Military Engineer Services-MES has published Tender For Repairs To Certain Map Steel Furniture Of Married Dus Under Ge (Nb) Visakhapatnam. Submission Date for this Tender is 22-12-2023. Furnitures Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Top and replacing the same with new Table top made of 18mm thick prelaminated MDF board, exterior grade of size 450mm x 450mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 2 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Sides and replacing the same with new Sides made of 18mm thick prelaminated MDF board, exterior grade of size 432mm x 450mm fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 3 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Front Face of upper Drawer and replacing the same with new Front Face of upper Drawer made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 100mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 4 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Sides of upper Drawer and replacing the same in position with new Sides of upper Drawer of 12mm thick plywood, BWR, Grade BB of size 380mmx100mm duly fixed with sides and top with adhesive and headless nail all as shown on drawing, complete all as specified and directed.FD/E6/MAP/15 OR 15[R] |
| 5 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Front Face of Lower Drawer and replacing the same with new Front Face of Lower Drawer made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 332mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 6 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Back Top and replacing the same with new Back Top made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 82mm duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 7 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Back Ply and replacing the same in position with new Back Ply made of 6mm thick Plywood, BWR garde of size 450mm x 450mm, fixed with adhesive and headless nail all as shown on drawing, complete all as specified and directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 8 | S & F in repair 100mm size, Stainless Steel Handle, 8mm dia fixed with internal metal screws, fixed to various type of furniture article complete all as specified and directed. |
| 9 | S & F in Repairs Stainless Steel Telescopic Channel of 12 inch long fixed to bottom of drawer/key board of various furniture articles complete all as per existing size and specification and all as shown on drawing, complete all as specified and directed.(Drg No. FD/E6/MAP/15 OR 15[R], FD/E6/MAP/03) |
| 10 | S & F in repair 50mm dia, Hard Rubber bush, 2 inch high and fixed with MS screws to various type of furniture article complete all as specified, shown on drawing and as directed. |
| 11 | M & L for painting to steel surfaces of TABLE BED SIDE STEEL with two coats of synthetic enamel paint of approved 1st quality by spray machine to match with existing colour/shade after preparation of surfaceand fill uneven surfaces with putty complete all as directed by Engineer-in-charge and as specified. (Drg No. FD/E6/MAP/15 OR 15[R]) |
| 12 | M & L for repair to various type steel furniture by taking down/removing the existing broken /unserviceable rusted mild steel flat iron strip from the furniture articles fixed in any positions carefully and S & F new mild steel flat iron strip of size and length as per the existing one fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to new surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/MAP-II/01) |
| 13 | M & L for repair to various type steel furniture by taking down/removing the existing broken /unserviceable rusted mild steel gusset plate from the furniture articles fixed in any positions carefully and S & F new mild steel gusset plate as per the existing one fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to new surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/MAP-II/01) |
| 14 | M & L for Repairs to CHARPOY IP HARD TOP by taking down the existing broken /unserviceable rusted frame and replacing the same in position with new Frame made of 25mm dia mild steel pipe of 16 Gauge thick as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed.(Drg No. FD/MAP-II/01) |
| 15 | M & L for repair to CHARPOY IP HARD TOP by tightening of all loose joints etc including replacement of worn out nuts, bolts, washers etc to retain the stability of bed complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/MAP-II/01) |
| 16 | M & L for Repairs to CHARPOY IP HARD TOP by taking down the existing broken /unserviceable plywood top and replacing the same with new top made of 8mm thick BWR Plywood graed-AA of size 1880mmx900mm duly fixed in position with 12 Nos of 50mm long 8mm dia flat headnut, bolts and washers, made to shape and size all as shown on drawing, as specified and as directed.(Drg No. FD/MAP-II/01) |
| 17 | M & L for Painting to steel surfaces of CHARPOY IP HARD TOP with twos coat of synthetic enamel paint of approved quality with spray machineafter preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth complete all as shown on drawing, as specified and as directed.(Drg No. FD/MAP-II/01) |
| 18 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Door Shutter carefully without disturbing the adjoining partsSupply and fixing of new Door Shutter made of 1 mm thick MS sheet of same size 500x1760mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 19 | S & F in repair Lock, 100mm size, 6 lever lock, brass with duplicate keys fixed variour type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 20 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Handle from shutter carefully without disturbing the adjoining partsSupply and fixing of new Handle, 130mm size, chromium plated complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 21 | S & F in repair Lock, 65mm size, 4 lever lock, brass with duplicate keys fixed variour type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 22 | S & F in repair Handle, 100mm size, chromium plated fixed to various furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 23 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Bottom Shelf carefully without disturbing the adjoining partsSupply and fixing of new Bottom Shelf made of 1 mm thick MS sheet of same size 500x975mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 24 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Internal Shelf carefully without disturbing the adjoining partsSupply and fixing of new Internal Shelf made of 1 mm thick MS sheet of same size 450x950mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 25 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Box Cover carefully without disturbing the adjoining partsSupply and fixing of new Box Cover made of 1 mm thick MS sheet of same size 250x120mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 26 | S & F in repair 20mm dia hanging/curtain rod, 1.25mm wall thickness, chromium plated with and including CP end socket/bracketfixed with screws to various type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 27 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Leg carefully without disturbing the adjoining partsSupply and fixing of new Leg made of 1.25 mm thick MS sheet of same size 100(W)x450(L)x140(H)mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 28 | S & F in repair mild steel Hinge 80mm long duly welded to various type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/18) |
| 29 | M & L for preparation of old painted steel surface of Almirah Large Steel with shelves filling metal putty to the uneven surfaces and remove the all dust etc with a fine cloth and applying spray painting with one coat of synthetic enamel paint (1st quality) of approved make as per existing shade externally and internally including tightening of all loose hinges etc complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user"s requirement) (Drg No. FD/E6/MAP/18) |
| 30 | M & L for Repairs to RACK SHOE STEEL by taking down the existing broken /unserviceable rusted Bottom Part of Leg and replacing the same in position with new Bottom Part of Leg made of 25mm dia mild steel pipe of 18 Gauge thick as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed.(Drg No. FD/E6MAP/02 OR 02[R]) |
| 31 | M & L for Repairs to RACK SHOE STEEL by taking down the existing broken /unserviceable rusted Wire Mesh (Jali) Shelf and replacing the same in position with new Wire Mesh Shelf of size 300x700mm made of 3mm dia mild steel rod mesh size as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed.(Drg No. FD/E6MAP/02 OR 02[R]) |
| 32 | S & F in repair Hard PVC shoe of best quality as per the existing size and specifications, fixed to various type of chiars complete all as specified and directed. |
| 33 | M & L for repair to steel furniture by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded and applying one coat of red oxide zinc chrome primer to welded surfaces complete all as shown on drawing, as specified and directed. |
| 34 | M & L for preparation of old painted steel surface of RACK SHOE STEEL filling metal putty to the uneven surfaces and remove the all dust etc with a fine cloth and applying spray painting with one coat of synthetic enamel paint (1st quality) of approved make as per existing shade externally and internally including tightening of all loose hinges etc complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user"s requirement) (Drg No. FD/E6MAP/02 OR 02[R]) |
| 35 | M & L for repair to CHAIR COMPUTER by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth, pressed foam cushion, elastic webbing tape, PVC lipping from each seat and back and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 200.00 per mtr fixed by using heavy duty gun tacker with PVC lipping complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01) |
| 36 | M & L for repair to CHAIR COMPUTER by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth with PVC lipping from each seat and back and fully upholstered by new tapestry cloth of approved colour and texture of rate not less than Rs. 200.00 per mtr fixed by using heavy duty gun tacker with PVC lipping complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01) |
| 37 | S & F in repair Arm Rests of same shape and size, made of black integral skin polyurethane with 75-85 shore "Á" hardness & reinforced with MS insert fixed to various type of Chairs complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01, FD/E6/MAP/12) |
| 38 | M & L for repair to CHAIR COMPUTER by taking down/removing the existing broken /unserviceable Castor twin wheels and S & F new Castor twin wheel suitable for chair computer complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01) |
| 39 | M & L for repair to CHAIR COMPUTER by taking down/removing the existing broken /unserviceable five spokes stainless steel adjustable pedestal assembly and S & F new five spokes stainless steel adjustable pedestal assemblycomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01) |
| 40 | M & L for repair to CHAIR COMPUTER by taking down/removing the existing broken /unserviceable hydraulic gas lift cylinder of chair and S & F new hydraulic gas lift cylinder to chair complete all as per the existing specificationscomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/01) |
| 41 | M & L for repair to CHAIR COMPUTER by painting to old steel surfaces of each Chair, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, One coats of synthetic enamel paint as per existing shade complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/01) |
| 42 | M & L for repair to CHAIR WRITTING by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth, pressed foam cushion, elastic webbing tape, PVC lipping from each seat and back and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape, PVC lipping and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 200 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/12) |
| 43 | M & L for repair to CHAIR WRITTING by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth PVC lipping from each seat and back and fully upholstered by using new tapestry cloth of approved colour and texture of rate not less than Rs. 200 per mtr fixed by using heavy duty gun tacker with PVC lipping complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/12) |
| 44 | M & L for repair to CHAIR WRITTING by painting to old steel surfaces of each Chair, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, One coats of synthetic enamel paint as per existing shade complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/12) |
| 45 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade of size 600x300mm and with 4mm teak wood edging all around the hand boardcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 46 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable One piece PVC seat and back and supply and fix new One piece PVC seat and back all as per the existing specifications and size complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 47 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable Foot Rest wire mesh and S & F new Foot Rest wire mesh duly welded to match with existing all as per the existing specifications and size complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 48 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by painting to steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer to complete including newly provided parts complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/05) |
| 49 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 50 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Telescopic channel andkey boardofTablecomputer and supply and fix new Telescopic channel and key board of size 400x500mm made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 51 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Mouse pad boardcomplete and supply and fix newmouse pad board of size 220x350mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 52 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable CPU stand part complete and supply and fix new CPU stand of size 450x300 made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 53 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Front of Drawer complete and supply and fix new Front of Drawer of size 100x225mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 54 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Bottom of Drawer complete and supply and fix new Bottom of Drawer of size 300x200mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 55 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Sides of Drawer complete and supply and fix new Sides of Drawer of size 300x100mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 56 | S & F in repair40mm dia, cupboard knobs of stainless steel, bright finishedfixed with screws to various type of furniture articlecomplete all as specified and directed. |
| 57 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Bottom Shelf complete and supply and fix new Bottom Shelf of size 810x300mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 58 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable leg buffer complete and supply and fix new nylon leg buffer of size and shape as per the existing one complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 59 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable PVC cover complete and supply and fix new PVC rectangular covermade to shape as per the drawing for bottom frames of size and shape as per the existing one complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 60 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Side complete and supply and fix new Side of size 150x610mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 61 | M & L for repair to TABLE COMPUTER by painting to old steel surfaces of each Chair, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, One coats of synthetic enamel paint as per existing shade complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/03) |
| 62 | M & L for repair to TEAPOY VERANDAH by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/17) |
| 63 | M & L for repair to TEAPOY VERANDAH by taking down/removing the existing broken /unserviceable Base Tray carefully and supply and fixing new Base Tray of size 400mmx700mm made of 5mm dia mild steel rod jalli (12x10 Nos) duly welded to the frame and applying one coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/17) |
| 64 | M & L for repair to TEAPOY VERANDAH by painting to steel surfaces of each Teapoy by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/17) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
