|
| 1 | LABORATORY EQUIPMENTS FOR THE DEPARTMENT OF BIOTECHNOLOGY |
| 2 | Microbial orbital shaker incubator -bench top, microprocessor with LED display, temperature ranging from 4 to 60oC, 18 X 18 X 20 mm platform, 250-300 rpm, clamps for 1000 mL, 500 mL and 250 mL flasks |
| 3 | LABORATORY EQUIPMENTS FOR THE DEPARTMENT OF BOTANY |
| 4 | Water bath - 14 Ltr; 32 X 30 X 15 cm (4 racks) |
| 5 | Micropipette 100-1000uL |
| 6 | pH meter - pH Range: 0 to 14Measures pH & mVHigh AccuracyOne Touch CalibrationUp to 3-point Calibration |
| 7 | Glass Funnels with short stem 50 mm |
| 8 | Electronic Balance :Digital Readability: 0.001gRepeatability (Std. Deviation) : |
| 9 | Photoelectric colorimeter- 8 filters, Digital1ml sample volumeRange from 400 to 700nmAuto Zero Facility |
| 10 | Spathula stainless steel |
| 11 | Brush - To transfer sections of botanical specimens |
| 12 | Spirit lamp - glass |
| 13 | Test tube cleaning brush |
| 14 | Cover slip - Square 22mmX 22mm |
| 15 | Glass Rod |
| 16 | LABORATORY EQUIPMENTS FOR THE DEPARTMENT OF CHEMISTRY |
| 17 | Abbe refractometer (Bench top refractometer for the examination of refractometer indices and mean dispersion of liquids, solids and powder)ND range: N.D.1.3000 to N. D.1.7000 in steps on 0.001, Accuracy +/- 0.0002. Sugar percentage 0 to 95% in steps of 1 division, Accuracy +/- 0.5%, Temperature 0 – 100 deg C |
| 18 | Mini magnetic stirrer (stirring purpose only) |
| 19 | UV-Visible spectrophotometer |
| 20 | LABORATORY EQUIPMENTS FOR THE DEPARTMENT OF PHYSICS |
| 21 | Soldering Lead- 20SWG (500g) |
| 22 | Rising Table Apparatus with capillary tubes and stand (for surface tension expt) |
| 23 | Soldering Iron (30W) |
| 24 | Insulated PVC coated copper wire 24 AWG (single stranted) - 20 m each in 5 different colours |
| 25 | 1N4007 Diode |
| 26 | 6.2 V 2w, zenar diode |
| 27 | 6.2 V high wattage, zenar diode |
| 28 | BC107 NPN General Purpose Transistor |
| 29 | Resistors(1.5kO,1kO, 2.2kO, 3.3kO, 4.7kO, 10kO,15kO,22kO, 47kO, 100kO, 330kO, 1MO- 50 m each |
| 30 | Wire stripper/cutter |
| 31 | Dual Trace Cathode Ray Oscilloscope (CRO) (0-20MHz), Power : 230 V ± 10% 50 Hz 30W; Deflection factor -5 m V / div~20 V / div , max sensitivity 1mV/div |
| 32 | Digital multimeter CAT III 600 V safety, with Resistance, Capacitance, Voltage (ac and DC) and Current (ac and DC) measurements. V AC Range -600V, V DC Range 600 V, Ohms Range 40 MO, autoranging option preferable |
| 33 | Table lamp with LED bulb |
| 34 | Spirit level (small) |
| 35 | Galvanometer ( DC moving coil galvanometer) |
| 36 | Deflection magnetometer /Compass box |
| 37 | Electrolytic capacitors 1000micro Fared 50V |
| 38 | Prism(50 x50x50mm) |
| 39 | Potentiometer 10 wires Dimension 1.10 m x 100 mm x 50 mm |
| 40 | Spectrometer 1\" LC |
| 41 | Extension board with 6 sockets and Individual Switchs |
| 42 | Convex lens 10 cm focal length |
