|
| 1 | Accessible Signages and Specialised Accessibility retrofitting items |
| 2 | Parking SignageDesign, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the \"Universal Accessibility Symbol\" and Upper case Sans Serif words ofheight 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm.Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge. |
| 3 | Building entrance and Accessible entrance signageDesign, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the \"Universal Accessibility Symbol\" and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. |
| 4 | Acrylic tactile audio mapDesign, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuildinglayout of size 2ft x 1.5ft min., of the approved design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of height not less than 12mm, with the equivalent word/s written in Hindi with acrylic cut out Devnagri letters of height not less than 12mm,raised 1 to 2mm above base plate and of the approved colour such that there is adequate visual contrast with the base plate. A multilingual audio indicating the names of the relevant spaces to be triggered on pressing the respective button. Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. |
| 5 | Overhanging directional signageDesign, supply, fabrication and fixing of acrylic, non glare multilingual overhanging signage (size 2ft x 2ft) of the approved designand having 6mm thick blue/ approved colour acrylic base plate with Upper Case San Serif made of acrylic non glare cut out letters of height not less than 30mm, raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 12mm raised not less than 0.8mm above base plate. Signage to have a relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. The signage to be installed at the specified location by suspending it from the ceiling using the hardware specified by the manufacturer and as per the direction of the engineer in charge |
| 6 | Door and Directional signage : 6\" x 9\" format (with symbols / without symbols)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6\"x 9\" for directions and room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate with Upper Case San Serif words made of acrylic non glare cut out letters of height 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised 0.8mm above base plate. Signage to have a relevant symbol made of cut out acrylic and raised by 0.8mm above base plate. Letters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. |
| 7 | Floor Directories with tactile lettersProviding and fixing acrylic multilingual Braille (raised domes) floor directories on all floors of size 1.5 ft x 2 ft , showing the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having Base plate: 4mm thick blue/ approved colour acrylic non glare Text: Upper Case San Serif words made of white acrylic non glare cut out letters of height 20mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 20mm raised 0.8mm above base plate. Symbols: Signage to have relevant symbols made of cut out acrylic and raised by 0.8mm above base plate. Arrows: Signage to have arrows pointing in the relevant direction made of cut out acrylic and raised by 3mm min. above base plateLetters, words and symbols to be white/ of the approved colour such that there is adequate visual contrast with the base plate. Braille: Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. |
| 8 | Emergency Evacuation signage (6\" x 9\" format)Design, supply, fabrication and fixing acrylic multilingual Braille (raised domes) signboards of size 6\"x 9\" emergency exits and evacuation instructions, designed as per the drawings issued and having 4mm thick green/red acrylic non glare base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height not less than 15mm raised 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height not less than 15mm raised 0.8mm above base plate. Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. |
| 9 | FIRE ORDERDesign, supply, fabrication and fixingmultilingual FIRE ORDER signage of size 700mm x 900mm made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet. Signage giving evacuation instructions during fire using black/ red/ green non glareUpper Case Sans Serif words of height not less than 15mm and the equivalent translation written in Hindi using Devnagri non glare black letters of height not less than 15mm , designed as per the drawings issued. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge. |
| 10 | Emergency evacuation map: non photoluminiscentProviding and installing an Emergency evacuation map of each floor indicating the current position of the viewer saying \"YOU ARE HERE\" of 15mm high letters in red/ green /black with white background, indicating the emergency exits, locations of fire extinguishers etc.Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters not less than 3/4\" in height. The size of the board shall be 2ft x 2ft made out of Ecosolvent self adhesive, non-reflective, opaque vinyle print, pasted on 3mm thick PVC foam sheet, complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand shall be oriented to the position of the viewer up to the satisfaction of the engineer in charge. |
| 11 | Photoluminescent Fire exit and floor identification signage having Braille: PHOTOLUMINISCENT Fire Exit and floor identification signage of size 400 x 100mm min. made out of computer cut opaque, non reflective, self adhesive vinyle letters, pasted on a self adhesive photoluminiscent film, pasted on 3mm thick PVC foam sheet, having a 2mm acrylic baseplate. Signage to be of the approved colour. Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI.complete with wall mounting arrangements with mirror fasteners and shall be installed at a height of 1200mm from FFLand up to the satisfaction of the engineer in charge. |
| 12 | Anodised Aluminium Braille indicators with SS-304 cable fasteners for handrails Providing and fixing 0.5 mm thick Anodised Aluminiumpre rolled signs of size 100mm x 80mm to fit any handrail circumference with hygeinically clean pressed aluminium with no add ons that can be picked off or removed and having the required word written in Grade 1 Braille (raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI) raised by 0.6mm to 0.9mm above base plate. To be installed in place around the handrail using SS-304 cable ties of dimension 7.9mm x 200mm with press fit mechanism. |
| 13 | Braille Buttons for elevatorProviding and fixing SS 304buttons of the required finish and of 1mm thickness and size 15mm x 30mm, in the elevator, having 1mm embossing (min.) of the floor number and the equivalent number written below in Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, raised by 0.6 to 0.9mm above base plate and to be installed as per the manufacturers instructions using the specified adhesive and hardware upto the satisfaction of the engineer in charge |
| 14 | Door signage : 6\" x 3\" format (without symbols, without text, only Braille)Design, supply, fabrication and fixing acrylicBraille (raised domes) signboards of size 6\"x 3\" for room titles, designed as per the drawings issued and having 4mm thick blue/ approved colour acrylic non glare base plate. Grade 1 Braille consisting of SS rasters of 1.5 to 1.6mm dia. having rounded tops inserted by a raster pen or automatic insertion tool into the holes made by a rotary engraver to be integral with the sign face and be raised 0.6 to 0.9mm above base plate. Braille spacing to be as per Braille standards given by GOI. Each signboard to be fixed using double sided bonding tape of 3M/ equivalent brand or mirror screws, at 1200mm from FFL and up to the satisfaction of the engineer in charge.\" |
| 15 | Designing and installing in location as specified by Access Consultant / Engineer in charge, navigation and wayfinding system such as IWAYPLUS or equivalent to assist PwDs , especailly PWVI . The localisation and position system is based on state of art BLE technology. The system will comply with WACG3 standards for micro captioning as per ITU.921 IABNNS standards. Scope includes creation of digital map and AI based auto routing algorithms for wayfinding to guide a user within the building. |
| 16 | Stainless Steel grab bars for accessible toilet comprising of 1 l shaped grab bar, 1 straight grab bar, 1 swing type grab bar |
