Tender For Strengthening Of Street Light With Low Height Pole At Sector 107 Link Road, Noida (Dark Spot Identified By Police), noida-Uttar Pradesh

Tender For Strengthening Of Street Light With Low Height Pole At Sector 107 Link Road, Noida ( Dark Spot Identified By Police ) ; 1 Supply & Fixing Of 6 Mtr Gi Octagonal Pole Of Approved Make ( Top Dia 70Mm, Bottom Dia 130Mm And Base Plate 12Mm Thik ) Having 3Mm Thikness With Double Arm Bracket 1.50 Mtr Length In 1:2:4 Rcc Foundation Bolt Including The Cost Of Foundation, Excavation & Back Filling And Required T&P Completee In All Respect. ( Foundation Height Above 45Cm. Above Ground Level Including Shifting Old Lights To New Pole ) ( Ps No. 648 ) ( Make - G.E. / Philips / Bajaj Or Equivelent ) 2 Supply And Fixing Of Led Street Light Fitting Having Die Cast Aluminium Body And Diffuser With Driver Set Suitable For 110 To 130 Watt. Confirming To Ip 66 Protection Complete In All Respect. Cat Aaa P.S. No 1424 ( 5 Years Warranty ) 3 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured, Served, Sheathed Cable 1100 Volts Grade At A Depth Of 750 Mm. Below Ground Level Over A Cushion Of 75 Mm. Thick Sand Alround And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respects. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. P.S. No. 501 ( Grandlay, Skytone, Gloster, Kei, HavellS, Diatron Make ) 4 A ) 16 Sq.Mm. X 4 Core 5 B ) 70 Sq.Mm. 3.5Core ( Ps No. 501 ) 6 S / F Of Cable Lug ( Socket ) To The Cable Lead. Complete In All Respects As Per Ps No. 504 7 A ) - 16 Sq.Mm. 8 B ) - 35 Sq.Mm. 9 C ) - 70 Sq.Mm. 10 S / Laying Of90 Mm Dia ( Od 90 Mm & Id 76 Mm Nominal ) Size Of ( Dwc ) Hdpe Pipes Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part-Ii Complete With Filling And Cutting, Jointing Etc. Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench Pat Excluding Sand Cushioning And Protective Covering Etc. Complete In All Respects. ( Trenchless If Required ) Rex / Duraline / Time / Cpe Make. As Per Dsr 2018 Item No. 14.16.2 Page No. 49 11 S / Laying Of63 Mm Dia ( Od 63 Mm & Id 51 Mm Nominal ) Size Of ( Dwc ) Hdpe Pipes Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part-Ii Complete With Filling And Cutting, Jointing Etc. Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench Or Trenchless Method If Required But Excluding Sand Cushioning And Protective Covering Etc. Complete In All Respects. Rex / Duraline / Time / Cpe Make. As Per Dsr 2018 Item No. 14.16.1 Page No. 49 12 Supply And Fixing Of 40 Amp Tpncapacity Of Automatic Street Light Cubical Control Panel Painted With Anti Corrosive Alkali And Acid Proof Paint Crossing Of Time Switch Tso 100 Series With Contractors, Hrc Fuse, Isolating Swtich Metering Instrument & Instrument Box With Cts Etc. In Case Of Tpn, Complete In All Respects. As Per Ps No. 807F 13 Numbering Of Pole / Gi Post / Feeder Pillar With Combination Of Yellow And Black Colour Paint Etc. Complte In All Respects As Per Direction Of E / I. ( Aor ) 14 Supply And Burring Of Safe Earthing Electrode T-19 ( Hot Dip Galvanized ) , Length Up To 2000Mm, Outer Pipe 50Mm, Inner Pipe 25, Terminal Dia 12 Mm, Outer Gi Pipe Of 16 Swg And Inner Gi Pipe Of 12 Swg With Hot Dip Galvanization Up To 100 Micron Filled With Crystalline Conductive Mixture ( Ccm ) Having Anti Corrosive & Conductive Property With 50 Kgs Activated Soil ( Bfc ) Capable Of Reducing The Soil Resistivity With Good Mixture Of Retaining Capacity Along With 30Cm Square C.I. Frame With Hinged Cover & Masonry Husing ( From Electrode Terminal To Switch Board, Cost Of 25 X 3 G.I . Strip Will Be Extra ) Make: As Approved In U.P. P.W.D., & C.P.R.I. Certified. ( P.S. No 725A ) 15 Dismantling Of Pole / Street Light Standard / Strut Embedded In Cement Concrete Foundation Etc. As Required Including Cartage For Old Pole Stacking In To Authority Store And Removing Concrete Malba From Site. ( Dsr-2018 / Item No. 12.42 P-46 ) 16 Supply And Burring Of Safe Earthing Electrode T-19 ( Hot Dip Galvanized ) , Length Up To 3000Mm, Outer Pipe 50Mm, Inner Dia 25Mm, Terminal Dia 12 Mm, Outer Gi Pipe Of 16 Swg And Inner Gi Pipe Of 12 Swg With Hot Dip Galvanization Up To 100 Micron Filled With Crystalline Conductive Mixture ( Ccm ) Having Anti Corrosive & Conductive Property With 50 Kgs Activated Soil ( Bfc ) Capable Of Reducing The Soil Resistivity With Good Mixture Of Retaining Capacity Along With 30Cm Square C.I. Frame With Hinged Cover & Masonry Husing ( From Electrode Terminal To Switch Board, Cost Of 25 X 3 G.I . Strip Will Be Extra ) Make: As Approved In U.P. P.W.D., & C.P.R.I. Certified. ( P.S. No 725B ) 17 Supply & Fixing Of 12.5 Mtr High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Outside Dip, Heaving Pole Sheet Thickness 3 Mm. Top Dia Minium 150 Mm, Bottom Dia 310 Mm Base Plate 25 Mmthick Suitable For Wind Velocity As Per Is 875 Part 3 & Having No Circumferential Weld, With Accessories For High Mast Such As Head Frame Suitable For 6 Luminaries & Its Control Gear Boxes 0.75 Hp Power Tool Moter, 3 Pointsuspension System With Steel Wire Rope 6 Mm Dia, Double Drum Winch, Including Making Suitable Foundation As Per Manufature Drawing / Site Reuiment Along With Foundation Bolts Nuts, Washers, Anchor Plates Etc Completee In All Respect.Ps.No-651 18 Supply And Fixing Of Factory Wired Integral Ledflood Lightuminaires With Die Cast Aluminium Housing Built With Dirver Set Suitable For 140 To 150 Watt. Confirming To Ip 66 Protection Complete In All Respect.Ps.No.1454Cat-Aaa ( 5 Years Warranty ) 19 Supplying And Embedding Following Dia G.I. Pipe ( Medium Class ) In Pole Collar / Foundation ( During Casting ) For Cable Entry Including Bending The Pipe To The Required Shape Complete As Required. Dsr -201811.6.2I ) 40Mm 20 Supply Of Steel Tubular Pole 11 M Long Designated 410-Sp-56 . Complete In All Respects As Per Direction Of E / I. . ( Uperc P-30 ) 21 Errection Of Metallic Pole Of Following Length In Cement Concrete 1:3:6 ( 1Cement:3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) Foundation Including Excavation And Refilling Etc. As Required Above 10.0 Mtr And Upto 12 Mtr ( Dsr 2018 I. N. 11.3.4 ) 22 Supply And Erection Of Overhead Line With Acsr Conductor ( Dog & Raccoon ) Poles / Service Bracket Including Binding Etc.Complete In All Respects. P.S. No. 627 23 Painting Of The Electric Pole With 2 Coats Of Aluminium Paint Over Red Oxide Primer Complete In All Respects. P.S. No. 634 24 Supplying Of Channel Iron 75Mmx40mmx6mm ( 7.14 Kg Per Mtr ) Pole Top Bracket / Cross Arm For Single 11 Kv Overhead Line Conductor Complete With 50Mmx6mm Flat Iron Clamp, Bolts, Nuts And Washer Including Drilling Holes For Insulator Pins Bolts And Nuts Etc, And Painting With Primer And Finish Paint As Required ( Dsr-2018 Item No. 13.2 Pg.44 ) 25 S / E Of Straight Ms Channel 50X100 Mm. ( 9.2 Kg / M ) 2.60 M Long As Per Design With Required Clamps Made Of M.S. Flat Of Size 50X6 Mm. With Nut & Bolts Etc. As Per Direction Of E / I. . ( ( Uperc P-30 ) 26 Supplying And Erection Of 11Kv Pin Insulator Complete With Large Steel Head G.I. Pin, Nuts & Washer Etc. As Required ( Dsr-2018 Item No. 13.10 Pg.46 ) 27 Supplying And Erection Of 11Kv Disc Insulator For 11Kv Overhead Line With Galvanised Inculator Fitting, Ball And Socket Type And Complete With Galvanised Strain Clamp, Bolts, Nuts& Washer Etc. As Required ( Dsr-2018 Item No. 13.11 Pg.45 ) 28 S / F Of 11 Kv Tpmo Relco / Rama / Azad Make 9 Nos. Insulator Of Jai Shree / Bhel / Rama / Rastriya Make Complete In All Respects As Per Direction Of E / I. ( Uperc Page No. 58 ) 29 S / F Of Out Door Type 11Kv Fuse Set Relco / Rama / Rastriya Make With Insulator Jai Shree / Bhel Make Complete In All Respects As Per Direction Of E / I.. ( Aor ) 30 S / E Testing & Commissioning Of 63 Kva Al. Wound Outdoor Type Transformer As Per Iss. Complete In All Respects Make : Azad / P.M. / Kanohar / Ld Power / Paramix As Per Direction Of E / I.. ( Respo Page No. 51 ) 31 Supply And Laying Of 3 Core Standered Aluminium Conductor Xlpe ( Cross Linked Polyethylene ) Insulated Pvc Bedded, Galvanised Flat Steel Strip Armoured Cables Confirming To I.S. 7098 ( Part-Ii With Latest Amendments ) Ii Kv Grade At A Depth Of 900 Mm Below Ground Level Over A Cushion Of 100 Mm Thick Fine River Sand All Around And Protected With Well Burnt Bricks On Sides And On Top Put Across. The Armouring Of Cable Shall Be Properly Connected With Earth Conductor By Clamps Etc. 70 Sqmm 3 Core ( Ps No 506 D ) 32 Hiring Charges Of Mobile Hydraulic Crane 35 Tonne Capacirty ( 173Hp ) Including Fule And Other T & Pfor Shifting Of Pole From One Site To Other Site As Per Direction Of E / I. 33 Supplying And Making Outdoor Cable End Termination With Heat Shrinkable Jointing Kit Complete With All Accessories Including Lugs Suitable For Following Size Of 3 Core, Xlpe Aluminium Conductor Cable Of 11 Kv Grade As Required : 70 Sqmmdsr 2018 Item No. 10.5.1 Page No. 37 34 Supply And Fixing Of 1 Mtr Long Hot Dip Galvanised Single Standard Bracket Made Up Of 40Nb Gi Pipe Suitable For 9 / 10 / 12 Mtr Mounton Pole Having Top 70Mm A / F. Complete In All Respect . As Per Direction Of E / L. 35 Supply And Fixing Of 4 Nos Of M24x750mm Long J Type En 8 Grade Undation Bolt Along With Complete Suitable For 9 Mtr, 10 Mtr, 12 Mtr Octagonal Pole. Complete In All Respect . As Per Direction Of E / L. 36 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . ( Aor ) 37 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : -A ) -Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete ( Aor ) 38 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Up To Plinth Level. -A ) -Cold Twisted Bars. ( Aor ) 39 Cutting Road And Making Good The Same Including Supply Of Extra Quantities Of Materials I.E. Aggregate, Moorum Screening, Red Bajri And Labour Required ( Aor ) 40 ( A ) ( Bituminous Portion ) ( Aor ) 41 ( B ) Water Bound Macadam ( Aor ) 42 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material With In 50 Mtr. Lead As Per Direction Of E / I. Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 43 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) 44 Supply And Laying 2.5 Sqmm 4 Core Pvc Insulated Copper Conductor Control Cable For Highmast Pole Complete In All Respect As Per Direction Of E / I. 45 Supplying And Drawing Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. ( Dsr Elect 2018 / 1.17.3 / P-4 ) 46 3 X 1.5 Sq. Mm

INR 5310 /-

INR 259900.0 /-

INR 1.29 Crore /-

Name of Work :-

Sl. No.	Item Description
1	Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1.50 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.(foundation Height above 45Cm. above Ground level including shifting old lights to new pole)(PS No. 648) (Make - G.E./Philips/Bajaj or equivelent)
2	Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Cat AAA P.S. No 1424 ( 5 years warranty)
3	Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. P.S. No. 501(Grandlay, Skytone, Gloster, KEI, Havell"s, Diatron make)
4	a) 16 Sq.mm. x 4 Core
5	b) 70 Sq.mm. 3.5Core(PS No. 501)
6	S/F of cable Lug(socket) to the cable lead. Complete in all respects as per PS No. 504
7	a)- 16 Sq.mm.
8	b)- 35 Sq.mm.
9	c)- 70 Sq.mm.
