Tender For Repairs To The Floor In Non-Filling Area At Ofk, khamaria-Madhya Pradesh

Tender For Repairs To The Floor In Non-Filling Area At Ofk ; 1 Demolition Cement Concrete ( Unreinforced ) Of Any Description And In Any Position Not Otherwise Specifically Provided For. 2 M & L, Cement Concrete Type B2 1:2:4 ( 40 Mm Graded Aggregate ) In Foundations, Filling And Mass Concrete. 3 M & L, Providing Reinforced Cement Concrete ( Design Mix ) M-25 ( 20Mm Graded Aggregate ) In Foundations, Including Rafts, Footings, Foundation Beams, Plinth Beams, Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete. 4 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter, Fair Finished Surfaces Of Concrete Flat. 5 M&L, Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. 6 Brushing Neat Cement Slurry With 3.0 Kg Of Cement Per Sq. Metre. 7 M & Lchemically Cleaning Of Existing Oily / Greasy Surfaces Of Cement Concrete. Make ( Cleaners / Degreaser ) : Sika / Dr. Beck / Cipy / Krayon / Asian / Berger Or Equivalent. 8 M & L, Wear Resistance Flooring By Use Of Vacuum Dewatering Method And Power Toweling Method With Skim Floater, Concrete Flooring Of M-30 Grade Mixed And Transported Through Rmc, Using Ppc Cement Of Is Brand Cement With Graded Aggregates Thickness Of Rcc 110 Mm ( Max ) , With Smooth And Fair Surface Achieving Hard Top Wear Surface Using Chemical Hardner As Specified Quantity Per Unit Area Spread While Power Trowelling In Progress And Including Following Works / Specification ( A ) By Providing Concrete Surface To Achive Flexutural Strength Not Less Than 35Kg / Sqcm ( A ) Fixing Of Steel Frame Work And Removal After Laying Of Concrete. ( B ) Making Of Suitable Contraction Joints And Same Is To Be Fitted With Sealing Compound. ( C ) Power Trowelling And Finishing To Achive Required Finish Surface. 9 M & L, Mild Steel Tmt Bars 6 To 8 Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips. 10 M & L, Filling / Sealing Of Expansion / Contraction / Dummy ( Working ) Joints ( Cross Section 12Mm X 150Mm ) With Foam Based Breaker Rods ( White ) And Pu Coloured Sealent ( 12Mm X 25Mm In Cross Section ) . Make ( Pu Coloured Sealent ) : Sika / Dr. Beck / Cipy / Krayon / Asian / Berger Or Equivalent. 11 Removing Building Materials Etc.To A Distance Of 1.5Km Or Under, Beyond The Lead Included In The Rates, Including Loading, Unloading And Stacking At The Destination.

Refer document

INR 60801.0 /-

INR 30.40 Lakhs /-