Tender For Providing Construction Of Park At Arm Ngar In Vedasandur Town Panchayat, Dindigul District., vedasandur-Tamil Nadu

Tender For Providing Construction Of Park At Arm Ngar In Vedasandur Town Panchayat, Dindigul District.; 1 Earth Work Excavation For Foundation In All Types Of Soils And Sub Soils To Full Depth ( Such As Soils In Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) Except In Rock Requiring Blasting But Inclusive Of Shoring, Shuttering And Bailing Out Water Wherever Necessary And Refilling The Sides Of Foundation With Excavated Earth Other Than Sand In Layers Of 150 Mm Thick Well Rammed And Consolidated, Depositing The Surplus Earth In Places Shown By The Departmental Officers With Initial Lead Of 10 M And Initial Lift Of 2 M. Complete As Per Tnss23 & 24, V, Vi ( S2 ) , Vii, 9, 10 2 Plain Cement Concrete Of Mix 1 : 4 : 8 ( One Part Of Cement Four Part Of Sand Eight Part Of Aggregates ) Using 40Mm Gauge Hard Broken Including Cost Conveyance Of All Materials To Site Including Formwork And Centering Labour Charges, Transporting And Placing In Position Including Shoring, Strutting, Forming Protective Bunds, Cofferdams Bailing Out Of Water Labour For Mixing Compacting, Finishing And Curing, Working At Depths, Tools And Plants And Incidental Charges Such As Sheeting, Shoring And Bracing And Their Subsequent Removal Etc., Complete As Per Standard Specification. Tndss No: 28 V, Vi ( S2 ) V, Vi ( S5a ) Vii 3 Supplying And Fillingofu / S Gravelfromapprovedquarry In Layer Of Not More Than 15Cm Thick Including Watering With All Layers And Consolidation Complying With Standard Specification Including Cost And Conveyance Of Sand At Site And All Labour Charges And All Other Incidential Charges Etc., Complete As Per Standard Specification. 4 Supplying Anderrectingsteel Centering Including Necessary Supportsfor Plain Surfaces For Reinforced Cement Concrete Works Such As Coloumn Footing, Coloumn Pedestals, Plith Beams, Grade Beams, Staircase Steps, Etc Which Requires Only Nominal Strutting Using Mild Steel Sheetsof Size 90Mm X60mm And 10Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3Mm For Boarding, Laid Over Silver Oak Joists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervels Etc Complete In All Floorscomplying With Standard Specification Without Strutting. ( Tnss No Or Nbc No 30 ( S ) 86 86 A V, Vi ( S3 ) Vii 5 Belowground Level 6 Ground Floor 7 Column 8 Supplying Ribbed Tor Steel Rodsincluding Cutting Cranking Fabricating Assembling Laying In Exact Position Tying With Soft Steel Wire 16 Or 18 Bwg Etc. Complete For All Rcc Works.As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors As Per Standard Specification. Ss86 & 86A, V, Vi ( S3 ) ( S6 ) Vii. 9 Reinforced Cement Concrete 1:1½:3 Mix ( One Part Of Cement, One And Half Part Of M- Sand And Three Part Ofaggregate ) Using 20Mm Size Iss Hbg Metal Machine Crushed From Approved Quarry Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing But Excluding Cost Of Reinforcement Etc.Complete With Std.Specifications. Tndss No: 30 V, Vi ( S3 ) , Vii-3. 10 Below Ground Level 11 Ground Floor 12 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Iiclass Ground Moulded Bricks Of Size 9X43 / 8X 23 / 4 Standard Specification Including Finishing, Curing, Etc., Complete Complying With Standard Specification 31 & Similar To 31C V, Vi ( S5 ) Vii 13 Below Ground Level 14 Ground Floor 15 Brick Partition Walls Of 10.80Cm Thickness Using Best Quality Country Bricks Of Size 8-3 / 4 X 4-1 / 4 X 2-3 / 4 In Cement Mortar 1:3 ( One Cement And Three Sand ) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. ( Hoop Iron Reinforcement Will Be Measured And Paid For Separately ) 16 Specialplastering In Cement Mortor 1:3 Mix ( One Cement, , Three Sand ) 10Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete. Complying With Std. Specifications.Tndss No: 56, 57 17 Paving The Floor With Pre-Polished Concrete Anti-Skid Tiles ( Required Shape And Design ) Of 20Mm Thick Of Approved Quality And Colour Laid In Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick And Pointed With White Cement Mixed With Colouring Pigment At The Rate Of 0.40 Kg. / Sq.M., Curing, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works ) 18 Plastering In Cement Mortor 1:5 Mix ( One Part Of Cement, , Five Part Of Sand ) 12Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete. Complying With Std. Specifications.Tndss No: 56, 57 19 Supplying And Painting The New Plastered Walls With Two Coats Of Exterior Emulsion Paint ( Weather Proof ) First Class Quality And Of Approved Colour Over A Priming Coat Including Thorough Scrapping Clean Removal Of Dirt Etc. Complete And Including Necessary Plaster Paris Putty Etc. Wherever Required.As Per ( Isi Std ) ( It Mustprovide Excellent Resistance Against The Growth Of Algae And Fungi On The Walls. And It Must Offer Excellent Protection Against Alkali And Uv Degradation And The Durability Period Should Be 5 Years. 61 V, Vi ( S4 ) 3 20 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door: Providing And Fixing Casement Doors Fabricated From Un-Plasticized Polyvinyl Chloride ( Upvc ) Sections. Profiles: The Profiles Should Be Three Chamber System Which Provides High Insulation Properties With Outer Frame 60Mm X 55Mm With An Outer Wall Thickness Of 2.4Mm. The Window Unit Should Be Designed With All Corner Joints Mitred And Fusion Welded. Windows Should Be Steel Reinforced With 25 X 24 X 25Mm Steel Reinforcement With A Thickness Of 1Mm To Have Dimensional Stability. The Sash Should Be Of 60 X 102Mm. The Mullion Should Be Of 60 X 74Mm. The Profiles Should Have Co-Extruded Seals. Hardware: All The Hardware Like Friction Stays, Handles Should Be Screwed With Self Tapping Screws. The Handles, Locks Should Be Designed So That They Cannot Be Released From Outside. Glazing: The Window System Should Be Glazed With 5Mm Plain Float Glass / 6Mm Bison Lam Installation: The Profiles Should Be Cut To Length And Welded 45 Degrees. The Window Should Be Designed Such That The Water Drainage Does Not Pass Through The Reinforcement Chamber. The Window System Should Be Fixed Directly To The Plastered Brick Wall Using Self Expanding Nylon Plug And Driving Ms Electroplated Screws Into Plug. ( Pwd Sor Page No : 65 Sl. No : 268 ) 21 Supply And Fixing Of M.S Grills For Windows, With One Coat Of Red Oxideprimer Including All Costs Such As Welding, Grinding And Fabrication Charges, Cost And Conveyance Of All Materials To Site Etc, Complete As Per Standard Specification. Including Phosphating As Per Isi With Rust Preventive Primer & Ready To Assemble Condition For Easy Installation At Site Including Dismantlingmaking Necessary With Power Drill To The Accessories Such As Supplying And Fixing Holdfasts, Plastic Bush Inserts Receiver Runner Bottom Shock Absorbers Etc. And Steel Doorcomplete As Directed By The Departmental Officer. 22 Painting The New Iron Works Such As Steel Doors, Windows, Ventilators Windows Bars, Balustrades Etc, In All Floor Withtwo Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Of Approved Quality, Colour And Brand ( To Be Approved By Executive Engineer Before Use On Works ) Over One The Existing Red Oxide Priming Coat In All Floors Excluding Cost Of Priming Coat Etc, Complete Complying With Standard Specification. ( The Make, Quality And Colour Of Paint Should Be Got Approved Bythe Engineer In Charge Before Use On Works ) ( Tnss No Or Nbc No 61 V Vi ( 54 ) 3 ) 23 Dadooing Walls With Following Best Approved Quality, White / Colour Glazed Tiles Of Following Sizes Set In Cement Mortar 1:2 ( One Cement And Two Sand ) 10Mm Thick And Pointing The Joints With White Cement Mixed With Colouring Pigments At The Rate Of 0.40 Kg. / Sq.M. Neatly In All Floors, Curing, Etc., Complying With Standard Specification And As Directed By The Departmental Officers. 39A 24 Supplying And Fixing In Positon Indian Water Closet ( Oriya Type ) Of Size 580 X 440Mm White Glazed Earthern Ware Of Approved Quality And Brand With P Or S Trap Conforming To Bis With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete 1:2:5 ( One Lime, Two Sand And Five Brick Jelly ) 100Mm Thick And Finishing The Top To The Required Slope And Including Giving Necessary Connection To Ci Soil Pipesby Dismantling Brick Masonry Wall / Reinforced Cement Concrete Roof / Floor Slab And Making Good The Dismantled Portion To The Original Condition With Leakages Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 25 Wiring With 2 X 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories Inflush With Wall With 3Mm Thick Hylum Sheet Cover With Tw Switch Box And 5A F.T. Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Light Point / Fan Point ( For Electronic Regulator ) . Etc, Complete As Per Standard Specifications. Sd 23 26 Supplying And Fixing Of Single Box Type 2 X 20 W Led Light Fitting Complete With Electronic Choke And Teakwood Round Blocks On Wall Or Ceiling With Fluorescent Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting. [ Pwd Sor Cfl Street Light Fittings Sl. No : 15B ] 27 Plain Cement Concrete 1:2:4 ( One Cement, Two Part Of Sand Andfour Part Ofhard Broken Stone Jelly ) Using 20 Mm Gauge Hard Broken Jelly For Flooring Including Laying, Consolidating, Finishing, Rendering The Top Surface Rough To Receive The Floor, Curing, Etc. Complete Complying With Standard Specification. ( The Rate Is Inclusive Of Necessary Planking For Panellingwherever Necessary And As Directed By The Departmental Officers 30 V, Vi ( S5 ) Vii & 13 28 Supplying And Laying Precast Designer Inter Locking Paver Block Confirming To Is 1568-2006 Specification Manufacturing And Laying Standard Of M40 Grade 83Mm Thick ( Table Clauses 5 And 9.14 ) Suitable For Bus Terminals , Industrial Complexes, Road On Expensive Soils Etc., Including The Cost Of Paver Block Of Size 225Mm X 12.50 Mm X 83Mm And Conveyance Of Materials To Work Site Mentioned In The Tender Schedule Cost Of Loading And Unloading Handling During Over Stone Dust Of 100Mm Thick ( Excluding The Cost Of M- Sand ) Conveyance Paver Block Cutter To Site And Hire Charges Of Vibrators And Block Cutter Operator And Labour For Leveling Thestne Dust To Paver Block Etc., Complete Isi 15658-2006. 29 Conducting Geophysical Survey, Quality And Quantity Test And Transportation Charges Etc, ( This Includes Labour Charges In The Field, Rent Of The Vehicle For Reaching The Place, Rent Of The Instrument And Excluding Charges For The Geologist ) 30 Drilling150 Mmdiaborewellin Hard Rock Areas Anywhere In The State Inculding Transportation To Site Of Work In Hardrock Areas Inculding Labour Charges For Insertion Of Ms Casing Pipe And Flushing Of Borewell And For Minutes. ( As Per Md Twad Board Chennai Letter No : F15090 / Ae / Cm / Twad / 2013 / Dated:22 / 4 / 2013 ) 31 0.00 Mt To 150.00 M 32 150.00 Mt To 180.00 M 33 180.00 Mt To 210.00 M 34 Supply And Delivery Of Unplasticised Ribbed Screen Pvc Casing Pipe Of The 150Mm Dia In 3M Length With Screwed And Socket End And Centering Guide For Every 15M Length Of Pipes As Per Is / 12818 / 92 And As Amended From Time To Time To Suit The Borewell Upto 80M Depth ( C.S ) With Isi Marking Including, Loading, Unloading , Freight, Stacking And Transit Insurance Charges Etc, Complete.Twad Page No : 22 35 Supplyanddelivery Of Three Phaseof50 Lpm200 Mtr Head Submersible Pumpset Of Motor Isi / Isowith Threephase Panel Board With Two Level Guard And Auto Startas Per Isi Specificationsincluding All Cost And Conveyance To Site Etc., Complete 36 Three Phaseof50 Lpm200 Mtr Head Submersible Pumpset Twad Page No :102 37 Supply And Delivery Of Three Phase Panel Board - Star Delta With Two Level Guard And Auto Start Suitable For Submersible Pumpsets And Accessories Including All Fittings Suitable For Submersible Pump Sets.Panel Board Should Be Provided As Per Specification. Rates Inclusive Of Packing, Loading, Freight, Unloading, Stacking, Transit Andinsurance Charges Etc, Complete Twad Page No : 114 38 Supply And Delivery Offollowing 50 Mm Dia Upvc Column Pipe And Gi Pipes And Other Special Materials Of Good Quality Includingcost Of Materials And Labour With Cost For Coveyence To Site Etccompletecomplyingwith Standardspecifications. Etc., 39 50Mm Dia Upvc Column Pipe Twad Page No : 24 40 50Mm Upvc . Elbow Pwd Page No : 107 41 50Mm Upvc . Union 42 50Mm Upvcbend 43 50Mm Gate Valve Twad Page No : 45 44 50Mm Gm N.R.V Twad Page No : 45 45 50Mm Pvc Mta Twad Page No : 27 46 50Mm End Pvc Cap Pwdpage No : 100 47 50Mm Dia Gi Flange Set Twad Page No : 44 48 50Mm M.S. Clamp Set Twad Page No : 44 49 Labour Charges For The Erection Of 50 Lpm200 Mtr Head Submersible Pumpsetin Borewell Including Fixing And Jointing Submersible Cable With Proper Clamps Upto The Starter To Required Depth And Also Fixing Of Riser Pipes To The Required Depth Valves Erection Clamps, Pressure Gauges Upto The Exterior Wall Of Pump Room And Erection Of Panel Board Consisting Of Tnicn Switches Starter, Voltmeter, Ammeter, Three Pilot Lamps Capacitor Single Phasing Preventor, Water Level Guard And Laying And Jionting The Cables Andtwin Earthing As Per Ie Rules., Complete And Testing The Pumpset And Trail Run For 10 Days. Twad Page No308 50 Supplying Laying And Jointing Pvc Pipes Of Approved Quality And Best Varity Of B Class Pipe Of The Following Sizes Including Fixing G.I Specials But Excludingcost Of Such Specials Cutting Threading Of Pipes Andfixing To Wall With Necessary Teak Wood Plugs, Clamps And Screws Masking Holes On The Wall Or Drilling Holesin Roof And Making Good The Dismandled Portions To Original Conditions With Necessary Brick Work And Concrete And Plastering Where Ever Necessary With Necessary Scafolding Charges. The Pipes Are To Be Painted With Two Coats Of Good Variety And Best Approved Quality Of Synthetic Enamel Paint Over A Priming Coat Of Red-Oxide Primer Etc., Complete. 51 32 Mm Dia, Pvc Pipe 52 20 Mmdia, Pvcpipe 53 32Mm Pvc.Elbow 54 32Mm Pvc. Bend 55 32Mm Pvc. Tee 56 32Mm Pvc. End Cap 57 20Mm Pvc. Bend 58 20Mm Pvc.Elbow 59 20Mm Pvc. Tee 60 32Mmx20mm Pvc.Reducertee 61 Supplying And Fixing Of Pvc Insulated And Sheathed 3 Core 4Sq.Mm Flat Type Copper Cable Cofirming To Is 694 / 1990 And Including Cost And Conveyance Of All Materials To Site And Labour Charges Etc, Complete As Per Standard Specification. Twad Page No ; 120 62 Suppling And Fixing In Position15mm.Diameter Pvc Screw Down Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac , Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary. 63 Supplying And Fixing In Position First Quality And Approved Variety Of 32Mm Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. 64 Supply Of Excel Double Swing Is Provided With 4No’S Of 1 ½” Gi Support ‘B’ Class Pipes Having The Height Above The Ground Level Is 8 Feet And They Are Connected With A Top Gi 2” ”B” Class Pipe Length Of 10 Feet With 3Way High Grade Cast Iron Elbow. Two Seats Are Made Up Of High Quality Rubber ( Flat Rubber Seat -1No, Flexi Rubber Seat 1No ) And Linked With Rubber Coated Chain. Double Ball Bearings Are Used For Smooth And Noise Free Movement.Colouring Is Executed By Latest Technology Of 7 Tank Process And Electrostatic Applied Pure Polyester Powder Coating In Attractive Colours And No Sharp Edges. Iso & Nsic Certified Company.12 X 12 Feet 65 Supply Of Excel Double See Saw With Metalseat Is Provided With 7Ft Long 1 ½” “B” Class Gipipe 2Nos Having Two Metal Seats Each Withback Metal Support And Front Handles.Each See Saw Is Equipped With Ball Bearings Atthe Centre For Smooth Up And Downmovements.5Ft Long 2” Centre Gi “B” Class Pipe Is Closed By3 Way High Grade Cast Iron Elbow. On Bothsides To Accommodate 1 ½” Gi “B” Classsupport Pipes.Painting Is Executed By Latest Technology Of 7Tank Process And Electrostatic Applied Purepolyester Powder Coating In Attractive Coloursand No Sharp Edges.Iso & Nsic Certified Company- 10 X 7 66 Supply Of Excel Slide Frp - 6Ft Is Provided Withfrp Slide Having The Chute Length Of Nearly 12Ftand The Centre Support Pipes Height Above Theground Level Is 6Ft.25Mm, 38Mm & 32Mm G.I “B” Class Pipes Areused.Painting Is Executed By Latest Technology Of 7 Tankprocess And Electrostatic Applied Pure- 20 X 5 Feet 67 Supply Of Excel Rainbow Ladder Is Provided With Height At The Centre Above Ground Is 6Ft, Width Of 12Ft. 1Inch Gi “B” Class Pipes Are Used.Painting Is Executed By Latest Technology Of 7 Tank Process And Electrostatic Applied Pure Polyester Powder Coating ( For Outdoor ) In Attractive Colours And No Sharp Edges.-10 X 3 68 Supply Of Excel Park Bench Regular Is Made Up Gi “B” Class Rectangle Pipes And Provided With The Length Of 5Ft - With Back Rest.7’X5’ 69 Lightingarrangement 70 Supply And Fixing Of Gi Tubular Pole For 4.00 M Lenth Singale Bracetpolewith Base Plate 250 Mm X 250 Mm X 6 , 100Mm Id Etc, Complete. 71 Supply And Fixing Of 25 W Led Street Light 72 Earthingas Perpwd Standredspecification With On 2 Mclassb Gi Pipe Earth Electode And 32 Mmbrase Cablewith Earth Connaction Etc , Complete. 73 Supply And Laying Of 4 X 6 Sq.Mm. Pvc Armoured Ltug Cable In Suitable Size Hdpe Pipe In A Trench To Beexcavated At A Depth Of 0.75 Metre And Refilling The Earth To Make Good.Sd- 201

Refer document

INR 38000.0 /-

Refer document

NAME OF WORK:Construction of Park at ARM Ngar in Vedasandur Town Panchayat, Dindigul District.

Sl. No.	Item Description
1	Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS23 & 24, V, VI (S2), VII, 9,10
2	Plain Cement Concrete of mix 1 : 4 : 8 (One part of Cement four part of sand eight part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII
3	Supplying and FillingofU/S Gravelfromapprovedquarry in Layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per Standard Specification.
4	Supplying anderrectingsteel centering including necessary supportsfor plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorsComplying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII
5	BelowGround Level
6	Ground Floor
7	COLUMN
8	Supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. SS86 & 86A,V, VI (S3) (S6) VII.
9	Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part ofaggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
10	Below Ground Level
11	Ground Floor
12	Brick work in CM 1:5 (one cement & five sand) using IIclass ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing,etc., complete complying with standard specification 31 & Similar to 31C V, VI (S5) VII
13	Below Ground Level
14	Ground Floor
15	Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4" x 4-1/4" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
16	SpecialPlastering in Cement Mortor 1:3 Mix (one Cement,, Three sand)10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57
17	Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
18	Plastering in Cement Mortor 1:5 Mix (one part of Cement,, five part of sand)12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57
19	Supplying and Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3
20	Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. (PWD SOR Page No : 65 Sl. No : 268)
21	Supply and fixing of M.S Grills for Windows,with one coat of Red oxidePrimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel DoorComplete as Directed by the Departmental Officer.
22	Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved bythe engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3)
23	Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 39A
24	Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipesby dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.
25	Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23
26	Supplying and Fixing of single box type 2 x 20 W LED Light fitting complete with Electronic Choke and Teakwood Round blocks on wall or ceiling with fluorescent tube with PVC unsheathed copper leads from terminals to the fitting.[ PWD SOR CFL STREET LIGHT FITTINGS Sl. No : 15b ]
27	Plain Cement Concrete 1:2:4 (one cement, two part of sand andfour part ofhard broken stone jelly) using 20 mm gauge hard broken jelly for flooring including laying,consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 V, VI (S5) VII & 13
28	Supplying and laying Precast Designer Inter locking Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 83mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of M- Sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling thestne Dust to paver block etc., complete ISI 15658-2006.
29	Conducting Geophysical survey, quality and quantity test and transportation charges etc, (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist)
30	Drilling150 mmDiaborewellin Hard rock areas anywhere in the state inculding transportation to site of work in hardrock areas inculding labour charges for insertion of MS casing pipe and flushing of borewell and for minutes. ( As per MD TWAD Board Chennai Letter No : F15090/AE/CM/TWAD/2013/ Dated:22/4/2013 )
31	0.00 mt to 150.00 m
32	150.00 mt to 180.00 m
33	180.00 mt to 210.00 m
34	Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upto 80m depth (C.S) with ISI marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.TWAD Page No : 22
35	Supplyanddelivery of Three phaseof50 LPM200 mtr Head Submersible pumpset of Motor ISI/ISOwith ThreePHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO STARTas per ISI Specificationsincluding all cost and conveyance to site etc., Complete
36	Three phaseof50 LPM200 mtr Head Submersible pumpset TWAD Page No :102
37	Supply and delivery of Three Phase Panel Board - Star Delta with two level Guard and auto start suitable for Submersible pumpsets and accessories including all fittings suitable for Submersible pump sets.Panel Board should be provided as per specification. Rates inclusive of Packing, Loading, Freight, Unloading, Stacking, Transit andInsurance charges etc, complete TWAD Page No : 114
38	Supply and delivery offollowing 50 mm dia UPVC Column Pipe and GI Pipes and Other Special materials of good quality includingcost of materials and labour with cost for coveyence to site etcCompletecomplyingwith standardSpecifications. etc.,
39	50mm dia UPVC Column pipe TWAD Page No : 24
40	50mm UPVC . Elbow PWD Page No : 107
41	50mm UPVC . union
42	50mm UPVCBend
43	50mm Gate Valve TWAD Page No : 45
44	50mm GM N.R.V TWAD Page No : 45
45	50mm PVC MTA TWAD Page No : 27
46	50mm end PVC Cap PWDPage No : 100
47	50mm dia GI Flange set TWAD Page No : 44
48	50mm M.S. Clamp set TWAD Page No : 44
49	Labour Charges for the Erection of 50 LPM200 mtr Head Submersible pumpsetin borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TNICN switches starter, voltmeter,Ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables andtwin earthing as per IE rules., complete and testing the pumpset and trail run for 10 days. TWAD page No308
50	Supplying laying and jointing PVC Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.
51	32 mm dia,PVC pipe
52	20 mmdia,PVCpipe
53	32mm PVC.Elbow
54	32mm PVC. Bend
55	32mm PVC. TEE
56	32mm PVC. End cap
57	20mm PVC. Bend
58	20mm PVC.Elbow
59	20mm PVC. TEE
60	32mmx20mm PVC.reducerTEE
61	Supplying and fixing of PVC insulated and sheathed 3 core 4sq.mm Flat type Copper cable cofirming to IS 694/ 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification. TWAD page No ; 120
62	Suppling and fixing in position15mm.diameter PVC screw down tap(heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary.
63	Supplying and fixing in position first quality and approved variety of 32mm Gun Metal Gate Valve (Heavy type) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
64	Supply of Excel Double swing is provided with 4no’s of 1 ½” GI support ‘B’ class pipes having the height above the ground level is 8 feet and they are connected with a top GI 2” ”B” class pipe length of 10 feet with 3way High Grade Cast Iron Elbow. Two seats are made up of High quality rubber(Flat rubber seat -1no,Flexi rubber seat 1no) and linked with rubber coated chain. Double ball bearings are used for smooth and noise free movement.Colouring is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. ISO & NSIC Certified company.12" x 12" Feet
65	Supply of Excel Double see saw with metal seat is provided with 7ft long 1 ½” “B” Class GI pipe 2nos having two Metal seats each With back Metal support and front handles. Each see saw is equipped with ball bearings at the centre for smooth up and down Movements. 5ft long 2” centre GI “B” class pipe is closed by 3 Way High Grade Cast Iron Elbow. on both sides to accommodate 1 ½” GI “B” Class support pipes. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. ISO & NSIC Certified company- 10 " X 7 "
66	Supply of Excel Slide FRP - 6FT is provided with FRP slide having the chute length of nearly 12Ft and the centre support pipes height above the ground level is 6Ft. 25mm, 38mm & 32mm G.I “B” class pipes are used. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure- 20 " X 5" Feet
67	Supply of Excel Rainbow Ladder is provided with height at the centre above ground is 6ft,width of 12Ft. 1inch GI “B” Class pipes are used. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating (for outdoor) in attractive colours and no sharp edges.-10 " X 3 "
68	Supply of Excel park bench regular is made up GI “B” class rectangle pipes and provided with the length of 5ft - with back rest. 7’x5’
69	LightingArrangement
70	Supply and fixing of GI Tubular pole for 4.00 m Lenth singale bracetpolewith base plate 250 mm X 250 mm X 6 , 100mm ID etc, complete.
71	Supply and fixing of 25 W LED Street Light
72	Earthingas perPWD standredSPECIFICATION WITH ON 2 MClassB GI PiPE Earth Electode and 32 mmbrase cablewith earth connaction etc , complete.
73	Supply and Laying of 4 x 6 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.SD- 201