|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm all as specified and as directed |
| 2 | Demolishing cement concrete manually/ by mechanical means in any description including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) all as specified and as directed |
| 3 | Providing and laying Non skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.all as specified and as directed |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles of Size 450x300/450x350 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, sub base etc., up to floor five level, excluding the cost of centering, shuttering andfinishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) all as specified and as directed |
| 6 | Providing and laying in position cement concrete of specified grade for sunken floor, sub baseexcluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) all as specified and as directed |
| 7 | M & L for providing and laying water proofing treatment to sunken portion of WCs , Bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003. The following procedures to be adopted during the execution of work :(i)Cleaning the sunken /lowered portion of RCC slab surface for full depth of sunken floor by wire brush , Chisel out any mortar sticking the surface, All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out .One 40 mm dia PVC pipes , 35 cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion(ii) Applying FOSROC Nitoproof 600PF (Minimum 0.8 mm dft ) over a priming coat of Nitoproof WB primer or Equivalent product of Asian paints , M/s MC Bauchemic / CIPY/ SIKA/ Pidilite Dr Fixit / Thermax/STP applied as per manufacturer,s Instructions to bottom and full vertical sides of sunken floors . |
| 8 | (iii) Fill it with water and check for dampness and seepage . In case the slightest indication of seeepage / leakage is noticed , the same shall be rectified by injection grouting to seal all cracks or application of Polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie/ CIPY/ SIKA/ Pidilite Dr Fixit / Asian paints / Thermax / STP admixed with Integral WPCor Cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any : and this shall be done by contractor at his own cost(iv) Apply additional coat of FOSROC Nito proof 600 PF or equivalent or Asian paints / M/sMC Bauchemie/ CIPY/ SIKA/ Pidilite Dr Fixit / Asian paints / Thermax / STP.(v) All junction points of side walls whereCI/ GI pipes are passing through shall be sealed with epoxy cement mortar .Note : (i) The sunken slab sloped towards outer face so as the drain the water to GI spout pipe (ii) Covingshall be provided at the junction of slab with the wall (iii) Nahni trap shall be 10 mm below finished floor level .Ensure the drain of pipe dia is larger than the Nahni trap size (iv) The outer end of the spout should be chamfered |
| 9 | Providing and fixing in repairs white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete all as specified and as directed |
| 10 | Supply and fix in repairshealth faucet(ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed |
| 11 | Providing and fixing in repairs of CP two waybib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal borecomplete all as specified and as directed |
| 12 | S& F , in repairs of Stop valvesfancy type, chromiumplated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed |
| 13 | Providing and fixing in repair of CP urinal cock / spreaderin repairs of approved quality and 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms complete all as specified and as directed |
| 14 | Providing and fixing in repair of uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore complete all as specified and as directed |
| 15 | Providing and fixing in repair of Vitreous chinaurinal partitions with necessary fittingsas per direction of Engineer-in-charge |
| 16 | S&F vitreous chinacounter top/Countersunkwash basin in circular / oval shape,white of size 560x400mm placed on granite platform complete all as specified and as directed |
| 17 | S & F, in repairs of Fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 18 | Providing and fixing in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)only including connections to flushing pipe and outgoing pipes fixed complete all as specified and as directed |
| 19 | Providing and fixing in repair of P.V.C. waste pipe for sink or wash basin in repairs including P.V.C. waste fittings complete Flexible pipe - 32 mm dia complete all as specified and as directed |
| 20 | Providing and fixingin repair of CPWaste Coupling for wash basin and sink, of approved quality and colour Waste coupling 32 mm dia of 125 mm length complete all as specified and as directed |
| 21 | Dismantling 15 to 40 mm dia G.I./PVC pipe exposed on wall including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge. |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .size of 25 mm internal dia. for External work ,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 15 mm dia bore Concealed work, including cutting chases and making good the walls etc. having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 24 | All as per item No.22 here-in-before but of size of 20 mm internal dia concealed work complete all as specified and as directed |
| 25 | Providing and fixing in repair of mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm complete all as specified and as directed |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed |
| 27 | Providing and fixing 18-20 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size ofArea of slab over 0.50 sqm, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.complete all as specified and as directed |
| 28 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete all as specified and as directed |
| 29 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below complete all as specified and as directed |
| 30 | Providing and fixing factory made single extruded WPC Frame size 45 x 70 mm(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed |
| 31 | Providing and fixing factory made single extruded WPC 30 mm thick (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 32 | S & F in repair of PVC (SWR) floor trap, 75 mmplain with grating including jointing with solvent cement complete all as specified and as directed |
| 33 | Taking down eaves gutters, PVC pipesand rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed |
| 34 | S & F PVC (SWR) pipes 75 mm single socketed including bends,elbows and all fittingsin any length with rubber ring joints, fixed towalls and laid in trenches complete all as specified and as directed |
| 35 | S & F PVC (SWR) pipes 110 mm single socketed including bends,elbows and all fittingsin any length with rubber ring joints, fixed towalls and laid in trenches complete all as specified and as directed |
| 36 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 110 mm complete all as specified and as directed |
| 37 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 38 | Providing and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : for fixed portion complete all as specified and as directed |
| 39 | Providing and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) complete all as specified and as directed |
| 40 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 41 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed |
| 42 | M& L for Cement plaster 1:4 (1 cement: 4 fine sand) finished with aneat cement - 10 mm cement plaster complete all as specified and as directed |
| 43 | M& L for Cement plaster 1:3 (1 cement: 3 fine sand) finished with aneat cement - 5 mm cement plaster on ceiling complete all as specified and as directed |
| 44 | M& Lfor White washing with lime to give an even shade :anOld work (two or more coats) complete all as specified and as directed |
| 45 | Removing excavated/demolished material exc 5.0KM but not exc 10 Kmand depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 46 | Cutting holes of required size in brick masonry wall for fixing of hold fast including providing and fixing hold fast and making good the brick work and plastering etc. complete as per direction of Engineer-in-charge. |
| 47 | S&F Steel work In gratings, frames, guard bar, ladder, railings, hinges, brackets, gates and similar works welded in built up sections/ framed work, including cutting, hoisting, fixing in position with suitable locking arrangements with sliding bolts etc and applyinf a shop coat of primer complete as per direction of Engineer-in-charge. |
| 48 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete as per direction of Engineer-in-charge. . |
| 49 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved colour/shade over a coat of red oxide primer complete as per direction of Engineer-in-charge. |
| 50 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 51 | Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm thicknessof approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S.sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 52 | Filling the gap in between aluminium frame & adjacent RCC/Brick/Stone work upto 5mm depth and 5mm width by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 53 | Providing and fixing 100x70x4 mm (ordinary type)chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete all as specified and directed |
| 54 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete all as specified and as directed |
| 55 | S&F premium quality venetian blinds in any colour and design for windows and removel of existing blinds complete all as specified and approved by Engineer-in-charge |
| 56 | Earth work in excavation in all kinds soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
| 57 | M&L Soling (or sub base) 200mm thickness with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed |
| 58 | Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) all work up to plinth level excluding the cost of centering and shuttering complete all as specified and directed |
| 59 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 60 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete all as specified and directed |
| 61 | Providing and fixing up to floor five level precast cement concrete solid block 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete all as specified and directed |
| 62 | Providing 15 mm cement plaster in fine sand on the rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) complete all as specified and directed |
| 63 | Finishing walls with water proofing cement paint of required shade on New work (Two or more coats applied @ 3.84 kg/10 sqm) complete all as specified and directed |
| 64 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). |
| 65 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete all as specified and directed |
| 66 | M&L for Painting on wall surface with synthetic enamel paint of approved brand and manufacture to give an even shadewith two or more coats on new work complete all as specified and directed |
| 67 | M&L for 25 mm thickCement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified & directed. |
| 68 | M&L for Double charged Vitrified floor tiles of size600mmX600mmX10mm thick with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etccomplete all as specified and directed |
| 69 | All as per item no.67 above but as in skirting including 12 mm thick screed bed in CM 1:3 complete all as specified and directed |
| 70 | Providing and laying Non skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete all as specified and directed |
| 71 | Demolitionofreinforce concreteRoofs,floors, beams, staircases, landing, chajjas, cooking plaform and similar suspended work complete all as specified and directed |
| 72 | M&L for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed |
| 73 | M &L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) flat complete all as specified and directed |
| 74 | M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all n.exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified and directed |
| 75 | M & L for Thermo-Mechanically Treated bars of grade Fe-500D or more as in steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and directed |
| 76 | Providing and fixing C.P. brass stop cock (concealed) in repairs of standard design and of approved make conforming to IS:8931 15 mm nominal bore complete all as specified and directed |
| 77 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete all as specified and directed |
| 78 | Providing and fixing Stainless steel towel rail complete with brackets fixed to wall with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,weighing not less than 190 gms complete all as specified and directed. |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .size of 40 mm internal dia.(Exposed on wall),having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 80 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 500L, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including removal of old one complete all as specified and directed |
| 81 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore complete all as specified and directed |
| 82 | Cutting into existing man holes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, internal dia of pipe 150mm complete all as specified and directed |
| 83 | Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro edge light weight calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondaryintermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 84 | M & L for preparation of Distempering 02 coats with oil bound washable distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primeron false ceiling all as specified and directed by EIC. |
| 85 | Dismantling of 40 to 100 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 86 | Providing and fixing 50mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 87 | Providing and fixing 80mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 88 | Providing and fixing 100mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 89 | Demolition of PCC of any description and in any position as in sunken floor/pcc bed including removal debaries upto a distance of 500 meter from the building all as specified and directed by Engr-in-Charge. |
| 90 | M&L for cement concrete Type D2 1:4:8 using 40 mm graded aggregate as in lean concrete complete all as specified and as directed |
| 91 | M/L for rendering 15 mm thick in CM 1:4 on fair fashes of brick work or concrete surfaces finished even and smooth without using extra cement using water proofing compound (Water proofing compound will be measured and paid separately) complete all as specified and as directed |
| 92 | M & L water proofing treatment to the sunken portionwith follwoing stepms :- (i) removing of exiting treatment including cleaning with wire brush (ii) applying 02 coats of brush bond of FOSROC company or equivalent, second coat will be applied after complete drying of first coat or after 24 hours (iv) Sunken floor kept ponded with water for minimum 48 hours (v) one 450mm long 32 mm dia spout pipe of CPVC and to slop. Note :- BRUSH BOND MUST BE APPLIED as per manufectrere\"s instructions. |
| 93 | Supplied only integral water proofing compound |
| 94 | Material and labour for PCC 1:2:4 Type B-1, 40 mm thick using 20 mm graded stone aggregate as in flooring finished fair and even complete all as specified and as directed |
| 95 | M/L for Non-skidceramic tiles (Coloured) 300x300mmx7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 96 | S & Fixing decorative LED bollard fitting 10 watt suitable for IP 65 ratedwith soft 360 light distribution.with complete all fixing arrangement all as specified and directed. |
| 97 | S & Fixing decorative LED Post top fitting 40 watt suitablefor 360 degreeindirect light with IP 65 protection Resistance to impect and corrosion Glare-free and better uniformity with complete all fixing arrangementall as specified and directed. |
| 98 | M & L for PCC (1:3:6) type C1 using 20 mm graded aggregrate for making the blocks suitable for fixing of post top lantern/Bollard light fittings allasrequiredat site includingallconnections as specified and directed . |
| 99 | Supply and fix pole mounted junction box (street light boxes) Top hinged Door fixed with hinbges on top of size 275mm x 135 x 110mm made out of FRP sheet with weather proof, locking arrangements vertical operated with one No. 6 /10 Amps MCB SP, EPOXY. Technical connector upto 8 ways, fixed on pole with 25mm x 3mm MS flat iron clamps and painting with two coats of synthetic enamel paint over one coat of red oxide primer for fixing clamps all as specified and directed inlcuding dismantling of existing u/s loop-in-box. |
| 100 | Material and labour for Street light LT Panel of size 75 cm x 60 cm x 40 cm out door dust & vermin proof front opening made out of 2.0 mm thick MS sheet duly painted and consisting with aluminium bus bar 3 phase and neutral 4 Nos 200 Amp fixed on insulators and one MCB TP 40 Amp,programmable time switch 1 No including necessary fixed in PCC 1:3:6 using 20 mm graded stone aggregate including danger plate etc complete all as specified and directed. |
| 101 | Supply and Laying 80 mm, `light grade\", galvanised Iron tube, with all fitting; laid in trenches for road crossing of cable complete all as specified and directed. |
| 102 | M&L for Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required 15 A power plug complete all as directed. |
| 103 | Supplying and fixing metal box of 180mm x100 mm x60 mm deep (nominal size) on surface or in recess with size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc, as required. complete all as specified and directed. |
| 104 | Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed. . |
| 105 | Supply & fix pedestal fans 230 volts single phase oscillating 450 mm sweep complete all as specified and directed. |
| 106 | M&L for Wiring for following light/ power plug with 2X1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required for 5 A socket on independant board complete all as directed. |
| 107 | Supplying and fixing metal box of 150mm x75 mm x60 mm deep (nominal size) on surface or in recess with size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc, as required complete all as specified and directed. |
| 108 | M&L for maintenance free chemical earthing complete with 900 mmx 600 mmx5 mm thick copper plate electrode of copper (76x3000) mm in which copper strip of (25x6) mm and 20 Kg of chemical bag with electrode buried dirct in ground vertically not less than 3 mtrs deep below ground level with connected to copper strip of size 25x6 mm as earthing lead by means of bolts, nuts and brazing, check nut and washers all as directed to test point including necessary excavation and earth work (in any type of strata) and providing chemicalmixed withvegitable soiland all around the electrode upto ground level 40 mm dia pipe Medium for earth strip protection upto 7.5 mtr, PCC (1:3:6) type C1 chember cast iron chember frame , heavy duty funnel and RCC cover all as directed. |
| 109 | Supply and fix test point terminal box made of gun metal or phosphorus bronze 75x75x25 mm, drilled and screwed including 3 Nos. 8 mm dia 25 mm long hex, head screw including jointing and jointing materials complete including taking out old test point terminal box all as directed. |
| 110 | M&L for earth continuity conductor or main earthing lead fixed to wall/on suitable insulators, on batten or recessed or chases or burried in ground or drawn in conduit /pipe or fixed to pole on any other indicated situation of size 32x6 mm copper strip all as directed. |