10	S/Laying of90 mm dia (OD 90 mm & ID 76 mm nominal) size of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects.( Trenchless if required) Rex/Duraline/Time/CPE make. as per DSR 2018 item no. 14.16.2 page no. 49
11	S/Laying of63 mm dia (OD 63 mm & ID 51 mm nominal) size of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench or Trenchless method if required but excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/Time/CPE make. as per DSR 2018 item no. 14.16.1 page no. 49
12	Supply and fixing of 40 Amp TPNcapacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807f
13	Numbering of Pole/GI post / feeder pillar with combination of yellow and black colour paint etc. complte in all respects as per direction of E/I. (AOR)
14	Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.(P.S. No 725A)
15	Dismantling of pole/Street Light standard /strut embedded in cement concrete foundation etc. as required including cartage for old pole stacking in to authority store and removing concrete malba from site.(DSR-2018/item no. 12.42 P-46)
16	Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 50mm,inner dia 25mm, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.(P.S. No 725B)
17	Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & outside dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mmthick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 pointsuspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.Ps.no-651
18	Supply and fixing of factory wired integral LEDflood lightuminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.Ps.No.1454 CAT-AAA ( 5 years warranty)
19	Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. DSR -201811.6.2i)40mm
20	Supply of Steel Tubular Pole 11 M long designated 410-SP-56 . complete in all respects as per direction of E/I. .(UPERC P-30)
21	Errection of metallic pole of following length in cement concrete 1:3:6 ( 1cement:3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required above 10.0 mtr and upto 12 mtr (DSR 2018 I. n. 11.3.4)
22	Supply and erection of overhead line with ACSR Conductor (Dog & Raccoon) poles / service bracket including binding etc.complete in all respects. P.S. No. 627
23	Painting of the electric pole with 2 Coats of aluminium paint over red oxide primer complete in all respects. P.S. No. 634
24	Supplying of channel iron 75mmx40mmx6mm(7.14 Kg Per mtr) pole top bracket/cross arm for single 11 kV overhead line conductor complete with 50mmx6mm flat iron clamp, bolts, nuts and washer including drilling holes for insulator pins bolts and nuts etc, and painting with primer and finish paint as required (DSR-2018 item no. 13.2 pg.44)
25	S/E of straight MS Channel 50x100 mm. (9.2 Kg/M) 2.60 M long as per design with required clamps made of M.S. flat of size 50x6 mm. with nut & bolts etc. as per direction of E/I. .((UPERC P-30)
26	Supplying and erection of 11kV pin insulator complete with large steel head G.I. Pin, nuts & washer etc. as required (DSR-2018 item no. 13.10 pg.46)
27	Supplying and erection of 11kV Disc insulator for 11kV overhead line with galvanised inculator fitting, ball and socket type and complete with galvanised strain clamp, bolts, nuts& washer etc. as required (DSR-2018 item no. 13.11 pg.45)
28	S/F of 11 KV TPMO Relco/Rama/Azad make 9 Nos. insulator of Jai shree/BHEL/ Rama/ Rastriya make complete in all respects as per direction of E/I.(UPERC page no. 58)
29	S/F of out door type 11KV fuse set Relco/Rama/Rastriya make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I..(AOR)
30	S/E Testing & Commissioning of 63 KVA Al. wound outdoor type Transformer as per ISS. Complete in all respects Make : AZAD/P.M./ Kanohar/LD Power/ Paramix as per direction of E/I..(RESPO page no. 51)
31	Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 70 Sqmm 3 core(PS No 506 d)
32	Hiring charges of Mobile Hydraulic Crane 35 tonne capacirty (173HP) including fule and other T & Pfor shifting of Pole from One site to other site as per direction of E/I.
33	Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 SqmmDSR 2018 item no. 10.5.1 page no. 37
34	Supply and fixing of 1 Mtr long hot dip galvanised single standard bracket made up of 40NB GI Pipe suitable for 9/10/12 Mtr mounton pole having top 70mm A/F. Complete in all respect . As per direction of E/l.
35	Supply and fixing of 4 Nos of M24x750mm long "J" Type EN 8 grade undation bolt along with complete suitable for 9 Mtr, 10 Mtr, 12 Mtr Octagonal pole. Complete in all respect . As per direction of E/l.
36	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (AOR)
37	Centering and shuttering including strutting, propping etc. and removal of form for : -a)-Foundations, footings, Bases of columns, etc. for mass concrete (AOR)
38	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. -a)-Cold twisted bars. (AOR)
39	Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required (AOR)
40	(a) (Bituminous Portion) (AOR)
41	(b) Water Bound Macadam (AOR)
42	Demolishing cement concrete manually/ by mechanical means including disposal of material with in 50 Mtr. Lead as per direction of E/I. Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix)
43	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
44	Supply and laying 2.5 Sqmm 4 Core PVC insulated copper conductor control cable for Highmast Pole complete in all respect as per direction of E/I.
45	Supplying and drawing following sizes ofFRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (DSR Elect 2018/1.17.3/P-4)
46	3 x 1.5 sq. mm