Tender For Procurement, Delivery And Fixing Of Office Furniture For Newly Created Chandpara Ccc Under Bongaon Division, 24 Paraganas North-West Bengal

Procurement, Delivery And Fixing Of Office Furniture For Newly Created Chandpara Ccc Under Bongaon Division , Executive Table: Size: Length- 6’X3’X2’-6” Steel Or Wooden Make. , Executive Chair: Back Size:- 50.0Cm ( W ) X 70.0 Cm ( H ) Seat Size:- 50.0Cm ( W ) X 45.0Cm ( D ) Armrests:- Length 200Mm ( Min ) , Width 50Mm ( Min ) & Height From Seat 200Mm , Computer Table: 1 ) Size- Length- 3’X1’-6”X2’-6” 2 ) With Proper Arrangement Of Keyboard Tray, Space For Cpu, Wire Management, Lockable Castor. 3 ) Pre-Laminated Processed Wood ( Plb / Mdf / Plywood ) 18 Mm With All Sides 2 Mm Pvc Edging , Office Chair: Back Size:- 40.0Cm ( W ) X 45.0 Cm ( H ) Seat Size:- 40.0Cm ( W ) X 40.0Cm ( D ) 3. Armrests: The Armrest Should Be Of Fixed Type Armrest , Moulded Plastic Chair: Steel Make With Cushioning And Arm Rest. , Normal Wooden Table , Steel Almirah ( 4 Shelves & 5 Compartment ) : Size:- 916Mm ( W ) X 486Mm ( D ) X 1980Mm ( H ) Atleast 4Nos. Adjustable Storage Sheles Making 5 Compartments Construction & Material: Welded Construction Mm Thick Crca ‘D’ Grade ( As Per Is:513 ) For Shelf 0.8Mm Thick Crca ‘D’ Grade ( As Per Is:513 ) For Back Mm Thick Crca ‘D’ Grade High Yield Strength ( As Per Is:513 ) For Doors 0.9Mm Thick Crca ‘D’ Grade ( As Per Is:513 ) For All Other Components. Three Way Bolting Device And Standard Lock With High Quality Hinges And Overlaping Doors. Finish Should Be Of Epoxy Powder Coated To The Thickness Of 50 Microns ( ±10 ) . , Visitors Bench , Slotted Steel Rack: Size:- 78”X 35” X 18” 5Nos. Adjustable Shelves Making 4 Compartments. Open Type Steel Rack On 40Mm X 40Mm X 2Mm Slotted Angles. Joints In Angle Iron Shall Not Be Allowed. 0.8Mm Thick Crca ‘D’ Grade ( As Per Is:513 ) For Shelf. Shelf Shall Be Formed Such That Length Wise Edges Are Bent Twice At Right Angle And Widthwise Edges Are To Be Bent One Time. Press Cut Shelf Corner Plates Of 0.8Mm Thick Cr Sheet Should Be Fixed At Upper And Lower Shelves 8Nos. Each. The Racks Shall Be Assembled With Gi Bolts, Nuts And Washer Where Ever Required. No Sharp Edges On Angle Iron End Shall Be Allowed. H / D Rubber Bushes Shall Be Provided To The Bottom Of Legs Of Slotted Angle Racks. Painted With Synthetic Enamel Paint. No Minus Tolerance Is Allowed In Angle Thickness.

Refer document

INR 9825.0 /-

INR 4.91 Lakhs /-