Tender For Comprehensive Maintenance To Tech Area (Southern Side) At Af Station Sirsa, sirsa-Haryana

Tender For Comprehensive Maintenance To Tech Area ( Southern Side ) At Af Station Sirsa ; 1 Demolition Cement Concrete ( Un-Reinforced ) Of Any Description In Ground Floors, Pavings, Etc. Not Exc. 150Mm Thickness ( Above Or Below Ground Level ) And Removing Debris, Etc. To Outside Md / Af Land, Complete All As Specified And As Directed. 2 M&L Cement Concrete 1:4:8 ( 40Mm Graded Stone Aggregate ) 100Mm Thick In Sub-Bases, Complete All As Specified And As Directed. 3 M&L Cement Concrete 1:2:4 ( 20Mm Graded Stone Aggregate ) 100Mm Thick As In Flooring, Finished Even And Fair Complete All As Specified And As Directed. 4 M&L Cement Concrete 1:3:6 ( 40Mm Graded Stone Aggregate ) 75Mm Thick In Plinth Protectionfinishing Cement Concrete Surfaces Even And Smmoth Without Using Extra Cement, Complete All As Specified And As Directed. 5 M&L For Machine Pressed Precast Conctete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006 Of 60 Mm Thickness, M-35 Grade, With Grey Cement & No Pigment, Incl Taking Out And Removing Debris From Outside Md Land, Complete All As Specified. ( Note: Sand Cushioning Shall Be Measured And Paid Seperately ) 6 M&Lfor Sand Filling Under Floors Or In Foundation Incl Watering And Consolidation Complete All As Specified And Directed. 7 M&L Providing, Cement Concrete 1:2:4 Type B1 20Mm Graded Aggregate As In Coping Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 8 Dismantling Of Cgi / Asbestos Cement ( Corrugated, Semi Corrugated, Plain, Etc. ) Sheets In Roof / Wall Coverings, Complete All As Specified And As Directed. 9 S&F 0.50 Mm Thick Tct ( Total Coated Thickness ) Pre-Coloured Galvalume Sheets With Minimum Base Metal Thickness Of 0.45 Mm, Single Skin High Rib / Multi Rib Profile Galvalume Sheetinghaving 1000-1020 Mm Width And 28-30 Mm High Crest @ Maximum 250-255 Mm Pitch ( Centre ) With Sheets Manufactured Out Of 0.50 Mm This Tct ( Total Coated Thickness ) High Tensile Galvalume Sheets Having Tensile Strength 550 Mpa With 18-20 Micron Top Coat Over 5 Micron Primer And 8-10 Micron Alkyld Backer Zinc Aluminium Alloy Az-150, Sheets Having A Dip Metallic Zinc ( 43.5%0 Aluminium ( 55% ) & Silicon ( 1.5% ) With Total Mass Coating Of 150 Gms / Sqm On Both Sides, Having Wide Pans With Minimum 3 Smallstiffening Ribs For Effective Water Shedding And Special Male / Female Ends With Full Return Legs On Laps For Purlin Support And Fixed As Per Existing Profile Of Roof Completeall As Specified And Directed. 10 All As Per Item No. 09 Above But 0.50 Mm Thick Colouredplain Galvalume Sheet As In Ridge / Valley Gutter Of Roof. 11 Dismantling Structural Steel Or Mild Steel Work Of Any Discription Not Otherwise Provided For, Complete All As Specified. 12 M&L Mild Steel Work In Tubular Trusses Including Special Shaped Washers Etc Complete Using Erw Or Induction Butt Welded Tubes Conforming To Is-1161:2014 Grade St-240 Complete All As Specified And Directed. ( Note: Quoted Rates Shall Be Deemed To Include For Cutting To Dead Length Where Required, Notching, Drilling, Fitting, Riveting And / Or Welding Or Connecting With Bolts And Nuts ( Including Rivets Or Bolts And Nuts ) , Providing And Fitting Angle Cleats, Fish Plates, Gusset Plates Etc., Also For Wedging, Plumbing, Truing Up And Fixing Complete ) 13 Demolition Brick Work Built In Cement Mortar And In Any Position Including All Quoins, Arches And Pillars, Etc., Removal Of Debris Outside Af Land Complete All As Specified And As Directed. 14 M&L For Brick Work With Fly-Ashbricks ( Old Size Bricks ) , Straight Or Curved On Plan Exc. 6.0 Metre Mean Radius, Built In Cement Mortar 1:6, Complete All As Specified And As Directed. 15 M&L Brick Work Using Serviceable Bricks Obtained From Item No. 16 Here-In-Before Including Removing Old Mortar, Straight Or Curved On Plan Exc. 6.0 Metre Mean Radius, Built In Cement Mortar 1:6, Complete All As Specified And As Directed. 16 Taking Down Cement Plaster Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water And Removing Debris, Etc. To Outside Md / Af Land, Complete All As Specified And As Directed. 17 M&L Rendering 15Mm Thick In Cement Mortar 1:6 On Brick Walls / Concrete Surfaces, Plastered Surfaces Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 18 M&L For Rendering ( Ceiling ) 5.0Mm Thick In Cement Mortar 1:3 On Concrete Surfaces As In Ceiling, Etc., Plastered Surfaces Finished Even And Smooth, Without Using Extra Cement, Complete All As Specified And As Directed. 19 M & L For 15 Mm Thick Plastering In Two Layers, 10 Mm + 5 Mm In Cement Mortar 1:4, Top Layer Of 5 Mm Thickness Mixed With With Water Proofing Compound ( As Per ManufacturerS Instructions ) Onbrick / Stone Walls Or Concrete Surfaces Finished Even And Fair ( Upto Any Height ) For External Surfacescomplete All As Specified And Directed.Note : Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only. 20 Supply Only Liquid Water Proofing Compound, Conforming To Is And / Or As Approved, Complete All As Specified. 21 M&L For Rough Cast Plaster On Brick Walls Consisting Under Coat Of Cement And Sand Mortar 1:3 Not Less Than 10Mm Thick And While It Is Still In Plastic State The Rough Cast Mixture Consisting Of Crushed Stone Or Fine Gravel Mixed With Coarse Sand And Cement In The Ratio 1:1:1 Shall Be Applied And Finish Even, Complete All As Specified And As Directed. 22 M&L Preparing New Plastered Surfaces Of Walls By Applying Two Coats Of Weather Coat Exterior Emulsion Paint ( In Camuflage Pattern As Ordered ) With Approved Tint Over A Coat Of Primer ( As Per ManufacturerS Instructions ) , Complete All As Specified And As Directed. 23 M&L Preparing New Rough Cast Plastered Surfaces Of Walls By Applying Two Coats Of Weather Coat Exterior Emulsion Paint ( In Camouflage Pattern As Ordered ) With Approved Tint As Per ManufacturerS Instructions Over A Coat Of Primer, Complete All As Specified And As Directed. 24 M&L For Preparing New Plastered Surfaces Of Walls By Applying A Coat Of Wall Care Putty, 2 Mm Thick Including Rubbing Down With Sand Paper To Obtain A Smooth Finish Surface And Applying With Rollers Two Coats Of Acrylic Distemper ( As Approved ) Over A Coat Of Primer, Complete All As Specified And As Directed. 25 M&L For Preparing Newly Plastered Surfaces Of Ceiling And Applying Three Coats Of White Wash, Complete All As Specified And As Directed. 26 Dismantling Of Ceiling Grid Frame, Any Type Alongwith Ceiling Board Of Any Thickness Including Cover Fillets Complete All As Specified And Directed. 27 Dismantling Ofwallandceilingboards ( Fibre, Pulp, Insulation, Etc. ) Or Insulationboards / Slabs / Blankets, Any Thickness, Including Cover Fillets , Complete All As Specified And As As Directed. 28 S&F False Ceiling With Powder Coated Exposed G.I. Grid Suspension System Consisting Of Main Runner 3600 Mm Long, Cross Tee 1200Mm / 600Mm Long And Wall Angle, Wall Angle Fixed On Pvc Dash Fasteners On The Perimeter Of The Wall By Steel Screws With Distance 300 Mm C / C, Main Runners Placed @ 1200Mm, Cross Tee 1200Mm Inserted In The Pre-Cut Slots Of Main Runner At A Regular Interval Of 600 Mm To Form A Modular Grid Of 1200Mm X 600Mm And Additional Cross Tees Of 600 Mm Placed Perpendicular To The Cross Tee 1200 Mm Long To Finally Form A Grid Of 600Mm X 600Mm, Grid Of Module Size 600Mm X 600Mm Shall Be Supported By 6 Mm Dia G.I. Wire From Purlins / Soffit Complete All As Specified And Directed. Note: Ceiling Board Will Measured And Paid Seperately Under Appropriate Item. 29 All As Per Item No. 28 Above, But Except Material ( Serviceable Gi Snap Grid Obtained From Item No. 28 Here In Before ) Complete All As Specireid And As Directed. Note: Ceiling Board To Measured Separately Under Appropriate Item. 30 S&F 12Mm Thick Mineral Fibre Core Ceiling Board / Tiles For Insulation And Accoustic Purposes, 60X60 Cm In Size, Fixed With Gi Snap Grid Frame Work With Steel Screws, Complete All As Specified And As Directed. 31 All As Per Item No. 30 Above, But Except Material ( Serviceable Boards Obtained From Item No. 25 Here In Before ) Complete All As Specireid And As Directed. 32 S & F 5Mm Thick Pvc Insulation Panels With Eps Stuck To 1Mm Plain Pvc Sheet Suitably Placed In Wall Panneling Including Necessary Screw, Rawl Plug, Adhesive , Various Pvc Angle / Section All As Per Manufacture Instruction And Specification Or Directed By Engr-In-Charge. 33 S&F 6Mm Thick Non-Asbestos Cement Plain Building Boards, Fixed To Wall, Including Finishing With 2 Mm Thick Wall Care Puttycomplete All As Specified And As Directed. 34 M&L For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame, Including Various Pvc Angle / Section All As Per Manufacture Instruction And Specificationas Including Taking Down Carefully The Existing Electric Point Wiring And Making It Concealed By Cutting Grooves On Brick Walls As Required At Site For Wall Panelling Complete All As Specified And As Directed. 35 M&L For 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing. 36 Dismantling Floor, Paver Tiles, Hearth Or Wall Tiling, Etc. Including Cement Mortar Bedding ( But Not Backing ) And Removing Debris, Etc. To Outside Md / Af Land, Complete All As Specified And As Directed. 37 M&L Non-Skid Glazed Ceramic Coloured / Printed Tiles 400X400x6.0 To 7.0Mm Thick In Flooring, Set And Jointed In Neat Cement Slurry And Pointed In White / Coloured Cement, Laid Over And Including 15Mm Thick Screed Or Screed Bed In Cement Mortar 1:4, Complete All As Specified And As Directed.Note : Cost Of Cement Screed Bed Shall Deem To Be Include In The Quoted Unit Rate. 38 M&L Coloured Glazed Ceramic Tiles In Vertical Surface 450X 300X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including 10Mm Thick Rendering As Screed Or Backing Coat Of Wall Tilein Cement Mortar 1:4, Complete All As Specified And As Directed.Note : Cost Of Cement Screed Bed Shall Deem To Be Include In The Quoted Unit Rate. 39 M&L Vitirified Coloured Tiles 9 To 10Mm Thick ( Square / Rectangular ) , Double Charge, Light Shade, Polished, Area Of Each Tile Not Exc. 0.36 Square Metre In Floors, Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Tiles, Laid Over And Including 15Mm Thick Screed Or Screed Bed In Cement Mortar 1:4, Complete All As Specified And As Directed.Note : Cost Of Cement Screed Bed Shall Deem To Be Include In The Quoted Unit Rate. 40 M&L Vitirified Coloured Tiles 9 To 10Mm Thick ( Square / Rectangular ) Double Charge, Light Shade, Polished, Area Of Each Tile Not Exc. 0.36 Square Metre In Vertical Surface I.E. Dado, Skirting, Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including 10Mm Thick Screed Or Screed Bed In Cement Mortar 1:4, Complete All As Specified And As Directed.Note : Cost Of Cement Screed Bed Shall Deem To Be Include In The Quoted Unit Rate. 41 M&L For Floor ( Paver ) Tiles 400X400x9.0 To 10Mm, Highly Abrasive, Anti-Skid, Impact Resistance, Laid Over And Including 15Mm Thick Screed Bed In Cement Mortar 1:6, Complete All As Specified And As Directed. Note : Cost Of Cement Screed Bed Shall Deem To Be Included In The Quoted Unit Rate. 42 Taking Up Or Down Steel Tubing 15Mm Bore ( Dia ) And Connections, Segregating The Serviceable Pipes And Connections, Stacking Properly At Site ( S ) And Keep In Safe Custody For Re-Use, Complete All As Specified And As Directed. 43 Taking Up Or Down Steel Tubing 20Mm Bore ( Dia ) And Connections, Segregating The Serviceable Pipes And Connections, Stacking Properly At Site ( S ) And Keep In Safe Custody For Re-Use, Complete All As Specified And As Directed. 44 Supply & Laying Steel Water Tubing 15Mm Bore ( Dia ) , Galvanised, ‘Medium Grade’ With All Fittings, Fixed On Walls, Ceiling Or Laid In Floors Or Any Other Situation, Complete As All Specified And As Directed. 45 Supply & Laying Steel Water Tubing 20Mm Bore ( Dia ) , Galvanised, ‘Medium Grade’ With All Fittings, Fixed On Walls, Ceiling Or Laid In Floors Or Any Other Situation, Complete As All Specified And As Directed. 46 S&F In Repair Vitreous China Floor Mounted One Piece Closet ( Pedestal Pattern ) , White Including Vitreous China Valveless Syphonic Action Type Flushing Cistern With Inlet Ball Valve Float, Push Button, Flush Pipe Incl Bracket, P / S Trap, Pvc Soft Close Seat Cover And Connecting Fittings Complete All As Specified And Directed. ( Make : Cera, Model: Champ / Parryware, Model: Entice / Hindware, Model: Flora / Asian Paints, Model: Immerse / Essco, Cat No: Ais-Wht-101851S220sppsm ) 47 S&F In Repair 10 Ltrs Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets And Incl With Flush Pipe Of Polyethylene Of Low Or High Density Or Pvc. 32 Mm Dia, For Low Level Cistern Complete All As Specified And Directed. ( Make : Parryware, Model : Slim Line Economy / Hindware, Model : Sleek Plus / Cera, Model : Corona / Prayag, Model: Smart / Essco, Cat No: Whe-Wht-183Nl ) 48 S&F In Repair Rectangular Shape Wash Basin, White, Counter Top , Excluding Taps, Waste, Chain And Plug And Porcelain Stopper Butincluding Brackets, Coupling, Cutting For And Pinning In Ends Of Brackets Or Erecting Stand But Exclusive Of Fixing Of Supply And Waste Pipe Complete All As Specified And Directed. ( Make : Essco, Cat No : Ais-Wht-101901 / Prayag, Cat No: 4717 / Johnson Pedder, Cat No : J85171c ) 49 S&F In Repair Vitreous China Wash Hand Basin 550X400mm In Size, White ( Flat Back Or Angle Back Type ) With 32Mm Dia Brass Chromium Plated Waste Fitting, Making Good Disturbed Surfaces In Cement Mortar 1:3 Complete All As Specified And Directed. ( Make : Parryware, Cat No. C0406 / Hindware, Cat No. 10010 / Cera, Cat No: S2040141 / Essco, Cat No: Ecs-Wht-801 ) 50 S&F In Repair Chromium Plated Brass Bib Cock With Wall Flange ( Premium Range ) , Fancy Type, Long Body, Fixed To 15 Mm Bore Of Iron Pipe Complete All As Specified And Directed. 51 S&F In Repair 15Mm Bore Chromium Plated Single Lever Central Hole Basin Mixer ( Premium Range ) Without Popup Waste System With 450Mm Long Copper Pipe And Brass Nut, Complete All As Specified And Directed. 52 S&F In Repairs Chromium Plated Brass Pillar Tap ( Premium Range ) , Fancy Type. With Areator, Fixed To Wash Hand Basin, Complete All As Specified And Directed. 53 S&F In Repair Angle Valve, 15 Mm Bore, Cast Copper Alloy, Chromium Plated Fancy Type, Concealed Type With Wall Flange Fixed To Iron Pipe Complete All As Specified And Directed. 54 S&F In Repairs Vitreous China Wash Down Water Closet Pan ( Pedestal Pattern ) , White, With P Or S Trap Front Or Back Inlet, Fixing Bolts ( Except Flushing Cistern And Flush Pipe ) Incl Plastic Water Closet Seat Cover ( White ) And Mild Steel Chromium Plated Or Aluminium Hinging Device Complete All As Specified And Directed. 55 S&F In Repair Pvc Waste Pipe 32Mm Dia ( Bore ) Having 600Mm Long And Fixed Complete To Walls, Ceilings Or In Floors, Etc. Complete All As Specified And As Directed. 56 S&F In Repairs Low Density Polyethylene Pipe Connection, Comprising Of 15 Mm Dia 600 Mm Long Having Ptmt Union At Each End Complete All As Specified And Directed. ( Make : Prayag, Cat No. 324-Zk / Polytuf, Cat No. 4004-D / Shakti, Cat No: Sb 1324-D Or Equivalent Model In Jexon / Johnson Pedder ) 57 M&L For Rcc 1:2:4 ( Type B1 ) Using 20Mm Graded Aggregate As Counter / Platform Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed. 58 M&L Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.90 Mm Dia, Complete All As Specified And As Directed. 59 M&L Dismantling Stone Slabs And / Or Tiles Of Any Description Or Thickness In Floors, Aprons, Etc. Laid, Bedded And Pointed In Cement Mortar, Removal Of Debris Outside Af Land, Cleaning Of Area To Remove Dust, Loose Particles, Washing With Water And Providinggranite ( Of Any Type ) Tiles, 18-20Mm Thick, Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement And Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing, Laid Over And Including 20Mm Thick Screed Or Screed Bed In Cement Mortar 1:4, Complete All As Specified And As Directed.Note : Cost Of Cement Screed Bed Shall Deem To Be Included In The Quoted Unit Rate. 60 Hacking Out Old Broken Glass ( Any Thickness, Size, Quality Or Description ) From Wooden Or Metal Frames, Glazed With Putty Or Fixed With Beads, Complete All As Specified And As Directed. 61 S&F Sheet Glass 4.0Mm Thick, Ordinary Quality And Glazing With Oil Putty In Square Not Exc. 0.50 Sqm In Each Pane Of Steel Windows, Complete All As Specified And As Directed. 62 S&F Looking Mirror 5.0Mm Thick Of Size 600X600mm, Fixed With Chromium Plated Brass Spacers 25Mm To 30Mm In Size ( One Each Corner ) Including Rounding The Edges Of The Mirror And Fixed-In-Repairs, Complete All As Specified And As Directed. 63 S&F In Repairs, Tubular Towel Rail, 20Mm Dia, 600 Mm Long Between Flanges Including Brass Chromium Plated, Complete All As Specified And Directed. 64 S&F In Repairs Stainless Steel Round Grating 127Mm Dia Complete All As Specified And Directed. ( Make : Prayag, Cat No: Ft-64 Orequivalent Make As Approved By Ge ) 65 S&F In Repair Chromium Plated Hand Shower ( Health Faucet ) , Abs Body With 1.2 Metre Long Flexible Tube In Chrome Finish With Wall Hook Complete All As Specified And Directed. 66 S&F In Repair Vitreous China, White, Half Stall Urinal Flat Back With Grating And Union For Discharge Pipe ( Excl Flush Pipe And Flushing Cistern And Waste Pipe ) Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. 67 S & F Brass Chromium Plated Urinal Spreader For Fixing With 15 Mm Dia Pipe Complee All As Specified And As Directed. 68 S & F In Repair 75Mm Bore Pvc ( Swr ) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors Complete All As Specified And As Directed. 69 S & F In Repair 110Mm Bore Pvc ( Swr ) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors Complete All As Specified And As Directed. 70 S & F In Repair Pvc ( Swr ) Bends Any 75Mm Bore Complete All As Specified And As Directed 71 S & F In Repair Pvc ( Swr ) Bends Any 110Mm Bore Complete All As Specified And As Directed 72 S & F In Repair 75Mm Bore Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement 73 Taking Down Wooden Chowkat Or Frame With Shutter ( Without Taking Off Shutter From The Frame ) , Exc. 1.5 Square Metre But Not Exc. 4.0 Square Metre Each, Complete All As Specified And As Directed. 74 Taking Down Wooden Chowkat Or Frame With Shutter ( Without Taking Off Shutter From The Frame ) , Not Exc. 1.50 Square Metre Each, Complete And All As Directed By Engineer In Charge. 75 Taking Down Wooden Shutter Of Any Description, Exc. 1.0 Square Metre But Not Exc. 2.0 Square Metre Each, Complete And All As Directed By Engineer In Charge. 76 S&F Pressed Steel Frame Of Size 105X60mm Using 1.25Mm Thick Mild Steel Sheets For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete All As Specified And As Directed. ( Note: Quoted Rate Shall Be Deemed T Include For The Cost Ms Hinge Duly Welded To Frame ) 77 M&L Cement Concrete 1:3:6 ( 20Mm Graded Stone Aggregate ) As In Filling Back Side Of Pressed Steel Frame, Complete All As Specified And As Directed. 78 S&F Flush Door Shutter 35Mm Thick, Solid Core Construction With Block Board Core And Plywood Face Panels Commercial Type On Both Side With Decorative Face Veneer With Lipping / Frame To Match And Fitted To Steel Frame, Complete All As Specified And As Directed. 79 M&L Second Class Hardwood Plain Framed Panelled Shutter Factory Made 35Mm Thick ( Any Number Of Panels ) With Panels Of 12Mm Thick Veneered Particle Board, Medium Density Or 12Mm Thick Plywood Board, Bwr With Commercial Veneering On Both Faces And Fitted To Steel Frame, Complete All As Specified And As Directed. 80 M&L Steel Window Box Type Factory Made Using Erw P Section Comprising Double Frame For Gauged And Glazed Skeleton Shutter Jointed Internally With Flat Iron 40X3mm Complete Including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs Including Gi Steel Wire Cloth, Glazing, Etc. Incluidng Painting Two Coat Over A Coat Of Primer Complete All As Directed. Outer Section Of Frame Should Be 50X25mm And Inner Section Should Be 40X20mm, Complete All As Specified And As Directed.Note :- ( A ) For The Purpose Of Measurement & Payment Double Shutter With Frame Shall Be Considered As One Unit. ( B ) Cost Of Iron Mongery As Ordered / Required At Site, Gi Steel Wire Cloth Will Deem To Be Included In The Quoted Unit Rate. ( C ) Guard Bars Are Included In The Quoted Unit Rate. Spacing Of 10Mm Square Bar Will Be 10 Cm Centre To Centre. ( D ) Glazing Shall Be Measured And Paid Separately Under Appropriate Item. 81 M&L For Factory Made Steel Window With Side Hung Shutters Including Butt Hinges With Steel Handle And Steel Peg Stay, Complete With Glazing Bars, Dovetailed Or Welded All As Specified And As Direced, Including One Shop Coat Of Zinc Chromate Primer, Complete All As Specified And As Directed.Note : Glazing Shall Be Measured And Paid Seperately Under Appropriate Items. 82 S&F Solid Pvc Door Frame Of Wood Grain Of Size 50X47mm Made Out Of 5.0Mm Plain Colour ( Ivory Shade ) Pvc Sheet Reinforced With Mild Steel Square Tube And Fixing In Opening, Complete All As Specified And As Directed. 83 M&L Factory Made Solid Panel Pvc Door Shutter 28-30Mm Thick ( Style ) With Wood Free Eps, Plain Colour ( Ivory Shade ) Consisting Of Frame Made Out Of Mild Steel Tubes For Top And Bottom Rails, Mild Steel Frame Shall Be Covered With Heatmoulded Wood Grain Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Wood Grain Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side And As Gap Insert For Top Rail & Bottom Rail, Panelling Of Wood Grain Pvc Sheet To Be Fitted In The Mild Steel Frame Welded / Sealed To The Stiles And Rails With Suitable 5Mm Thick X 15Mm Wide Pvc Sheet Beading Used Inside Stiles And Rails And Decorative Pvc Beading Of 10Mm X 10Mm ( 90° ) And Jointed Togetherwith Solvent Cement And Fixing In The Frame At Site, Complete All As Specified And As Directed. 84 S & F Butt Hinges Of Size 100Mm, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-21 Complete All As Specified And As Directed. 85 S&F Aluminium Handle 150Mm Long ( Weight Not Less Than 120 Gram ) , Extruded Section, Fabricated Type, Anodised, Complete All As Specified And As Directed. 86 S&F Aluminium Barrel Tower Bolt 200Mm Long ( Weight Not Less Than 210 Gram ) , Extruded Section, Complete All As Specified And As Directed. 87 S&F Aluminium Alloy, Anodized, Sliding Door Bolt 250Mm Long ( Weight Not Less Than 330 Gram ) With Hasp Staple ( Bolt Type ) And Fixing Clips Of Sheet Cast Or Extruded Section And Fixing Bolts And Sliding Bolts Of Extruded Section And Fixing, Complete All As Specified And As Directed. 88 M&L Preparing New Or Previously Untreated Steel And Iron Surfaces Of Any Description, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint ( First Quality ) Over A Red Oxide Zinc Chrome Primer, Complete All As Specified And As Directed. 89 M&L Preparing New Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint ( First Quality ) Over A Coat Of Pink Primer, Complete All As Specified And As Directed. 90 M&L For Forming Embankment Including Raising Or Lowering With A Mixture Of Saw Dust And Tibba Sand ( Mixed In A Ratio Of 1:3 ) , Spreading In Layers Not Exc. 30 Cm Thick Required Size, Made Up To Desired Shape Upto 4.50 Metre High From Base On Small Arms Range ( Firing Range ) Of Butt Wall Including Proper Ramming And Compaction Of Each Layer Before Applying Subsequent Layers Complete All As Specified And As Directed.Notes: 1 ) Saw Dust & Tibba Sand Shall Be Arranged By Contractor From Outside Af Area Under His Own Arrangement And Cost Of The Same Shall Be Deemed To Be Included In Quoted Rate. 91 S&F In Repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical With Closed Top, 3 Layered, Conforming To Is, Hoisted And Fixed In Position Complete All As Specified And As Directed. 92 S&F In Repair Ball Valve 20Mm Dia ( Minimum Weight 210 Gram ) , High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball, Screwed For Iron Pipe Complete All As Specified And As Directed. 93 Repairing Of Aluminium Door, Windows, Ventilators Shutter Fixed / Side Hang / Sliding Type Including Replacement Of Necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, Etc. And Repairing Of Locking Arrangement If Any, Complete All As Specified And As Directed.Note : Cost Of Materials Requiredfor Smooth Functioning Of Shutter Shall Deem To Be Included In The Quoted Unit Rate.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	30-Dec-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	06-01-2024

INR 500 /-

INR 30000.0 /-

INR 15 Lakhs /-

NAME OF WORK : COMPREHENSIVE MAINT TO TECH AREA (SOUTHERN SIDE) AT AF STN SIRSA

Sl. No.	Item Description
1	Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
2	M&L Cement Concrete 1:4:8 (40mm Graded Stone Aggregate) 100mm thick in Sub-bases, complete all as specified and as directed.
3	M&L Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) 100mm thick as in flooring, finished even and fair complete all as specified and as directed.
4	M&L Cement Concrete 1:3:6 (40mm Graded Stone Aggregate) 75mm thick in plinth protectionfinishing cement concrete surfaces even and smmoth without using extra cement, complete all as specified and as directed.
5	M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,with grey cement & no pigment, incl taking out and removing debris from outside MD land, complete all as specified. (NOTE: Sand cushioning shall be measured and paid seperately)
6	M&Lfor sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed.
7	M&L Providing, cement concrete 1:2:4 type B1 20mm graded aggregate as in coping finished even and smooth without using extra cement complete all as specified and as directed.
8	Dismantling of CGI/Asbestos cement(corrugated, semi corrugated, plain, etc.) sheets in roof/wall coverings, complete all as specified and as directed.
9	S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheetinghaving 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 smallstiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof completeall as specified and directed.
10	All as per Item No. 09 above but 0.50 mm thick colouredplain galvalume sheet as in ridge/valley gutter of roof.
11	Dismantling structural steel or Mild steel work of any discription not otherwise provided for, complete all as specified.
12	M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
13	Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., removal of debris outside AF land complete all as specified and as directed.
14	M&L for Brick Work with Fly-AshBricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
15	M&L Brick work using Serviceable Bricks obtained from Item No. 16 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
16	Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
17	M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls/Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
18	M&L for Rendering (Ceiling) 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
19	M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound(as per manufacturer"s instructions) onbrick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfacescomplete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".
20	Supply only Liquid Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
21	M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.
22	M&L preparing New Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Emulsion Paint (in Camuflage pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed.
23	M&L preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Emulsion Paint (in Camouflage pattern as ordered) with approved Tint as per manufacturer"s instructions over a coat of primer, complete all as specified and as directed.
24	M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty, 2 mm thick including rubbing down with Sand Paper to obtain a smooth finish surface and applying with rollers Two Coats of Acrylic Distemper (as approved) over a Coat of Primer, complete all as specified and as directed.
25	M&L for Preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
26	Dismantling of ceiling grid frame, any type alongwith ceiling board of any thickness including cover fillets complete all as specified and directed.
27	Dismantling ofWallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets , complete all as specified and as as directed.
28	S&F false ceiling with powder coated exposed G.I. grid suspension system consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle, wall angle fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c, Main Runners placed @ 1200mm, Cross Tee 1200mm inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm and additional cross tees of 600 mm placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit complete all as specified and directed. Note: Ceiling board will measured and paid seperately under appropriate item.
29	All as per item No. 28 above, but except material (Serviceable GI snap grid obtained from item No. 28 here in before) complete all as specireid and as directed. Note: Ceiling board to measured separately under appropriate item.
30	S&F 12mm thick mineral fibre core ceiling board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with GI Snap Grid Frame Work with Steel Screws, complete all as specified and as directed.
31	All as per item No. 30 above, but except material (Serviceable boards obtained from item No. 25 here in before) complete all as specireid and as directed.
32	S & F 5mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in wall panneling including necessary screw, rawl plug, adhesive , various PVC angle/section all as per manufacture instruction and specification or directed by Engr-in-charge.
33	S&F 6mm thick non-asbestos cement plain building boards, fixed to wall, including finishing with 2 mm thick wall care puttycomplete all as specified and as directed.
34	M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, including various PVC angle/section all as per manufacture instruction and specificationas including taking down carefully the existing electric point wiring and making it concealed by cutting grooves on brick walls as required at site for wall panelling complete all as specified and as directed.
35	M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
36	Dismantling Floor, Paver Tiles, Hearth or Wall Tiling,etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
37	M&L Non-skid Glazed Ceramic Coloured/Printed Tiles 400x400x6.0 to 7.0mm thick in Flooring, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
38	M&L Coloured Glazed Ceramic Tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tilein Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
39	M&L Vitirified Coloured Tiles 9 to 10mm thick (Square/ Rectangular), Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
40	M&L Vitirified Coloured Tiles 9 to 10mm thick (Square/ Rectangular) Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
41	M&L for Floor (paver) tiles 400x400x9.0 to 10mm, highly abrasive, anti-skid, impact resistance, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Note : Cost of Cement screed bed shall deem to be included in the Quoted Unit Rate.
42	Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
43	Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
44	Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
45	Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
46	S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE / ESSCO, Cat No: AIS-WHT-101851S220SPPSM )
47	S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
48	S&F in repair rectangular shape wash basin, white, counter top , excluding taps, waste, chain and plug and porcelain stopper butincluding brackets, coupling,cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. (MAKE : ESSCO, Cat No : AIS-WHT-101901 / PRAYAG, Cat No: 4717 / JOHNSON PEDDER, Cat No : J85171C)
49	S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / CERA, Cat No: S2040141 / ESSCO, Cat No: ECS-WHT-801)
50	S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
51	S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.
52	S&F in repairs Chromium plated brass Pillar tap (premium range), fancy type. with areator, fixed to wash hand basin, complete all as specified and directed.
53	S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.
54	S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with "P" or "S" trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
55	S&F in repair PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc. complete all as specified and as directed.
56	S&F in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324-ZK / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON /JOHNSON PEDDER)
57	M&L for RCC 1:2:4 (type B1) using 20mm graded aggregate as counter/platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
58	M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
59	M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providingGranite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
60	Hacking out old broken Glass (any thickness, size, quality or description) from Wooden or Metal Frames, glazed with putty or fixed with beads, complete all as specified and as directed.
61	S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
62	S&F Looking Mirror 5.0mm thick of size 600x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.
63	S&F in repairs, Tubular towel rail, 20mm dia,600 mm long between flanges including brass chromium plated, complete all as specified and directed.
64	S&F in repairs stainless steel round grating 127mm dia complete all as specified and directed. (Make : PRAYAG, Cat No: FT-64 orequivalent make as approved by GE)
65	S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
66	S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.
67	S & F brass chromium plated Urinal spreader for fixing with 15 mm dia pipe complee all as specified and as directed.
68	S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
69	S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
70	S & F in repair PVC (SWR) bends any 75mm bore complete all as specified and as directed
71	S & F in repair PVC (SWR) bends any 110mm bore complete all as specified and as directed
72	S & F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
73	Taking down Wooden Chowkat or Frame with Shutter (without taking off Shutter from the Frame), exc. 1.5 Square Metre but not exc. 4.0 Square Metre Each, complete all as specified and as directed.
74	Taking down Wooden Chowkat or Frame with Shutter (without taking off Shutter from the Frame), not exc. 1.50 Square Metre Each,complete and all as directed by Engineer in Charge.
75	Taking down Wooden Shutter of any description, exc. 1.0 Square Metre but not exc. 2.0 Square Metre Each, complete and all as directed by Engineer in Charge.
76	S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed. (NOTE: Quoted rate shall be deemed t include for the cost MS Hinge duly welded to frame)
77	M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.
78	S&F Flush Door Shutter 35mm thick, Solid Core Construction with Block Board core and Plywood face Panels commercial type on both side with Decorative face Veneer with Lipping/Frame to match and fitted to Steel Frame, complete all as specified and as directed.
79	M&L Second Class Hardwood Plain Framed Panelled Shutter factory made 35mm thick (any number of Panels) with Panels of 12mm thick Veneered Particle Board, medium density or 12mm thick Plywood Board, BWR with commercial veneering on both faces and fitted to Steel Frame, complete all as specified and as directed.
80	M&L Steel Window Box type factory made using ERW "P" Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. incluidng painting two coat over a coat of primer complete all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a)For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b)Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c)Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d)Glazing shall be Measured and Paid separately under appropriate Item.
81	M&L for Factory made Steel Window with side hung shutters including butt hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as direced, including one shop coat of zinc chromate primer, complete all as specified and as directed. Note : Glazing shall be measured and paid seperately under appropriate items.
82	S&F Solid PVC Door Frame of Wood grain of size 50x47mm made out of 5.0mm Plain Colour (Ivory shade) PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening, complete all as specified and as directed.
83	M&L Factory Made Solid Panel PVC Door Shutter 28-30mm thick (Style) with wood free EPS, Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heatmoulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed togetherwith Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.
84	S & F Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
85	S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and as directed.
86	S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.
87	S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long (weight not less than 330 Gram) with Hasp Staple (Bolt type) and Fixing Clips of Sheet Cast or Extruded Section and Fixing Bolts and Sliding Bolts of Extruded Section and fixing, complete all as specified and as directed.
88	M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
89	M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
90	M&L for Forming Embankment including Raising or Lowering with a Mixture of Saw Dust and Tibba Sand (mixed in a ratio of 1:3), Spreading in layers not exc. 30 Cm thick required size, made up to desired shape upto 4.50 Metre high from base on Small Arms Range (Firing Range) of Butt Wall including proper ramming and compaction of each layer before applying subsequent layers complete all as specified and as directed. NOTES: 1)Saw dust & tibba sand shall be arranged by contractor from outside AF area under his own arrangement and cost of the same shall be deemed to be included in quoted rate.
91	S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.
92	S&F in repair Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe complete all as specified and as directed.
93	Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hang /Sliding Type including replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed. NOTE : Cost of Materials requiredfor smooth functioning of Shutter shall deem to be included in the Quoted Unit Rate.