Procurement Of Different Cast Basalt Lined Fittings For Ash Slurry Disposal Piping For Ahp-Mm, Stg-Ii Through Approved Capex 2023 24,Sgtpp,Wbpdcl. , Procurement Of Different Cast Basalt Lined Fittings For Ash Slurry Disposal Piping For Ahp-Mm, Stg-Ii Through Approved Capex 2023-24 , Bend,Ms,Cast Basalt,430X508,90Deg,R-1290 For Ash Slurry Disposal Piping Drawing No: I-5034-M-Ga-111 Sheet 2 Of 2 Indure New Delhi Id 430 X R1290 X 90 Deg, Od 508, Along With Fixed Ms Flanges At Both Ends, As Per Is: 2062, Flange Thickness: 28 Mm.Hole Dia: 28.5 Pcd Of Hole: 635 Mm, 20 Nos. Of Hole ( Hardness Of Basalt Lining: 8 Mhos (Min.), Bending Strength: 300 Kg/Cm2 (Min.), Compressive Strength: 4500 Kg/Cm2 (Min.), Dendity: 2.8-2.9 G/Cm3, Ms Pipe: 500Nb-6Mm Thk(As Per Is: 3589), Ms Flange: As Per Is:2062, Working Pr. 5.8 Kg/Cm2, Test Pr. 8.7 Kg/Cm2 ) , Lateral,Ms,Cast Basaltline,430X508x1550 For Ash Slurry Disposal Piping Drg No: I-5034-M-Ga-111 Sheet 2 Of 2 Indure New Delhi Id: 430 Mm, Od: 508 Mm, Barrel Length: 1550 Mm, Branch Length: 1100 Mm, With Fixed Ms Flanges At Multiple Ends, As Per Is:2062,Fla Thickness: 28 Mm.Hole Dia:28.5Mm, Pcd Of Hole: 635 Mm, 20 Nos. Of Hole ( Hardness Of Basalt Lining: 8 Mhos (Min.), Bending Strength: 300 Kg/Cm2 (Min.), Compressive Strength: 4500 Kg/Cm2 (Min.), Dendity: 2.8-2.9 G/Cm3, Ms Pipe: 500Nb-6Mm Thk(As Per Is: 3589), Ms Flange: As Per Is:2062, Working Pr. 5.8 Kg/Cm2, Test Pr. 8.7 Kg/Cm2 ) , Ms Tee Lined Cast Basalt Size:Cb Id 436 For Ash Slurry Disposal Piping Cast Basalt Size: Cb Id 436 X 1000 Mm Barrel Lg. X 500 Mm Branch Lg.Along With Fixed Ms Flanges At Each End, As Per Is: .2062, Flange Thk: 28±1Mm.Hole Dia: 28Mm, Pcd Of Hole: 635 Mm, No. Of Hole: 20. ( Hardness Of Basalt Lining: 8 Mhos (Min.), Bending Strength: 300 Kg/Cm2 (Min.), Compressive Strength: 4500 Kg/Cm2 (Min.), Dendity: 2.8-2.9 G/Cm3, Ms Pipe: 500Nb-6Mm Thk(As Per Is: 3589), Ms Flange: As Per Is:2062, Working Pr. 5.8 Kg/Cm2, Test Pr. 8.7 Kg/Cm2 ) , Pipe,Ms,Cast Basalt Lined,430X508x2000 For Ash Slurry Disposal Piping Drawing No: I-5034-M-Ga-111 Sheet 2 Of 2 Indure New Delhi Id: 430 Mm, Od: 508 Mm, Straight Length: 2000 Mm, Along With Fixed Ms Flanges At Both Ends As Per Is: 2062, Flange Thickness: 28 M Dia: 28.5Mm, Pcd Of Hole: 635 Mm, 20 Nos. Of Hole ( Hardness Of Basalt Lining: 8 Mhos (Min.), Bending Strength: 300 Kg/Cm2 (Min.), Compressive Strength: 4500 Kg/Cm2 (Min.), Dendity: 2.8-2.9 G/Cm3, Ms Pipe: 500Nb-6Mm Thk(As Per Is: 3589), Ms Flange: As Per Is:2062, Working Pr. 5.8 Kg/Cm2, Test Pr. 8.7 Kg/Cm2 ) , Flange, Ms, 500 Nb ( Ms Counter Flange For Cast Basalt Fittings, Id: 461 Mm, Od: 698.5 Mm, Thickness:28 Mm, As Per Indure Drawing No: I-5034-M-Ga-111 Sheet 2 Of 2 ) , Bolt With Nut,Ht Hex Head,Washer,M24x120 # Bolt With Nut Ht Hex Head Bolts Along With Nut And Washer Size: M24x120 Grade-10.9 As Per Is:1367 Part Thread ( Half Thread With 1 Nut & 2 Washer, Make: Tvs/Lps/Unbrako )
