Tender For Provision Of Certain Special Repair Work At Age B/R-Ii And Age E/M Under Ge Babiba Cantt., babina-Uttar Pradesh

Tender For Provision Of Certain Special Repair Work At Age B / R-Ii And Age E / M Under Ge Babiba Cantt.; 1 Taking Down Cement Plaster On Brick Or Stone Walls Etc Incl Racking Out Joints Hacking For Key And Scrabbing Down With Water Etc Complete All As Specified And As Directed. 2 M&L Renderig 15Mm Thick In Cementmortar 1:6 Overfair Faces Ofbrick Or Concrete Surface Of Wall Rendering Is To Be Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 3 M&L For 10 Mm Thick Rendering In Cement Mortar 1:3 On Concrete / Brick Surfaces Finish Even And Fair Including Mixing Ofwater Proofing Compound As Per Manufacturer Instructionetc Complete All As Specified And As Directed.Note :- Water Proofing Compound Shall Be Measured Separately Assupply Only 4 Supply Only Integral Water Proofing Compound Complete All As Specified And As Directed. 5 M & L For Preparing Of New Surfaces Andapplying Two Coat Of White Wash On Walls Complete All As Specified And As Directed. 6 M & L For Preparing Surfaces Of Wall By Complete Removal Of Existing Treament Andapplying Two Coat Of White Wash On Walls Complete All As Specified And As Directed. 7 M & L For Complete Removal Of Existing Treament Andapplying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistant Priming Paint On External Surface Complete All As Specified And As Directed. 8 Taking Down Chowkhat Or Frames With Shutters ( Without Taking Off Shutters From The Frame ) Not Exe 1.5 Sqm Each Etc Complete All As Specified And As Directed. 9 Taking Down Chowkhat Or Frames With Shutters ( Without Taking Off Shutters From The Frame ) Exc 1.50 Sqm But Not Exe 4.0 Sqm Each Etc Complete All As Specified And As Directed. 10 S & F Steel Window Withz Sections, Side Hung Shutters Including Box Type Hinges With Steel Handle Peg Stay, Glazing Bar, Dovetailed Or Welded For Recieving Glass After And Including Taking Out Unserviceable Steel Window Complete All As Specified And As Directed. 11 S & F Ditto As Per Item No-10 , But Without Glazing Barsw Complete. 12 S & F 3 Mm Thisk Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Squareb N. Exc 0.50 Sqm In Each Plane Complete All As Specified And As Directed. 13 M&L Framed Work As Grills, Gratings, Etc With Ends Of Bars Shouldered And / Or Riveted Into Spikes; Or Forged Into Spikes, Framed Guard Bars; Barred Iron Doors And Similar Work Confirming To Fe 290. Gd-E-165 Complete All As Specified And As Directed. 14 M&L For Two Coat Synthetic Enamel Paint Over One Coat Of Red Oxide Primer On New Steel Surface Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth Etc Complete All As Specified And As Directed. 15 S&F Factory Made Solid Panel Pvc Door Shutter 30Mm Thick ( Style ) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck In Side With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail And Bottom Rail, Paneling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded / Sealed To Thestiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cementall As Directed And Specified By Engineer-In-Charge. 16 S & F Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube Etc Complete All As Specified And As Directed. 17 S And F Of Pressed Steel Frames For Doors Of Size ( 165X60 ) Mmwith One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed All Other As Directed By Engineer In Chagre 18 S&F30 Mm Thick Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Etc Complete. 19 Supply And Fix 100Mm Size Mild Steel Butt Hinges Medium Weight, Cold Rolled Complete All As Specified And As Directed By Engr-In-Charge. 20 S&F 100 Mmbutt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed Type B-21 Complete All As Specified And As Directed. 21 S&F 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast- Aluminium Alloy Complete All As Specified And As Directed.. 22 S&F Aluminium Anodised Barrel Tower Bolts Of Extruded Section And Fixed Fixed 200 Mm Long Etc Complete All As Specified And As Directed. 23 Cutting Holes In Brick Walls Built In Cement Mortar For Inserting Hold Fasts And Making Good Dismantled Portion In Cm 1:3 Or Cement Conc 1:2:4 Type B1 As Required Exc Half Brick But Not Exc Full Brick Wall Complete All As Specified And As Directed. 24 S&F Aluminum Handles Cast Type Anodized 150 Mm Size Etc Complete All As Specified And As Directed 25 S&F, 150Mm Floor Door Stopper Aluminium Alloy Body Complete All As Specified And Directed. 26 M&L Fortwo Coat Synthetic Enamel Paint Over One Coat Of Pink Primer On New Wooden Surface Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth Etc Complete All As Specified And As Directed 27 Demolition Of Cement Concrete ( Unreinforced ) In Ground Floor And Paving N, Exc 15Cm Thickness Below Or Above Ground Level ) Complete All As Specified And As Directed 28 Sunken Waterproofing Treatment By Smartcare Or Equivalentin Following Steps :- ( I ) . Surface Preparation: Minor Cleaning Work, Removal Of Loose Concrete And Filling Cracks With Polymer Modified Mortar Using Smartcare Srp Ii ) . Making Of Angle Fillets All Around The Periphery Of The Wall With Polymer Modified Mortar Using Smartcare Srp ( Iii ) . Supplying & Grouting The Gaps Around The Pipe / Inserts With Smartcare General Purpose Grout, A Non-Shrink Cementitious Waterproof Grout. The “Nahani” Trap, Etc Is To Be Fitted Securely In The Same Manner & The Gaps Around It To Be Grouted With Non-Shrink Grout Or Equivalent ( Iv ) Supplying And Applying High Performance Hybrid Polyurea Elastomeric Waterproofing Coating Cold Applied Of Spray / Brush Applied, Smartcare Ultron Liquid Membrane And All As Specified And As Directed. Make- Aisan Paint / Fosroc / Pidilite 29 M & L For Cement Concrete Type D-2 ( 1:4:8 ) Using 40Mm Graded Stone Aggregate As Inunder Floor Complete All As Specified And As Directed. 30 M&L For 75Mm Cement Concrete 1:3:6Type C1 , Using 20 Mm Graded Crushed Stone Aggregatesas In Plinth Protection / Path Laid In Alternate Panel , Joint Filled With Bitumen 85 / 25, Surface Finished Even And Fair Complete All As Specified And As Directed. Note : The Cost Of Materials For Forming And Filling Joints Deemed To Be Included In The Unit Rate Quoted By The Tenderer. 31 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store And Rubbish Off The Premises All As Specified And Directed. 32 M&L 25 Mm Thick Cement Concrete 1:2:4 Type B-0 ( Using 12.5Mm Graded Crushed Stone Aggregate ) As In Sub Base Of Floor Complete All As Specified And As Directed 33 M&L Non Skid Ceramic Colour Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tiles Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm Set And Jointed In Neat Cement Slurry And Pointed In Colour Cement To Match As In Floor Including 15 Thick Cement Mortar Screed Bed 1:4 Complete All As Specified And As Directed 34 M&L Glazed Ceramic Colour Tiles 300Mmx600mm X7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement On Vertical Surfaces Such As Skirting / Dado Including 10 Mm Thick Rendering / Screeding In Cement Mortar 1:3, Complete All As Specified And Directed 35 Taking Down Old Existing Unserviceable Hdpe Water Storage Tank ( Pvc / Rcc ) And Of Capacity Exc 500 Ltrs But N Exc 1000Ltrs Complete As Directed 36 S&F 1000 Ltr Capacityrotational Moulded Polyethylene Water Storage Tank ( Cylindrical Vertical With Closed Top ) White , Isi Marked , Triple Layered Construction Hoisted And Fixed In Position Including S&F 20Mm Dia Gi Pipe Medium Grade Washout Pipe 450Mm Long With Plug And 20Mm Dia Gi Pipe Medium Grade Overflow Pipe 600Mm Long With Fitting Etccomplete All As Specified In Ssr Part -I 2009 Complete All As Specified And As Directed. 37 S&F In Repair Of 25Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High Density Plastic Ball Screwed For Iron Pipe And Fixed ( Minimumweight 15Mm-142Gms 20Mm-210Gms / 25Mm-455Gms / 40Mm-690Gms And All As Specified And As Directed. 38 S&F In Repair 20Mm Gun Metal Globe Orgate Valve With Iron Wheel Head Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And Directed 39 S&F In Repair 25 Mm Gun Metal Globe Orgate Valve With Iron Wheel Head Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And Directed 40 Taking Down Or Up Steel Tubing Andconnection Including Cleaning For Refixing Or Removal To Store15 Mm Dia Complete All As Specified And As Directed. 41 Taking Down Or Up Steel Tubing Andconnection Including Cleaning For Refixing Or Removal To Store 20 Mm Dia Complete All As Specified And As Directed. 42 Taking Down Or Up Steel Tubing Andconnection Including Cleaning For Refixing Or Removal To Store 25 Mm Dia Complete All As Specified And As Directed. 43 Supply And Fixing, 15Mm Dia Bore Jointing And Testing Galvanised Iron Tube Medium Grade With All Fittings Such As Bends, Elbowssockets, Reduces Etc And Fixed To Wall, Ceiling Or Laid In Floor With New Fittings For The Following Sizes , The Rate Also Include Cutting Through Walls Floors Etc Complete All As Specified And As Directed. 44 Supply And Fixing, 20Mm Dia Bore Jointing And Testing Galvanised Iron Tube Medium Grade With All Fittings Such As Bends, Elbowssockets, Reduces Etc And Fixed To Wall, Ceiling Or Laid In Floor With New Fittings For The Following Sizes , The Rate Also Include Cutting Through Walls Floors Etccomplete All As Specified And As Directed. 45 Supply And Fixing, 25Mm Dia Bore Jointing And Testing Galvanised Iron Tube Medium Grade With All Fittings Such As Bends, Elbowssockets, Reduces Etc And Fixed To Wall, Ceiling Or Laid In Floor With New Fittings For The Following Sizes , The Rate Also Include Cutting Through Walls Floors Etc Complete All As Specified And As Directed. 46 S&F In Repair 15 Mm Bore Stop Valve ( Angle Cock Two In One ) Cast Copper Alloy Fancy Type Chromium Plated, Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipes Or For Union And Fixed Complete All As Specified And As Directed. 47 S&Fin Repair 15Mm Bore Bib Taps Cast Copper Alloy Fancy Type Chromium Plated Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed 48 S&F In Repair 10 Ltr Capacity Pvc Low Level Flushing Cistern White, Isi Marked Make As Specified With Inlet, Float Valve And Handle Including Breacket With 32Mm Dia Pvc Pipe 600Mm Long Complete All As Specified And Directed 49 S&F Vitreous China Squatting Pan Orissa Pattern Size 580Mmx440mm White With Integral Foot Rest ( Excluding Flushing Cistern And Flush Pipe ) With P Or S Trap, Front Or Back Inlet Including Connection To Trap And To Flushing Pipe Anti Syphonage Pipe Etc Complete All As Specified And As Directed 50 S&F In Repair Vitreous China Wash Handbasin, White Flat Back, Size 550Mmx400mm Fixed On And Including Cast Iron Cantilever Brackets, 32Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And As Directed .Note: Pillar Tap Shall Be Measured As Supply Only Under Respective Items 51 S&F In Repair Pvc Connection 15Mm Dia And 450Mm Long With Both Ends Brass Fly Nut Complete All As Specified And As Directed ( Make Prayag / Polytuf ) 52 S&F 15Mm Dia Pillar Taps Cast Copper Alloy With Capstan Heads, Cromium Platedscrewed Down High Pressure With Or Without Letteredhotor Cold With Long Screw Shanks Abd Fly -Nuts Screwed For Iron Pipe And Fixed Complete All As Specified And As Directed. 53 S&F Pvc Floor Trap Size 75Mm Dia Out Let With Grating Including Connection To Waste Pipe With Cement Jointingcomplete All As Specified And Directed 54 Dismantling Of Pvc Or Ac Drain Pipe Jointed In Cement Mortar Of Size 100Mm Bore Complete All As Specified And As Directed. 55 S&F Pvc ( Swr ) Pipes 110Mm Dia Single Sockted In Any Length With Rubber Ring Joints Laid In Trenches Complete All As Specified And As Directed. 56 S&F Pvc ( Swr ) Pipes 110Mm Dia Single Sockted In Any Length With Rubber Ring Joints Fixed To Walls Complete All As Specified And As Directed. 57 S&Fpvc ( Swr ) Bends 110 Mm Boreofany Radius Complete All As Specified And As Directed. 58 S&F Pvc ( Swr ) Junction Single, ( Single T ) Equal Or Unequal 110 Mm Bore Complete All As Specified And As Directed. 59 S&F Pvc ( Swr ) Vent Cowl 110 Mm Complete All As Specified And As Directed. 60 S&F In Repair 600Mm X450mm Looking Mirror 5Mm Thick Of Selected Quality Glass, Mounted On 6Mm Thick Commercial Ply Wood And Fixed To Wooden Plugs With Chromium Plated Brass And Cup Washer Complete All As Directed 61 S And F Of Grating Doom 100 Mm Dia Of Ptmt ( Minimum Weight 25 Gms ) Complete All As Specified And As Directed. 62 S & F In Repair Of Towel Rail 450Mm Long Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden / Plastic Cleats ( Minimum Weight 190Gms ) 63 M & L For Cement Concrete1:5:10 Type D-2 ( Using 40Mm Graded Stone Aggregate ) As In Under Floor Using Brick Bats And As Directed By Engineer In Charge. 64 Demolition Ofbrickwork Of Stone / Boulder Masonry, Build In Lime Mortar Including All Quoins, Arches, Pillars Etc, But Excluding Ashlars Facings, Dressed Stonework And Precast Concrete Articlesl Etc Complete. 65 M&L Brick Work With Fly Ash Bricks ( Fasb ) Conferming To Is 12894, Of Strength M-10 Straight Or Curved On Plan Exc 6M Mean Radious Built Cement Mortar 1:4 Complete ( On Parapet Wall ) All As Specified And As Directed. 66 M And L For Cutting Channels, Grooves Or Rebates N Exc 15Cm Girth, And Trimming Surface With Or With Out Reinforceout Complete All As Specified And Directed. 67 S&F Mild Steel Tmt Bars 10Mm Dia And Over As In Reinforcement, Cut To Length And Bent To Shape Required Incl Bending, Cranking, Spirally Hooping For Columns, Hooking Ends And Binding With And Incl Mild Steel Annealed Wire Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. 68 Ditto All As Per Item No 68 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders 69 Dismantling Of Asbestos Cement ( Corrugated, Semicorrugated, Etc. ) Sheets In Roof Coverings Complete All As Specified And Directed. 70 Dismantling Of Plain Or Corrugated Steel Sheeting, Any Guage, Thickness Includidng Nainital Or Similar Pattern In Roof Covering Complete All As Specified And Directed. 71 S & F Pre- Painted Galvalume Aluminum Zink Coating Gi Based Corrugated Steel0.50Mm Thick And Az- 150 Of An Colour Having Tensile Strength Of 550Mpa As In Roof Covering / Cladeding To Wall, Fixed With Self Tapping Screw As Specified Complete All As Specified And Directed. 72 S & F Pre- Painted Galvalume Aluminum Zink Coating Gi Based Plain Steel0.50Mm Thickand Az- 150 Of An Colour Having Tensile Strength Of 550Mpa As In Roof Covering / Cladeding To Wall, Fixed With Self Tapping Screw As Specified 73 Dismantling Timber Scantling Unframed Work 40 Sq. Cm And Over In Section In Any Position Complete All As Specified And As Directed. 74 S&F Roof Trusses ( Framed ) , Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing ( Beam, Tee, Angle, Channel Or Flat Sections ) Including Distance Pieces, Cleats Etc.Fe-290 Gde E-165 All As Specified And Directed. 75 M&L Mild Steel Work In Hand Rails, Half Round Or Other Steel Section Or Core For Wind Ties For Roof Including Securing Bolts, Post And Struts Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire Etc And Similar Work Confirming To Fe-290 Gde E-165 76 M&L For Preparation Of New Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Over 10Cm In Width Or Girth, Not Otherwise Described Complete All As Specified And Directed. 77 Dismantling Walland Ceiling Boards ( Fibre, Pump, Insulation Etc, ) Or Insulation Boards Of Any Thickness Including Cover Fillets Complete All As Specified And Directed. 78 M&L For Aluminium Anodised Snap Grid Frame Work Of The Following ( A ) Main Tee Section 36.5X25x1.4Mm Size ( Wt Not Less Than 0.24Kg / Rm ) ( B ) Section Alongwith Wall Angle Of Size 40X25x2mm Size ( Wt Not Less Than 0.36Kg / Rm ) ( C ) Cross Tee Section 23.5X26.4X1.4Mm Size ( Wt Not Less Than 0.191Kg / Rm ) ( D ) Snap Grid Shall Be Fixed To G.I Flat 40 X 3Mm Supporting Hangers Consisting Of 4Mm Dia G.Irodn.Exc 1.20M Length With J Bolts Nuts And Washer Etc As Per Manufacture Instructions & Complete All As Directed. 79 M&L For 4Mm Thick High Pressure Steam Cured Non Asbestos Fiber Cement Design Board Of Size 600Mm X 600Mm Fixing In Ceiling Complete All As Specified And Diredted.Note : ( I ) Aluminium Snap Grid, And False Ceiling Board Material Shall Be Verified By Ge Before Incorporation In The Work. ( Ii ) Paid Vr. Shall Be Verified Of Genuineness. The Payment Will Be Released After Complying Of Above Points. 80 M&L For Coloured Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectengular ) Area Of Each Tile Exceeding 0.18 Sqm But Not Exc 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurryand Pointed In White Or Coloured Cement To Match To Floor, Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cementy Mortar 1:6 Etc Complete All As Specified And Directed. 81 M&L For Coloured Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tiles Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm In Skirting / Dado Etc. Set And Jointed In Neat Cement Slurry And Pointed In Colour Cement To Match To Floor, Over And Incl 10Mm Thick Rendering On Wall Or Conc Surfaces In Cement Mortar 1:4 , Complete All As Specified And As Directed. 82 M&L Forhardcore Of Gauge N Exc. 63 Mm Of Broken Bricks, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed. 83 M&L For 75Mm Thick Pcc1:4:8, Type D-2, Using 40Mm Graded Agg ) As In Sub-Floors, Floors And Pavings Etc All As Specified And Directed. 84 M & L Chequered Cement Concrete Tiles 30Cm X 30Cm X 25Mm Thick, Set, Jointed And Pointed In Near Cement Slurryin Floors Over 15Mm Cm ( 1:6 ) Thick Screed Bedding Specified And Directed By Engr-In-Charge. 85 M&L For Appying Two Coat Of Oil Bound Distemper With Roller Including Prepration Of New Wall Surfaces Complete All As Specified And As Directed. 86 M&L For Applying Two Coat Of Cement Base Paint Including Preparation On New Plaster Surfaces Of External Surface Complete All As Specified And As Directed. 87 M&L For A Coat Of Jk / Birla Wall Care Putty 1Mm Thick Including Preparation Of Surface Complete All As Specified And As Directed. 88 S&F Sheet Glass 4.8Mm To 5Mm Thick, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And As Directed. 89 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows, Ventilators Using Section Size Minimum 100Mmx44mmx1.60Mm Thickwith One Or More Rebates Including Joining Cleat For Fixing Etc. Fixed In Position By Means Of Steel Screws And Patent Rawl Plugs / Bolts / Hold Fasts Of Suitable Size Complete All As Specified And Directed. 90 S&F Powder Coated Aluminium Sliding Windows With Fly Proof Shutters Having Top Rail Of Section 41Mmx20mmx1.6Mm Thick, Bottom Rail Of Section 41X20x1.6Mm Thick , Vertical Style Of Section 38X20x1.6Mm Thick Including Necessery Jointing Cleats , Glazing Clips, Rubber Packing , Snap Beading, Screws Handle And Locking System Etc, Fitted Including Usingg Standard Aluminium Section Including Necessery Fittings And Fixtures Complete All As Specified And Directed. 91 S&F For 125 Mm X 60 Mm Size Pressed Steel Frames For Door With One Or More Rebates Including Necessary Fixing Lugs, Hinge Lock Strike Plate Ect Including One Shop Coat Of Red Oxide Primer Including Cutting Holes And Making Good In Pcc 1:2:4Type B1 Using 20Mm Graded Stone Aggregate Complete All As Specified And As Directed.Note :- 10Mm Deformed Bar Shall Be Provided In Bottom & Pcc Will Be Provided In Hollowframe In Same Rate. 92 S&F Locally Made 30 Mm Thick Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Etc Complete All As Specified And As Directed. 93 S&F Locally Made30 Mm Thick Iind Class Hw Glazed & Skeleton Shutters Open Rebated And Prepared To Receive Glass Gauge Etc. ( Without Sash Bars ) Edges Of Framing Plain Chamfered Or Rounded Fitted With Cut & Mitered Beads For Security Glass / Gauge Etc. Size Of Members Of Shutter As Specified In Ssr Pt I Sec 8 Cl 8.20 ( A ) , Divided Into Squares With Plain Chamfered Rounded, Mitered And Rebated Sash Bars Etc Complete All As Specified And As Directed. 94 S&F Mild Steel Flat Iron Of Size 25X3 Mm As In Hold Fasts And Clamps & Similar Small Articles Confirming To Fe-410-W Or Fe-290 Complete All As Specified And As Directed By The Engr-In-Charge. 95 S&F Stainlesss Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Avg Width Of Aperture 1.40Mm Fixed With Stainless Steel Wire Staples Etc Complete All As Specified And As Directed. 96 S&F Fancy Type Stainless Steel Conduit Curtain Rod 32Mm Dia With Fancy Knob, Ends And Brackets Complete All As Specified And As Directed By The Engineer-In-Charge. 97 Dismantling Structural Steel Work Includingdoors, Gates But Excluding Framed Truss Etc Complete All As Specified And As Directed. 98 S&F Mild Steel Work As In Tubular Trusses Including Special Shaped Washer Etc Complete Using Erw Or Induction Butt Welded Tubes Conforming To Is-1161-1979 Grade St-240 With And Including One Shop Coat Of Zinc Chrominium Primer Paint Complete All As Specified And As Directed. 99 S And F For Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts Complete All As Specified And As Directed. 100 S And F Of Framed Work As In Doors Orgates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings ( Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides ) And Hanging; Also Fastening And Fixing Complete All As Specified And As Directed. 101 M&L For Brick Work With Subclass ‘B’ Bricks ( Old Size Bricks ) , Straight Or Curved On Plan Exc 6M Mean Radius, Built Inbuilt Cement Mortar 1:6 Complete All As Specified And As Directed. 102 M & L For Toothing And Bonding With Cement Mortar ( 1:6 ) For Openings ( To Foregoing Item ) , Including Cutting, Toothing And Properly Bonding Into Old Work, Also Facing, Jointing And Pointing To Match Existing Work, Complete All As Specified And As Directed. 103 M & L Preparing Surfaces Of Wall By Complete Removal Of Existing Treament Andapplying Two Coat Of Oil Emulsion Distemper On Walls Complete All As Specified And As Directed. 104 M&L Rendering 15Mm Thick In Cement Mortar 1:4 On Fair Faces Of Brick Or Concrete Surface Of Wall Rendering Is To Be Finished Even And Fair With Out Using Extra Cement With Water Proofing Compound Etc Complete All As Specified And As Directed. 105 M & L Forapplying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistant Priming Paint On External Surface Complete All As Specified And As Directed. 106 S&F Of Anodised Aluminium Snap Grid Frame Work For False Celing All As Specified And Hangers 6Mm Dia Gi Adjusting Level Fixed To Roof Slabs By Means Of Celling Cleats Made Out Of Gi Flat 40Mm X 3Mm Size 60Mm Long Complete All As Specified And As Directed. 107 M&L For For 4 Mm Thick High Pressure Steam Cured Non Asbestos Fiber Cement Designer Board Of Size 600Mm X 600Mm As In Ceiling Complete All As Specified And Directed With And Including Aluminium Anodised Snap Grid Frame Complete All As Specified And As Directed. 108 S&F, Powder Coated Anodised Aluminium Glazed Door Shutter , Single Leaf , Both Side Openable Fabricated Out Of Aluminium Section 1.60 Mm Thick With Top Rail And Stiles Of Size 83X44 Mm , Lock And Bottom Rail Of Size 100X44 Mm ( Two Panel ) Including 5.5 Mm Thick Tinted Glass Selected Quality Includingnecessary Joining Cleats, Glazing Clips, Ruber Neoprene Packing, Aluminium Cast Handles ( Disc Type ) 2 Nos , Hinges 100 Mm Long Type B-21 -3 Nos, Aluminium Anodised Tower Bolt 200 Mm Long -2 Nosin One Door Shutter , Anodised Aluminum Snap Beading And Steel Screws As Reuired Etc. Complete All As Specified. 109 S&Fpowder Coated Aluminium Window / Ventilator Glazed Shutter With Glazing Bar , Single Paneletc Completefixed Type With Section Having Weight N Less Than0.55 Kg / Rm And Glazing With 5 Mm Thick Figured Glass Includingjointing Cleats, Glazing Clips, Suitablerubber Packing, Powder Coated Aluminium Anodised Snap Beading, Screws Etc Complete All As Specified And Directed. Note- The Cost Of Tintedglass Shall Deemed To Be Included In Unit Rate. 110 S& F Anodised Aluminium Grill Deco Grill Fabricated Out Of Flat Aluminium Section Of Size 8 Mm X 5 Mm Thick Made To Shape As Directed ( Design First Got Approved From The Ge In Writing Before Ordering For Bulk Fabrication ) And Fixed On Aluminium Window Frame ( Refer Item Above ) With Suitable Arrangement As Per Site Requiements Etc Complete And As Direceted . Note : Cost Of Items Required For Fixing Grill To Window Frame Deemed To Be Included In Unit Rate Quoted By The Tenderer . 111 M & L For Aluminium ( Die Cast ) Body Door Closer Hydraulically Regulated, Designation No. 1Universal Type, Suitable For Door Shutters Up To 700 Mm In Width And Of Weight Not More Than 35 Kg And Fixed To Door Complete All As Specified And As Directed. 112 S&F, 150Mm Floor Door Stopper Aluminium Alloy Body Complete All As Specified And Directed. 113 M&L Glazed Ceramic Colour Tiles 300Mmx600mm X7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement On Vertical Surfaces Such As Skirting / Dado Including 10 Mm Thick Rendering / Screeding In Cement Mortar 1:3, Complete All As Specified And Directed 114 M And L For Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Cement And Pigments Complete All As Specified And As Directed.. 115 M And L For Screed Bed Or Bedding Layer Or Mortar 15Mm Layer Of Mortar 15Mm Thick For Laying Floor Finishes With Cm ( 1:6 ) Complete All As Specified And As Directed. 116 M And L For Moorum / Red Bajri Filling In Floors Or Pavings, Laid In Layers N Exc. 15 Cm Thick Spread, Levelled And Rammed Including Watering Complete All As Specified And As Directed. 117 M And L For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete Including Screed Bed Or Bedding Layer Or Mortar 15Mm Layer Of Mortar 15Mm Thick For Laying Floor Finishes With Cm ( 1:6 ) Complete All As Specified And As Directed. 118 M & L For Kota Stone Slab 15-18 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete Including 15 Thick Rendering Cement Mortar 1:6 Complete All As Specified And As Directed. 119 M And L For Providing, Precast Cement Concrete Type B1- ( 1:2:4 ) Using 20 Mm Graded Aggt In Window Or Door Lintels, Bressummers, Steps, Quoin Blocks ( For Use With Masonry ) , String Courses, Copings, Kneelers, Apex Stones, Pier Caps, Columns, Posts, Boundary Pillars, Bed Plates, Pintle Blocks, Anchorage Blocks, Bonders ( For Stone Walling ) , Corbels, Brackets, Etc. ( Of Any Section Indicated ) , With Plain Fair Faces, Including Chamfers Weatherings, Throating Etc. And Setting In Mortar Complete With Joints To Match And Set In Cm ( 1:4 ) And All Other As Directed By Engineer In Charge. 120 Taking Downcarefully Unserviceable Aluminium Point Wiring ( Light, Fan, Socket Or Power ) Complete With Fitting Such As Switches, Ceiling Roses, Lamp Holders, Sockets, Fan Regulators, Wooden Terminal Box Plastic Laminated Sheet Cover From Tw Battens Including Tw Batten Or Drawing From Existing Conduit Removing Including Tw Batten All As Specified And As Directed By Engr-In-Charge. 121 Taking Down Carefullyexisting Wooden Board , Main Switch, Mcb Db Boxes With Mcbs, Sheet Metal Boxes, Cut Out, Etc Of Any Size Anycapacity Fromboards Completeall As Specified And As Directed. 122 Taking Down Carefully Sub Main Wiring / Service Connection Twin Core From Wall / Lt Pole Of Any Size Of Aluminum With Wooden Batten And Or Through Rigid Conduit Including Gi Wire And Making Good The Disturbed Surfaces Of Walls, Roofs, Floors Etc Complete All As Specified And As Directed. 123 M & L For Concealed Point Wiring For One Light Point Controlled By One Switch Complete With Pvc Insulated And Unsheathed Flame Retardant Low Smoke And Halogen ( Frlsh ) Cable Of 1.5 Sqmm ( Nominal Area ) With Stranded Copper Conductor Single Core 1100 Volts Grade In And Including Rigid Pvc Conduit Not Less Than 20 Mm Dia, Clip, With Ms Terminal Boxes ( Not Less Than 1.6Mm Thick ) And Painted With One Coat Of Red Oxide Primer All Around And Two Coats Of Black Bituminous Paint From Out Side And Two Coat Of Aluminum Paint From In Side Including Common Earth Dollywith3 Mm Thick Plastic Laminated Sheet Top Cover Of Approved Make And Colour Including 1.5 Sqmm Green Stranded Copper Conductor As Continuous Earth Wire With Lugs Complete Including Cutting Necessary Chases On Wall / Ceiling Surfaces For Drawing Of Conduit & Cables As Required And Making Good Disturbed Surfaces Of Walls With Cm 1:3:6 And Matching With The Existing Surfaces Including Colour Washing All As Specified And As Directed . 124 Description Same As Per Item No 124 Above But One Fan Point Controlled By One Switch & Regulator. 125 Description Same As Per Item No 124 Above But One 3 / 5 Pin5 Amp Socket Outlet Point Controlled By One Switch On Same Board. 126 Description Same As Per Item No 124 Above But One 3 / 5 Pin5 Amp Socket Outlet Point Controlled By One Switch On Independent Board. 127 Description All As Per Item No 124 Above But Using 2.5 Sqmm Single Core Multi Stranded Copper Conductor Pvc Insulated And Unsheathed Flame Retardant Low Smoke And Halogen ( Frlsh ) Cable For 3 / 6 Pin 15 Amp Socket Outlet Controlled By One Switch On Independent Board With 1.5 Sqmm Green Stranded Copper Conductor As Continuous Earth Wire With Lugs Complete All As Specified And As Directed. 128 S&F Switch Pianoflush Button Type 5 Amp Single Pole One Waycomplete All As Specified And Asdirected. 129 S&F Socket Outlet 2In1, 3 Pin, 5 Amp Flush Type Complete All As Specified And Asdirected. 130 S&F Switch Piano Flush Button Type 15 Amp Single Pole One Way Complete All As Specified And Asdirected. 131 S&F Socket Outlet2in1, 3 Pin, 5 Amp And 15 Amp Flush Type Complete All As Specified And Asdirected. 132 S&F Ceiling Rose, Surface Bakelite 63 X50mm Three Terminals Completeall As Specified And Asdirected. 133 S & F Sheet Metal Enclosure Double Door Concealed Suitable For Distribution Board When Mcb To Be Used Having 100 Amp Rated Bus Bar Spn Db 8 Ways 240 Volts Complete All As Specified And As Directed. 134 S&F Mcb Single Pole And Neutral 40 / 63 Amp 240 V , 10Ka , C Series, Connected With Copper Lugs Complete All As Specified And As Directed. 135 S&F Rigid Non-Metallic Pvc Conduit Not Less Than 25Mm Dia ( External ) Isi Marked Concealed Including Cutting Necessary Chases On Wall / Ceiling Surfaces For Drawing Of Conduit Icces And All Fittings Such Astees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Locknuts, Saddles, Pipe Hooks Etc. Complete All As Specified And As Directed. 136 Supplying Andlayingun-Reinforced Precast Concretecablecover, Class Lv Type 1 Flat Size 250X150x40mm Peak, Laid Perpendicular To The Axis Of Cable In Trenches Complete All As Specified And As Directed. 137 Excavation In Trenches Not Exc 1.5M Wide And N. Exc 1.5M In Depth For Foundation Etc Not Exc 10 Sqm On Plan And Not Exc 1.5M In Depth And Getting Out In Any Type Of Soil Complete All As Specified And As Directed. 138 M&L Returning Filling In Including Spreading Levelling, Watering And Well Ramming In Layers N.Exc. 25Mm In Any Type Of Soil Complete All As Specified And As Directed. 139 Removing Excavated At A Level N.Exc 50M And Deposited Where Directed At A Level N Exc 1.5M Above The Starting Point Complete All As Specified And As Directed. 140 S&F Ceiling Fan Complete With Blades, Down Rods, Electronic Regulator And Accessories, 230V, 1200Mm Sweep. Minimum Air Delivery 210Cfm With Service Value 6.00Bee. Five Star Rated With Squirrel Cage Induction Motor, Copper Binding Complete All As Specified And As Directed. 141 Supply And Lay River Bed Sand Free From Sharp Materialsa For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above The Cable All As Specified And Directed . 142 Supply And Laying Gi Pipe 50Mm Bore Light Grade In Trenches, Under Floors, Roads, Along Poles For Protection Of Cables, Including Sealing Ends Complete All As Specified And As Directed. 143 S&F Mcb Single Pole 6 To 32Amps 240 V, 10Ka, C Series, Connected With Copper Lugs Complete All As Specified And As Directed. 144 S&F Mccb 4 Pole, 415V, Ac , 3 Phase, 50 Hz, Breaking Capacity 16 Ka With Fixed Thermal And Fixed Magnetic Setting Of Capacity 125 Amps C Series Complete All As Specified And As Directed. 145 S & F Lamp Holder, Pvc / Urea Type With Back Plate Suitable For Batten Fittingscomplete All As Specified As Directed 146 S & F Delux Fan Regulator Electronic Rotary, Step Type 240 Volt50 Hz, Complete All As Specified As Directed. 147 S&F Led Security / Street Light Fittings1x35w Led 5700K Energy Saving And Envoiremental Frendly Long Life Versatile Pressure Die Cast Aluminium Housing With Acrylic Cover As Diffuser With Ip 66 Protection And Impact Resistance Of Ik 07 Luminaire With High Power Led As Light Siurce And Electronic Driver Suitable For Pole Dia 35Mm Including 35Mm Dia Light Grade Tube Bracket, Bend To Shape 1.80M Long With Two Numbers Clamp Of Size 50Mmx6mm With Nuts, Bolts, Washers Etc Including Connection With 1.5Sqmm Two Single Core Pvc Insulated And Pvc Sheathed Cable Stranded Copper Conductor Upto Ceiling Rose And Fixing On Wall / Pole Complete As Ditrected By Engineer In Charge. Make: Bajaj Cat Part No Brlep20wledwh Or Equivalent Make As Specified In Appendix B To Particular Specification. 148 S & F 9W / 10W Led Retrofit Lamp B-22 Holder Base With Polycorbonate Body And Aluminium Heat Sink Complete All As Specified As Directed. Make C&S Cat No Lthpledlamp7w / B22 Or Equivalent Make As Specified In AppndxB To Ps . 149 M&L For Sub Main Wiring With 2 Run Of Single Core Pvc Insulated And Pvc Unsheathed, Multistranded Copper Condutor Of Nominal Area 6 Sqmm Frls, 1100 Volts Gradecable Drawn Into Conduit ( Existing / New ) Including All Fittings And One Run Of Pvc Insulated And Pvc Unsheathed, Multistranded Copper Conductor Of Nominal Area 6 Sqmm Frls 1100 Volts Grade Cable Continuous Earth Wire Of Green Colour Code Complete All As Specified And As Directednote:- ( A ) Two Runs Of6 Sqmm Cable And One Run Of 6 Sqmm Cable As Earth Leadwith Conduit Shall Be Measured As One Unit Length For Payment. ( B ) New Conduit And Conduit Accossories Shall Be Measured Separately. 150 Supply And Fixing In Repair 20W Led 6000K Decorative Ultra Slim Linear Led Fitting Fixture With Extruded Polycarbonate , Environmental Friendly , Energy Efficentinterated Driver And 22Watts Lamp Fitted Including Wiring Upto And Terminal Into Ceiling Rose Complete All As Specified And Directed By Engr-In- Charge. 151 Supply, Laying Connecting And Testingof Cable Xlpe Insulated, Screened, Pvc Bedded Galvanized Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) 1100 V Grade With Multi Stranded Aluminium Conductor Of Size 25 Sqmm 4 Core As Per Is 7092 Pt-I Completeall As Specified And As Directed. 152 Supply, Laying Connecting And Testingof Cable Xlpe Insulated, Screened, Pvc Bedded Galvanized Steel Strip Or Wire Armoured Electric Power Cable ( Heavy Duty ) 1100 V Grade With Multi Stranded Aluminium Conductor Of Size 16 Sqmm 4 Core As Per Is 7092 Pt-I Completeall As Specified And As Directed. 153 S&F Tpn Db-Dpx 125 Mccb Dbs 4 Way Single Door With Provision For Dpx 125 Mccb And As Incomer And Sp / Tp Mcbs As Outgoing Nos Of Modules Dpx 125+12, Including 125 Amp Mccbcomplete All As Specified And Directed. 154 S&F Exhaust Fan, Copper Binding, Steel Body Ac, Single Phase, 230V Of Size 300Mm Sweep, 1400Rpm With Louvre Complete Including All Arrangement Of Making Holes On Wall, Making Good And Finishing Of Disturbed Surfaces Matching With The Existing Surfaces, Necessry Fixing Arrangement Such As Fastrener, Bolts, Nuts, Washers Etc Of Appropriate Sizecomplete All As Specified And As Directed. 155 S&F Sheet Metal Enclosurewith Two Pin Socket, Chain Plug Cover With One Mcb Sp Of 20 / 32 Amp Capacity With Alignment 10Ka B Series Complete All As Specified And As Directed. 156 S&F In Replacement Of 36W Led Of Size 2Feetx2 Feet 6500K Rescessed Mounting Luminaire Glare Free Suitable For Armstrong / Grid Ceiling In Ms / Crca Housing With High Brightness Leds Including Wiring Upto And Terminating Into Existing Ceiling Rose Complete All As Specified And As Directed. 157 M&L For Earthing Completewith Galvanisedsteelearth Plateelectrode Of Size 600 Mm X 600 Mm X 6 Mm Thickweithing Not Less Than 17.5 Kg Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Mtr Below Ground Level, Connected To Galvanized Earth Lead Wire 4.00 Mm Dia By Means Of Bolts Nuts Check Nuts & Washers Of Galvanized Iron Or Steel , Procteded By Gi Pipe 15 Mm Bore ( Light Grade ) And Watering Pipe 20 Mm Bore Gi Pipe ( Light Grade ) Andchamber Of Pcc 1:4:8 Type D2 Using 40 Mm Graded Stone Aggregate And Coping Shall Be In Pcc 1:3:6 Type C1 Using 20Mm Graded Stone Agg.50 Mm Thick Cover Of Rcc 1:2:4 Type B1 Using 20 Mm Graded Stone Agg. Reinforced With 8 Mm Dia Ms Tor Bar @ 80 Mm C / C Both Ways Including Excvation And Earth Work And Removal Of Surplus Soil Complete All As Shown In Electrical Plate No 3 Of Ssr Pt 1, 2009 With Charcoal Dust And Saltcomplete And Earth Leadconnected To Earthing Test Point ( Up To Main Switches, Dbs ) Completeall As Specified &Testing On Completion. Note:- ( I ) Item Includes The Cost Of 7.5 Mtr Length Gi Pipe For Protection For Gi Earth Wire. ( Ii ) Item Rates Includes The Cost Of 7.5 Mtr Earth Lead Gi Earth Wire. ( Iii ) Pcc Pit Shall Be Provided At Least 500Mm Away From The Pit And Not On The Earth Pit Itself And The Extra Costof Additional Length Of Watering Pipe, Bends, Elbow Etc Shall Be Deemed Included In The Unit Rate.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	18-Dec-2023	Amendment	Other	02-01-2024
2	02-Jan-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	09-01-2024

INR 500 /-

INR 96600.0 /-

INR 48.30 Lakhs /-

Name of Work:PEROVN OF CERTAIN SPECIAL REPAIR WORK AT AGE B/R-IIAND AGE E/M UNDERGE BABIBA CANTT.

Sl. No.	Item Description
1	Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.
2	M&L renderig 15mm thick in cementmortar 1:6 overfair faces ofbrick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.
3	M&L for 10 mm thick rendering in cement mortar 1:3 on concrete/brick surfaces finish even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately assupply only
4	Supply only integral water proofing compound complete all as specified and as directed.
5	M & L for preparing of new surfaces andapplying two coat of white wash on walls complete all as specified and as directed.
6	M & L for preparing surfaces of wall by complete removal of existing treament andapplying two coat of white wash on walls complete all as specified and as directed.
7	M & L for complete removal of existing treament andapplying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.
8	Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed.
9	Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but not exe 4.0 Sqm each etc complete all as specified and as directed.
10	S & F steel window withZ sections, side hung shutters including Box type hinges with steel handle peg stay, glazing bar, dovetailed or welded for recieving glass after and including taking out unserviceable steel window complete all as specified and as directed.
11	S & F Ditto as per item no-10 , but without glazing barsw complete.
12	S & F 3 mm thisk sheet glass, ordinary quality and glazing with oil putty in squareb n. exc 0.50 sqm in each plane complete all as specified and as directed.
13	M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed.
14	M&L for two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
15	S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge.
16	S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.
17	S and F of Pressed steel frames for doors of size(165x60)mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed all other as directed by engineer in chagre
18	S&F30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete.
19	Supply and fix 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.
20	S&F 100 mmbutt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.
21	S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed..
22	S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed.
23	Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.
24	S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
25	S&F,150mm floor door stopper aluminium alloy body complete all as specified and directed.
26	M&L fortwo coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed
27	Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed
28	Sunken waterproofing Treatment by SmartCare Or equivalentin following steps :-(i). Surface Preparation: Minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare SRP ii). Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare SRP (iii). Supplying & grouting the gaps around the pipe / inserts with SmartCare General Purpose Grout, a non-shrink cementitious waterproof grout. The “Nahani” trap, etc is to be fitted securely in the same manner & the gaps around it to be grouted with non-shrink Grout or equivalent (iv) Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane and all as specified and as directed. Make- Aisan paint/ fosroc/Pidilite
29	M & L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as inunder floor complete all as specified and as directed.
30	M&L for 75mm cement concrete 1:3:6type C1 ,using 20 mm graded crushed stone aggregatesas in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25, surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.
31	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
32	M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in sub base of floor complete all as specified and as directed
33	M&L non skid ceramic colour tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed
34	M&L glazed ceramic colour tiles 300mmx600mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed
35	Taking down old existing unserviceable HDPE water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000ltrs complete as directed
36	S&F 1000 ltr capacityrotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etccomplete all as specified in SSR Part -I 2009 complete all as specified and as directed.
37	S&F in repair of 25mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimumweight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms and all as specified and as directed.
38	S&F in repair 20mm Gun metal globe orgate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed
39	S&F in repair 25 mm Gun metal globe orgate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed
40	Taking down or up steel tubing andconnection including cleaning for refixing or removal to store15 mm dia complete all as specified and as directed.
41	Taking down or up steel tubing andconnection including cleaning for refixing or removal to store 20 mm dia complete all as specified and as directed.
42	Taking down or up steel tubing andconnection including cleaning for refixing or removal to store 25 mm dia complete all as specified and as directed.
43	Supply and fixing, 15mm dia bore jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes , the rate also include cutting through walls floors etc complete all as specified and as directed.
44	Supply and fixing, 20mm dia bore jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes , the rate also include cutting through walls floors etccomplete all as specified and as directed.
45	Supply and fixing, 25mm dia bore jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbowssockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes , the rate also include cutting through walls floors etc complete all as specified and as directed.
46	S&F in repair 15 mm bore stop valve (angle cock two in one) cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.
47	S&Fin repair 15mm bore bib taps cast copper alloy fancy type chromium plated screwed for iron pipe or for brass ferrule complete all as specified and as directed
48	S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
49	S&F vitreous china squatting pan "ORISSA PATTERN " size 580mmx440mm "white with integral foot rest (excluding flushing cistern and flush pipe ) with "P" or "S" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
50	S&F in repair vitreous china wash handbasin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
51	S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)
52	S&F 15mm dia pillar taps cast copper alloy with capstan heads, cromium platedscrewed down high pressure with or without letteredHotor Cold with long screw shanks abd fly -nuts screwed for iron pipe and fixed complete all as specified and as directed.
53	S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointingcomplete all as specified and directed
54	Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and as directed.
55	S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches complete all as specified and as directed.
56	S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and as directed.
57	S&FPVC (SWR) bends 110 mm boreofany radius complete all as specified and as directed.
58	S&F PVC (SWR) junction single, (single T) equal or unequal 110 mm bore complete all as specified and as directed.
59	S&F PVC (SWR) vent cowl 110 mm complete all as specified and as directed.
60	S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed
61	S and F of Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.
62	S & F in repair of Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)
63	M & L for Cement concrete1:5:10 type D-2 (using 40mm graded stone aggregate)as in under floor using brick bats and as directed by engineer in charge.
64	Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete.
65	M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed.
66	M and L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface With or with out reinforceout complete all as specified and directed.
67	S&F mild steel TMT bars 10mm dia and over as in reinforcement, cut to length and bent to shape required incl bending, cranking, spirally hooping for columns, hooking ends and binding with and incl mild steel annealed wire not less than 0.9mm dia or securing with clips complete all as specified and directed.
68	Ditto all as per item No 68 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
69	Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
70	Dismantling of plain or corrugated steel sheeting, any guage, thickness includidng nainital or similar pattern in roof covering complete all as specified and directed.
71	S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw as specified complete all as specified and directed.
72	S & F Pre- painted galvalume aluminum zink coating GI based plain steel0.50mm thickand AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw as specified
73	Dismantling timber scantling unframed work 40 sq. cm and over in section in any position complete all as specified and as directed.
74	S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 all as specified and directed.
75	M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165
76	M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, over 10cm in width or girth,not otherwise described complete all as specified and directed.
77	Dismantling walland ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed.
78	M&L for aluminium anodised snap grid frame work of the following (a)Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b)Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c)Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.Irodn.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as directed.
79	M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm fixing in ceiling complete all as specified and diredted. Note :(i)Aluminium snap grid, and false ceiling board material shall be verified by GE before incorporation in the work. (ii) Paid Vr. shall be verified of genuineness. The payment will be released after complying of above points.
80	M&L for coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and directed.
81	M&L for coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.
82	M&L forHardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
83	M&L for 75mm thick PCC1:4:8, type D-2, using 40mm graded agg) as in sub-floors, floors and pavings etc all as specified and directed.
84	M & L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurryin floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge.
85	M&L for appying two coat of oil bound distemper with roller including prepration of new wall surfaces complete all as specified and as directed.
86	M&L for applying two coat of cement base paint including preparation on new plaster surfaces of external surface complete all as specified and as directed.
87	M&L for a coat of JK/Birla wall care putty 1mm thick including preparation of surface complete all as specified and as directed.
88	S&F Sheet glass 4.8mm to 5mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
89	S&F powder coated anodised aluminium frame for doors, windows, ventilators using section size minimum 100mmx44mmx1.60mm thickwith one or more rebates including joining cleat for fixing etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.
90	S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed.
91	S&F for 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20mm graded stone aggregate complete all as specified and as directed. Note :- 10mm deformed bar shall be provided in bottom & PCC will be provided in hollowframe in same rate.
92	S&F Locally made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.
93	S&F Locally made30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
94	S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge.
95	S&F Stainlesss steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with stainless steel wire staples etc complete all as specified and as directed.
96	S&F fancy type Stainless steel conduit curtain rod 32mm dia with fancy knob, ends and brackets complete all as specified and as directed by the Engineer-in-charge.
97	Dismantling structural steel work includingdoors, gates but excluding framed truss etc complete all as specified and as directed.
98	S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.
99	S and F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.
100	S and F of framed work as in doors orgates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
101	M&L for Brick work with subclass ‘B’ bricks (old size bricks), straight or curved on plan exc 6m mean radius, built inbuilt cement mortar 1:6 complete all as specified and as directed.
102	M & L for toothing and bonding with cement mortar (1:6) for openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.
103	M & L preparing surfaces of wall by complete removal of existing treament andapplying two coat of oil emulsion distemper on walls complete all as specified and as directed.
104	M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall rendering is to be finished even and fair with out using extra cement with water proofing compound etc complete all as specified and as directed.
105	M & L forapplying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.
106	S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complete all as specified and as directed.
107	M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.
108	S&F, Powder coated Anodised aluminium Glazed door shutter , single leaf , both side openable fabricated out of aluminium section 1.60 mm thick with top rail and stiles of size 83x44 mm ,lock and bottom rail of size 100x44 mm (two panel ) including 5.5 mm thick tinted glass selected quality includingnecessary joining cleats, glazing clips, ruber neoprene packing, aluminium cast handles ( Disc type ) 2 Nos ,hinges 100 mm long type B-21 -3 Nos, aluminium anodised tower bolt 200 mm long -2 Nosin one door shutter , anodised aluminum snap beading and steel screws as reuired etc. complete all as specified.
109	S&FPowder coated aluminium window /ventilator glazed shutter with glazing bar , single paneletc completefixed type with section having weight n less than0.55 kg/RM and glazing with 5 mm thick figured glass includingjointing cleats, glazing clips, suitablerubber packing, powder coated aluminium anodised snap beading, screws etc complete all as specified and directed. Note- The cost of tintedglass shall deemed to be included in unit rate.
110	S& F anodised aluminium grill DECO GRILL fabricated out of flat aluminium section of size 8 mm x 5 mm thick made to shape as directed ( Design first got approved from the GE in writing before ordering for bulk fabrication ) and fixed on aluminium window frame ( refer item above ) with suitable arrangement as per site requiements etc complete and as direceted . Note : Cost of items required for fixing grill to window frame deemed to be included in unit rate quoted by the tenderer .
111	M & L for Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 1universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed to door complete all as specified and as directed.
112	S&F,150mm floor door stopper aluminium alloy body complete all as specified and directed.
113	M&L glazed ceramic colour tiles 300mmx600mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed
114	M and L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and pigments complete all as specified and as directed..
115	M and L for Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.
116	M and L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.
117	M and L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.
118	M & L for Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 thick Rendering cement mortar 1:6 complete all as specified and as directed.
119	M and L for Providing, precast cement concrete type B1- (1:2:4) using 20 mm graded aggt in window or door lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match and set in CM (1:4) and all other as directed by engineer in charge.
120	Taking downcarefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
121	Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed.
122	Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
123	M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
124	Description same as per item No 124 above but one fan point controlled by one switch & regulator.
125	Description same as per item No 124 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board.
126	Description same as per item No 124 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board.
127	Description all as per item No 124 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
128	S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected.
129	S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected.
130	S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected.
131	S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected.
132	S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected.
133	S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar SPN DB 8 ways 240 volts complete all as specified and as directed.
134	S&F MCB single pole and neutral 40/63 Amp 240 V ,10KA , "C" series, connected with copper lugs complete all as specified and as directed.
135	S&F Rigid non-metallic PVC conduit not less than 25mm dia (external) ISI marked concealed including cutting necessary chases on wall/ceiling surfaces for drawing of conduit icces and all fittings such astees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts,saddles, pipe hooks etc. complete all as specified and as directed.
136	Supplying andlayingun-reinforced precast concretecablecover, class LV type 1 flat size 250x150x40mm peak,laid perpendicular to the axis of cable in trenches complete all as specified and as directed.
137	Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth for foundation etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.
138	M&L returning filling in including spreading levelling, watering and well ramming in layers n.exc. 25mm in any type of soil complete all as specified and as directed.
139	Removing excavated at a level n.exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
140	S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Minimum air delivery 210CFM with service value 6.00BEE. Five star rated with squirrel cage induction motor, copper binding complete all as specified and as directed.
141	Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .
142	Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.
143	S&F MCB single pole 6 to 32Amps 240 V,10KA, "C" series, connected with copper lugs complete all as specified and as directed.
144	S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 125 Amps "C" series complete all as specified and as directed.
145	S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed
146	S & F delux Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed.
147	S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
148	S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx"B" to PS .
149	M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts gradecable drawn into conduit (Existing / new)including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
150	Supply and fixing in repair 20W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
151	Supply,laying connecting and testingof cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 25 sqmm 4 core as per IS 7092 Pt-I completeall as specified and as directed.
152	Supply,laying connecting and testingof cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I completeall as specified and as directed.
153	S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed.
154	S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 300mm sweep, 1400RPM with louvre complete including all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessry fixing arrangement such as fastrener, bolts, nuts, washers etc of appropriate sizecomplete all as specified and as directed.
155	S&F sheet metal enclosurewith two pin socket, chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10KA "B" series complete all as specified and as directed.
156	S&F in replacement of 36W LED of size 2feetx2 feet 6500K rescessed mounting luminaire glare free suitable for armstrong/grid ceiling in MS/CRCA housing with high brightness LEDs including wiring upto and terminating into existing ceiling rose complete all as specified and as directed.
157	M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.