Construction Of Village Internal Road At Hatola Taluka Washi District Osmanabad
Tender Value
8.32 Lakhs
Estimated cost
Bid Submission
13 Dec 2023
0 days left
EMD
8329
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Village Internal Road At Hatola Taluka Washi District Osmanabad
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Supplying trap/granite/quartzite / gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). Additional Spec. No. As directed by Engineer-in-charge (SSR 22-23 It.No.50.56 ) |
| 2 | Item No.2:- Supplying hard murum / kankar at the road site, including conveying and stacking complete. (SSR 22-23 It.No.2.29a) |
| 3 | Item No.3:-Spreading 80/40 mm metal for road work including sectionong etc complete as directedby Engineer in charge(SSR 22-23 I.No.50.58 ) |
| 4 | Item No.4: Spreading hard murum / soft murum / gravel or kankar for side width complete ( SSR 22-23 It.No.2.30 ) |
| 5 | Item No.5:-Compacting the sub grade/ gravel / oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials andartificial watering complete.Additional Spec. No. As directed by Engineer-in-charge (SSR 22-23 It.No.50.59 ) |
| 6 | Item No.6:- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in- charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Additional Spec. No. MORTH 601 (SSR 22-23 It.No.5.13 ) |
| 7 | Item No.7:-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) Additional Spec. No.BR.47(a) Page Number 140 and B. 7, Page Number38 (SSR 22-23 It.No.14.39) |
| 8 | Item No.8:-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 22-23 It.No.6.36) |
| 9 | Item No.9: Charges for testing of material in vigilance and quality control labroatory for concrete compressive strength of C.C. Cube ( Set of 3 cubes) Rate as per SSR 22-23 Sr.No.19 P.No.584 |
| 10 | Item No.10: Charges for testing of material in vigilance and quality control laboratory for Metal Sieve Analysis) SSR 22-23 Pg.No.580 Sr.No.03 |
| 11 | Item No.11: Royalty charges b) For all other Minerals= Royalty + surcharge (2%) = 211.95 + 4.23 = 216.18 per cum. As per SSR 2022-23 Section V Page No.3 |
AI Tender Summary
Tender Timeline
Dec 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender