Military Engineer Services-MES has published Tender For Repairs To Flooring And Joinery Works And Certain Other Br Works In Jadunath Enclave Under Age Br I Under Ge ( South ) Bathinda At Bathinda Military Station ( 2Nd Call ). Submission Date for this Tender is 28-12-2023. Civil Work Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Comprehensive maintenance for Carpentry work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentry nature works like easing of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers ,handle hinges in respect to Easing of door / windows/cupboards (SteelWooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl small repairs if reqd with and incl greasing, oiling, screws/nales for fixing the fittings. |
| 2 | Comprehensive maintenance to masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs, soffit, cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface. |
| 3 | Note for item No 01 to 03. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirements of works and shall rectify the repair/maintenance works within time given below :- (a)Minor plumbing complaints - 48 hours (b)Minor Joinery complaints - 48 hours (c)Minor masonary complaints - 48 hours (d)Major Plumbing - 5 days (e)Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day). |
| 4 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) n. exc 1.50 sqm each all as specified |
| 5 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each all as specified |
| 6 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site all as specified |
| 7 | Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified |
| 8 | Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 9 | Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed. |
| 10 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) |
| 11 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) |
| 12 | M & L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified |
| 13 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including necessary finishing of wall for fixing of frame complete as per direction of Engineer-in-Charge. |
| 14 | Ditto all as per item above but of Frame size 65 x 100 mm |
| 15 | Ditto all as per item above but of double shutter frame size 65 x 125 mm |
| 16 | S&F factory Made Solid panel PVC Moulded solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat mouldedwood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading. Specification & drawing complete all as specified and directed. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges (03 Nos Minimum), Stainless steel fancy type door handle, tower bolt and sliding boltas approved by GE with necessary fixing arrangement of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 18 | S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitered beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) all as specified |
| 19 | M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified |
| 20 | Supply and fixing mild steel framed work such as grills, guard bars, gate, gratings, door frame etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed |
| 21 | Dismantling boarding, any description, fixed in any position as in cup board shutters, kitchen cabinet of any thickness fixed with nails complete all as specified |
| 22 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as perspecifications & drawing |
| 23 | S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of "C" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings |
| 24 | S&FMild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified |
| 25 | S&F in repairsMild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified |
| 26 | M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified |
| 27 | S & F in Aluminum Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified |
| 28 | S & F in mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified |
| 29 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm length, completeall as specified |
| 30 | S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm length, completeall as specified |
| 31 | S&F250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified |
| 32 | S&FAluminum anodisedhandles cast type 150 mm long completeall as specified |
| 33 | S & F floor door stopper 140mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring all as specified |
| 34 | S & F in repairs 300mmmild steel ordinary rat tail rodsprings (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified |
| 35 | S & F in repairs 25mm dia fancy type harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers etc. curtain rod with brackets and knobs at both ends as per site requirement complete all as specified |
| 36 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/springs clips and fixing new ones all as specified |
| 37 | S & F for 3 mm thick,sheet glass ordinary quality and glazing with oil puttyin square n. exc 0.5 sqm in each pane all as specified |
| 38 | S & F for 3 mm thick,figured glass, pin head type and glazing with oil puttyin square n. exc 0.5 sqm in each pane all as specified |
| 39 | M&L for running welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified |
| 40 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified |
| 41 | S & F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified |
| 42 | M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 43 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 44 | M & LNon-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description,complete all as specified |
| 45 | M & LNon-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete, all as specified |
| 46 | M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified. |
| 47 | M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:4 and including dismantling of old tiles/terrazzo finish etc, complete all as specified |
| 48 | S&F glazed ceramic dark coloured tiles 300x200mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface and taking down of old existing treatment & plaster, scrubbing down with water and disposing off the wastage to low laying areas to a distance exceeding 50 Mtr but not exceeding 100 Mtr away complete all as specified and directed. Make:- Orient, Kajaria, Bell ceramic, Johnson. |
| 49 | M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mmsize in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specifiedincluding 10mm thick plasterin CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed. |
| 50 | M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified (Note : Rates deemed to include for provision hole through marble & RCC slab for LPG gas pipe and rounding and polishing of edges of marble slab) |
| 51 | M&L for Dismantling Stone slabs and tiles of any description or thickness in floors, aprons & shelves laid bedded and pointed in any mortar all as specified. |
| 52 | S & F in repairball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified |
| 53 | S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union all as specified |
| 54 | S & F in repairs 15mm bore, fancy type, chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe all as specified |
| 55 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality |
| 56 | S & F in repair PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets,PVC bend long type and connection to flush pipe of any size and patterncomplete all as specified |
| 57 | S & Fin repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified |
| 58 | S & F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall / RCC shelve and connecting union to pipe overall size 495mm x 420mm bowl complete all as specified |
| 59 | S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified |
| 60 | S&F in repairs stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm,fixed on walletc complete all as specified & directed by Engr-in-Charge. |
| 61 | S & F in repairs 15mm bore fancy type chromium plated brass bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 62 | S & F in repairs 15mm bore fancy typechromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 63 | S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified |
| 64 | S&F in repairs for three layer Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified |
| 65 | S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc all as specified |
| 66 | S & F 110 mm bore, PVC (SWR) fittings such as bends of any radius, tee,shoe etc;fixed to PVC pipes, complete all as specified |
| 67 | Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour, high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed |
| 68 | S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified |
| 69 | S & F in repairs vitreous China squatting pan, "Orissa" pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. |
| 70 | Dismantling and disconnecting of existing CI soil vent pipe 100 mmbore fixed to wall, laid in trenches incl all fittings & accessories, all as directed. |
| 71 | S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemicalcement joints laid in trenches/floors or fixed in walls, all as specified. |
| 72 | Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified. |
| 73 | Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specified |
| 74 | S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified |
| 75 | S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified |
| 76 | S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors |
| 77 | Fixing only CI fittings 100mm bore of any type & description |
| 78 | Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed. |
| 79 | Renewing non skid /glazed ceramic tiles in patches in floor or walls,area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified (new tiles shall be paid at supply only rate separately) |
| 80 | Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately),sealing joints with solventcement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (rates of repair/replacement of tiles in floor/wall shall be included in the quoted rates by the contractor), complete all as specified |
| 81 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified. |
| 82 | M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specified |
| 83 | M&L apply for a layer of hot blown bitumen of 85/25 penetration grade @ 1.75 kg/sqm incl cleaning the surface of roofor sunken etc complete all as specified |
| 84 | M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurement & paid separately) and finishing top surface even & smooth as in roof slab /sunken floor , etc all as specified |
| 85 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified |
| 86 | Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified |
| 87 | Note:- Net contract sum shall be calculated after deduction of Sch of credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
