Repair Renovation And Upgradation Of 5 Nos Icds Centre Through Conceptualizing Building As Learning Aid Mode At Kumargram Block
Tender Value
10.39 Lakhs
Estimated cost
Bid Submission
20 Dec 2023
0 days left
EMD
20795
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumargram → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Renovation And Upgradation Of 5 Nos Icds Centre Through Conceptualizing Building As Learning Aid Mode At Kumargram Block
BOQ
| Sl. No. | Item Description |
| 1 | Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety. In ground floor, (a) 1:3:6 proportion |
| 2 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging whereecessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar, (a) 20 mm thick plaster (Inside wall). |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging whereecessary (Ground floor).[Excluding cost of chipping over concrete surface With 1:4 cement mortar, (b) 15 mm thick plaster |
| 4 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 5 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local. |
| 6 | Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as perdirection of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.(A) Shutter with 25mm thick planks, 19mm thick battens.(iii) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak. |
| 7 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 8 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) asper direction. (Cost of concrete will be paid separately),(a) 40mm X 6mm, 250mm Length |
| 9 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. |
| 10 | Iron socket bolt of approved quality fitted and fixed complete.(b) 100mm long x 10mm dia bolt. 300 mm long |
| 11 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 12 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod). (vi) 150 mm grip x 10 mm dia rod. |
| 13 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 14 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(ii) Two coats (white in shade), With super gloss (hi-gloss) - |
| 15 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : :(ii) Two coats (white in shade), With super gloss (hi-gloss) - |
| 17 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr\"s hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finishomplete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).a) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N |
| 18 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall:- With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m, (i) Coloured decorative. |
| 19 | Drawing Art/Logo and wall writing as per instruction including cost of paint & others |
| 20 | Supplying, fitting & fixing of Toys & others playing equipmens for children |
| 21 | Add sanitary & plumbing payment will be paid as per PWD SOR |
| 22 | Add GST @ 18% |
| 23 | Add Labour welfare Cess @ 1% |
AI Tender Summary
Tender Timeline
Dec 05, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender