Tender For Additional/Alternator To Mini Armory At 9Brd, Provision Of Chemical Earthing At 9Brd, Spl Repair To Ceiling Fans, Exhaust Fans, Geysers, Provision Of Air Shower At 9Brd And Certain Minor Works At Afs Pune Under Ge Af Lohegaon.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
08 Jan 2024
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional / Alternator To Mini Armory At 9Brd, Provision Of Chemical Earthing At 9Brd, Spl Repair To Ceiling Fans, Exhaust Fans, Geysers, Provision Of Air Shower At 9Brd And Certain Minor Works At Afs Pune Under Ge Af Lohegaon.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Dec-2023 | REVISED TENDER PAGE | Other | 01-Jan-2024 |
| 2 | 23-Dec-2023 | REVISED CRITICAL DATE | Date | 01-Jan-2024 |
| 3 | 23-Dec-2023 | REVISED BOQ | BOQ | 01-Jan-2024 |
| 4 | 01-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for wiring comolete with 1.5 sq mm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade conforming to IS 694 drawn through steel ERW conduit flame proof, heavy grade ISI marked including nessay conduit accessories surface on wall, ceiling etc including 1.5 sq mm PVC insulated flame retardent copper conductor as in continous earth wire for one FLP light/fan point controlled one way metal clad switch of 5 Amps capacity complete all as specified & directed. |
| 2 | S&F Switch flame proof rotary type with termination box in LM6 , 16A single pole 250 V complet all as specified & directed. |
| 3 | S&F flame proof Junction box in aluminum alloy LM6 construction 4 way with 3/4\" ET entries with connectors complete all as specified and directed. |
| 4 | S&F LED light fittig2x16 W flame proofCMRI certiied recommended for gas/vapor group of IIA & IIIB, Zone 1&2 and IP 65 protection with die cast aluminum hosing with het resistant toughened glass with LED tube light fixtures driver holders connector etc complee with al accessories prewired an including connecting up with three core flexibe copper conductor cablewith suitable size. |
| 5 | M&L for sub main wiring complete with two runs of single core 4sq mmFRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including Steel ERWconduit flame proof heavy grade ISI markedwith all fitting & fixtures all as directed and specified ( Note Two runs of 4 sqmm copper cable and one run of 4 sqmcopper cable including steel ERW conditshall be measured and paid as one length). |
| 6 | M&L for sub main wiring complete with two runs of single core 2.5sq mmFRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 2.5 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including Steel ERWconduit flame proof heavy grade ISI markedwith all fitting & fixtures all as directed and specified ( Note Two runs of 2.5 sqmm copper cable and one run of 2.5 sqmcopper cable including steel ERW conditshall be measured and paid as one length). |
| 7 | M&L for sub main wiring complete with two runs of single core 6.0sq mmFRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including Steel ERWconduit flame proof heavy grade ISI markedwith all fitting & fixtures all as directed and specified ( Note Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmcopper cable including steel ERW conditshall be measured and paid as one length). |
| 8 | S&F MCB DB SPN 4 way IP-43 IK-09 with metal door suitable for housing MCBs complete all as directed by Engineer -in-Charge. |
| 9 | S&F MCB SP 240 Volts, 10 KA C Curve MCB Sp 6 to 32 Amps, Make Legrand Complete all as specified and directed by Engr-in-Charge |
| 10 | S&F MCB SPN 6 to 32 Amp 10 KA 240 V C Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | Demolition of cement concrete (un-reinforced) in ground floors and paving\"s not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed. |
| 14 | M&L for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all specified and directed. |
| 15 | All as per Item No 14 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed. |
| 16 | Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil. |
| 17 | Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 18 | Providing Cement concrete type B2 1:2:4 (40 mm graded aggregate ) as in foundation ,filling and mass concrete. |
| 19 | Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete , complete all as directed by Engr-in-Charge. |
| 20 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed |
| 21 | M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 |
| 22 | S & F Mild steel screw bolts (machine made )with hexagonal or square heads at one end and screwed the other ,or screwed both ends ,each crewed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm long but n exc 15 cm and Diameter of neck in 11 to 15mm. |
| 23 | Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girthcomplete all as specified and directed. |
| 24 | Cutting holes exc 150 sqcm but nexc 400sqcm into or through brick walls built in cement mortar of any description and making good in cement mortar 1 :3 or cement concrete 1 : 2 :4 type B1 As required |
| 25 | M&L for prepartion of newly plastered surfacestwo coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper (over a coat of alkali resistant primer) having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications, complete all as specified and directed. |
| 26 | M & L for treating small articles such as ends of posts , hold fast etc with Tar or Coal Tar Black Paint ,area exc 0.1sqm but nexc 0.5 sqm each. |
| 27 | Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each |
| 28 | M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed . |
| 29 | S & F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedand directed. |
| 30 | S & F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hinges such as peg stays 150mm long (1.no)hinges type B-21 10mm long (2 no.) suitable handle (1 no.) etc. complete all as specified and directed. |
| 31 | S& F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 32 | S& F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 33 | S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 34 | S & F 100 mm size Butt hinges, Mediumweight, cold rolled mild steel, and fixed all as specified and directed. |
| 35 | S&F 150 mm long, Aluminium barrel tower bolts of extruded sectioncomplete all as specified and as directed. |
| 36 | S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed. |
| 37 | S&F 300 mm long mild steel sliding door bolt, plate type,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 38 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed . |
| 39 | M & L for 105mmx60mm pressed steel frame for doors with one or more rebates incl necessary fixing lugs ,hinges,lock strike plat etc complete all as specified and directed by engr -in-charge . |
| 40 | M&L for cement concrete type C1 1:3:6 (12.5 mm graded aggregates) for chowkhat filling and hold fast as reqd all as specified and directed. |
| 41 | Demolition of stone / block masonry built in CM 1:4 |
| 42 | M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6). |
| 43 | M&L rendering 15mm thick on surface of concrete surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed |
| 44 | M&L for RCC 1:2:4 (type B0) using 12.5mm graded aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 45 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 46 | M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed |
| 47 | M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete. |
| 48 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortars including backingin floors, aprons etc |
| 49 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement &pigment complete all as specified and directed. |
| 50 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement &pigment complete all as specified and directed. |
| 51 | M&L 50mm thick Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and directed. |
| 52 | M&L 75 thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) laying as in Sub base complete all as specified and directed. |
| 53 | M & L for grouting 150mm thick under stanchion bases or grillages etc including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and directed |
| 54 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:6 complete all as specified and directed. |
| 55 | M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over a 10mm thick plaster in CM 1:3 all as specified and directed. |
| 56 | M&L for Vitrified Ceramic tiles 10 mm thick Colour light shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchas in floor over 15mm thick screed bed in CM 1:4. |
| 57 | M&L for Vitrified Ceramic tiles 10 mm thick Colour light shade (square/rectangular) polished, in vertical surface/dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick backing coat in CM 1:4. |
| 58 | Taking down cement plaster on brick/stone walletcincluding raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 59 | M & L 10mm thick plasteringon surface of brick work/concrete surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed |
| 60 | M & L for preparation of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls over 3mm thick putty complete all as specified anddirected. |
| 61 | M & L for painting two coats with synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation of surfaces. |
| 62 | Drilling 20cm depth holes for bolts pipes etc exc 25mm but n exc 60mm dia |
| 63 | Cutting of holes 20cm depth n exc 150 sq cm in brick walls built in lime mortar and stone walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. |
| 64 | M & L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM 1:6. |
| 65 | M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (wihtout using extra cement ) etc. |
| 66 | M & L for RCC type B0 1:2:4 (suing 12.5mm graded aggregates) as slabs supported on walls beams and columns in floors roofs landings balconies canopies deck slabs and in shelves and the like complete all as specified and directed. |
| 67 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) |
| 68 | M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs |
| 69 | M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs |
| 70 | M&L in repairfor 15 mm bore bib tapchromium plated cast copper alloy with wall flange complete all as specified and directed |
| 71 | M & L Cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors |
| 72 | M & Lfor Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all specified and directed. |
| 73 | S &F75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 74 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches orin floor all as specified and directed. |
| 75 | S &F PVC (SWR) bends with oval acess door 75mm dia |
| 76 | Supply and fix Almirah steel with shelves all as specified in furniture drawing FD-1031 and as directed by Engineer-in-Charge. |
| 77 | Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cm deep and getting out in soft/ loose soil |
| 78 | M&L PCC 1:3:6 type C-2 (using 40 mm graded stone agg) 75 mm thick sub base |
| 79 | M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in coping all as specified and directed. |
| 80 | Supply, installation,Boring, erection, testing and commissioningof Copper bonded MS solid rod electrode of dia 17.2 mm and 6 mtr long with high purity electrically conductive granular material having ultra low resistive value of 0.001 Ohm-m. Electrode made of conductive earth concrete mixed with cement in the ratio2:1 (2 part of high purity electriclly conductive granular and 1 part cement)surrounding the electrode shall be embedded in Bonded MS conductor having copper coatings of 150 micronplaced in augured bore hole of 100mm dia x 6 Mtr depth, resulting to increase in the effective surface area of the earth electrode or grids to lower the resistance.The conductive material shall confirm to BIS: 3043-2018. The rod shall be embedded in conductive concrete at factory with concrete having resistivity 0.040 Ohm-m. All the material such as cu bonded MS rod and concrete mix shall be Ph nuetral, chemicaly inert and non corrosive complete all as specified and directed by Engr-In-Charge.i) The contractor shall submit type test report issued by the CPRI for high purity, electrically conductive earthings , confirms to rated short time withstand current20 KA per sec.ii) The factory made electrode shall be tested at factory and test report shall be submitted.iii) Factory testing of individual earthing shall be carried out in presence of rep of accepting officer and report shall be submitted.iv) The contractor shall obtain make approval for high purity electrically conductive granualer duly by submitting certificates conforming to resistivity is 0.001 ohms by granualer manufacturer.v) On installation of earthings at site, 04 Nos earthings shall be connected in grid to achieve less then 1 ohm resistance of grid, If desired resistance is not achived the contractor shall redo the same without any extra cost. The top edge of the electrode shall comprise of plate provided with 04 holes for connections of earthing strip including brass nut bolts for connections of the strip. the copper strip shall be duly brazed/welded with connection terminal of earthing rod. |
| 81 | S&F copper earth continuity conductor or main earthing lead of size 25x3 mm fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or any other indicated suitation for earting etc as required complete including porcelain insulators if required all as specified and as directed. |
| 82 | S & Installation Steel Braided wire (Earthing Braids) fixed to wall/flooror drawn in condit/pipe or any other indicated suitation for earthing etc s required complete all as specified and directed by Engr-in-Charge. |
| 83 | Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw |
| 84 | Supply and laying HDPE pipe 32 mm dia PE 100 Grade on wall/ along ground/ along channel/ in trench/under roof/ along pillar or as directed complete. |
| 85 | Supply and fixing in replacement ceiling fans complete with blades, down rods, and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM, 350RPM, BEE Five star rated with brushless direct current motor (BLDC) motor suitable for regulator controlled operation incl provision of suitable hook/clamp for hanging of ceiling fan necessery cable for connection and taking down old unserviceable ceiling fan and depositing to MES Store complete all as specified and directed. |
| 86 | S & F in replacement stepped type electronic fan regulator flush type 2 Module on the existing phenolic laminated sheet etc. as reqd. |
| 87 | Supply and fix PVC Exhaust fan,AC single Phase. 230V of size 250 mm sweep 900 RPM with blades, frame, louvers made out of aluminium shhet of 0.5 mm thick with frame, anchor fastners for mounting fan, 1.5 Sqmm 3 Core cable from Ceiling rose to Exhaust fan and taking down old unserviceable Exhaust fan and depositing to MES Store complete all as specified and directed. |
| 88 | Supply & fix Exhaust fans Heavy duty AC single phase 230/ 240 V of size 380/400 mm sweep 3 blade with 900 RPM including louver shutter made out of aluminum sheet of 0.5 mm thickness, anchor fastners for mounting fan, three core 1.5 Sqmm wire from ceiling rose to exhaust fan and taking down old unserviceable Exhaust fan and depositing to MES Store complete all as specified and directed. |
| 89 | Supply & fix Exhaust fans Heavy duty AC single phase 230/ 240 V of size 450 mm sweep 3 blade with 900 RPM including louver shutter made out of aluminum sheet of 0.5 mm thickness, anchor fastners for mounting fan, three core 1.5 Sqmm wire from ceiling rose to exhaust fan and taking down old unserviceable Exhaust fan and depositing to MES Store complete all as specified and directed. |
| 90 | Supply and fix electric water heater, storage type steel body withinner tank and heating element2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, 4 Nos fasteners etc incl suitable hot and cold water pipe |
| 91 | Supply and fixing sheet metal enclouser single pole and neutral with2 pin and earth plug and socket 20 A 240V complete with one Double pole MCB of capacity 20 A complete all as specified and directed. |
| 92 | S&F Stop valves,15mm dia cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions |
| 93 | Demolition ofcement concreteof any description and in any position not otherwise specifically provided for and removing demolised meteialsand depositing where directed. |
| 94 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Spfd |
| 95 | M&L form work to fair finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter |
| 96 | All as per srl item above but 6 to 8mm dia as in spacer bars or stirups |
| 97 | M&L RCC type M-25 (20 mm grade aggregate ) in foundations, inclucing rafts, footings, foundations beams : plinth beams: bases for column, etc,basement slabs , under reamed piles ad mass concrete. |
| 98 | M&L for 10mm thick rendering onfair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 99 | M&L Framed work such as grills,Barred iron doors,Ladders, walk ways,frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 100 | Mild steel screw bolts of ength of bolt exc 5cm but n exc 10cm long, diameter of neck 11 to 15mm(machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 101 | M&L for Forming mortice holes exc 50 but n exc 100 Cu cm for , fixing bolts ,balusters,newels,rag-bolts,etc and grouting with cement mortar 1:2. |
| 102 | S&F 0.80mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings(length and girth as fixed)with L or J hooks orcoach screws with grade of zinc coating275 complete all as specified and as directed. |
| 103 | M&L for MCB SP 6-32 Amps B curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. |
| 104 | M&L for MCB SPN 40-63 Amps B curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply and fixingsheet metal enclosure with DB\"s ( grouted in walls or surface mounted) double door type for MCB\"s 12 ways240 volts rated complete all as specified. |
| 106 | S&F hot and cold stainless steel connection flexible pipe chrom plated, suitable for geyser ISI marked 15mm size with PTMT nuts of length 450mm complete all as specified and directed by EngrIn Charge. |
| 107 | Supply, Install, Commisionning and testing of air shower for 2 persons with internal size of 800x1100x2100 mm made out of CRCA sheet, pretreated stoved enamelled having face velocity 6000 feet/min + 20 feet, operation time (adjustable) 0 to 9.990 seconds, 3 filter, wahsable, prefitters glass plated non-woven fabric filter having 99.99% efficiency down to size 0.3 microns particles airflow control solid state control unit, blower assembly centrifugal lubricated bearing type ISI marked assembly, illumanations using flourescent light elumination greater than 800 lux on work table noise level less than 60 DB,addon sequential teature operation by doormate magnetic switch suitable for operation at 220 too 230 volts 50 Hz single ph, frequency 50/60 Hz all as specified and directed by Engr-in-Charge. |
| 108 | Supply and fix Modular socket 6A/16A-2/3 pin combined socket 2 module complete all as specified and directed. |
| 109 | Earthing complete with copper earth plate electrode60×60cm ×3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to copper earth strip of size 20x3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 110 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required copper strip of size 20x3mm |
| 111 | M&L for taking down existing roof treatment of any description in suspended slabs in roof chajjas etc including cement mortar |
| 112 | Providing Cement concrete type B1 1:2:4 (20 mm graded stone aggregate ) as in cills, steps, seismic and other seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, kerbs not provided, water troughs including weathering, slightly rounded or chamfered angles and throating as directed. |
| 113 | S & F Mild steel screw bolts (machine made )withouthexagonal or square heads at one end and screwed the other ,or screwed both ends ,each crewed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 30 cm long and Diameter of neck exc 20mm but not exc 25mm. |
AI Tender Summary
Tender Timeline
Jan 01, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 01, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 01, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 01, 2024
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 08, 2024
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender