Grama Panchayat has published Tender For Purchase Of Materials. Submission Date for this Tender is 20-12-2023. Bricks Supply Tenders in Malappuram Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Stone for masonry work |
2 | wall form panel 1250x500 mm |
3 | Corner angle 45x45x5 mm 1.50 m long |
4 | 100 mm channel shoulder 2.5 m long |
5 | Double clip (bridge clip) |
6 | Single clip |
7 | M.S. Tube 40 mm dia |
8 | Second class kail wood in planks |
9 | Second class kail wood in scantling |
10 | Safeda ballies 125 mm diameter |
11 | Structural steel such as tees, angles, channels and R.S. joists |
12 | Red oxide Zinc chromate primer |
13 | Adjustable telescopic prop 3 m (2.02-3.75m) |
14 | Beam clamp 300-380 mm (450-1070 mm) |
15 | Hollock ballies 125 mm diameter |
16 | Adjustable span ESO+SI (2.35-3.40) |
17 | Royalty for good earth |
18 | Twisted steel/deformed bars |
19 | Stone Aggregate(single size):20 mm nominal size |
20 | Stone Aggregate(single size): 10 mm nominal size |
21 | Coarse sand (zone III) |
22 | Portland Cement |
23 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
24 | Vibrator (Needle type 40 mm) |
25 | Laterite stone of size 35x20x20cm |
26 | Solid blocks of size 40x20x15cm |
27 | Hollow bloks oof size 40x20x10cm |
28 | Fine sand (zone IV) |
29 | Stone Aggregate(single size): 40 mm nominal size |
30 | Vitrified floor tile 60x60 cm |
31 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
32 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
33 | Plasticizer / super plasticizer |
34 | Production cost of concrete by batch mix plant |
35 | Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. |
36 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
37 | Wall form panel 1250x450xmm |
38 | Corner angle 45x45x5 mm 2.50 long |
39 | Column clamp 450x1070 mm |
40 | Prop 2 m (2-3.5m) |
41 | Multi surface paint |
42 | Special primer (C.W) |
43 | Aluminium T or L Sections |
44 | Chromium plated Brass screws 20 mm |
45 | Powder coating 50 microns on aluminium sections |
46 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
47 | Neoprene / EPDM rubber gasket |
48 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
49 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
50 | Bright finished or black enameled mild steel screws 40 mm |
51 | Bright finished or black enameled mild steel screws 20 mm |
52 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
53 | G.I. pipes 40 mm dia |
54 | Welding by electric plant |
55 | Mild Steel round bar above 12 mm dia |
56 | Flats up to 10 mm in thickness |
57 | Vitreous China orrisa type w.c. pan size 580 mm |
58 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
59 | 100 mm S.C.I. trap with vent heel |
60 | Vitreous China flat back wash basin 630x450 mm |
61 | 15 mm C.P.brass tap |
62 | C.P. brass waste 32 mm |
63 | C.I. bracket for wash basin and sinks |
64 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
65 | Vitreous china pedestal type wate closet |
66 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
67 | Plastic emulsion paint |
68 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
69 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail