E-Quotation For Arriving Rates Of Different Non-Scheduled Items See Nit-1 Manufacturing, Supplying, And Installing Fiber Composite Structural Sheet On Decorative Watch Tower On Steel Surface. Frp By Glass Fiber Reinforced Polyester Or Vinyl Ester Resin Matrix, Approximately 50% Glass By Weight. A Synthetic Surface Veil Shall Be The Outermost Layer Covering The Exterior Surfaces. Glass Strand Roving’S Shall Be Used Internally For Longitudinal Strength Specially For Coastal Area. The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 And Panels Are About 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: ≤ 0.2%, Synthetic Surface Veil Fabric Must Encase The Glass Reinforcement And Weigh About 12 Ounces Per Square Foot Depending On The Site Condition. All The Steel Column Surface And Other Exposed Surface Should Be Cover By Decorative “Frp” Laminates. The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentals Cost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic. Specification & Details Color : As Desired Material : Frp Size= ( Approx. ) 3M -4 Sides Type=Square In Shape Height = 13.00 M • Waterproof : Yes Place Of Work: Harishpal Chowpathy, Cooch Behar, West Bengal, Pin-736101 2 Supply And Installation Of 1200 Mm Dia Four Faced Gps Based Roman Tower Clock System Without Dial List Of Materials • Controller Gps Based ( Build In Battery Charger ) -1Nos • Gps Receiver-1 Nos • Slave Movement ( Hybrid Double Stepper Motor With Sensor ) -4 Nos • Communication Cable ( 4 Feet Length Each ) Hands ( Hour And Minute ) Place Of Work: Harishpal Chowpathy, Cooch Behar, West Bengal, Pin-736101 3 Manufacturing, Supplying, Fitting And Fixing At Site , Fiber Seat And Backrest With Cast Iron Composite 4 Nos. Decorative Leg, . Dimension Of Chair 2020 Mm ( Length ) X 640 Mm ( Width ) X 815 Mm ( Height ) With Back Rest Supported By Ci Decorative Stand And In Case Of Fiber Which Are Proper Reinforced By Ms Bar Covered By Glass Fiber Reinforced Polyester And Installation The Same On Proper Paved Portion Of Garden . Place Of Work: Sagar Dighi & Bairagi Dighi, Cooch Behar, West Bengal, Pin-736101 Total Nos.: 88 Nos. ( Sagar Dighi Site-42 Nos & Bairagi Dighi Site-46 Nos ) 4 Manufacturing, Supplying, Fitting And Fixing At Site , Frp Made Different Shaped Model ( Pu Colour Coat ) At Site With Fire Resistive Resin Coating With Suitable Thickness And Also Suitably Placed On Frp Rockery With Pedestal. Rate Should Be Included All Structural Framing Work By Iron Angle Plate Nut And Screw, Welding Work Etc. The Frp Having Density May Be Between 1.2G / Cm3 And 2.0G / Cm3 And About 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%. Fiber Volume Fraction 50-60%, Water Absorption <0.20%.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners. The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentals Cost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic .Shape- Garden Piller ( Height-750Mm ) Place Of Work: Sagar Dighi, Cooch Behar, West Bengal, Pin-736101 Total Nos.: 625 Nos.
