|
| 1 | Demolition of brickwork or stone masonry built in cement mortar and archor pillars etc but excluding ashlar facings dressed stone work and pre cast concrete articles. |
| 2 | Material and labourfor Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 3 | Supply and fixingfor Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work incl hung as gates, incl pintle hinges, stops, hand made sliding bolts etc conforming to Fe.290.Gde-E-165, complete |
| 4 | Supply only Chain link MS galvanisd fencing, any size or type |
| 5 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 6 | Surface excavation n.exc 30cm deepand averaging 15 cm deep and getting out in soft soil complete all as spfd. |
| 7 | Excavating in post holes in sof/ loose soil (or similar holes) each n exc 0.5 cu m getting out, and removing surplus soil to a distance n exc 50 m andall as specified and as directed |
| 8 | Material and labourfor Cement concrete type D2 1:4:8(using 40mm graded stone aggregate) as in foundation filling and mass concrete |
| 9 | Material and labourCement Concrete 1:2:4 type B-2 (using 40 mm gradedcrushed stone agg as in foundation filling or for mass concrete complete all as specified and directed. |
| 10 | Supply and fixingRolled sections as in main and cross beams, Post ,hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe-410-W(Gde-E-250)quality A |
| 11 | Material and labourfor 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,including ridgesfixed with self tapping screws as specified. |
| 12 | Material and labourfor providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described and all as specified and directed. |
| 13 | Material and labourfor preparation of new or previously untreated steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 14 | Material and labourPCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base of floor finished even and rough to receive top layer and all as specified and directed. |
| 15 | Material and labourfor 40 mm thick PCC 1:2:4 typeB-1(using 20 mm graded mechanically crushed stone aggregate )as inflooring finished even and smooth using extra cement. |
| 16 | Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc and including removal of debris to out side of MD land. |
| 17 | Material and labour forPCC block masonry with solid blocks 1:3:6 type C1 using 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6complete. |
| 18 | Material and labourfor 15mm thick rendering in CM (1:4) on brick or concrete rete wallsurface finished even & fair without using extra cement as in Wall . |
| 19 | Material and labourfor 10mm thick rendering in CM (1:6) on brick or concrete rete wallsurface finished even & fair without using extra cement as in Wall. |
| 20 | Material and labourthree coats of white washing on walls including preparation of new plastered surface. |
| 21 | Material and labourtwo coats of distemperingon new plastered surface over a coat of primer including preparation of new surface. |
| 22 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 23 | Material and labourfor non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding .11 sqm but not exc. 0.18 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes |
| 24 | Material and labourfor glazed ceramic designer coloured tiles of size 300 X 200 X 7 mm thick as in vertical surface such asskirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tilesincl 10 mm thick plaster in CM 1:3 complete all as specified & directed |
| 25 | Supply and fixing for 10 Ltr high/low level cistern with brackets flush pipe etc complete and supply and fixing PVC low level cistern symphonic action type including inlet ball valve float and handle including brackets of approved make including all connection Supply and fixingflush pipes for EWC & Indian type WC. |
| 26 | Supply and fixingfor PVC connections 45 cm long incl 15 mm bore fly nuts on both ends complete |
| 27 | Supply and fixingfor Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Self-closing taps/stop cock, cast copper alloy, chromium plated, screwed for iron pipe and fixed waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) |
| 28 | Supply and fixingPVC flexibleWaste pipe 40 mm dia |
| 29 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in stone concrete block or slab walls. |
| 30 | Supply and fixing 15 mm CP fancy type Bib tap Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or forbrass ferrule and fixed |
| 31 | Supply and fixing 15 mm diafancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe |
| 32 | Supply and fixingin repairs Health faucet CP for iron pipes 15 mm bore with all accessories complete. |
| 33 | Supply and fixingfor 15 mm fancy typeCP stop cock/ Angle stop valve Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 34 | Supply and fixing vitreous china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type B-1 size 30 xm x 20 cm x 20 cm complete all as specified. |
| 35 | Supply and fixingvitreous china wash down water closet, pedestal pattern, white in colour incl white seat cover ISI marked \"P\" or \"S\" trap, fixing bolt and jointing. |
| 36 | Supply and fixing110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified. |
| 37 | Supply and fixing75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified. |
| 38 | Supply and fixing for PVC (SWR) bend 110 mm dia with access door |
| 39 | Supply and fixingin repairs for PVC (SWR) bend 75 mm dia with access door |
| 40 | Supply and fixingfor 75 mm CI floor trap with CP grating incl jointing to waste pipe incl fixed in cement concreteblock 30x30x30cm type B1 1:2:4 |
| 41 | Supply and fixingGI tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 42 | Taking up or down steel tubing and connector 15 mm bore in new or old position (wall ceiling floor etc) |
| 43 | Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete. |
| 44 | Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed. |
| 45 | Supply and spread ribbed soil in trenches, as in cable cushioning all as directed.Note :- Punned thickness will be considered for payment. |
| 46 | Material and labourfor Brick protection cover on cable with sub class \"B\" brick, laid dry and flat adjacent to each other complete all as specified. |
| 47 | Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for pathways / pole coping including necessary demolition and Cutting PCC/ road all as specified and as directed. |
| 48 | Material and labourfor G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings/culverts complete all as specified and directed. |
| 49 | Material and labour Boring of holes under road, pavement and hard standing by trenchless method by adopting horizontal boringusing ultra sound technique and necessarymachine including supply and insertion of HDPE pipe 50 mm dia suitable for 0.4 Mpa working pressure confirming to IS specified and as directed.Note:-Depth will not be less than 2m below the road, pavement and hard standing without damaging the road, pavement and hard standing. |
| 50 | Supply, laying, jointing & testing, XLPE insulated, armoured, heavy duty electric LT UG cable with multi stranded aluminium conductor, 1100 volts grade laid in trenches or in duct/passed through pipes or fixed to wall/poles etc cross sectional area of sizes 35sqmm 3.5core including taking down of unserviceable cable complete all as specified and directed. Make: Havells, Polycab, RPG Asian |
| 51 | Supply, laying, jointing & testing, XLPE insulated, armoured, heavy duty electric LT UG cable with multi stranded aluminium conductor, 1100 volts grade laid in trenches or in duct/passed through pipes or fixed to wall/poles etc cross sectional area of sizes 25sqmm 4core including taking down of unserviceable cable complete all as specified and directed.Make: Havells, Polycab, RPG Asian |
| 52 | Taking down street/security light fittings HPSV/HPMV/Halogen/LED/CFL/FTL fittings of any capacity or type from pole/wall after disconnection and connecting wires, carrying to store yard for necessary repair/replacement of spares etc. and refixing the same complete all as specified and directed. |
| 53 | Supply and fixing LED flood light fitting of 70watts pressure die cast housing with IP66 protection with efficient high output emitter LED for better distribution with all accessories prewired includingnecessary electric connection and bracket for fixing the fitting all including takingdown unserviceable old fitting as specified and as directed. ake: Philips/ Bajaj/ CG |
| 54 | Supply and fix street light terminal boxes factory made out of 1.6mm thick PVC with hinges and locking arrangement of size 300x200x100mm housing in and including 25x4mm bus bar of suitable length fixed on porcelian insulator with proper size of screw and one no of MCB SP 6 Amps, 240volts, in/out cable gland of suitable size of cables complete fixed on street light pole with nut, bolt and washers etc, complete all as specified and directed. |
| 55 | Supply and fixing in repairs non metallic rigid PVC conduit medium grade 20 mm dia ISI marked to be fixed on pole with all necessary fittings including clamps,bolts,nuts etc.complete all as specified and directed. |
| 56 | Supply, installation, testing and commissioning of smart street light control system using GSM/Lux based technology having12 KW 3 phase 32 amp load capacity per phase and can be operated by IVRS/SMS/lux based infrared sensor. Nature switch operation should be based on natural light lux level. Require illuminnance level for switching on is = 60 luxand for switching off = 10 lux. The smart unit should have 4 timers that can be set via SMS.Surge protection device (SPD) should provide protection agaist indirect lightning & switching surges. It should conform to IEC61643-11 and should have 40 KA capacity. The sensor & SPD along with suitable power contactors and incoming-outgoing MCCB/MCBs should be enclosed in a enclosure made of rust proof, electric shock proof , metal whether proof conforming to IP65 with angle iron frame of suitable size 04 Nos legs 600 mm long , PCC 1:2:4 typeB1 for grouting of base including taking down unserviceable panel. The scope of work also comprising the following :-The GPRS shall have seven segment display to show voltage, current, network and street light status , it should also have indicator for showing supply status , timer , overload or high low voltage. It should also able to measure voltage, current and automatic set street light overload current. Unit have facility to call back to registered number for power on/off and if any fault occurs at site.in SMS it should also monitor power/on/off time light on off time, ampere, voltage, unit mode, network percentage date and mobile number who called device number. The device should also have battery backup with minimum 24 hours backup capacity.The panel should have three operation mode :-1. GSM mode -in this mode light should be switched as per GSM controller\"s preset time by user by sms , 4 clock base timer facility should be availble 2. Nature switch based-in this mode light will be switches as per nature light lux level 3. Bypass mode -in this mode light will switched on directly for testing purpose and emeregncy switching .In GSM controller there should be facility to register 4 user by sms/call and alerts will be sent on all registered number and also call back on power on/off and faults on first registered number.The Gsm controller should also compatible for cloud based data transmission for interfacing with web for future use,Password protection for Accessing the control of device via SMS/IVRS complete all as specified and directed including the following subcomponents & features :- |
| 57 | Supply, laying, jointing & testing, XLPE insulated, armoured, heavy duty electric LT UG cable with multi stranded aluminium conductor, 1100 volts grade laid in trenches or in duct/passed through pipes or fixed to wall/poles etc cross sectional area of sizes 16sqmm 4core including taking down of unserviceable cable complete all as specified and directed.Make: Havells, Polycab, RPG Asian |
| 58 | Material & labour for straight through joint kit suitable for LT UG cable of size 16 to 35 sq mm all as specified and as directed. |
| 59 | Supply and fixing LED flood light fitting of 120watts pressure die cast housing with IP66 protection with efficient high output emitter LED for better distribution with all accessories prewired includingnecessary electric connection and bracket for fixing the fitting all including takingdown unserviceable old fittingas specified and as directed. Make: Philips/ Bajaj/ CG |
| 60 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m inhard/dense soil in depth and getting out |
| 61 | Material and labourPlain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. |
| 62 | Returning filling in including spreading, levelling Watering and well ramming in layers not exceeding 25cm all as directed. |
| 63 | Removing excavating material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point and all as specified and directed by the Engr-in-Charge. |
| 64 | Material and labourfor Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement.(Note : Reinforcement shall be measured and paid separately under relevant items of this schedule). |
| 65 | Material and labour for deformed steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hookingends and binding with mild steel wire (annealed)n.less than 0.9mm diacomplete.all as specified. |
| 66 | Dismantling wall and ceiling boards any description, any thickness, including cover fillets and frames |
| 67 | Material and labouranodised aluminium powder coated snap grid frame work size 605 x 605 mm for false ceilingincluding hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long and 6 mm thick non asbestos fiber cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping. complete all as specified. all as specified. |
| 68 | Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqmbut n exc 4 sqmeach and removing from the site |
| 69 | Supply and fixing450 x 600 mm be levelled edge mirror 5 mm thick of selected quality glass mounted on 6 mm thick AC bldg. board or commercial ply wood and fixed to wooden plugs with CP brass screws and cup washer as in repairs. |
| 70 | M&L in repairs for point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed fire retacable 1100 volts grade, multi stranded with copper conductor drawn through and incl non-metallic PVC Conduit with accessories in wall/roof/ceiling etc incl MS modular terminal boxes, concealed surface to wallscovered with modular plates with cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistrandedcable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified forMake of Cable : Plaza/ Polycab/ HavellsMake of Conduit : Supreme/ Diplast/ Avon PlastNote: (a) Switches, sockets outlets,blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely). |
| 71 | One light point /fan point controlled by one switch |
| 72 | One ceiling fan point controlled by one switch and one regulator. |
| 73 | One exhaust fan point controlled by one switch. |
| 74 | One socket outlet 5 Amps on same board controlled by one switch. |
| 75 | One socket outlet 5 Amps on independent board controlled by one switch. |
| 76 | All as per item No 70 here-in-before but using 2.5 sqmm copper conductor multi stranded for power point. |
| 77 | Supply and Fixmodular switch1 way 6 amp.1 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 78 | Supply and Fixmodular switch1 way 16 amp.1 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 79 | Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 80 | Supply and Fix modular Socket, 16A - 2/3 pin combined 2 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 81 | Supply and fixingwhite cover plate with frame 6 module ake : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 82 | Supply and fixingwhite cover plate with frame 8 module ake : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 83 | Supply and fixingwhite cover plate with frame 3 module ake : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta) |
| 84 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body complete all as directed. |
| 85 | S&F in repairs 36 W LED recessed 2x2 luminaire with classic design & glare free soft illumination. Housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens. CRI >80, Color temperature5700±300K, THD <10% and PF >0.95, IP20, IK02.Life class of 50,000hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:150-277 V, Frequency :50-60 HZ. Driver Safety requirement stds: IS 15885-2-13, Test Report to be submitted. Make : Bajaj Cat Part No Skylux - BZRSQL 30W GZi WH / Philips cat No RC 355 BLED 33-6500 PSU OD WH or equivalent in Wipro. |
| 86 | Material and labourfor wiring for circuit complete sub main wiring with 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia rigid PVC conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 4 sqmm single corewire PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductoretc including taking down existing sub main wiring of any size and all as specified.Note :- Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Make:- Havells/ Polycab/ Plaza. |
| 87 | Supply and fixingDistribution Board Sheet Metal Enclosure, Factory made fixed Flush with Wall inside the Nitches or Outside on Wall surface suitable for mounting Isolators & MCB\"s 240 Volts suitable rated Bus-bar capacity SPN 8-way, Double Door Front Operable and connecting up complete all as specified and as directed. Make-Indo Asian/Legrand/ Havells/Standard |
| 88 | Supply and fixingPVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 3 Core in flexible pipe for Electric Connection complete all as specified and as directed. |
| 89 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make: Indoasian, Havells, Legrand |
| 90 | Taking down existing Ceiling fan and Hanging only ceiling fan after down ceiling and connecting up including provision of cable from ceiling rose or connector to fan and suitable length of down rod as specified and directed by Engr-in-charge. |
| 91 | Supply and fixingExhaust Fan 300 mm sweep, 230/240 volt AC single phase, heavy duty,1400 RPM, corrosion less mild steel body of motor, including necessary cutting, making holes on stone/brick walls where required, fixing arrangement with MS pipe 350 mm dia of required length for protect reshape of stone masonry, suitable hold fast with necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make- havells /bajaj/ Almonard. |
| 92 | Supply and Fixing in repairs of 4 feet surface mounted battern type luminaire with a power consumption not more than 16 W, luminaire lumen output of 2000 lumens, luminaire efficacy > 120 lm/W with an operanting voltage range from 140V-270V. The luminaire shall have a white CRCA housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than. The luminaire shall have a CCT of 6500 K, CRI>80, power factor>0.95, SDCM<5, THD<10% and 50,000 burning hours as per L70B50 criteria. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature. The luminaire shall be EMI/ EMC complaint and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability (The driver can be replaced at site level). The luminaire shall not weight more than 7 Kg and the luminaire and driver shall be BIS approved with \"R\" number mentioned.Make Philips/Bajaj / Wipro. |
| 93 | Supply and fixingDistribution Board Sheet Metal Enclosure, Factory made fixed Flush with Wall inside the Nitches or Outside on Wall surface suitable for mounting Isolators & MCB\"s 240 Volts suitable rated Bus-bar capacity SPN 4-way, Double Door Front Openable and connecting up complete all as specified and as directed. Make-Indo Asian/Legrand/ Havells/Standard |
| 94 | Supply and fixingMCB Single Pole & Neutral 40 Amp, \"C\" Series 10 kA Breaking capacity, 240 Volt and connecting up complete all as specified and as directed. Make: Indoasian, Havells, Legrand |
| 95 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 96 | Material and labourfor earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised wire 4 mm dia (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth wore by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs complete all as specified and as directed.Note:- On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. |
| 97 | Supply and fixing manually operated polyester fabric roller venetian blinds of approved colour and pattern of any size and thickness of 0.45mm (+/-0.05mm) including high strength aluminium alloy extruded roller grooved tube having outer diameter 38 mm (=/- 0.05mm) and thickness 1.25mm (=/- 0.05mm) with ball chain pulley, ball chain including mounted projected aluminium brackets of powder quoted finish etc, Screw and fixing, complete all as specified and directed by Engr - in-Charge. |
