}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 41012477

    • Tender For Augmentation Water Supply System And Construction Of 2Nd Water Works In Village Kural Distt. Bhiwani, “Raw Water Arrangement: Const Of Sump Well, Pump Chamber, Boundary Wall, Cc Road, Supply And Erection Of Pumping Machinery, Laying Of Raw Wate, Bhiwani-Haryana

    Public Health Engineering Department-PHED has published Tender For Augmentation Water Supply System And Construction Of 2Nd Water Works In Village Kural Distt. Bhiwani, “Raw Water Arrangement: Const Of Sump Well, Pump Chamber, Boundary Wall, Cc Road, Supply And Erection Of Pumping Machinery, Laying Of Raw Wate. Submission Date for this Tender is 27-12-2023. Energy Meter Tenders in Bhiwani Haryana. Bidders can get complete Tender details and download the document.




    Tender Notice

    41012477
    Tender For Augmentation Water Supply System And Construction Of 2Nd Water Works In Village Kural Distt. Bhiwani, “Raw Water Arrangement: Const Of Sump Well, Pump Chamber, Boundary Wall, Cc Road, Supply And Erection Of Pumping Machinery, Laying Of Raw Wate
    Open Tender
    Indian
    Haryana
    Bhiwani
    27-12-2023

    Tender Details

    Tender For Augmentation Water Supply System And Construction Of 2Nd Water Works In Village Kural Distt. Bhiwani, “Raw Water Arrangement: Const Of Sump Well, Pump Chamber, Boundary Wall, Cc Road, Supply And Erection Of Pumping Machinery, Laying Of Raw Water Rising Main, Water Works: Const Of 2 Nos Sands Tank, 2 Nos Cwt, Pc, Rw And Cw Section Well, Boundary Wall, 4 Nos. Filter Beds, 2 Nos. Hlt, Cc Road And Path, Toilet And Washroom, Ht Metering Panel Room Laying Of Pipe Line At Head Works, Supply And Erection Of Pumping Machinery At Water Works And Existing Boosting Stations, Laying Of Rising Main For Existing B / Stns And Laying Of Distribution System In Village Kural Complete Including 3 Months Trail Run Period One Year Defect Liability And Thereafter Five Year Oandm And All Other Works Contingent Thereto

    Key Value

    Document Fees
    INR 15000 /-
    EMD
    INR 751980.0 /-
    Tender Value
    INR 3.75 Crore /-

    BOQ Items

    Name of Work: KURAL VILLAGE AUGMENTATION WATER SUPPLY SYSTEM AND CONSTRUCTION OF 2nd WATER WORKS IN VILLAGE KURAL DISTT. BHIWANI, “Raw water Arrangement: Const of Sump well, Pump Chamber, Boundary wall, CC Road, supply and erection of pumping machinery, Laying of raw water rising main, Water works: Const of 2 Nos SandS tank, 2 Nos CWT, PC, RW and CW Section well, boundary wall, 4 Nos. Filter beds, 2 Nos. HLT, CC Road and path, Toilet and washroom, HT Metering panel room Laying of pipe line at Head works, Supply and erection of pumping machinery at water works and existing boosting stations, laying of rising main for existing B/Stns and laying of distribution system in village Kural complete including 3 months trail run period one year defect liability and thereafter five year OandM and all other works contingent thereto”.
    Sl. No. Item Description
    1Provision for Providing and fixing CI pipes, Specials and DI Sluice, NRV of required make i.e. IVC /VAG to be installed inside pump chamber for making connection with proposed pumping machinery complete in all respect.
    2Panel Boards for Motors Supply, erection, testing and commissioning of wall mounted electrical L.T panel Board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items complete in all respect as per approved NIT. For Raw water pump sets for 1900 LPM x 50 Mtr. Head = 2 No. a) Main switch 100 Amp 1 No. (LandT, Siemens, ABB) b) Volt Mtr. 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA?LandT) c) Amp.mtr. 100x100mm range 0 to 100 Amp. 1 No. (AE/KAPPA/LandT) d) CT 100/1 No. (AE/KAPPA/LandT) e) VSS 1 No. and ASS 1 No. each of approved make f) SPP 1 No. approved make g) Motor starter , star delta 1 No. for 1900 LPM x 50 Mtr. head motor (LandT, Siemens, ABB) h) Capacity of suitable capacity i) Indicating Lamp- j) Change over switch Amp
    3Supplying, erection, testing and commissioning or Horizontal motor pumping set or Raw Water having head 50.00 m as requirements of discharge in LPM and power capacity in BHP Make: KSEB, CRI, Kirlosker, Crompton Greeve, Lubi) 1900 LPM x 50 Mtr. Head x 35 BHP
    4Panel Boards for Motors Supply, erection, testing and commissioning of wall mounted electrical L.T panel Board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items complete in all respect as per approved NIT. For clear water pump sets for 1050 LPM x 40 Mtr. Head = 2 No. a) Main switch 100 Amp 1 No. (LandT, Siemens, ABB) b) Volt Mtr. 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA?LandT) c) Amp.mtr. 100x100mm range 0 to 100 Amp. 1 No. (AE/KAPPA/LandT) d) CT 100/1 No. (AE/KAPPA/LandT) e) VSS 1 No. and ASS 1 No. each of approved make f) SPP 1 No. approved make g) Motor starter , star delta 1 No. for 1050 LPM x 40 Mtr. head motor (LandT, Siemens, ABB) h) Capacity of suitable capacity i) Indicating Lamp- j) Change over switch Amp
    5Supplying, erection, testing and commissioning or Horizontal motor pumping set or Raw Water having head 20.00 m as requirements of discharge in LPM and power capacity in BHP Make: KSEB, CRI, Kirlosker, Crompton Greeve, Lubi) 1100 LPM x 20 Mtr. Head x 10 BHP
    6Panel Boards for Motors Supply, erection, testing and commissioning of wall mounted electrical L.T panel Board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items complete in all respect as per approved NIT. For raw water pump sets for 1100 LPM x 20 Mtr. Head = 2 No. a) Main switch 100 Amp 1 No. (LandT, Siemens, ABB) b) Volt Mtr. 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA?LandT) c) Amp.mtr. 100x100mm range 0 to 100 Amp. 1 No. (AE/KAPPA/LandT) d) CT 100/1 No. (AE/KAPPA/LandT) e) VSS 1 No. and ASS 1 No. each of approved make f) SPP 1 No. approved make g) Motor starter , star delta 1 No. for 1100 LPM x 20 Mtr. head motor (LandT, Siemens, ABB) h) Capacity of suitable capacity i) Indicating Lamp- j) Change over switch Amp
    7Panel Boards for Motors Supply, erection, testing and commissioning of wall mounted electrical L.T panel Board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items complete in all respect as per approved NIT. For clearwater pump sets for 600 LPM x 20 Mtr. Head = 2 No. a) Main switch 100 Amp 1 No. (LandT, Siemens, ABB) b) Volt Mtr. 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA?LandT) c) Amp.mtr. 100x100mm range 0 to 100 Amp. 1 No. (AE/KAPPA/LandT) d) CT 100/1 No. (AE/KAPPA/LandT) e) VSS 1 No. and ASS 1 No. each of approved make f) SPP 1 No. approved make g) Motor starter , star delta 1 No. for 600 LPM x 20 Mtr. head motor (LandT, Siemens, ABB) h) Capacity of suitable capacity i) Indicating Lamp- j) Change over switch Amp
    8Panel Boards for Motors Supply, erection, testing and commissioning of wall mounted electrical L.T panel Board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items complete in all respect as per approved NIT. For clear water pump sets for 1100 LPM x 40 Mtr. Head = 2 No. a) Main switch 100 Amp 1 No. (LandT, Siemens, ABB) b) Volt Mtr. 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA?LandT) c) Amp.mtr. 100x100mm range 0 to 100 Amp. 1 No. (AE/KAPPA/LandT) d) CT 100/1 No. (AE/KAPPA/LandT) e) VSS 1 No. and ASS 1 No. each of approved make f) SPP 1 No. approved make g) Motor starter , star delta 1 No. for 1100 LPM x 40 Mtr. head motor (LandT, Siemens, ABB) h) Capacity of suitable capacity i) Indicating Lamp- j) Change over switch Amp
    9Operation and Maintenance for complete scope of work mentioned in the DNIT (Disinfection material supplied by PHED) as per schedule-IV for a period of 5 year after 12 month during defect liability period and 03 Months trial run period will be charged to the A/Mtc. estimate complete in all respect as per approved NIT. (i) Operation and Maintenance during defect liability period (Operation only) after 3 month trial run period.
    10(ii) Operation and Maintenance during 1st year after defect liability period.
    11(iii) Operation and Maintenance during 2nd year.
    12(iv) Operation and Maintenance during 3rd year.
    13(v) Operation and Maintenance during 4th year.
    14(vi) Operation and Maintenance during 5th year.
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail