Military Engineer Services-MES has published Tender For Additional /Alternator To Building No P-4 And Associated Works Services At Hq Sac Trivandrum. Submission Date for this Tender is 26-12-2023. Mobile Generator Tenders in trivandrum Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-12-2023 |
| Sl. No. | Item Description |
| 1 | The subject work to be carried out in prestigious nature building. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as speciifed and direted. Note: The tiled floor has to be demolished/ dismantled entirely up to sub base level / RCC floor level including backing coat irrespective of the number of layers of tiles. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | Demolition Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directe |
| 5 | Demolition for cement concrete (reinforcement cut as required to facilitate demolition) is reinforced of any description and in any position not otherwise specifically provided for |
| 6 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including frame work and fillets etc, complete all as specified and directed |
| 7 | Surface dressing n exc 15 cm deep getting out in hard/dense soil |
| 8 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dende soil, complete all as specified and directed. |
| 9 | Excavating over areas, exc 1.5 m but not exc 3m deep and getting out in hard/dense soil, complete all as specified and directed. |
| 10 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth; for doundations, etc, or for shafts, wells, cess pits, manhles, pier holes, etc . Not exceeding 10sqm on plan and getting out in any type of soil. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/ loose soil |
| 12 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and dircted. |
| 13 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 75 mm (Broken stone or boulders) |
| 14 | M&L, earth filling under floor, spreading and levelling, watering and ramming in layers n. exc 25cm thick all as specified. |
| 15 | M&L, for laying PCC 1:4:8 (40mm graded aggregate) type D-2Cement concrete in foundations, filling and mass concretecomplete all as specified and directed. |
| 16 | M&L, for laying PCC 1:3:6 (40mm graded aggregate) type C-2Cement concrete in foundations, filling and mass concretecomplete all as specified and directed. |
| 17 | M&L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channel and drains |
| 18 | Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching, bed block etc including necessary form work. |
| 19 | M&L Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregates as in coping/bed blocks including weathering slightly rounded or chamfered angles and throating and including necessary use and waste of form work |
| 20 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receving of floor tiles complete all as specified and directed. |
| 21 | M&L, 75mm thick PCC 1:3:6 type-C-2 in plinth protection 40mm graded aggregate with necessary form work |
| 22 | M&L, 100mm thick PCC 1:3:6 type-C-2 in under floor 40mm graded aggregate as in floor subbase |
| 23 | M&L, Plain cement concrete 1:3;6 type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested of 150mm bore. |
| 24 | M&L, for Reinforced cement concrete (design mix) RCC M-30 (using 20 mm graded stone aggregate ) in foundation footing , beams, base of column, under reamed piles and mass concrete, complete all as specified and directed. |
| 25 | M&L Reinforced cement concrete (design mix)M-30(using 20 mm graded stone aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 26 | M&L Reinforced cement concrete (design mix) M-30(using 20 mm graded stone aggregate ) in chajja, complete all as specified and directed. |
| 27 | M&L Reinforced cement concrete (design mix) M-30(using 20 mm graded stone aggregate ) in lintels, Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 28 | M&L Reinforced cement concrete (design mix)M-30(using 20 mm graded stone aggregate )Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 29 | M&L, Formwork to Rough finished surfaces of concrete , sides of concrete foundations, footings,bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams ; and similar work with rough finished flat surfaces of concrete, complete all as specified and directed. |
| 30 | M&L for Form work to soffits of roof slabs, floor slabs, landings etc & similar work n. exc 200mm thickwith fairfinished on flat surfaces of concrete horizontal or sloping, complete all as specified and directed. |
| 31 | M&L, Form work to Rough finished surfaces of concrete, chullah hoods, chajjas & similar work including edges with rough flat finished surfaces of concrete, complete all as specified and directed. |
| 32 | M&L, Form work to Rough finished surfaces of concrete lintels & roof beam, complete all as specified and directed. |
| 33 | M&L, formwork to Rough finished surfaces of concrete , sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces of concrete, complete all as specified and directed. |
| 34 | M&L, Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed. |
| 35 | M&L for Mild steel bars TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with, complete all as specified and directed. |
| 36 | M&L for Mild steel bars TMT Bars 6mm dia to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 37 | M&L for Mild steel bars TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 38 | S&F MS bands, straps, hold fasts and similar small articles grils confirming to Fe-290, complete all as specified and directed |
| 39 | M&L for for framed work for grills, staircase railing and structure any postion and any design as per requirement made out of stainless steel chormium plated square pipe, tubular pipes, plates angle, tees, flat etc, grade 304, cut to shape includng bending, welding, drilling, gusset pltes and riveting etc, complete all as per specified and directed by Engineer-in-Charge. railingcomplete all as specified and directed.Note: Weight of each section/pipe/fittings etc shall be physically ascertained through Engineer-in-Charge and payment shall be make only after the actual weight at site. |
| 40 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete built in CM 1:6 complete all as specified and directed. |
| 41 | M&L,Pre-cast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregae as in cover slab set in cement mortar 1:4 Note: Reinforcement shall be measured and paid seperately. |
| 42 | M&L Brick work with sub class B bricks straight or curved on plan with old size bricks built in CM 1:6 complete. |
| 43 | M&L Brick work with sub class "B" old size bricks, straight or curved on plan exceeding 6 m mean radious built in CM 1:4 all as specified and directed. |
| 44 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built in CM 1:4 |
| 45 | M&L Brick work with sub class "B" bricks straight or curved on plan exceeding 6 m mean radious built in CM 1:6 all as soecified |
| 46 | M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth |
| 47 | M&L, for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling including to be finished even and smooth surfaces without using extra cement |
| 48 | M&L, for rendering 5 mm thick in CM 1:3 on concrete surface of wall and concrete (i.e RCC Columns) including to be finished even and smooth surfaces without using extra cement |
| 49 | M&L for rendering 10mm thick on fair faces of brick or concrete as in backing coat in CM 1:4 complete all as specified. |
| 50 | M&L,Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing water proofing compound. Note: Supply only water proofing compound will be measured and paid seperately under respective item. |
| 51 | M&L,Rendering 15mm thick in cement mortar 1:4 on other than fair faces ofbrick work or concrete surfaces finished even and smooth without using extra cement. |
| 52 | M&L, for rendering 15mm thick in CM 1:6 on brickwork or concrete surfaces, internal wall surfaces including finished even and smooth without using extra cement complete. |
| 53 | M&L, for rendering 20mm thick in CM 1:4 in two layer oncement conrete or brick work including finish even and smooth surfaces using without extra cement with using WPC in Second layer of 10mm thick rendering. (WPC shall be measured separately). |
| 54 | Supply only liquid waterproofing compound (ISI grade only) |
| 55 | Supply only integral water proofing compound |
| 56 | Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5sqm but n.exc 4.0 sqm , complete all as specified and directed. |
| 57 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5sqm, complete all as specified and directed.(Note :Making good the surface with proper dimension to receive uPVC window where uPVC window & ventilators will be provided). |
| 58 | M&L 1st class hard wood (teak wood) main entrance door 2.00x2.10mtr size, double shutter 0.06 x 2.00 (2 Nos), 0.40 x 2.00 fixed either side, chowkat size 0.22 x 0.06 x 2.10 (2 Nos vertical) and 02 Nos horizontal top and bottom, Decorative designed 1st class hard wood (teak wood) shutters with brass dome fixed 6 nos each and Kerala style brass manichithrithazhu locking arrangements, including 04 Nos brass heavy duty tower bolt 200mm, brass bow handle 200mm (2 Nos per shutter), brass heavy duty butt hinges 150mm(4 Nos per shutter) size complete all as specified and directed. |
| 59 | M&L 1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 60 | S&F 1st class hard wood (teak wood) designed panelled door shutters 40 mm thick with premium quality mortice locking arrangement butt hinges heavy duty 125mm size (5 Nos per shutter), brass tower bolt 200mm(2 Nos per shutter), brass bow handle 150mm two nos each and necessary polishing/ finishes etc. Note:Design and coloured as directed by Engineer-in-Charge. |
| 61 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 62 | Supply and fixing factory made uPVC coloured Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. |
| 63 | Supply and fixing factory made uPVCcoloured Partition wall including tracksliding doorglazed frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes. (iii) Rate inclusive of making good jambs and reveals etc |
| 64 | S&F for factory made uPVC openable window/ ventilator single panel as per following details. A) Outer frame for double leaf shutter. B) openable shutters with suitable hinges for both glazed and gauzed (Wiremesh) shutters. C) Suitable handles and locking system for shutters. D) Aluminium grill to be provided on frame in between glazed and gauzed shutters. Note:-1) Glass panes and wiremesh shall be fixed at factory itself and the quoted rate is deemed to be inclusive of glass panes of 5mm thick and wiremesh. Note:-2) Size of the uPVC sections shall be as per manufactories catalogue of Villa windows series of M/s OKOTech or equivelant complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes / Stainless steel wiremesh pane. (iii) Rate inclusive of making good jambs and reveals etc |
| 65 | Supply and fixing factory made uPVC white colour Three tracksliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes / Stainless steel wiremesh pane. (iii) Rate inclusive of making good jambs and reveals etc |
| 66 | M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 67 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 finished fair to receive tiles, complete all as specified and directed. |
| 68 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed. |
| 69 | M&L for cement concrete tiles 25cmx 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed in CM 1:6, complete all as specified and dircted. |
| 70 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 71 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 72 | M&L for Vitrified Ceramic tiles double charged light shade 10 to 12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm and not exc 1.44 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 73 | M&L for Vitrified Ceramic tiles double charged10 to 12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed |
| 74 | M&L for Vitrified Ceramic tiles double charged 10 to 12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exc 1.00 sqm tiles in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed. |
| 75 | M&L Roof tiles, Mangalore pattern, inter locking at side joints, laid and fixed on 15 mm thick screed bed complete all as specified and directed. |
| 76 | M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6 complete all as specified and directed. |
| 77 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps,jambs,pillars, window cills,cooking plateforms, and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dustwith admixture of pigment to match with shade of granite. |
| 78 | S&F Cascade type water closet with flushing cistern including seat cover and all necessaty connections etc complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in repairs Cascade type water closet with flushing cistern including seat cover and all necessaty connections etc complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F 1.00x 0.80 mtr mirror, 5mm thick glass with double coat for protection and longevity grounded edges for safety etc. |
| 81 | S&F in repairs 1.00x 0.80 mtr mirror, 5mm thick glass with double coat for protection and longevity grounded edges for safety etc. |
| 82 | S&F 15 mm size angular stop cock fancy type chrimium plated premium quality with wall flange |
| 83 | S&F in repairs 15 mm size angular stop cock fancy type chrimium plated premium quality with wall flange |
| 84 | S&F Chromium plated shower roses without Swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed. |
| 85 | S&F in repairs brass Chromium plated shower roses without Swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed. |
| 86 | S&F 75 PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete all as specified and directed. |
| 87 | S&F wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete all as specified and directed. |
| 88 | S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete all as specified and directed. |
| 89 | S&F hand shower 100mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system and easy flex tube in chrome finish 1.5m long with Nuts compete all as specified and directed. |
| 90 | S&F in repairs hand shower 100mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system and easy flex tube in chrome finish 1.5m long with Nuts compete all as specified and directed. |
| 91 | S&FTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F stainless steel soap dish holder complete all as specified and directed. |
| 94 | S&F in repairs stainless steel soap dish holder complete all as specified and directed. |
| 95 | S&Fglass corner shelf 9 inch size with guards and brackets complete all as specified and directed. |
| 96 | S&F in repairs glass corner shelf 9 inch size with guards and brackets complete all as specified and directed. |
| 97 | S&F glass shelf 550mm long complete all as specified and directed. |
| 98 | S&F rust free, stainless steel single door bathroom cabinet of size 16x24x5 inch with full mirror has 4 shelves 5inches deep inside the door and toothbrush holder, complete all as specified and directed. |
| 99 | S&F in repairs rust free, stainless steel single door bathroom cabinet of size 16x24x5 inch with full mirror has 4 shelves 5inches deep inside the door and toothbrush holder, complete all as specified and directed. |
| 100 | S&F 15 mm pillar taps, hot and cold, cast copper alloy, chro-mium plated,screwed for iron pipe and fixed complete all as specified and directed. |
| 101 | S&F in repairs 15 mm pillar taps, hot and cold, cast copper alloy, chro-mium plated,screwed for iron pipe and fixed complete all as specified and directed. |
| 102 | S&FHealth faucet (ABS Body) premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified anddirected. |
| 103 | S&F in repairs Health faucet (ABS Body) premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified anddirected. |
| 104 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 105 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 106 | S&F Table top Wash hand basin snow white 405mm dia complete all as specified and directed |
| 107 | S&F in repairs Table top Wash hand basin snow white 405mm dia complete all as specified and directed |
| 108 | Taking up or down 20mm dia steel tubing and connections , including cleaning for re-fixing or removal from storecomplete all as specified and directed. |
| 109 | Taking up or down 25 - 32mm dia steel tubing and connections , including cleaning for re-fixing or removal from storecomplete all as specified and directed. |
| 110 | S&F 20mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., |
| 111 | S&F 20mm bore CPVC pipe with SDR 11& plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed. |
| 112 | S&F 32 mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., |
| 113 | S&F in repairs 25mm dia stainless steel curtain rod including supporting brackets and end caps/dome complete all as specified and directed. |
| 114 | S&F 50mm bore Unplasticized PVC pipes of pressure rating 10 kgf/sqcm in repairs complete all as specified and directed |
| 115 | S&F PVC (SWR) pipes 75 mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 116 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed. |
| 117 | S&F 150mm bore PVC (SWR) soil,waste/rain water single socketed in any length with rubber ring joints laid in floor or fixed to walls complete att as specified and directed. |
| 118 | M&Lfor provn of water proofing roof treatment to RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermalinsulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following specifications: |
| 119 | (a) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners. |
| 120 | (b)Bituminous primer conforming to IS : 3384-1965 oil bound bitumen primer @ 0.20kg per sqm and applying a coat blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm to be applied an prepared surface till the surface is properlyimpregnated. |
| 121 | (c) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. |
| 122 | (d) All joints& changes in direction should be curved with cement morar 1:3 mixed with SBR latex @ 200 ml per beg of cementand cured well before laying the membrane. Including one coat of aluminium paint over a coat of aluminium oxide primer. |
| 123 | M&L, Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured |
| 124 | M&L, Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 125 | M&L, Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 126 | M&L, Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall |
| 127 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 128 | M&L toughned glass 12 mm thick as inpartitionsincluding toughned glass door 12 mm thick with SS door handles, floor spring etc and including all necessary acesseries cutting to shape, drilling holes as required, complete all as specified and directed by Engr-in-Charge. Note: Quoted rate shall include all accessories necessary to fix the partition/ door in position. |
| 129 | M&L for 3mm wall care putty on wall, complete all as specified and directed. |
| 130 | M&L for 3mm wall care putty on wall including complete removal of existing treatment, complete all as specified and directed. |
| 131 | M&L for preparing of newly plastered wall surfaces and applying two coat of oil emulsion paint over 3mm thick putty and a coat of primer. |
| 132 | M&L for preparation of newplastered surfaces and applying two coats of exterior emulsion weather coat paint over the over a coat of primer complete all as specified and directed. |
| 133 | M&L, Preparing of newly plaster surface of Ceiling / Priming plastered and other surfaces with alkali-resistant priming paint and Distemperingwith Two Coats of distemper oil emulsion. |
| 134 | M&L,Preparation of newly plastered or unplastered surface and applying two coats of weather proof paint to external surface. |
| 135 | M&L for preparation of old steel surface of any description over 10 CM width/girth and applying one coat of synthetic enamal paint complete all as specified and directed. |
| 136 | M&L preparation of old decorated wooden surface of any description over 10 CM width/girth and applying one coat of synthetic enamal paint complete all as specified and directed. |
| 137 | M&L one coat of exterior emulsion weather coat paint over the old wall surface including the preparation of the surfaces complete all as specified and directed. |
| 138 | M&L formodern/ desgin Mural painting exterior or wall tiles for external wall surface set and jointed in neat cement slurry/ adhesive and pointed in white or coloured cement to matchcomplete all as specified and directed. Note:Design and coloured as directed by Engineer-in-Charge. |
| 139 | M&L for preparation of new treated of wall surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 140 | M&L for preparation of old treated surfaces of walls and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 141 | M&L for preparation of old treated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 142 | M&L for french polishing one or more coat on old decorated surfaces of any description, any width or girth including clearing and preparing the surfaces of old works etc complete all as specified and directed |
| 143 | Extra for forming fair finished drain or channel 30 cm inner girth incement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 144 | Cutting into existing manholes for onnecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required of 150mm bore pipe |
| 145 | Cutting into existing manholes for removing existing branch drain, making good to walling and rendering, cutting out branch channel,and making good benchings of 150mm bore pipe. |
| 146 | M&L Reinforced concrete pipes, 450mm bore, class NP 2 laid and joined complete with collars. |
| 147 | M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in 450mm dia pipe |
| 148 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed plaster surfaces of wall, floor, ceilingto meet the existing surface and removing materials and debris to reinstate the premise neat and clean complete all as specified and directed. |
| 149 | M&L for Point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etcall as specified and directed for the following :- |
| 150 | One light point controlled by one one way switch |
| 151 | One fan point controlled by one one way switch and regulator |
| 152 | One switch socket outlet 5 Amps on independent board |
| 153 | All as per Item No 144 here-in-before but with 2.5 SqmmPVC insulated multistranded copper conductor cable FRLSH including 2.5 sqmm PVC insulated copper cable asearth continuity conductorfor one switch socket outlet 15 Amps on independent board all as directed. |
| 154 | M&L for point wiring with 4 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn in and including rigid PVC rigid conduit of 20mm size medium grade with all conduit accessories concealed including provision of 4 sqmm PVC insulated copper cable FRLS ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable pate with cover with suitable screws for AC point all as specified and as directed. |
| 155 | S&F Switch Modular type single pole oneway 5 amps all as specified and directed. |
| 156 | Supply & Fix modular socket 3 pin 5 Amps flush type all as specified and directed. |
| 157 | S&F Switch Modular type single pole oneway 15 amps all as specified and directed. |
| 158 | Supply & Fix modular socket 3/5 pin 5/15 Amps flush type all as specified and directed. |
| 159 | S&F Fan step regulator, 120W - 2 module |
| 160 | S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body on PVC round block all as specified. |
| 161 | M&L in repair for Modulartype socket outlet incorporating a residual current device with sheet metal enclosure flush type with over current protection in and including MCB SPN 25A,240 Volt and plug top for Air conditioner all as specified and directed. |
| 162 | M&L for sub main wiring concealed type with 4 runs of 10 Sqmm for phase and neutral and one run of 10 Sqmm for earth continuity 1100 Volts grade PVC insulated unsheathed single core multistranded cable FRLSH grade with copper conductorconfirming to IS 694 drawn inand including provision of suitable dia of PVC rigid conduit (medium grade) with conduit accessories such as bends, elbows, saddles including cutting chases and making good in CM 1:3 complete all as specified and directed. |
| 163 | Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 164 | Fixing only LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type obtained from item No 143 here-in-before including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 165 | Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 166 | Fixing only LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC surface type obtained from item No 143 here-in-before including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 167 | Supply and fix in repair new energy efficentLED Box type fitting 1 x 20 watts 4 feet long CRCA body powder coated whitebatten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete |
| 168 | Supply and fix in repair energy efficient LED building security light Fitting 25 Watts for fixing on and including bracket made of 40mm light grade GI pipe of 1.2M length bend to shape as required and fixed on wall with MS flat,nut bolts etcincluding twin core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. |
| 169 | Fixing only Decorative type LED luminaire brass body suitable to hanging on ceiling hook with necessary chain obtained from item No 143 here-in-before complete with connected accessories suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 170 | Supply and fixing in repair Decorative type LED wall mounting type luminaire opal glass with gold finish fixture wall lamp with one LED filament lamp E 27 base , 220 V, AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 171 | Fixing only Decorative type LED wall mounting type luminaire opal glass with gold finish fixture wall lamp with one LED filament lamp E 27 base , 220 V, AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 172 | Supply and fixing in repair Decorative type LED wall mounting type luminaire opal glass with gold finish fixture wall lamp with two LED filament lamp E 27 base , 220 V, AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 173 | Fixing only Decorative type LED wall mounting type luminaire opal glass with gold finish fixture wall lamp with two LED filament lamp E 27 base , 220 V, AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 174 | Supply and fixing in repair Decorative type LED light fabric shade with chrome finishing table lamp with one LED bulb of 7/10W, 220 V AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 175 | Fixing only Decorative type LED light fabric shade with chrome finishing table lamp with one LED bulb of 7/10W, 220 V AC glare free warm white obtained from item no here-in-before complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 176 | Supply and fixing in repair Decorative type LED mirror type light fitting 2 feet long copper finished body 10/15 watt with high quality inbuilt driver with white light, 220 V AC glare free warm white complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 177 | Fixing only Decorative type LED mirror type light fitting 2 feet long copper finished body 10/15 watt with high quality inbuilt driver with white light, 220 V AC glare free warm white obtained from item no here-in-before complete including connecting up with three core flexible copper conductor cases of suitable size complete. |
| 178 | S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 179 | Supply and fixand connecting up BLDC ceiling fan of size 1200mm sweep complete with and including provision of cable 3 core of size 0.5 sqmm from connector to fan, provision of 3mm thick PVC sheet cover including writing MES No 2cm height with synthetic enamel black paint all as directed. |
| 180 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 181 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m |
| 182 | Supply and fix wall mounted type fan 400mm sweep(white colour) uniquely designed with square wire guard with air modes of standard,natural,breeze and sleep mode with up to 8 hours timer, functioning with remote controlled functions and soft touch digital panel,1350RPM,230V,55W, air delivery 65Cum/Hour all as specified. |
| 183 | Supply, fixing and connecting up complete MCB DB TPN 4 waydouble door, 415 V, AC, 50 Hz, for MCBTPN as incomer andMCBs SP as out going,IP-43 protection conforming to IS-13032 universal mounting with copper bus bar,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides including taking down old one complete all as specified and directed. |
| 184 | Supply and fixing in repairs miniature circuit breaker (MCB) Triple pole and Neutral 63A rating 240V, 10KA "C" curve in the MCB DB complete with connection testing and commissioning. |
| 185 | Supply and fixing in repairs miniature circuit breaker (MCB) Single pole 5 to 32A rating 240V, 10KA "C" curvein the MCB DB complete with connection testing and commissioning. |
| 186 | M&L in repairs for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtrsdeep below ground level) with top edge of the platenot less than 1.5 mtrs below normal ground level,connected togalvanised iron wire of 4 mm dia as earthing leadby means of bolts, nuts, check nutsand washers of galvanised iron or steel all as shownin electrical plate No 3 in SSR connected to eartingtest point all as specified or indicated complete withexcavation & earth work, PCC pit with 50mm thickRCC cover (grade M-15) having suitable handle(10mm MS Rod) 20mm dia GI medium gradewatering pipe with GI funned with wire mesh 15mm bore GI pipe (light grade) forprotection of earth leadconductorall as directed and testing on completion. |
| 187 | Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 100 litre per day capacity ,with electrical heating back up 3kw including testing, complete all as directed. |
| 188 | M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 250 Ltr hoisted and fixed in position all as specified |
| 189 | Removing of Split type AC 1.5/2.0 ton capacity after pumping down gas from position, servicing of indoor and out door units, refixing of AC to position along with new copper pipesof required length (not more than 3Mtr length) and charging of gas in compressor after rectifing leak and testingcomplete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
