Tender For Provn Of Tilling Works For 12 X Class Room, Kota Stone On Varandah In Children School At Sukna Mil Stn And Certain Other Santioned Works Under Ge Sukna In Sukna Mil Station.
Tender Value
44.71 Lakhs
Estimated cost
Bid Submission
25 Dec 2023
0 days left
EMD
89420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Tilling Works For 12 X Class Room, Kota Stone On Varandah In Children School At Sukna Mil Stn And Certain Other Santioned Works Under Ge Sukna In Sukna Mil Station.
BOQ
| Sl. No. | Item Description |
| 1 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, wall of drains, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 2 | Supplyonly integral water proofing compound complete all as specified and directed. |
| 3 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 5 | S&F in repairs 20 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed. |
| 6 | S & F in repairs galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples including wooden beadscomplete all as specified and directed. |
| 7 | S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed. |
| 8 | M&Lpowder coated Aluminium anodised door, window, Cup board and ventilator shutter and frame any type (Sliding or openable ) with frameand other similar work, fabricated aluminium mesh etc. aluminium heavy section favricated incl all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading roller wheel etc. ,complete all as specified and directed.Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent IndustriesNote: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure.(b) Wire mesh shall be measured and paid separately.(c) Aluminium hinges shall be included in the unit rate |
| 9 | M&L machine cut kota stone flooring 20-25 mm (minimum) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing and laid over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | M&Lmachine cut kota stone 20-25 mm (minimum) thick as in skirting, dado, riser of steps, plinth,etc, laid over and including 10 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the stone and including rubbing / grinding and polishing complete all as specified and directed. |
| 11 | M&L 18-20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey/ colored cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cladding, jambs, cills, including grinding, polishing, moulding & over & including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 12 | M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 13 | M&L 25 mm thick, PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) as inPCC under layer finished even and rough to receive cement screed complete all as specified and directed. |
| 14 | M&L 8-10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc.0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | M&L 8-10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc.0.36 sqm in vertical surface/ skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10 mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 16 | Taking down cement plaster on brickor concrete surfaces / ceiling, racking out joints hacking for key scrubbing downwith water etc complete all as specified and directed. |
| 17 | M & L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | M & L for 15 mm thick rendering in cement mortar 1:4 onfair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 19 | M&L preparation of new plastered wall surfaces and inlcuding applying two coats of weather coat exterior paint overa coat of primerand over a thin layer of wall care puttyto obtain smooth finish completeall as specified and directed. (Note: rate shall be included for necessary scaffolding and safety arrangement) |
| 20 | M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemperovera coat of primer and over a thin layer of wall care puttyto obtain smooth finish complete all as specified and directed. |
| 21 | M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemperovera coat of primer and over a thin layer of wall care puttyto obtain smooth finish completeall as specified and directed. |
| 22 | S&F 4.8mm thickglass including tinted/dark filmn exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. |
| 23 | S&F 4.8mm thickglass including tinted/dark film exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. |
| 24 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforced) inground floorsand pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Dec 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender