Public Health Engineering Department-PHED has published Tender For Operation And Maintenance Of 4.54 Mld Capacity Multi Village Piped Water Supply Scheme For 34 Villages 223 Habitations In Block Alirajpur Sondwa And Katthiwada Of District Alirajpurcomprising Of Raw Water And Clear Water Pumping Stations Water. Submission Date for this Tender is 29-12-2023. Water Supply Project Tenders in alirajpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 12-Dec-2023 | Technical Qulification | Terms and Conditions | 23-12-2023 |
2 | 12-Dec-2023 | Sansodhan Technical Qulification | Technical Bid | 23-12-2023 |
3 | 23-Dec-2023 | date ext. | Date | 29-12-2023 |
Sl. No. | Item Description |
1 | Item Description 34 village maintt. |
2 | Operation& routinemaintenance of raw water pumping station including required T & P, staff, consumable items like oil, grease, gland etc with Charges for commercial vehicle for operation and maintenance of whole scheme Je vk;qDr dk;kZy; e/;izns"k "kklu bankSj dh vf/klwpuk Ø- 1@11@ vUos@ ikWp @2015@10368&618] bankSj fnukad 31-03-2023 |
3 | Operation & routinemaintenance of Water treatment plantincluding required T & P staff, consumable item like oil, grease, chemical/Glassware etc for water purification and water testing complete.Je vk;qDr dk;kZy; e/;izns"k "kklu bankSj dh vf/klwpuk Ø- 1@11@ vUos@ ikWp @2015@10368&618] bankSj fnukad 31-03-2023 |
4 | Operation & routinemaintenance of clear water pumping station, intermediate pumping station,for filling OHT i/c required T & P and staff consumable items like oil, grease, gland etccomplete.Je vk;qDr dk;kZy; e/;izns"k "kklu bankSj dh vf/klwpuk Ø- 1@11@ vUos@ ikWp @2015@10368&618] bankSj fnukad 31-03-2023 |
5 | Operation and routinemaintenance of raw/clear water pumping/gravity main,distribution,filling of Cistern includingminorconsumable items like oil, grease, gland etc , all labour ,required T&P etc complete.Je vk;qDr dk;kZy; e/;izns"k "kklu bankSj dh vf/klwpuk Ø- 1@11@ vUos@ ikWp @2015@10368&618] bankSj fnukad 31-03-2023 |
6 | Labour only for installation of WoddenKadi shutter of size 1.80 X 0.15 X 0.15 mtr. in the 70 openings of anicut including carting from store to dam site, placing in position, tightening of nut bolt etc. complete after rainy season as directed by department. |
7 | Labour only for dismantling of WoddenKadi shutter of size 2.0 x 0.5 mtr. from 70 openings of anicut including carting from dam site to store unloading etc. complete before rainy season as directed by department. |
8 | Lumsump Provision for Painting,providing and fixing required nut bolt and repairing of WoddenKadi shutters i/c cost of required material and all labour complete as per requirement and instruction of engineer-in-charge. |
9 | Repair & Maintanace of approch road from TP to anicut site & intakewell site after rainy season including levelling ,spreading of earth and moorum etc as requiredcomplete. |
10 | Provision for repairing , raw water motor i/c dismantling, repairing and reinstallation with cost of all material and all labour complete 60 LPS 50 mtr Head vertical tarbine pump Intake well at village Behadwa 2 pump in working condition 1 stand by rate As per willo authorized deler Indore Impeller |
11 | Nack Ring |
12 | Line shaft of 1.5 mtr. |
13 | Line shaft Bearing |
14 | Shaft Coppling |
15 | Head Shaft |
16 | Thrust Bearing |
17 | Shaft Sleeve |
18 | Bowl Bearing |
19 | Provision for repairing , Clear water motor i/c dismantling, repairing and reinstallation with cost of all material and all labour complete 57 LPS 220 mtr Head Centrifugal pump at WTP Behadwa and Mid Pumping station Kharpai 43 LPS 215 mtr Head 4 pump in working condition 2 stand by rate As per willo authorized deler Indore Impeller |
20 | Impeller Key |
21 | Shaft with keys |
22 | Balance Keys |
23 | Nack Ring |
24 | Del Sleeve |
25 | Logging Ring |
26 | Deflector |
27 | Bearing |
28 | Neck bose |
29 | Balance valve |
30 | Combined siting bush |
31 | Oil ring |
32 | Repairing and Rewinding of raw water & clear water motor pumps 270 HP, i/c dismantling, repairing, transportation and reinstallation with cost of all material and all labour complete. (For Three Years) rate |
33 | Repairing and Rewinding of raw water & clear water motor pumps200 HP i/c dismantling, repairing, transportation and reinstallation with cost of all material and all labour complete. (For ThreeYears)rate |
34 | Repairing and Rewinding of raw water & clear water motor pumps 70 HP i/c dismantling, repairing, transportation and reinstallation with cost of all material and all labour complete. (For Three Years) rate |
35 | Job work for Repairing 270 HP, Electric control panel Board and other mesclanius item etc of Intake WTP & Mid pumping station PANEL NO 1 470 A SOFT STARTER 800 A MCCB36KA TP LSIG T6N |
36 | SPREADER T6 TP |
37 | ROM T6 |
38 | 430 A SFU WITH FUSE |
39 | Ameter |
40 | Volt Meter |
41 | ASS + VSS |
42 | AUXILLARY CONTACTOR |
43 | Auto Manual Switch |
44 | 6A SP MCB |
45 | Transformer 415/220 |
46 | 6A DP MCB |
47 | 63 A FP MCB |
48 | CAPACITOR SECTION 8 stage APFCRELAY |
49 | 16A TP MCB |
50 | 32 A TP MCB |
51 | 40 A TP MCB |
52 | 63 A TP MCB |
53 | 18 A CONTACTOR |
54 | 12.5K VAR CAO DUTY CONTACTOR |
55 | 22.K VAR CAO DUTY CONTACTOR |
56 | 30.K VAR CAO DUTY CONTACTOR |
57 | CAPACTTOR 2 + 3+5+10+15+20+25 |
58 | AUTO MANUAL SWITCH |
59 | Job work for Repairing 200 HP Electric control panel Board and other mesclanius item etc of Intake WTP & Mid pumping station PANEL NO 1 370 A SOFT STARTER 630 A MCCB36KA TP LSIG T6N |
60 | SPEWADER T6 TP |
61 | ROM T6 |
62 | 400A SFU WITH FUSE |
63 | Ameter |
64 | Volt Meter |
65 | ASS + VSS |
66 | AUXILLARY CONTACTOR |
67 | Auto Manual Switch |
68 | 6A SP MCB |
69 | Transformer 415/220 |
70 | 6A DP MCB |
71 | 63 A FP MCB |
72 | CAPACITOR SECTION 8 stage APFCRELAY |
73 | 16A TP MCB |
74 | 32 A TP MCB |
75 | 40 A TP MCB |
76 | 63 A TP MCB |
77 | 18 A CONTACTOR |
78 | 12.5K VAR CAO DUTY CONTACTOR |
79 | 22.K VAR CAO DUTY CONTACTOR |
80 | CAPACTTOR 2 + 3+5+10+15+20+25 |
81 | AUTO MANUAL SWITCH |
82 | Job work for Repairing 70 HP Electric control panel Board and other mesclanius item etc of Intake WTP & Mid pumping station PANEL NO 1 105 A SOFT STARTER 250 A MCCB36KA TP LSIG T6N |
83 | SPEWADER XT4 TP |
84 | ROM XT4 |
85 | 160 SFU WITH FUSE |
86 | Ameter |
87 | Volt Meter |
88 | ASS + VSS |
89 | AUXILLARY CONTACTOR |
90 | Auto Manual Switch |
91 | 6A SP MCB |
92 | Transformer 415/220 |
93 | 6A DP MCB |
94 | CAPACITOR SECTION 8 stage APFCRELAY |
95 | 16A TP MCB |
96 | 32 A TP MCB |
97 | 40 A TP MCB |
98 | 63 A TP MCB |
99 | 18 A CONTACTOR |
100 | 12.5K VAR CAO DUTY CONTACTOR |
101 | 22.K VAR CAO DUTY CONTACTOR |
102 | CAPACTTOR 2 + 3+5+10+15+20+25 |
103 | AUTO MANUAL SWITCH |
104 | Provision for repairing of electrical accessories, fixtures,bulbs, tubelights , helogen lamps,CFL ,LED lights cable any other all electricity work as per requirements at Intake , WTP, Administrative bulildings etc complete including cost of all material, labour etc complete. |
105 | Disconnection & Discharging of 33 KV Transformer Sub Station from MPPKVVCL Site for maintenance |
106 | Providing and fitting 33 KV D.O. Fuse |
107 | Transformer oil |
108 | Providing and replacement ofPost insulator |
109 | Providing and replacement of33 KV pin insulator with G.I. pin |
110 | Hireing of transformer at village Behadwa 315 kva and Kharpai 500 kva including loading unloading transportation rate as par MPPKVV ltd. HT cell Indore |
111 | Provision for leakage repairing of cisterns including cleningproviding & fixing water taps and required GI fittings complete. |
112 | Provision for Cleaning of over head tank , Sumpwell, Intakewell, settling tank etc. (two times per year OHT& Sumpwell, Intakewell one time every year) (I) Intake Well Cleaning 20×4=80 Labour (II) OHT Tank 4×1=4 Labour Sumpwell 6×1=6 Labour |
113 | Earth work in excavation for foundation, trenches for pipes/ cables, drains or in well excavation etc. by mechanical means/ manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. All kind of soil. SOR Item No.15.6 Page No.257 |
114 | Earth work in excavation for foundation, in building works etc. by mechanical means/ manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed Ordinary rock or soft rock with or without blasting SOR Item No.15.7.3 Page No.258 |
115 | Pumping out water caused by springs, tides or river seepage, broken water mains of drains or the like SOR Item No.15.10 Page No.258 |
116 | Filling available excavated earth in trenches, plinth sides of foundation in layers not exceeding 20cm. in depth including consolidation of each layer by ramming watering, lead up to 50m and lift up to 1.5m in all kinds of soils. SOR Item No.15.11Page No.258 |
117 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of Engineer-inchargeNominal concrete 1:3:6 or richer mix (i/c equivalent design mix) PHE SOR item no. 15.18.1/ 25950x0.5x0.2 = 251 |
118 | Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering 1:1½:3 (M-20) SOR Item No.15.13.1.3 Page No.260 |
119 | Providing & laying mechanically mixed R.C.C. Providing & laying mechanically mixed R.C.C. excluding centering & shuttering and reinforcement in foundation/plinth (20mm graded metal)SOR Item No.15.32.1Page No.261 |
120 | Providing and placing in position cold twisted steel and hot rolled deformed steel reinforcement for R.C.C. work i/c cutting, bending, binding etc. complete i/c cost of binding wire and wastage. Sub Structure .SOR Item No.15.34.1 Page No.261 |
121 | Providing & fixing form work i/c centering and shuttering including strutting, propping etc. and removal of form work for:Foundation, footing, bases of columns, etc for mass concrete SOR Item No.15.51.1 Page No.263 |
122 | Columns, pillars, piers, Abutments, posts and Struts SOR Item No.15.51.5 Page No.263 |
123 | Fabrication of M.S. pipes & specials as per IS specifications with inside & outside epoxy coating as per relevant IS code, duly tested for usage in Drinking water inclusive of all materials, inspection charges, transit insurance, loading/unloading, FOR site, & stacking etc. complete as for direction ofEngineer-in-Charge. SOR Item No.5.2 Page No.76 |
124 | Providing rigid welded joint to the following MS Pipe including testing of joints and cost of jointing material as per relevant approve specification complete250 mmSOR Item No.5.7.1.2 Page No. 76 |
125 | Providing rigid welded joint to the following MS Pipe including testing of joints and cost of jointing material as per relevant approve specification complete300 mm SOR Item No.5.7.2.2) Page No. 76 |
126 | Providing and laying in position following double socket cast iron 90° bend.80 mm Dia SOR Item 8.5.1 P-105 |
127 | 100mm Dia |
128 | 150mm Dia |
129 | 250mm Dia |
130 | 300mm Dia |
131 | Providing and laying in position following double socket cast iron 45° bend.80mm Dia SOR Item 8.5.1 P-106 |
132 | 100mm Dia |
133 | 150mm Dia |
134 | 250mm Dia |
135 | 300mm Dia |
136 | Providing and laying in position following all socket cast iron Tees (all sizes in Milimeters) Body x Branch Dia SOR Item 8.9.1 P- 107 80 mm x 80 mm |
137 | 100x100 |
138 | 150x150 |
139 | 250x250 |
140 | 300x300 |
141 | Providing and laying in position following cast iron collars80mm DiaSOR Item 8.13.1 P- 112 |
142 | 100mm Dia |
143 | 150mm Dia |
144 | 250mm Dia |
145 | 300mm Dia |
146 | Providing and laying in position including testing following cast iron flanged spigot (tail piece) 100mm Dia SOR Item 8.45 P-127 |
147 | 150mm Dia |
148 | 250mm Dia |
149 | 300mm Dia |
150 | Providing Rubber ISI marked Gasket (push on) joint as per IS-5382/85 to following DI pipes class K-7 and K-9 including testing of joints and cost of jointing materials (Rubber Gasket and soap solution etc.) 100 mm dia SOR Item 1.5 P-4 |
151 | 150 mm dia |
152 | 250 mm dia |
153 | 300 mm dia |
154 | Providing & fixing following ductile iron single chamber triple function temper proof air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991, class PN 1.0SOR Item no. 1.5 P-24-2550 mm dia |
155 | 80 mm dia |
156 | Providing and Laying including testing Ductile iron Mechanical joint collar with follower glands conforming to IS9523/2000 having dimension as per table 24 of IS-9523/2000 in the following nominal diameter/sizes with external bitumen and internal cement mortar lining. 100 mm diaSOR Item no. 1.11 P-7 |
157 | 150 mm dia |
158 | 250 mm dia |
159 | 300 mm dia |
160 | Providing, Solvent Cement Joints to PVC Pipes and fittings of 6, 8 and 10 kg/cm2 Pressure including testing of joints and cost of jointing materials (i.e. socket, coupler & solvent cement) 90 mm diaSOR Item no. 4.3.1 P-65 |
161 | 110 mm dia |
162 | Provision for Repairing of old existing CI/DI Sluice Valve i/c repairing of spindle, check nut, changing of gland,lathe work as per requirement, changing of nut bolt, rubber sheet etc. complete as per approved specification and as directed by Engineer in charge. (Rate sanctioned as per Nayan Scheme Ratlam Contract no.03/2019-20 Dt.28-06-2019) |
163 | Provision for Repairing of old existing Air Valve i/cchanging of balls ,nut bolt, rubber sheet etc. complete as per approved specification and as directed by Engineer in charge. (Rate sanctioned as per Nayan Scheme Ratlam Contract no.03/2019-20 Dt.28-06-2019) |
164 | Providing, laying and jointing following socket and spigot cast iron (Spun) Pipes including testing of joints, cost of pipes and jointing materials etc. Complete. 80mm Dia Class LA SOR Item no. 8.1.1 P-103 |
165 | Providing, laying and jointing including testing following socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (class K-9) conforming to IS 8329/2000 with suitable Rubber Gasket (Push on) joints as per IS:5382/85100 mm diaSOR Item no. 1.1.1 P-3 |
166 | 150 mm dia |
167 | 250 mm dia |
168 | 300 mm dia |
169 | Providing lead caulked joints to following socket & spigot cast iron (spun) pipes and specials class "LA" "A" and "B" including testing of the joints and cost of jointing materials (i.e. pig lead and spun yarn) etc. complete. 80 mm dia SOR Item no. 8.3 P-104 |
170 | 100 mm dia |
171 | 150 mm dia |
172 | 250 mm dia |
173 | 300 mm dia |
174 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete Class PN 10.80 mm diaSOR Item no. 1.41 P-22 |
175 | 100 mm dia |
176 | 150 mm dia |
177 | 250 mm dia |
178 | 300 mm dia |
179 | Supply of Woltman Turbine Bulk meters class B, multi jet, magnetically coupled as per specifications conforming to IS : 770/1994, ISO 4064/1 and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications and drawings including all taxes. SOR Item No. 13.1.9 Page No.225 250 mm Dia |
180 | Supply of Woltman Turbine Bulk meters class B, multi jet, magnetically coupled as per specifications conforming to IS : 770/1994, ISO 4064/1 and EEC approved, including transportation to site, storage, safety, installation, testing, commissioning, making connections with existing pipeline, including excavation at site, dewatering and reinstating the same after completion of installation as per specifications and drawings including all taxes. SOR Item No. 13.1.10 Page No.225 300 mm Dia |
181 | Provision for Repairing of Starter/control panel i/c cost of material, labour, transportation etc. complete as per approved specification and as directed by Engineer in charge SOR Item No. 14.29 Page No.241 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail