&F new table frame"s long rail made out of Ist class HW (teak wood).
81	S & F new Stiffener.
82	Replacement of table frame"s rail with S&F new table frame"s short rail made out of Ist class HW (teak wood).
83	Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.
84	Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.
85	Polishing one coat to old and two coats to old new surfaces to table 3"x2" with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
86	TABLE 900 MM X 600 MM WITH DRAWER (3" x 2") (WOODEN) : FD-41, FD-224, FD-283 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
87	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
88	Replacement of legs of table S&F new leg made out of Ist class hard wood (teak wood)
89	Replacement of table frame"s rail with S&F newtable frame"s long rail made out of Ist class hard wood (teak wood).
90	Replacement of U/S drawer with new drawer of same size and shape to Table. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including aluminium anodized knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg
91	S & F new Stiffener.
92	Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.
93	Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.
94	Polishing one coat to old and two coats to old new surfaces to table 3"x2" with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
95	CHAIR DINING (JCO/ORS) : FD/MAP-II/05 S & F following components of chair including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
96	Replacement of old U/S front leg from existing Chair dining and S & F same size new front leg made out of Ist class hard wood teak to chair dining.
97	All as per srl item No. 11.01 here-in-before but rear leg of chair dining.
98	All as per srl item No. 11.01 here-in-before but front/ back/ side rail of chair dining.
99	All as per srl item No. 11.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining.
100	All as per srl item No. 11.01 here-in-before but stiffener between front leg to rear leg of chair dining.
101	All as per srl item No. 11.01 here-in-before but stiffener for jointing to side stiffener of chair dining.
102	Removing of old U/S/broken PVC seat from chair dining and S & F new PVC seat 4mm thick in single piece all as per shape and size shown on drg and as directed.
103	S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.
104	Polishing one coat to old and two coats to old new surfaces to chair dining with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
105	DRESSING TABLE (LADIES) INCLUDING STOOL FD/MAP-II/07 S & F following components of table dressing including dismantling taking out carefully & replace old components of table dressing. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
106	Replacement of handle with S&F new chromium plated handle as approved by the Engineer-in-Charge of best quality.
107	M & L for replacement of U/S sliding channel.
108	M & L for replacement of U/S 6mm thick back ply wood of mirror.
109	Replacement of back oftable dressing ladies with S&F new back of table dressing ladies with teak wood veneered one side & commercial on other side.
110	Replacement of broken top of table dressing ladies of any description with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position
111	Replacement of side oftable dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side.
112	Replacement of door shutter of table dressing ladies with S&F new door shutter as per Drg
113	Replacement of drawer of table dressing ladies with S&F new drawer as per Drg
114	Replacement of wheels of table dressing ladies with S&F new wheels as per Drg
115	Replacement of hinges of table dressing ladies with S&F new hinges as per Drg
116	Replacement of magnetic catcher of table dressing ladies with S&F new magnetic catcher as per Drg
117	Replacement of cushion of Stool dressing with S & F PU foam cushion with 40 Density with Tapestry cloth as approved by EIC/GE of rate not less than Rs 300/RM.
118	Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror 5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge
119	Polishing one coat to old and two coats to old new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
120	BED PLY WOOD TOP (HARD BED) : FD-246 S & F following components of bed including dismantling taking out carefully & replace old components of bed. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
121	Dismantling, taking out carefully old existing ply wood of any description and replacement of the same with S&F new ply wood, 12mm thick, commercial on both side, BWR grade of size (as shown on drg) fixed with steel screws made to shape fixed in position complete all as shown on drg, specified and directed.
122	Replacement of ply wood on both side of head rest frame with S&F new 3.5mm thick ply wood one side teak veneered & other side commercial grade - I (with BWR Resin) and including teak wood beading plain for head rest alround and Half cut round beading front side and other side complete as per drg, beading made to shape fixed in position complete all as shown on drg specified and directed.
123	Replacement of leg of head rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.
124	Replacement of plywood 3.5mm thick, one side teak, and plain beading and half cut round beading of foot rest with S&F new ply wood of foot rest fixing in position complete all as shown on drg, specificed and directed.
125	Replacement of leg of foot rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.
126	Replacement of long rail with S&F new Ist class HW (teak wood) long rail made to shape fixed in position complete all as shown on drg specified and directed.
127	Replacement of short rail with S&F new Ist class HW (teak wood) short rail made to shape fixed in position complete all as shown on drg specified and directed.
128	Replacement of stiffener with S&F new Ist class HW (teak wood) stiffener made to shape fixed in position complete all as shown on drg specified and directed.
129	Replacement of mild steel bracket with S&F new mild steel bracket made out of 40mm x 40mm x 6mm flat iron, made to shape fixed in position complete all as shown on drg specified and directed .
130	Polishing one coat to old and two coats to old new surfaces to Bed ply with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surfacewith sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
131	TABLE WRITING : FD-33, FD-249, FD-275 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
132	Replacement of oldexisting broken table top of any description with S&F new table top of 18/19 mm thick ply board exterior grade (Grade I, Type-II) ISI marked, 0.6 mm thick laminate sunmica sheet should be pasted on ply board without nails, colour/shade as approved by EIC/GE with 4 mm thick teakwood beading all around.
133	Replacement of shutters (complete) with S & F 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE. complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
134	Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
135	Replacement of TOP short rail with S&F new TOP short rail ofmade out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the Engineer-in-Charge.
136	Replacement of drawer with knob brass Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob brass Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
137	Replacement of Leg with S&F new Leg with made outIst class MP (teak wood) complete all as shown on drgs, and directedby the Engineer-in-Charge.
138	Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class HardWood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
139	Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class HardWood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
140	Replacement of rubber shoe with screw(steel) with S&F new Nylon Buffer of superior qulaity screws (steel) of suitable size complete as approved and all as shown on drgs.
141	Polishing one coat to old and two coats to old new surfaces to Table writing with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surfacewith sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
142	SIDE BOARD : FD-26(M), FD-241, FD-371, FD-1112 S & F following components of side board including dismantling taking out carefully & replace old components of side board. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
143	Removing of old U/S top from Side board and S & F new top made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4mm thick teak wood beading all-around the top of side board all as shown on drg and as directed.
144	Replacement of bottom & S & F new bottom
145	Replacement of side & S & F new side
146	Replacement of shelf with S & F 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE
147	Replacement of partition.
148	Replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWR Resin).
149	Replacement of Bottom long Stiffner with S & F new M.P.Teak Wood Stiffner
150	Replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner
151	Replacement of Legs with S & F new M.P Teak WoodLegs
152	Replacement of knobs with S & F new 25 mm dia brasic c.p. complete.
153	Replacement of locks with S & F new locks brass
154	Replacement of complete drawers with S & F new complete drawers (as per shown on drg) made of 1st class teak wood
155	Replacement of Piano type hinges with S & F newPiano typehinges light weight
156	Polishing one coat to old and two coats to old new surfaces to side board with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
157	BOOK CASE : FD-45(M), FD-237, FD-355 S & F following components of book case including dismantling taking out carefully & replace old components of book case. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
158	Removing of existing U/S shutter and S & F of new shutters of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading on three side of shutters all as specified and directed by Engineer-in-Charge.
159	Removing of existing U/S back and S & F of new back of 6 mm thick plywood BWR grade commercial type all as specified and directed by Engineer-in-Charge.
160	Removing of existing U/S leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.
161	Removing of existing U/S long rail and S & F of new long rail of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.
162	Removing of existing U/S side & partition and S & F side & partition 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teakwood beading on front edge of the shelf with nails. all as specified and directed by Engineer-in-Charge.
163	Removing of existing U/S shelve and S & F of new shelve of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading on front edge of the shelf with nails. all as specified and directed by Engineer-in-Charge.
164	Removing of existing U/S MS hinges and S & F of Piano type ISI marked hinges all as specified and directed Engineer-in-Charge.
165	Removing of existing U/S top & bottom and S & F top & bottom thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE all as specified and directed Engineer-in-Charge.
166	Removing of existing U/S knob and S & F new CP Barss knob fixed with steel screw all as specified and directed by Engineer-in-Charge.
167	Polishing one coat to old and two coats to old new surfaces to book case with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
168	HAT STAND WITH MIRROR : FD-23(M), FD-233, FD-361 S & F following components of hat stand including dismantling taking out carefully & replace old components of hat stand. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
169	M & L for replacement of Base made of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 6 mm thick teak wood beading around side in requied shape and size all as specified and shown on drg and as directed by Engineer-in-Charge.
170	Brass pegs with screws size and shape as per drg.
171	Teak wood beading shape & size as per drg.
172	Mirror 5.5 mm thick size as per drg.
173	Polishing one coat to old and two coats to old new surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
174	Rack Side 4 Spaces (3/4 sh)- DB-4123 S & F following components of rack including dismantling taking out carefully & replace old components of rack. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
175	Polishing one coat to old and two coats to old new surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
176	Table Bed Side W/Drawer and w/o drawer : DB-3956, DB-4043 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
177	Replacement of drawer with knob with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob as approved by GE complete all as shown on drgs, specified and directed by the Engineer-in-Charge.
178	Polishing one coat to old and two coats to old new surfaces to table bed side with drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
179	Polishing one coat to old and two coats to old new surfaces to table bed side without drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
180	Almirah Large with Shelf- DB-4155 S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
181	Replacement of shelf & S & F new shelf.
182	Replacement of hasp & staple & S & F new hasp & staple.
183	Polishing one coat to old and two coats to old new surfaces to almirah with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.
184	MIRROR DRESSING GENTS (MAP) : FD/E6/MAP/16 S & F following components of mirror dressing gents including dismantling taking out carefully & replace old components of mirror dressing gents. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.
185	Replacement of back frame with S&F new back frame made out of 50mm x 28mm teakwood members & 12mm thick BWR Ply, made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
186	Replacement of mirror with S&F new mirror of size 600mm x 1200mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
187	5.5mm thick glass shelves of size 600mm x100mm made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
188	Polishing one coat to old and two coats to old new surfaces to mirror dressing gents with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.