}

Tender For Supply And Installation Of Cup-Boards, Almirah And Storage Facilities For Control Room, Workshop Room And Other Equipment Rooms At Phpl Vijayawada, vijayawada-Andhra Pradesh

Indian Oil Corporation Limited-IOCL has published Tender For Supply And Installation Of Cup-Boards, Almirah And Storage Facilities For Control Room, Workshop Room And Other Equipment Rooms At Phpl Vijayawada. Submission Date for this Tender is 21-12-2023. Cabinet Supply Tenders in vijayawada Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

40990257
Tender For Supply And Installation Of Cup-Boards, Almirah And Storage Facilities For Control Room, Workshop Room And Other Equipment Rooms At Phpl Vijayawada
Open Tender
Indian
Andhra Pradesh
vijayawada
21-12-2023

Tender Details

Supply And Installation Of Cup-Boards, Almirah And Storage Facilities For Control Room, Workshop Room And Other Equipment Rooms At Phpl Vijayawada-Supply And Installation Of Cup-Boards, Almirah & Storage Facilities For Control Room, Workshop Room And Other Equipment Rooms 2 Providing And Fixing 450 Mm Deep Storage Cabinet ( All Types- Low Height, Full Height And Over Head ) With Boxing And Shutters Finished With 19 Mm Thick Pre-Laminated Block Board Of Bwp Grade, Decorative Type ( Bwp-Dec ) Of Approved Quality Or Equivalent Stamped With Is-1659:2004 ( Latest Edition ) And Pre-Lamination Should Conform To Is-2046:1995 ( Latest Edition ) With, 1.5’ X 1.25’ Mm Rubber Wood / C.P. Teak Moulding, Complete In All Respect Including All Hardware And Polishing Of Wooden Surfaces In Natural Shade With Melamine As Per Drawings, Specification, Glass Panelling Of 5.5 Mm And Directions Of The Engineer-In-Charge. [ Note: Elevation Area Shall Be Measured For Payment Purpose. ] 3 Kitchen Wall Cabinet ( Built-Up ) Providing And Fixing In Position Built-Up Cupboard, Internal Framework, Shelves, Drawers, Layon Slides Partitions And Shutters 19 Mm Thick Pre-Laminated Block Board Of Bwp Grade, Decorative Type ( Bwp-Dec ) Of Approved Quality Or Equivalent Stamped With Is-1659:2004 ( Latest Edition ) And And Pre-Lamination Should Conform To Is-2046:1995 ( Latest Edition ) And 3 Mm Thick Teak Wood Lipping At All Edges Of The Board With Polish / Enamel Paint Fixed With Water Resistant Adhesive On Inside And External Face As Per Approved Shade Including Ss Concealed Auto Type Hinges 19X25 Mm, Best Quality Teak Wood Lipping Around The Shutter Edges, Magnetic Ball Catchers, Brass Tower Bolt, Knobs, Handles With S.S. Roses 150Mm X 19Mm Diameter ( Ref. Make - Dorset, Model - Ip 06 Pr Ss Or Approved Equivalent ) Complete Including Spirit Polishing / Enamel Painted On Lipping In Required Shade Matching To The Laminate Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications, Glass Panelling Of 5.5 Mm And Directions Of The Engineer-In-Charge. ( Measurement Of Cupboard Shall Be Taken As Front Area Of Shutters Only ) : For Kitchen Wall Cabinets. 4 Kitchen Under Slab Cabinet ( Built-Up ) Providing And Fixing In Position Built-Up Cupboard, Shutters With 19 Mm Thick Pre-Laminated Block Board Of Bwp Grade, Decorative Type ( Bwp-Dec ) Of Approved Quality Or Equivalent Stamped With Is-1659:2004 ( Latest Edition ) And Pre-Lamination Should Conform To Is-2046:1995 ( Latest Edition ) And 3 Mm Thick Teak Wood Lipping At All Edges Of The Board With Polish / Enamel Paint Fixed With Water Resistant Adhesive On Inside And External Face As Per Approved Shade Including Ss Concealed Auto Hinges, Magnetic Ball Catchers, Brass Tower Bolt, Knobs, Handles With S.S. Roses 150Mm X 19Mm Diameter ( Ref. Make - Dorset, Model - Ip 06 Pr Ss Or Approved Equivalent ) And Frame Size 50X35 Mm In 2Nd Class Teak Wood As Per Drawing Complete Including Spirit Polishing / Enamel Painted On Frame & Lipping In Required Shade Matching To The Laminate, Fixing Of Frame To Wall With Hold Fasts, 1:2:4 Rcc Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications Glass Panelling Of 5.5 Mm And Directions Of The Engineer-In-Charge. ( Measurement Of Cupboard Shall Be Taken As Front Area Of Shutters Only ) : For Kitchen Under Slab Cabinets. 5 Crockery Case Providing And Fixing In Position For Crockery Case Made Of Internal Framework, Shelves, Drawers, Layon Slides Partitions And Shutters With 19 Mm Thick Pre-Laminated Block Board Of Bwp Grade, Decorative Type ( Bwp-Dec ) Of Approved Quality Or Equivalent Stamped With Is-1659:2004 ( Latest Edition ) And Pre-Lamination Should Conform To Is-2046:1995 ( Latest Edition ) Including Auto Type Hinges ( 19X25 Mm ) , Best Quality Teak Wood Lipping Around The Shutter Edges, Magnetic Ball Catchers, Brass Tower Bolt, Knobs, Handles With S.S. Roses 150Mm X 19Mm Diameter ( Ref. Make - Dorset, Model - Ip 06 Pr Ss Or Approved Equivalent ) , Spirit Polishing / Enamel Painting On Lipping In Required Shade Matching To The Laminate Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications With Glass Panelling If Required And Directions Of The Engineer-In-Charge. ( Measurement Of Cupboard Shall Be Taken As Front Area Of Shutters Only ) . 6 Providing And Fixing Panelling Or Panelling & Glazing For Panelled Or Panelled & Glazed Shutters ( 25 Mm To 40 Mm Thick Shutters ) For Doors, Windows And Clerestory Windows [ Note: Area Of Opening For Panel Inserts / Glass Panes Excluding Portion Inside Grooves Or Rebates Shall Be Measured For Payment ] :Float Glass Panes - 5.5 Mm Thick ( Weigth Not Less Than 12.5 Kg / Sqm )

Key Value

Document Fees
Refer document
EMD
INR 18200.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supply and Installation of Cup-Boards, Almirah & storage facilities for Control Room, workshop room and other equipment rooms at PHPL Vijayawada NOTE: 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to b e filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/unit/quantity in BOQ, then the item description/quantity/unit given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. Abbreviations: Unit - SQM - Square Meter
Sl. No. Item Description
1Supply and Installation of Cup-Boards, Almirah & storage facilities for Control Room, workshop room and other equipment rooms
2Providing and fixing 450 mm deep storage cabinet (All types- low height, full height and over head) with boxing and shutters finished with 19 mm thick pre-laminated block board of BWP Grade, Decorative type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) with, 1.5’ x 1.25’ mm rubber wood/ C.P. teak moulding, complete in all respect including all hardware and polishing of wooden surfaces in natural shade with melamine as per drawings, specification,Glass panelling of 5.5 mm and directions of the Engineer-in-Charge. [Note: Elevation area shall be measured for payment purpose.]
3Kitchen wall cabinet (built-up) Providing and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including SS concealed auto type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) complete including spirit polishing/ enamel painted on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications, Glass panelling of 5.5 mm and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen wall cabinets.
4Kitchen under slab cabinet (built-up) Providing and fixing in position built-up cupboard, shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including SS concealed auto hinges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) and frame size 50x35 mm in 2nd class teak wood as per drawing complete including spirit polishing/ enamel painted on frame & lipping in required shade matching to the laminate, fixing of frame to wall with hold fasts, 1:2:4 RCC etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications Glass panelling of 5.5 mm and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen under slab cabinets.
5Crockery case Providing and fixing in position for crockery case made of internal framework, shelves, drawers, layon slides partitions and shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) including Auto type hinges (19x25 mm), best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent), spirit polishing/ enamel painting on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications with Glass panelling if required and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only).
6Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick shutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside grooves or rebates shall be measured for payment] : Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail