Tender For Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) 6000L - Bs Vi With Chassis In Naranammalpuram Town Panchayat.

Sharing tender

Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) 6000L Bs Vi With Chassis In Naranammalpuram Town Panchayat. , Supply And Delivery Of Cesspool Tankerwith Following Specifications Features - A) Vacuum Pump Type- Rotary Sliding Vane Lubrication - Forged Oil Lubrication Cooling - Aircooled B) Suction Hose DiaLength Qty -4 / 3 Mtr. / 10 Nos With Suitable Clamp & Washer And Holder In Both Side Of Tanker. C) Sludge Suction & Drain Value- Size 4 Type- Knife Gate / Ball Valve Heavy Duty (For Suction And Delivery Separately.) D) Hyd.Pump Type & Drive- Not Applicable , Capacity A) Tank Volume - Water Storage Tank -1000 Litre Sludge Storage Tank -5000 Litre Built By 6 Mm Thick Ms Plate Manually Open Type Rear Door And Another Side Fixed Dish End Type. In Sludge Tank Side Inner Slide Plate Must Provided At An Angle Of 7 Degree, And Also Provide Reinforecement To Avoid Buckleness In Vaccum And Pressure Operation. B) Vacuum Pump Make - Imported Brand Only - Jurop / Mono / Gardrner Denvermistrel / Battioni Only. Flow / Vacuum - 500-550 Cum ./Hr./90% Mode Of Operation - Suction And Pressure C) Jetting Pump Make - Prattisoli Or Equivalent Imported Make Only. Working Pressure - 150-160 Bar Hose Length - 120 M - Imported Brand Only Size - 3/4 Dia. Water Flow For Pump Of Jetting Machine - 80-100 Lpm Minimum Brust Pressureof Jetting Hose - 250-300 Bar Maximum Working Pressure Of Jetting Hose - 100-120 Bar , Safety A)Water Level Indicator - Type/Qty - Tube Type / 2 Nos - 2 Dia. B)Pressure Relief Valve - Size/Qty- 2/1 Nos. C)Vacuum Relief Valve - Size/Qty-1.5/1 Nos D)Gauges - Size/Qty - 6 Dial Vaccum Gauge & Pressure Gauge Separately. , Mounting- Chassis A) Gvw - 12 Ton B) Emission Norms - As Per Local Rto C) Chassis Engine Output - Min.90 Hp D) Driver’S Cabin Type - Single (Day) Cabin E) Make -Ashok Layland/ Tata/ Eicher/ Equivalent With Pto With Emission Norms Bsvi F) Make/Model/Wb/Hp/Side Pto Provision- Any Other Equivalent Model Of Other Chassis Manufacturers G) Scope - Customer H) Side Pto Provision- Provision Required , Dimensions - Equipment A) Equipment Length- 4500-5150 Mm Approx B) Equipment Height- 1500-2200 Mm Approx C) Overall Width- 2000-2250 Mm Approx D) Overall Length - 3000-3500 Mm Approx E) Equipment Rear Overhang -600-1600 Mm Approx , Painting - Surface Preparation And Finish A) Eqiuipments Exterior - Spray-Painted With Two Coats Of Superior Qulity Anti-Corrosive Primer And Two Costs Of Enamel Metal Paint Colour Code Will Be As Per Customer / Tender Requirements B) Tanks Interior- Coated With 2 Coats Of Superior Quality Anti-Corrosive Gray Epoxy Paint For The First One Year The Operation And Maintenance Cost Per Cesspool Tanker Shall Be The Responsibility Of The Supplier , For The First One Year The Maintenance Cost Per Cesspool Tankerand Also Commissioning Of Vehicle And Training Of Concern Tps Operator For A Period Of Minimum One Week Shall Be The Responsibility Of The Supplier.