Tripura University-TU has published Tender For Construction Of 19 M Rcc Boundary Wall With Ant Climbing Grills Opposite To Energy Park At Tripura University Campus. Submission Date for this Tender is 23-12-2023. Wall construction Tenders in West Tripura Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | 2.1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
2 | 2.13 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
3 | 2.16 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
4 | 2.19 Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
5 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 4.1.15 1:4:8 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
6 | 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement -All work upto plinth level:5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
7 | 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
8 | 5.19 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete uptoplinth level. 5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
9 | 4.4 Centering shuttering including struttings, propping etc. and removal of form work for: Columns, piers, abutments, pillaras, posts and struts. |
10 | 6.2 Second class brick work in foundation and plinth including cost of all materials as required complete:6.2.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). |
11 | 6.12 Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
12 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
13 | 12.30 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.30.1 New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
14 | 9.15 Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:9.15.2 In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
15 | 12.48 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: 12.48.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
16 | 12.5 Neat cement punning. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail