Military Engineer Services-MES has published Tender For Certain Repair To Joineries Cup Boards Incl Aluminium Work, Panelling, Ceiling, Plastering, Flooring, Plinth Protection, Allied Works In Md And Otm Accn Located At Zone D And Offrs Md Accn New Defence Colony Area Of Age B/R-I Under Ge (Eas. Submission Date for this Tender is 27-12-2023. Cabinet Supply Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed. |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast complete all as specified and directed. |
| 3 | M&L for brick work withold size fly ashbricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for brick work with old sizefly ashbricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 6 | M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed. |
| 8 | M&L for 15mm thick rendering inCM 1:4with on fair surfaces of walls finishedeven and smooth withoutusing extra cementcomplete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 10 | M&L for preparation of newor previously undercoated surface of ceiling and applying threecoats of white wash on ceiling complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surface ofwall and applying two coats of OBD over a coatof primer on wall complete all as specified and directed. |
| 12 | M&L for preparation of old surface of ceiling and applying one coat of white wash on ceiling complete all as specified and directed. |
| 13 | M&L for preparation of old surfaces of wall & applying one coat of cement base paint of approved shade/tint complete all as specified. |
| 14 | M&L for preparation of old surface ofwall and applying one coat of OBD complete all as specified and directed. |
| 15 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey andcutting holes for hold fasts & making good complete all as specified and directed. |
| 16 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified and directed. |
| 17 | Taking down shutters exc 1 sqm but not exc 2 Sqm eachcomplete all as specified and directed. |
| 18 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 19 | S&FsolidPVC door frameof size 50x47mmmade out of 5mm thickplain colour PVC sheet reinforcedwith MS Squaretube etc complete all as specified and directed. |
| 20 | S&Ffactory made solidpanelPVC door shutter30mm thick (style) consisting frame made outof MS tubefortop andbottom rail MS frame shall becovered with heat mould plaint colourPVC C channel havinga PVC sheet strip of 20mmwidthstuck inside withsolventcement forstyle and plain colour PVC sheetfor top rail lock andbottomrail on either sideand as gap insert for top railand bottom railplain colour PVCsheet tape fixed inMS frame welding sealed to the styleand rail withsuitablePVC sheet bearing andjointingtogether withsolvent cement etc complete all as specified and directed. |
| 21 | M&L for 2nd class hard wood, wooden beading, plain fillets,square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm butnot exc 6 sqcm fixed with nail complete all as specified and directed. |
| 22 | S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints,complete all as specified and directed. |
| 23 | S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides completeall as specified and directed. |
| 24 | Supply and fixing 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed |
| 25 | Supply and fixing 30mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed |
| 26 | S&F35mm thickplain framed panelledshutterswith lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile complete all as specified and directed. |
| 27 | S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and directed. |
| 28 | S&F butt hinges of size 75mm medium weight, stainless steel marked complete all as specified and directed. |
| 29 | S&F 150mm longaluminium anodised barrel tower boltsof extruded section complete all as specified and directed. |
| 30 | S&F 125mm longaluminium anodised barrel tower boltsof extruded section complete all as specified and directed. |
| 31 | S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 32 | S&F 150 mm size aluminium alloy handles, fabricated type,extruded section complete all as specified and directed. |
| 33 | S&F 100 mm size aluminium alloy handles, fabricated type,extruded section complete all as specified and directed. |
| 34 | S&F in repair aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 36 | M&L for machine cut kota stone slab flooring 20-25mm thick overcementscreed bed15mm thick in CM 1:6, base laidand jointedwith grey cementslurry mixedwith pigmentto match theshade of theslab including rubbingand polishing complete all as specified and directed. |
| 37 | M&L Glazed ceramic tiles in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 38 | M&L for Non skid Ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. |
| 39 | M&L for Non skidceramic colouredtiles 7 to 8 mm thick(square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor includingscreed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 40 | S&F vitrifiedceramic tilesdark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exc 0.18 sqm of each tiles not exc 0.38 sqm, in floors etc. laid over15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cementto match complete all as specified and directed. |
| 41 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 42 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pig mentss in floor, paving, path etc complete all as specified and directed. |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 44 | M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed. |
| 45 | Dismantilingwater tank of capacity exc 250 and not exc 500 ltr capacityand removing to store complete all as specified and directed. |
| 46 | Dismantilingwater tank of capacity exc 500 and not exc 1000 ltr capacity and removing to store complete all as specified and directed. |
| 47 | Dismantilingwater tank of capacity exc 1000 and not exc 2000 ltr capacity and removing to store complete all as specified and directed. |
| 48 | S&F of 500 ltr, three layer rotational moulded polyethylene water storage tankcylindrical hoisted & fixedin position complete all as specified and directed. |
| 49 | S&F of 1000 ltr, three layer rotational moulded polyethylene waterstorage tankcylindrical hoisted & fixedin position complete all as specified and directed. |
| 50 | S&F of 2000 ltr, three layer rotational moulded polyethylene waterstorage tankcylindrical hoisted & fixedin position complete all as specified and directed. |
| 51 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 25mm -455 gms) complete all as specified and directed. |
| 52 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 20 mm -210 gms) complete all as specified and directed. |
| 53 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 15mm -142 gms) complete all as specified and directed. |
| 54 | Cleaningand removing all scaleand dirtetc from tank andmouth ofcirculatingpipe andrefixingof capacity exc 250 not exc 500 ltr complete all as specified and directed. |
| 55 | Cleaningand removing all scaleand dirtetc from tank andmouth ofcirculatingpipe andrefixingof capacityexc 500 not exc 1000 ltr complete all as specified and directed. |
| 56 | DismantlingAC sheet (Corrugated, Semi Corrugatedetc)as in roofs etc including ridges complete all as specified and directed. |
| 57 | Supply and fixing 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed. |
| 58 | M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with ‘L’ type or J type or cranked hook bolt complete all as specified and directed. |
| 59 | S&F of pre-painted galvalume aluminium zinc coatingGI basedcorrugatedsteel sheet 0.50mm thickof any colour having tensilestrengthof 550 Mpaas in roomcovering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed. |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 61 | S&F framed work as in doors or gates of angleor other section withgusssetplates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to beprepared for hanging orsliding with and including either hooks orhinges steel hanging door fittings ( exclusive of steel sheeting or other coveringsrunning railsand guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-265) quality B complete all as specified and directed. |
| 62 | M&L for preparation of newsteel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer complete all as specified and directed. |
| 63 | S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to GradeFe 410W(Gde E-265 quality `B’ complete all as specified and directed. |
| 64 | M&L in repair 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. |
| 65 | S&F 18 mm thick solid PVC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling, complete all as specified and directed |
| 66 | S&F glass dividing strips 3mm thick and 38mm wide & fixed in position complete all as specified and directed. |
| 67 | M&L for 25mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregatewith concrete surface even and smooth with using extra cementas in flooring,completeall as specified & directed. |
| 68 | M&L for 40mm thick PCC 1:2:4,type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete, all as specified & directed. |
| 69 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base,complete all as specified and directed. |
| 70 | M&L for cement concrete 1:3:6 type C2 , 75 mm thickas in plinth protection and flooringand finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 71 | Dismantling of wall andceiling boards (fibre, pulp, insulation, etc) or insulationboards/slabs/blankets, any thickness including cover filltets complete all as specified and directed. |
| 72 | Providing and fixing of E-board "Everest" or equivalent make 600 x 600 x 4mm tk white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. complete all as specified and directed. |
| 73 | S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% , humidity S&F for fully perfortated 12mm thick micro tegularedged or 10mm thick squre edged GRG(Glass Fibre Reinforced Gypsum) false ceilijng tiles at all heights with GRC false ceiling tiles of size 595x595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987 . Noncmbustible as per BS476(para4 )-1970 and light reflectance of 85% ( minimum) to be laid in true horizontal level suspended on interlockingmetal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 1200 mm and 3000 mm, cross-T of size 15x 32 mm of length 1200 mmand secondary intermediate cross-T of size 15x32 mm of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanizedmild steel items (galvanized @ 80 grams per sqm) i.e 50mm long 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level aduster of length and L- shape leveladjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall wood screw. The work shall be carried out as per direction of the Engineer-in-Charge |
| 74 | S&F floor door stopper as in repairof aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 75 | S&F anodised aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed. |
| 76 | S&F powder coatedaluminium anodised frame/chowkatof Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed. |
| 77 | Providing and fixingpowder coated aluminium partly glazesd and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, toprails 83x44mm where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations,complete all as specified and directed. |
| 78 | M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed. |
| 79 | S&F powder coatedAnodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 81 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed. |
| 82 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to including taking down of old water tubing pipe from walls and ceilings or laid in floors complete all as specified and directed. |
| 83 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete toincluding taking down of old water tubing pipe from walls and ceilings or laid in floors complete all as specified and directed. |
| 84 | S&Fin repair stainlesskitchenplate rackmade of 0.80mm thick sheet of size 900x1200 mm and fixed to wall complete all as specified and directed. |
| 85 | S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, "P" or "S" trap, including connection to trap and flushing pipe, antisyphonage pipe etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 86 | S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed. |
| 87 | S&F in repair vitreous china wash hand basin, 600x480mm counter top oval shape cascade pattern with pillar tap cast copper alloy ,capstan head CP,PVC connection,CP bottle trap, PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, complete all as specified and directed. |
| 88 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ).and trap including connection to drain (or outgoing pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed complete all as specified and directed. |
| 89 | S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink complete all as specified and directed. |
| 90 | S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen withplugs, washers and wastes,including fixing with cast ironcantileverbrakkets, bedding in cement mortar on to dwarf wall,conntectingunion to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia wastepipe of polythelene of low or high density, 32mm borechromium plated brasswaster fitting with longscrewed shanks and fly nuts, flage endbedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete includingtaking down old unserviceable sink complete all as specified and directed. |
| 91 | S&F in repairviterious china coupled WC, (wall hungor floor hung) withcoupled closed bowl-WC P or S type with seat cover, hinges accessories set, cistern complete all as specified and directed. |
| 92 | S&F in repair plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 93 | S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed. |
| 94 | S&F in repairs bevelled edge mirror of size 1.8mx0.60 m length of selected quality 5mm thickglass mounted on 6mm thick ac building board or commercial ply wood and fixed to stainless steel fastener 50mm long spacer/wooden plugs with chromium platated brass screw and cup washers complete all as specified and directed. |
| 95 | S&F in repair 600 mmx450x5 mm bevelled edge mirror of selected quality glass mounted on 6.0 mm thick AC building board or commercial plywood and fixed wooden plug with chromium coated brass screws and cup washers complete all as specified and directed. |
| 96 | S&F in repair vitreous chinaurinal half stall type white excluding flushing cistern ,flush pipe and waste pipe complete all as specified and directed. |
| 97 | S&F in repair brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed. |
| 98 | S&F in repair PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality, PTMT nuts fixed complete all as specified and directed. |
| 99 | S&F in repairPVC cabinet with mirror and door of size 560X410mmcomplete all as specified and directed. |
| 100 | S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed. |
| 101 | S&F brass chromium plated single hole Sink mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved qualitycomplete all as specified and directed. |
| 102 | S&F in repair C P angle valvefor 15 mm bore pipe fixed complete all as specified and directed. |
| 103 | S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe20mm bore complete all as specified and directed. |
| 104 | S&Fin repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe orfor brass ferrule andfixed bothends foriron pipe or for unions complete all as specified and directed. |
| 105 | S&F in repairfancy type piller taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed. |
| 106 | S&F in repair CP concealed stop cock for 15 mm bore pipecomplete all as specified and directed. |
| 107 | S&F in repair CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified and directed. |
| 108 | S&F in repair 125 mm dia CP brassshower rose with orwithout swivel joints any size includingfixing to steel pipe or unionadd if fixed complete all as specified and directed. |
| 109 | S&F in repair pegs set of 6brass fancy type, complete all as specified and directed. |
| 110 | S&F in repair CP brass towel rails 20 mm dia and 600 mm long fixedincluding chromium plated brass screw and wooden / cleats complete all as specified and directed. |
| 111 | S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m longcomplete set complete all as specified and directed. |
| 112 | S&F in repair symphonic action type single/twin type flushing cestern kit any size and any type complete all as specified and directed. |
| 113 | S&F in repair 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed. |
| 114 | S&F in repair glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixedwith chromium plated brackets complete all as specified and directed. |
| 115 | S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed. |
| 116 | S&F in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plateincluding welding if required complete all as specified and directed. |
| 117 | S&F in repair cast iron floor trap with gratings incl jointing to waste pipe in run lead 75/100 mm out let complete all as specified and directed. |
| 118 | Repair to steel window, repair/replacement of hinges, window stay, handles etc. welding of hinges complete all as specified and directed. |
| 119 | S&Fin repairbrass spindle of any size of bib taps/pillar taps/stop cock etc complete all as specified and directed. |
| 120 | S&F in repair110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed. |
| 121 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed. |
| 122 | S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed. |
| 123 | S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed. |
| 124 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and averagewidth of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 125 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and averagewidth of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 126 | S&F in repair hinges for modular kitchen shutter for any degree complete all as specified and directed. |
| 127 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed. |
| 128 | S&F 4.8mm thicksheet glass ordinary quality and glazing with oil putty/Aluminium beadsin squareexc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfacesground or obsecured to one side complete all as specified and directed. |
| 129 | M&L for preparation of new/old surfaceof wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed. |
| 130 | S&F in repairviterious china coloured WHB 600 x 480 counter top oval shape cascade pattern with pillar tapscast copper alloy capstan heads CP PVC connection, CP bottle trap and CP waste coupling 32mm dia in lead to waste pipe complete all as specified and directed. |
| 131 | M&L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks,straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 290 or Fe 310-0 complete all as specified and directed. |
| 132 | S&F steel windows side hung with box type hinges including peg stay, lugs handle and with glazingbar dovetailed or welded complete incl one soap coat of red oxide primer complete all as specified and directed. |
| 133 | S&F steel ventilator partly fixed and party tup hung/side hung with box type hing incl peg stay, lugs handle and glazingbar complete incl one soap coat of red oxide primer complete all as specified and directed. |
| 134 | Demolition of reinforced cement concreteworks of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 135 | M&L for providing precast cementconcrete jallies, PCC 1:2:4typeB0(using 12.5mm graded stone aggregate25mm thick (measured solid)including all moulding but excludingframe and set in C:M 1:6 complete all as specified and directed. |
| 136 | M&L for RCC 1:2:4 type B-1using 20mm graded stone aggregate as in parapet wall , cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed. |
| 137 | M&L mild steel TMTbar 10 mm dia and over cut to length bent to shape required including cranking bendingandbinding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed. |
| 138 | S&F as in repair 25 mm dia mild steel PVC Coatedfancy type curtain rod including Fancy Knobs and bracket complete all as specified and directed. |
| 139 | S&F in repairstainless steel draperycurtain rodsstandard quality dia notless than 25mm withfancy type stainless steellatoo at bothends andStainless SteelBracketfor middle support as required complete all as specified and directed. |
| 140 | M&L for providing cement concrete , Type B-0 1:2:4 (12.5 mm graded aggregate ) in roof kerbs or mud stops,rounded or chamfered on edges or coping complete all as specified and directed. |
| 141 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approvedshade/tint over acoat of primer over & including white wallcare putty 1mm thick on walls complete all as specified and directed. |
| 142 | Taking out existing aluminium frame with shutter and repair ofall necessary items i.e hinge aluminium snap beading, rubber packing, glazing clip, door closer screwetc, any type of repair and making good disturbed portion of wall/floor incl refixingthe same complete all as specified anddirected. |
| 143 | S&F in repair steel rolling shutter 1.25 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer : erected in position as indicated, complete all as specified and directed. |
| 144 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 145 | S&F ball bearing for rolling shutters complete all as specified and directed. |
| 146 | Supply only lock plate made out of angle iron 35x5mm and MS block sheet 12 gaugeincluding hand madehandle, lockingarrangement etc complete ofrequiredsize, complete all as specified and directed. |
| 147 | S&F in repair CP grating doom 125mm dia complete all as specified and directed. |
| 148 | S&Fin repair 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed. |
| 149 | Supply only integral water proofing compound, ISI Marked complete all as specified and directed. |
| 150 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, complete all as specified and directed. |
| 151 | Dismantiling boarding, any descriptionfixed in any position with nails complete all as specified and directed. |
| 152 | M&L for 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 153 | S&F for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 154 | M&L for 2nd class hardwood plain fillets exc 13 & not exc 25 sqcm in sectional areasquare rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed. |
| 155 | M&L for 12 mm thick plywood grade BWR type BB, fixed withscrew totimber frame workblock board grade 2 quality interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed. |
| 156 | M&L for 6mm thick veneered decorative plywood grade1(with BWR resin) with decorative face veneers on one face fixed withscrew totimber frame work complete all as specified and directed. |
| 157 | M&L for two coats of melamine wood polish on new /old wooden wall/floor surface/wood based material including removing/cleaning and prepration of the surface including a coat of wood filler complete all as specified and directed. |
| 158 | S&F energy saving ceiling fan of 1200 mm sweep of 330-370 RPM, 220-240 volts, AC, 50 Hz, ISI marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.Make : Havells, Model: ES-50 Premium or Usha, Model: Energia Star ISI or Crompton Greaves, Model: Empower 50 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
