|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | A) Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity). (B) Do - by fine sand |
| 3 | Brick work with 1st class bricks in cement mortar (1:6). (a) In foundation and plinth |
| 4 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.. (i) Pakur Variety. (RCC Work) |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. (i) Tor steel/Mild Steel. II. Other than SAIL/ TATA/RINL. |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 8 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. c)15mm thick plaster (i) With 1:6 cement mortar |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 11 | White washing including cleaning and smoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction). |
| 12 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 13 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor (i) Grill weighing 18 Kg./sq.mtr. |
| 14 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 15 | Supplying & complete fitting, fixing of PVC Door Size - 2\"8\"x6\"0\" (Local Rate) |
| 16 | Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mm wood blocks and C.I brackets including two coats of painting of C.I brackets. (ii) 550mm X 400mm size. |
| 17 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 18 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm |
| 19 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe |
| 20 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia-100mm). WC Pipe |
| 21 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre. (iii) 80 mm dia. boring etc. |
| 22 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted includingcost of all materials, jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface inall sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre linemeasurement of the total pipe line including all specials No separate payment will be made for accessories, specials) (Recomended Oriplast Brand) |
| 23 | (a) 80 mm dia P.V.C.. pipe S-40 of ASTM-D-1785 approved Brand |
| 24 | (a) 40 mm dia P.V.C.. pipe S-40 of ASTM-D-1785 approved Brand |
| 25 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. 40mm dia. (Recomended Oriplast Brand) |
| 26 | (b) 32 mm dia PVC pipe S-80 of ASTM-D-1785 approved Brand |
| 27 | Supplying, fitting and fixing reducing socket 80mm x 40mm PVC. |
| 28 | Supplying, fitting and fixing plug of approved make conforming to I.S. specification. 40mm dia. |
| 29 | Supplying and fixing of Solvent Cement |
| 30 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). |
| 31 | (a) 25 mm dia |
| 32 | (a) 15 mm dia |
| 33 | Supplying, fitting and fixing G.I. cap at top. 100mm. |
| 34 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. |
| 35 | Supplying P.V.C. water storage tank of approved quality with closed top withlid (Black) - Multilayer.1000Litre |
| 36 | Supplying, fitting and fixing cast iron raised rain proof tank cover 450mm. |
| 37 | Providing and fixing Submersible pump with necessary fittings and accessories with electric line installations etc(as per approved vendor & Model). (Recomended CRI brand) |
| 38 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No.511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 39 | Supplying, fitting and fixing self closing C.P. water tap of approved brand and make - 15 mm dia. and make - 15 mm dia. |
| 40 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. (a) Upto 20 users:- (i) Within a lead of 150 metre |
| 41 | Complete Electrification as necessary |
| 42 | GST 18% |
| 43 | Labour Cess 1% |
