Tender For Repair To Umang Sub Area Main Gate And Allied Works At Nagpur Under Ge Kamptee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Jan 2024
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kamptee → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Umang Sub Area Main Gate And Allied Works At Nagpur Under Ge Kamptee
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brick /block masonry/stone masonary, built in cement mortar includingall quoins, arches, pillars, etc, but excluding ashlalfacings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete slab etc in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | Dismantling structural steel work including doors, gates but excluding frame truss ext complete all as specified and as directed. |
| 4 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.50 m deep and getting out in Hard soil complete all as specified and as directed. |
| 5 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of rubbish/debris MD land complete all as specified and directed. |
| 6 | Material and labour for Cement concrete type D2 (1:4:8) in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Complete all as specified and as directed. |
| 8 | Material and labour for flat and curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and as directed. |
| 9 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions. Rough finished Add for fairsurfaces of finished Square, Circular rectangular on plan or polygonalconcrete Complete all as specified and as directed. |
| 10 | Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 11 | Material and labour for Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia Complete all as specified and as directed. |
| 12 | Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 13 | Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 14 | Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 15 | Material and labour for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 16 | Material and labour for rendering 15mm thick in cement plaster in cement mortar 1:6 , finished complete all as directed. |
| 17 | Supply and fix 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed |
| 18 | Material and labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturer\"s instruction and as directed. |
| 19 | Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 20 | Material and labour for glazed Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and as directedNote: Sand will be measured paid for seperately under respective item supplied only. |
| 21 | Supply only river bed fine sand for screed bed for paving flooring complete all as specified and as directed. |
| 22 | Returning, filling in, including spreding, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified anddirected. |
| 23 | Removing excavated material exceeding 250 m but not exceeding 500 m and depositing where directed Complete all as specified and as directed. |
| 24 | Material and labour for Framed work for ornamental and intricate design such as Gate, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specifiedand directed. |
| 25 | Material and labour for preparation New steel and iron surface not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of primer complete all asspecified and directed. |
| 26 | Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed. |
| 27 | Supply and fixPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all a specified and directed. |
| 28 | Supply and fixPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all a specified and directed.. |
| 29 | Note : The amount against Schedule of Credit on Page No. 33 shall be deducted from the total amountquoted against Sch \"A\"while deriving lum Sum for Acceptance. |
AI Tender Summary
Tender Timeline
Dec 28, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 04, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender