Tender For Renovation Of Pump House, Pipe Line, Electrical Wiring, Supply And Delivery Of Necessary Materials At Dakshin Debogram Dtw (344/M) Under Sagardighi Block Of Murshidabad District Under E.E.(A-I), Berhampore-Ii (A-I) Division Under Core-Sector Pr, Murshidabad-West Bengal

Tender For Renovation Of Pump House, Pipe Line, Electrical Wiring, Supply And Delivery Of Necessary Materials At Dakshin Debogram Dtw ( 344 / M ) Under Sagardighi Block Of Murshidabad District Under E.E. ( A-I ) , Berhampore-Ii ( A-I ) Division Under Core-Sector Programme For The Year 2023-24.- 1 PUMP HOUSE:Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. 2 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. 3 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 Single brick flat soling of picked jhama bricks including ramming & dressing bed to proper level and filling joints with powered earth or local sand. 5 Ordinary Cement concrete(1:2:4) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevant IS codea) Pakur Variety . 6 Brick work in cement mortar(1:6) with 1st class bricks including raking out joints, scaffolding and other incidental works etc. complete. 7 b ) In superstructure 8 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]. 9 12.5 cm thick 1st class brick work in cement mortar(1:4) in ground floor including scaffolding, raking out joints etc complete. 10 Hire &labour charges for shuttering with centering & necessary staging upto 4 meter using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete slab beams, columns, lintels, curved or straight including fitting, fixing striking out after completion of works (upto roof of ground floor) 25mm to 30mm thick wooden shuttering. 11 Reinforcement for reinforced concrete work in all sorts of structure including distribution bar, stirrups, binders etc. including supply of rods, lintels, straightening of bend bars excluding coil bars & removalof loose rust (if necessary) cutting to requisite length, hooking bending to correct shape placing in proper position & binding with 1.626mm (16 SWG) black annealed wire at every enter sectioncomplete as per drawing & direction including cost of wire upto 1st floor level.ii) For Tor steel.@ 1.2% steel will be required of cement concrete .a) JSW/JSPL/SHYAM/SRMB 12 Cement concrete in foundation, floor and all sorts of RCC works with approved graded stone chips (20mm size) excluding shuttering & reinforcement if any, in ground floor .(a) 1:1.5:3proportion. 13 M.S or W.I. ornamental grill of approved design joints continuously welded wwwith M.S. W.I. flats Bar for windows , railings etc. fitted andfixed with necessary screws and lugs in ground floor Grill weighing above 12 kg/ sqm. Up to 16 kg/ sqm. 14 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. 15 Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or amfering corners as directed & raking out joint or roughing of concrete surface including hroating, nosing 7 drip course as necessary at ground floor. 16 20 mm thick plaster (1:6) cement morter 17 10 mm th. Plaster (1:4) cement morter 18 ASF stone in floor ,dado,staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary white cement (as necessary) and marble dust (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurrybefore flooring works using cement @ 1.75 kg/ sqm. Including all materials and labour 25 mm th. 19 Neat cement punning about 1.5mm thick in wall, dado, floor drain,door & window sill etc. complete. 20 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturers specification In G.L. ( two coats) 21 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 22 Painting with best quality synthetic enamel paint of approved make & brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary On steel or other metal surface.(b) On steel or other metal surface :With super gloss (hi-gloss) -Two coats with any shade except white 23 PIPE LINE :Earthwork in excavation of foundationtrenches or drains in all sorts of soil including mixed soil butexcluding laterite and sand stone), including removing, spreading or stacking the spoils with in a lead of 75 m. as directed trimming the sides of trenches, leveling, dressing and ramming the bottoms, bailing or pumping out of water etc. as required complete.Depth of excavation not exceeding 1.5 metre (not required shoring) 24 Earth work in exavation of field trenches as per designed section &alignment for laying of pipe lines (PVC,RCC,ACP etc)upto a depth of 1500 mm in all sorts of soils including removing ,spreading or stracking extra earth as directrd. The item includesnecessary trimming of side trenches levelling, dressing and ramming the bottom as required complete 25 Earthwork in filling in tranches after laying pipe lines (PVC,RCC,ACP etc.)with good earth obtained from exavation of field trenches in layer not exceeding 225mm, including watering &ramming etc layer by layer complete(payment will be made on the basis of measurement of finished quantity of work) 26 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 27 Laying of PVC pipes of different dia within field trenches in curve/ straight line using PVC fitting viz. bend, Tee, Reducer, etc. and making leak proof joints with coupler after roughening the surface with wire brush and emery paper and applying solvent cement(The rate is inclusive of transport of pipes, fittings,and solvent cement to be supplied) all complete as per direction of EIC. 28 200 mm dia pipe 29 140 mm dia pipe 30 Single brick flat soling of picked jhama bricks including ramming & dressing bed to proper level and filling joints with powered earth or local sand. 31 Reinforcement for reinforced concrete work in all sorts of structure including distribution bar, stirrups, binders etc. including supply of rods, lintels, straightening of bend bars excluding coil bars & removalof loose rust (if necessary) cutting to requisite length, hooking bending to correct shape placing in proper position & binding with 1.626mm (16 SWG) black annealed wire at every enter sectioncomplete as per drawing & direction including cost of wire upto 1st floor level.ii) For Tor steel.@ 1.2% steel will be required of cement concrete .a) JSW/JSPL/SHYAM/SRMB 32 Ordinary Cement concrete(1:2:4) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevant IS codea) Pakur Variety . 33 Cement concrete in foundation, floor and all sorts of RCC works with approved graded stone chips (20mm size) excluding shuttering & reinforcement if any, in ground floor .(a) 1:1.5:3proportion. 34 Brick work in cement mortar(1:6) with 1st class bricks including raking out joints, scaffolding and other incidental works etc. complete. 35 a) In foundation & Plinth 36 12.5 cm thick 1st class brick work in cement mortar(1:4) in ground floor including scaffolding, raking out joints etc complete. 37 Hire &labour charges for shuttering with centering & necessary staging upto 4 meter using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete slab beams, columns, lintels, curved or straight including fitting, fixing striking out after completion of works (upto roof of ground floor) 25mm to 30mm thick wooden shuttering. 38 Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or amfering corners as directed & raking out joint or roughing of concrete surface including hroating, nosing 7 drip course as necessary at ground floor. 39 20 mm thick plaster (1:6) cement morter 40 Neat cement punning about 1.5mm thick in wall, dado, floor drain,door & window sill etc. complete. 41 Labour charges for fitting, fixing150 mm. Dia. Alfa-AIfa valve with 160mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete. 42 Erection, fitting, fixing of set of M S Quadruped inlet and outlet pipe fittings for HDTW I MIDI RLI Scheme.(Rate inclusive of transportation from departmental store to work site. 43 Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. 44 150mm. dia. ERW pipe. 45 150mm. dia. C.I. sluice valve 46 Testing of pipe line system against leakage by filling the distribution chamber with water and supplying water through end pipe line network for atleast 4 (four) hours including hiring and transport of suitable generator, pump, tools and plants, fuel and lubricantsinstallation of the pump connection the same with pipe line network. 47 Labour charges for fitting. fixing M.S. Special bend with 160 mm X 200 mm. dia. P.V.C. reducer with the help of flanged tail-piece by joining P.V.C. end of tail-piece and 160 mm. end of reducer with coupler and flanged end of tail-piece and special bend with rubber insertion, nuts and bolts complete. 48 Labour charges for fitting and fixing 200mmx200mmx160 mm , 140mmx140mmx160mm, 110 mm X 110 mm X 160 mm PVC Tee with 150mm dia. M.S. extension piece by using PVC tail piece. 49 Supplying, fitting and fixing including transportation of Sign Board for identifying the exact location of MINI RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C. 50 Electrical Wiring: Supplying and fitting, fixing of E.I. Danger board on wall (a) 20 cm x 30 cm 51 Meter loop connection with 1.1 K.v. Gr. 3.5 core 14 core 10 Sqmm to 50 Sqmm p.v.C./ XLPE insulated & sheathed and armoured Aluminium/Copper Cable from Meter to incomming TPN Main Switch/Terminal (Brand: Gloster/Havells/Finolex) (a) ForDHTW/MDTW/RLI Scheme (i) 25sqmm 3.5 coreAlluminium cable 52 Earthing with 50 mm ( 2” ) dia. G I pipe 3.64 mm thick X 3.04 mtrs. ( 10 ft. ) long and 1x 4 SWG G.I. (Hot Dip) wire ( 4 mtrs. long) 13 mm dia x 80mm. long G.I. bolts double nuts and double washers including supplying and fitting 15 mm. dia. G.I. pipe protection( 1 mtr. long ) to be filled with bitumen , partly under the ground level and partly above the ground level driven to an average depth of 3.65 m below the ground level and restoring the surface duly by ISI Medium G.I Pipe 53 Supplying and fixing earth bushbar of galvanized (Hot Dip) M.S. flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bushbar complete with G.I. bolts , nuts , washers , spacing insulators etc. as required for tapping. 54 Connecting the equipments to earth bushbar including supplying and fixing G.I (Hot Dip) wire of size as below on wall / floor with staples buried inside wall / floor as required and making connection to equipment with bolts , nuts , washers , cable lugs etc. as required and mending good all damages. 8 SWG 55 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unshealhed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit FR ( Precision make ) including necessary fittings as required a) 2 x 84/0.3 (6 sqmm) +1 x 56/.03(4 sq mm) ECC 56 Distribution wiring in 1.1 KV grade 2 x 22 / 0.30 ( 1.5 sq. mm ) single core stranded ‘ FR ’ PVC insulated and unsheathed copper wire ( Brand approved by EIC ) in suitable size PVC casing capping ( precision make ) with 1 x 22 / 0.30 ( 1.5 sq mm ) single core stranded ‘FR ’ PVC insulated and unsheathed copper wire for ECC including necessary PVC clips ,fittings etc. to light / fan / call bell point with piano key type switch ( Anchor make ) fixed on sheet metal fabricated switch board with Perspex / Bakelite top cover on wall including necessary connection and making earthing attachment and mending good damages to building works ( PVC casing capping and switch board both on surface ) b) Average run 5 meter. 57 Distribution wiring in 1.1 KV grade 2 x 22 / 0.30 ( 1.5 sq. mm ) single core stranded ‘ FR ’ PVC insulated and unsheathed single core standard copper wire ( Brand approved by EIC ) in suitable size PVC casing capping ( precision make ) with 1 x 20 / 0.30 ( 1.5 sq mm ) single core stranded ‘FR ’ PVC insulated and unsheathed copper wire for ECC including necessary PVC clips , fittings etc. to 5 A 3 Pin flush type plug socket with piano key type switch ( Anchor make ) fixed on sheet metal fabricated CRC MS switch board with Perspex / Bakelite ( wall matching colour) top cover of 3 mm th. Flushed in wall by housing the board after cutting brick wall including necessary connection making earthing attachment , painting and mending good damages to building works ( PVC casing capping and switch board on both surface ) a) On Board 58 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unshealhed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduct FR ( Precision make ) including necessary fittings as required a) 2 x36/0.3 (2.5 sqmm) +1 x22/.03(1.5 sq mm) ECC (Domestic Main Switch Loop Connection from Pump Controller to Domestic Main Switch) 59 Fitting & fixing of Pump Controller (20 HP capacity) of size 950 mm x1000 mm x 450 mm over iron legs (600 mm height) on floor with 150 mm thick Cement Concrete (4:2:1) block and making necessary connection with the electrical cables as per direction of the E.I.C. (excluding cost of Cement Concrete) 60 Supplying, fitting & fixing 350 mm x 250 mm x 25 mm size Wooden plank on wall (for lifting & fixing of electrical ewuipments as necessary on the plank) 61 Supplying, Fixingangular batten holder ( Anchor) on 75 mm dia PVC round block / round bakelite on Wall/ceiling. 62 Supplying ,Fitting and fixing bulk head light fitting (Havells make ) with die cast aluminium housing and frosted glass on wall/ceiling including supplying and fitting 8 Watt CFL/100Watt. GLS lamp complete set 63 Finishing the end of following XPLE/PVC armoured cables by crimping method including supply and fitting solderless socket (Dowels make) tapes, anticorrosive paste & joining materials 4 core 16 sqmm cable. 64 Insulation testing of internal wiring of Pump House/Kiosk Box including wiring of electric Motor & other anciary equipments by means of Megger. 65 M.S. structural works in columns , beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS:808 & SP(6)-1964 connected to one another with bracket, gusets, cleats as per design, direction of Engineer-in-Charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1969 & IS 1995 using electrodes of approved make and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as elctrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricuty charges, labour insurance charges etc. Note:M.S. frame for lifting, fixing of Starter/Main Switch/Pump Controlleretc. made with minimum 40 mm X 40 mm x 5 mm M.S. angles and or 25 mm x 5 mm M.S. flats with necessary screwing & holes arrangements of minimum 750 mm 500 mm of size with priming and painting Minimum clearance from wall should be 75 mm. 66 Jointing water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper jointing compound /valcanized rubber tape so that prope water proof insulation is assured. 67 Drawing submersible cable of motor and pump in 32 mm dia. G.I. conduit 18 SWG upto pump controller making necessary connection and also drawing 8 SWGG.I wire for earthing attachment by f cutting / laying on the floor and mending good damages. 68 Supplying, fitting & fixing G.I. pipe of TATA make with all neceaary acessories specials, viz. socket bend, tee union, cross elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc, fitted with holder bats clamps, including cutting pipes , making threads, lifting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground.( No seperate payment will be made for accessories, specials) 32 mm dia medium quality. 69 Fixing only 63 amp. 500 volts T.P.N.I.C. Main switch (to be supplied Departmentally ) on iron leg on wall as per direction of the EIC 70 Supplying and fitting and fixing 250 volts 16 amp. D.P. Iron clad Main Switch of approved make with rewire able type fuses on live sides and neutral linked on iron leg on wall as per direction. (Havels make.) 71 Supplying and fitting and fixing sheet metal ( 16 SWG ) panel box on iron frame on wall including earthing attachment and painting as required with hinged front door ( Dimension of box:-500 mm x 150 mm )suitable for 450 v , 63 Amp. Equipmen 72 Fixing Ammeter / Voltmeter with necessary screws and other fixing materials including making holeswhere necessary and making connection. 73 Supllying and fitting fixing of indicator lamp. 74 SUPPLY WORK: Supply and Delivery of GI set Distribution chamber, all materials ISI marked (As per approved existing drawing & technical specification)Quadruped set for HDTW 75 Supply and delivery of Sluice with hand wheel, ISI marked, IS: 14846150 mm Dia 76 Supply and delivery of Alfa Alfa Valve(C-type) with hand wheel 01 no. for 04 nos. valve(As per approved. Existing drawing) 77 Supply and delivery of 150 mm dia 90º G.I bend both ends flanged ISI marked, IS-1239, Galv-4736 (with Priming arrangement) 78 Supply and delivery of 150 mm dia Galv. MS Flanged Pipe ISI marked, IS:1239, Galv-4736 ( 4.8 mm thick) 79 Supply and delivery of foundation bolt with washer for Distribution chamber. 80 Supply and Delivery of Nuts & Bolts 81 M 20x80 mm. 82 M 20x100 mm. 83 M.16x65 mm 84 M 16x100 mm 85 M 16x 50 mm 86 Supply of Compresed Asbestos fibre jointing for Quadruped & Tripod set (for raised surface of Flange as per IS-6392)500 mm dia (Table-5) 87 Supply of Rubber Insertion (for raised surface of Flange as per IS-6392) 88 150 mm dian(Table-17) 89 Supply and Delivery of UPVC pipes (class-I) IS: 4985/2000 certification marked with latest amendments lvorycoloured end plane, along with one matching coupler / socket (class-II ) duly IS: 10124/ 1988 marked and required solvent cement duly IS: 14182/1994 marked for each pipe. Length of eatch straight pipes 6 meters with tolerance (+) 10 mm upto the destination point inclusive of all charges. 90 i) 200 mm dia (class-I) 91 i) 140 mm dia (class-I) 92 i) 160 mm dia (class-II) 93 Supply and Delivery of UPVC coupler (class-I) IS: 10124 ( part I&II) / 1988 withlatest amendments upto the destination point inclusive of all charges. 94 200 mm dia ( class-II) 95 140 mm dia ( class-II) 96 160 mm dia ( class-II) 97 Supply and Delivery of UPVC equal Tee ( Class-II) IS:10124 (part-5)/ 1988 with latest amendments upto the destination point inclusive of all charges. 98 200 mm dia ( class-II) 99 140 mm dia (class-II) 100 Supplying of UPVC Flanged Tail Piece( Class-II) IS:10124 (part-5)/ 1988 with latest amendments upto the destination point inclusive of all charges. 101 160 mm dia flanged tail piece 102 Supplying of UPVC bend (class-II) IS: 10124 (part-8) / 1988 with latest amentsupto the destination point inclusive of all charges. 103 200 mm dia 90 bend 104 140mm dia 90 bend 105 Supply and Delivery of reducer comprising of two straight reducer IS: 10124 (part-8) / 1988 with latest amendments upto the destination point inclusive of all charges. 106 200 x 160 mm dia UPVC reducer 107 140 x 160 mm dia UPVC reducer 108 Supply and Delivery of end cap (class-III) IS: 10124 (part-4) / 1988 with latest amendments upto the destination point inclusive of all charges. 109 140 mm dia 110 Supply and Delivery of solvent cement (havy bodied) 111 Extra rate allowed over scheduled rate considering remote places away from town @ 3% fromitem no.1 to 19 except item no. 1 & 2 112 Extra rate allowed over scheduled rate considering remote places away from town @ 4% from item no. 20 to 40 except item no. 20,21, 22 & 40 113 Extra rate allowed over scheduled rate for Murshidabad @ 5% from item no. 41 to 64except item no. 42, 50,51, 55, 56, 57,58, 59 114 Add GST @ 18% on item no. 1 to 64 and 82 to 84 115 Add CESS @ 1% on item no. 1 to 64 and 82 to 85

Refer document

INR 50000.0 /-

INR 24.54 Lakhs /-

Name of Work: Renovation of pump house, pipe line, Electrical wiring, Supply and Delivery of necessary materials at Dakshin Debogram DTW (344/M) under Sagardighi Block of Murshidabad District under E.E.(A-I), Berhampore-II (A-I) Division under Core-Sector programme for the year 2023-24.

Sl. No.	Item Description
1	PUMP HOUSE: Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.
2	Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.
3	Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
4	Single brick flat soling of picked jhama bricks including ramming & dressing bed to proper level and filling joints with powered earth or local sand.
5	Ordinary Cement concrete(1:2:4) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevant IS codea) Pakur Variety .
6	Brick work in cement mortar(1:6) with 1st class bricks including raking out joints, scaffolding and other incidental works etc. complete.
7	b ) In superstructure
8	25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency].
9	12.5 cm thick 1st class brick work in cement mortar(1:4) in ground floor including scaffolding, raking out joints etc complete.
10	Hire &labour charges for shuttering with centering & necessary staging upto 4 meter using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete slab beams, columns, lintels, curved or straight including fitting, fixing striking out after completion of works (upto roof of ground floor) 25mm to 30mm thick wooden shuttering.
11	Reinforcement for reinforced concrete work in all sorts of structure including distribution bar, stirrups, binders etc. including supply of rods, lintels, straightening of bend bars excluding coil bars & removalof loose rust (if necessary) cutting to requisite length, hooking bending to correct shape placing in proper position & binding with 1.626mm (16 SWG) black annealed wire at every enter sectioncomplete as per drawing & direction including cost of wire upto 1st floor level.ii) For Tor steel.@ 1.2% steel will be required of cement concrete .a) JSW/JSPL/SHYAM/SRMB
12	Cement concrete in foundation, floor and all sorts of RCC works with approved graded stone chips (20mm size) excluding shuttering & reinforcement if any, in ground floor .(a) 1:1.5:3proportion.
13	M.S or W.I. ornamental grill of approved design joints continuously welded wwwith M.S. W.I. flats Bar for windows , railings etc. fitted andfixed with necessary screws and lugs in ground floor Grill weighing above 12 kg/ sqm. Up to 16 kg/ sqm.
14	Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.
15	Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or amfering corners as directed & raking out joint or roughing of concrete surface including hroating, nosing 7 drip course as necessary at ground floor.
16	20 mm thick plaster (1:6) cement morter
17	10 mm th. Plaster (1:4) cement morter
18	ASF stone in floor ,dado,staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary white cement (as necessary) and marble dust (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurrybefore flooring works using cement @ 1.75 kg/ sqm. Including all materials and labour 25 mm th.
19	Neat cement punning about 1.5mm thick in wall, dado, floor drain,door & window sill etc. complete.
20	Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification In G.L. ( two coats)
21	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
22	Painting with best quality synthetic enamel paint of approved make & brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary On steel or other metal surface. (b) On steel or other metal surface : With super gloss (hi-gloss) - Two coats with any shade except white
23	PIPE LINE : Earthwork in excavation of foundationtrenches or drains in all sorts of soil including mixed soil butexcluding laterite and sand stone), including removing, spreading or stacking the spoils with in a lead of 75 m. as directed trimming the sides of trenches, leveling, dressing and ramming the bottoms, bailing or pumping out of water etc. as required complete.Depth of excavation not exceeding 1.5 metre (not required shoring)
24	Earth work in exavation of field trenches as per designed section &alignment for laying of pipe lines (PVC,RCC,ACP etc)upto a depth of 1500 mm in all sorts of soils including removing ,spreading or stracking extra earth as directrd. The item includesnecessary trimming of side trenches levelling, dressing and ramming the bottom as required complete
25	Earthwork in filling in tranches after laying pipe lines (PVC,RCC,ACP etc.)with good earth obtained from exavation of field trenches in layer not exceeding 225mm, including watering &ramming etc layer by layer complete(payment will be made on the basis of measurement of finished quantity of work)
26	Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
27	Laying of PVC pipes of different dia within field trenches in curve/ straight line using PVC fitting viz. bend, Tee, Reducer, etc. and making leak proof joints with coupler after roughening the surface with wire brush and emery paper and applying solvent cement(The rate is inclusive of transport of pipes, fittings,and solvent cement to be supplied) all complete as per direction of EIC.
28	200 mm dia pipe
29	140 mm dia pipe
30	Single brick flat soling of picked jhama bricks including ramming & dressing bed to proper level and filling joints with powered earth or local sand.
31	Reinforcement for reinforced concrete work in all sorts of structure including distribution bar, stirrups, binders etc. including supply of rods, lintels, straightening of bend bars excluding coil bars & removalof loose rust (if necessary) cutting to requisite length, hooking bending to correct shape placing in proper position & binding with 1.626mm (16 SWG) black annealed wire at every enter sectioncomplete as per drawing & direction including cost of wire upto 1st floor level.ii) For Tor steel.@ 1.2% steel will be required of cement concrete .a) JSW/JSPL/SHYAM/SRMB
32	Ordinary Cement concrete(1:2:4) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevant IS codea) Pakur Variety .
33	Cement concrete in foundation, floor and all sorts of RCC works with approved graded stone chips (20mm size) excluding shuttering & reinforcement if any, in ground floor .(a) 1:1.5:3proportion.
34	Brick work in cement mortar(1:6) with 1st class bricks including raking out joints, scaffolding and other incidental works etc. complete.
35	a) In foundation & Plinth
36	12.5 cm thick 1st class brick work in cement mortar(1:4) in ground floor including scaffolding, raking out joints etc complete.
37	Hire &labour charges for shuttering with centering & necessary staging upto 4 meter using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete slab beams, columns, lintels, curved or straight including fitting, fixing striking out after completion of works (upto roof of ground floor) 25mm to 30mm thick wooden shuttering.
38	Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or amfering corners as directed & raking out joint or roughing of concrete surface including hroating, nosing 7 drip course as necessary at ground floor.
39	20 mm thick plaster (1:6) cement morter
40	Neat cement punning about 1.5mm thick in wall, dado, floor drain,door & window sill etc. complete.
41	Labour charges for fitting, fixing150 mm. Dia. Alfa-AIfa valve with 160mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete.
42	Erection, fitting, fixing of set of M S Quadruped inlet and outlet pipe fittings for HDTW I MIDI RLI Scheme.(Rate inclusive of transportation from departmental store to work site.
43	Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge.
44	150mm. dia. ERW pipe.
45	150mm. dia. C.I. sluice valve
46	Testing of pipe line system against leakage by filling the distribution chamber with water and supplying water through end pipe line network for atleast 4 (four) hours including hiring and transport of suitable generator, pump, tools and plants, fuel and lubricantsinstallation of the pump connection the same with pipe line network.
47	Labour charges for fitting. fixing M.S. Special bend with 160 mm X 200 mm. dia. P.V.C. reducer with the help of flanged tail-piece by joining P.V.C. end of tail-piece and 160 mm. end of reducer with coupler and flanged end of tail-piece and special bend with rubber insertion, nuts and bolts complete.
48	Labour charges for fitting and fixing 200mmx200mmx160 mm , 140mmx140mmx160mm, 110 mm X 110 mm X 160 mm PVC Tee with 150mm dia. M.S. extension piece by using PVC tail piece.
49	Supplying, fitting and fixing including transportation of Sign Board for identifying the exact location of MINI RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C.
50	Electrical Wiring: Supplying and fitting, fixing of E.I. Danger board on wall (a) 20 cm x 30 cm
51	Meter loop connection with 1.1 K.v. Gr. 3.5 core 14 core 10 Sqmm to 50 Sqmm p.v.C./ XLPE insulated & sheathed and armoured Aluminium/Copper Cable from Meter to incomming TPN Main Switch/Terminal (Brand: Gloster/Havells/Finolex) (a) ForDHTW/MDTW/RLI Scheme (i) 25sqmm 3.5 coreAlluminium cable
52	Earthing with 50 mm ( 2” ) dia. G I pipe 3.64 mm thick X 3.04 mtrs. ( 10 ft. ) long and 1x 4 SWG G.I. (Hot Dip) wire ( 4 mtrs. long) 13 mm dia x 80mm. long G.I. bolts double nuts and double washers including supplying and fitting 15 mm. dia. G.I. pipe protection( 1 mtr. long ) to be filled with bitumen , partly under the ground level and partly above the ground level driven to an average depth of 3.65 m below the ground level and restoring the surface duly by ISI Medium G.I Pipe
53	Supplying and fixing earth bushbar of galvanized (Hot Dip) M.S. flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bushbar complete with G.I. bolts , nuts , washers , spacing insulators etc. as required for tapping.
54	Connecting the equipments to earth bushbar including supplying and fixing G.I (Hot Dip) wire of size as below on wall / floor with staples buried inside wall / floor as required and making connection to equipment with bolts , nuts , washers , cable lugs etc. as required and mending good all damages. 8 SWG
55	Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unshealhed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit "FR" ( Precision make ) including necessary fittings as required a) 2 x 84/0.3 (6 sqmm) +1 x 56/.03(4 sq mm) ECC
56	Distribution wiring in 1.1 KV grade 2 x 22 / 0.30 ( 1.5 sq. mm ) single core stranded ‘ FR ’ PVC insulated and unsheathed copper wire ( Brand approved by EIC ) in suitable size PVC casing capping ( precision make ) with 1 x 22 / 0.30 ( 1.5 sq mm ) single core stranded ‘FR ’ PVC insulated and unsheathed copper wire for ECC including necessary PVC clips ,fittings etc. to light / fan / call bell point with piano key type switch ( Anchor make ) fixed on sheet metal fabricated switch board with Perspex / Bakelite top cover on wall including necessary connection and making earthing attachment and mending good damages to building works ( PVC casing capping and switch board both on surface ) b) Average run 5 meter.
57	Distribution wiring in 1.1 KV grade 2 x 22 / 0.30 ( 1.5 sq. mm ) single core stranded ‘ FR ’ PVC insulated and unsheathed single core standard copper wire ( Brand approved by EIC ) in suitable size PVC casing capping ( precision make ) with 1 x 20 / 0.30 ( 1.5 sq mm ) single core stranded ‘FR ’ PVC insulated and unsheathed copper wire for ECC including necessary PVC clips , fittings etc. to 5 A 3 Pin flush type plug socket with piano key type switch ( Anchor make ) fixed on sheet metal fabricated CRC MS switch board with Perspex / Bakelite ( wall matching colour) top cover of 3 mm th. Flushed in wall by housing the board after cutting brick wall including necessary connection making earthing attachment , painting and mending good damages to building works ( PVC casing capping and switch board on both surface ) a) On Board
58	Distribution wiring in 1.1 KV single core stranded "FR" PVC insulated & unshealhed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduct "FR" ( Precision make ) including necessary fittings as required a) 2 x36/0.3 (2.5 sqmm) +1 x22/.03(1.5 sq mm) ECC (Domestic Main Switch Loop Connection from Pump Controller to Domestic Main Switch)
59	Fitting & fixing of Pump Controller (20 HP capacity) of size 950 mm x1000 mm x 450 mm over iron legs (600 mm height) on floor with 150 mm thick Cement Concrete (4:2:1) block and making necessary connection with the electrical cables as per direction of the E.I.C. (excluding cost of Cement Concrete)
60	Supplying, fitting & fixing 350 mm x 250 mm x 25 mm size Wooden plank on wall (for lifting & fixing of electrical ewuipments as necessary on the plank)
61	Supplying, Fixingangular batten holder ( Anchor) on 75 mm dia PVC round block / round bakelite on Wall/ceiling.
62	Supplying ,Fitting and fixing bulk head light fitting (Havells make ) with die cast aluminium housing and frosted glass on wall/ceiling including supplying and fitting 8 Watt CFL/100Watt. GLS lamp complete set
63	Finishing the end of following XPLE/PVC armoured cables by crimping method including supply and fitting solderless socket (Dowels make) tapes, anticorrosive paste & joining materials 4 core 16 sqmm cable.
64	Insulation testing of internal wiring of Pump House/Kiosk Box including wiring of electric Motor & other anciary equipments by means of Megger.
65	M.S. structural works in columns , beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS:808 & SP(6)-1964 connected to one another with bracket, gusets, cleats as per design, direction of Engineer-in-Charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1969 & IS 1995 using electrodes of approved make and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as elctrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricuty charges, labour insurance charges etc. Note:M.S. frame for lifting, fixing of Starter/Main Switch/Pump Controlleretc. made with minimum 40 mm X 40 mm x 5 mm M.S. angles and or 25 mm x 5 mm M.S. flats with necessary screwing & holes arrangements of minimum 750 mm 500 mm of size with priming and painting Minimum clearance from wall should be 75 mm.
66	Jointing water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper jointing compound /valcanized rubber tape so that prope water proof insulation is assured.
67	Drawing submersible cable of motor and pump in 32 mm dia. G.I. conduit 18 SWG upto pump controller making necessary connection and also drawing 8 SWGG.I wire for earthing attachment by f cutting / laying on the floor and mending good damages.
68	Supplying, fitting & fixing G.I. pipe of TATA make with all neceaary acessories specials, viz. socket bend, tee union, cross elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc, fitted with holder bats clamps, including cutting pipes , making threads, lifting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground.( No seperate payment will be made for accessories, specials) 32 mm dia medium quality.
69	Fixing only 63 amp. 500 volts T.P.N.I.C. Main switch (to be supplied Departmentally ) on iron leg on wall as per direction of the EIC
70	Supplying and fitting and fixing 250 volts 16 amp. D.P. Iron clad Main Switch of approved make with rewire able type fuses on live sides and neutral linked on iron leg on wall as per direction. (Havels make.)
71	Supplying and fitting and fixing sheet metal ( 16 SWG ) panel box on iron frame on wall including earthing attachment and painting as required with hinged front door ( Dimension of box:-500 mm x 150 mm )suitable for 450 v , 63 Amp. Equipmen
72	Fixing Ammeter / Voltmeter with necessary screws and other fixing materials including making holeswhere necessary and making connection.
73	Supllying and fitting fixing of indicator lamp.
74	SUPPLY WORK: Supply and Delivery of GI set Distribution chamber, all materials ISI marked (As per approved existing drawing & technical specification) Quadruped set for HDTW
75	Supply and delivery of Sluice with hand wheel, ISI marked, IS: 14846150 mm Dia
76	Supply and delivery of Alfa Alfa Valve(C-type) with hand wheel 01 no. for 04 nos. valve(As per approved. Existing drawing)
77	Supply and delivery of 150 mm dia 90º G.I bend both ends flanged ISI marked, IS-1239, Galv-4736 (with Priming arrangement)
78	Supply and delivery of 150 mm dia Galv. MS Flanged Pipe ISI marked, IS:1239, Galv-4736 ( 4.8 mm thick)
79	Supply and delivery of foundation bolt with washer for Distribution chamber.
80	Supply and Delivery of Nuts & Bolts
81	M 20x80 mm.
82	M 20x100 mm.
83	M.16x65 mm
84	M 16x100 mm
85	M 16x 50 mm
86	Supply of Compresed Asbestos fibre jointing for Quadruped & Tripod set (for raised surface of Flange as per IS-6392) 500 mm dia (Table-5)
87	Supply of Rubber Insertion (for raised surface of Flange as per IS-6392)
88	150 mm dian(Table-17)
89	Supply and Delivery of UPVC pipes (class-I) IS: 4985/2000 certification marked with latest amendments lvorycoloured end plane, along with one matching coupler / socket (class-II ) duly IS: 10124/ 1988 marked and required solvent cement duly IS: 14182/1994 marked for each pipe. Length of eatch straight pipes 6 meters with tolerance (+) 10 mm upto the destination point inclusive of all charges.
90	i) 200 mm dia (class-I)
91	i) 140 mm dia (class-I)
92	i) 160 mm dia (class-II)
93	Supply and Delivery of UPVC coupler (class-I) IS: 10124 ( part I&II) / 1988 withlatest amendments upto the destination point inclusive of all charges.
94	200 mm dia ( class-II)
95	140 mm dia ( class-II)
96	160 mm dia ( class-II)
97	Supply and Delivery of UPVC equal Tee ( Class-II) IS:10124 (part-5)/ 1988 with latest amendments upto the destination point inclusive of all charges.
98	200 mm dia ( class-II)
99	140 mm dia (class-II)
100	Supplying of UPVC Flanged Tail Piece( Class-II) IS:10124 (part-5)/ 1988 with latest amendments upto the destination point inclusive of all charges.
101	160 mm dia flanged tail piece
102	Supplying of UPVC bend (class-II) IS: 10124 (part-8) / 1988 with latest amentsupto the destination point inclusive of all charges.
103	200 mm dia 90 bend
104	140mm dia 90 bend
105	Supply and Delivery of reducer comprising of two straight reducer IS: 10124 (part-8) / 1988 with latest amendments upto the destination point inclusive of all charges.
106	200 x 160 mm dia UPVC reducer
107	140 x 160 mm dia UPVC reducer
108	Supply and Delivery of end cap (class-III) IS: 10124 (part-4) / 1988 with latest amendments upto the destination point inclusive of all charges.
109	140 mm dia
110	Supply and Delivery of solvent cement (havy bodied)
111	Extra rate allowed over scheduled rate considering remote places away from town @ 3% fromitem no.1 to 19 except item no. 1 & 2
112	Extra rate allowed over scheduled rate considering remote places away from town @ 4% from item no. 20 to 40 except item no. 20,21, 22 & 40
113	Extra rate allowed over scheduled rate for Murshidabad @ 5% from item no. 41 to 64except item no. 42, 50,51, 55, 56, 57,58, 59
114	Add GST @ 18% on item no. 1 to 64 and 82 to 84
115	Add CESS @ 1% on item no. 1 to 64 and 82 to 85