Food Corporation Of India-FCI has published Tender For Annual Repairs And Maintenance Of Electrical Installations At Fsd, Krishna Canal For The Year 2023-24.Sub Head: Providing Electrical Installations To The G.No1 And Restoration Of Three Phase Power Supply To Pump Room And Office Building By Repl. Submission Date for this Tender is 21-12-2023. Electrical Maintenance Tenders in krishna Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying of PVC/XLPE armoured cable with aluminium conductor 1.1 KV Gradeconfirming to IS 7098 (part I)1988 with upto date amendments of the following size at the site of work. |
| 2 | 4 X 16 Sqmm |
| 3 | 3 X 6 Sqmm |
| 4 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 5 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 6 | 100mm dia |
| 7 | Laying of One number PVC insulated and PVC Sheated/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning protective covering and refilling the trench etc as required. |
| 8 | upto 35 sq.mm |
| 9 | Laying of one number PVC insulated and PVC sheathed/XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning protective covering |
| 10 | Upto 35 Sq.mm |
| 11 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 12 | Upto 35 sq. mm |
| 13 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 14 | Upto 35 Sq. mm (Clamped with 1mm thick saddle) |
| 15 | Above 35 Sq mm and upto 95 Sqmm |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 17 | 3 X 6 (19mm) |
| 18 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 19 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 20 | 12 way , Double door |
| 21 | Supplying and fixing following way, horizontal type three poleand neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 22 | 4 way (4 + 12), Double door |
| 23 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Single pole and neutral |
| 25 | Triple pole and neutral |
| 26 | Supplying, installation, Testing and commissioning of 40 watt LED type Well Glass Light in pressure die-cast aluminium housing and fixing on truss /wall/pole with suitable clamps and nut bolts. And also dismantling the existing fitting at the site as requiered. (ISI certified) .. (RatingIP66,Luminare efficacy>110Lm/W,CRI>75, ). |
| 27 | Supplying, installation, Testing and commissioning of70W LED Street light fitting made up of pressure die cast alluminium housing and fixing on wall/truss/pole with suitable clamps and nut bolts including giving connection etc., at site of work as required.(ISI certified) |
| 28 | Supply,installation, Testing and commissioning of 20W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver with efficacy min of 100 lumens/W at the site of work.(ISI certified) |
| 29 | Supplying and fixing of Hot press moulded SMC junction Box of size 140x140x95 with 6A SP MCB, 2/4 way strip connector including testing commissioning etc. as reqd. |
| 30 | Design, Fabrication, Supplying, Installation, Testing and commissioning of Dust and vermin proof Cubicle type Feeder pillar box suitable for 3 Phase,415v,50 Hz 4 Wire AC Supply System fabricated in compartmentalized System made out of 14 SWG CRCA Sheet Steel and painted with powder coating in approved shade and comprising of the following:Complete with aluminium busbars ofadequate capacity for Phases & neutral(min. of 400 A), Suitable M.S Angle Base Frame, interconnections control wiring, including incoming and outgoing cables connections etc as required at site of work and as directed by the Engineer in charge. Size:1200mm(W)X2000mm(H)X400mm (D)Incoming4 pole MCCB, 250A, 36KA- 1 Nooutgoing4 pole MCCB, 200A, 36KA- 1 No32A, 4 Pole MCB,10KA - 4 Nos32A, 2 Pole MCB,10KA - 2 NosMetering Panneling Digital Voltmeter - 01 Nos Digital Ammeter - 01 Nos RYB phase indication lamps-1 set 6A SP MCB for control Ckts-04 Nos200/5A Current Transformers- 03 Nos |
| 31 | Supplying, Installation, Testing and Commissioningof36W,0.16 A,240 V Xitanium Driver in the existing 40 W LED Well glass light fitting including cleaning the complete set and giving connection etc. at site of work as required. |
| 32 | Supplying, installation, testing andcommissioningof 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC) motor, class of insulation: B, 3 no.s blades, 30 cm long down rod, 2 no.s canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, Service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit forspeed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v, 50Hz, single phase AC supply, earthing etc. complete as required. |
| 33 | Supplying and fixing of 300mm x 300mm size metalic frame cover fabricated with 35 mm x 35 mm x 5 mm thick angle iron welded construction frame structured and 3 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including painting, making recess in wall, masonary, plastering & finishing the good (As per drawing) |
| 34 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I pipe (medium class ) bracket for mounting of flurescent/ HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40mm X 3mm flat iron clamps with nuts, bolts and washer, Painter the flat iron with primer and finish paint etc. as required. |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 36 | one or more coats of paint on old work |
| 37 | Removing Cleaning and Refixing of existing LED well glass on Surface/truss with suitable clamps ,nut and bolts etc. including giving connections etc. at site of work as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
