Uttar Pradesh Projects Corporation Limited has published Tender For Redevelopment Of Murli Manohar Pakka Talaw, Jalaun, Nagar Palika Jalaun (U.P). Submission Date for this Tender is 16-12-2023. Civil Work Tenders in jalaun Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Redevelopment of Murli Manohar Pakka Talaw, Jalaun, Nagar Palika Jalaun (U.P) |
| 2 | Cleaning Jungles including uprooting of rank vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. |
| 3 | Dismantling cement concrete or brick or granolithic floors including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 4 | Dismantling of girders, trusses and other steel work including stacking of dismantled materials as directed by Engineer-In- Charge within a distance of 60 meters (200 feet). |
| 5 | Dismantling of old interlocking tiles pavement including stacking of serviceable material and disposal of unserviceable material within lead of 50m as per direction of engineer in charge. |
| 6 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. |
| 7 | Cartage of silt, sludge kankar and other disposable organic material etc. all complete with labor T&P including cartage of 8 km. space for disposal to be arranged by the contractor |
| 8 | Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone) aggregate (20 mm nominal size) and cutting complete including cost of form work. In foundation and floors. |
| 9 | Providing and laying cement concrete in 1:5:10 (1 Cement :5 Fine Sand :10 Stone Ballast 40 mm guages) and curing complete, including cost of form work in foundation and floors. |
| 10 | RCC work providing and laying in position specified grade of RCC, including the cost of centering, shuttering, finishing and but excluding reinforcement, all work upto Column level. 1:1.5:3 (C:CS:SG mortar, aggregate 20mm nominal size) in column |
| 11 | RCC work providing and laying in position specified grade of RCC, including the cost of centering, shuttering, finishing and but excluding reinforcement, all work upto Column level. 1:1.5:3 (C:CS:SG mortar, aggregate 20mm nominal size) in beam |
| 12 | RCC work providing and laying in position specified grade of RCC, including the cost of centering, shuttering, finishing and but excluding reinforcement, all work upto Column level. 1:1.5:3 (C:CS:SG mortar, aggregate 20mm nominal size) in raft foundation |
| 13 | RCC work providing and laying in position specified grade of RCC, including the cost of centering, shuttering, finishing and but excluding reinforcement, all work upto Column level. 1:1.5:3 (C:CS:SG mortar, aggregate 20mm nominal in slab |
| 14 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 15 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc.required for proper completion of the work. |
| 16 | Providing and taying damp proof corse 2.5 cmthick w;th cernentconcrete 1:2:4 (1 cement:2 coarse sand:4 gradcd stone aggregate"10 mm nominalsize) and curing complete |
| 17 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 18 | 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 19 | Providing and applying Plaster of paris putty ot 2 mm Thickness over plastered surface to prepare the surface even and smooth complete. |
| 20 | Finishing walls with exterior emulsion paint (Apex) ofapproved brand and manufacture and of required shade onundacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. |
| 21 | Finishing walls with exterior paint (Apex) with silicon additives of required shade : New work (two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm) |
| 22 | Providing and fixing 1.8 mm high Gl barbed wire fencing with 2.4 M. RCC M15 grade 150mmx150 mm concrete post placed every 3 M. centre to centre founded in M15 grade cement concrete, 0.60 m below ground level every 15th post last but one end post end corner post shall be struted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with Gl staples, turn buckets etc |
| 23 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 24 | Cement concrete flooring l:2:4(.1 cement :2 coarse sand:4 graded stone aggregate of size 20 mm nominal size) laid in one layer finished with ftoating cost of neat cement(40 mm thick floor) |
| 25 | Providing and laying Kota stone stab 20 mm thia* inrisers of steps, ski(ing dado and pillars taid on .10 mm thick cement mortar 1: 3 (1 cement : 3 coarse sand), jointed with grey cement sturry mixed with pigment to match the shadc of stabs inctuding and polishing complete. |
| 26 | 40mm thick Mirzapur sand stone flooring and stairs of pucca ghat over 20mm (average) thick base of cement mortar 1:5 with joints 3mm thick, side buttered with cement mortar 1:2 admixed with pigment to match the shade of stone and pointing with samemortar. |
| 27 | Providing and laying of 60mm intertocking concrete block pavement laid in stone dust base and fill joint with fine sand. Joint fitted after labling and dressing base including supply of all materiat, Labour. T&P etc required Ior proper completion of the work. |
| 28 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 29 | Play Equipments- Double seasaw |
| 30 | Play Equipments-Single Sslide |
| 31 | Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bag |
| 32 | Foxtail palm ht. 240-270 cm bottom girth 35-40 cm well developed in bigsize HDPE bag |
| 33 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. |
| 34 | Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot. |
| 35 | Tecoma gaudichaudi of height 60-75 cm. with 5-6 branches in p.bag of size 25 cm |
| 36 | Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pot of size 20 cm |
| 37 | Providing and Stacking of Lemon grass of ht. 30cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge. |
| 38 | Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in polybag of size 20 cm |
| 39 | Plumeria rubra height 120-150 cm., 3-4 branches and thick stem in big size HDPE bag |
| 40 | Supply and fixing of Wheel Chair Swing size 14x8x10 feet as per attach photograph. |
| 41 | Supply and fixing of 3 Seater Arc Rubber Belt Swing size 13x3.50x8 feet as per attach photograph. |
| 42 | Supply and fixing of 2 Seater See Saw size 6x2.29 feet as per attach photograph. |
| 43 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor lates etc completee in all respect. |
| 44 | S/F Inaugration black granite(Polished) 20 mm thick stone size 0 90 x 0.75 cm including lttering, printing, border etc. will be painted of superior quality is rquied shae and colour including fixing exczvation of foundation (1.40 x 0.50 x 40 cm), P.C.C. 1:6:12 (1.40 x 0.50 x 0.15 cm), brick work 1:3 cement coars sand foundation (1.40 x 0.345 x 0.30 cm), upto (1.40 x 0.23 x 1.35 cm), 12 mm thick plaster 1:3 cement coarsesand finishing walls with water proffing white cement paint of approved make and quality such as super snowcem paint etc. all complete. |
| 45 | Supply of LED Bollard luminaire with Die-cast,polycorbonate diffuser, wattage not exceeding 17W,system lumen output-900lumen, .Luminaire should be capable of operating at line voltage without any separate power supply from 100-277 V AC. Luminaire is sealed to IP65 protection.Luminaire should have Compact with option of no up-lightColour temperature of 6500K with CRI-70 should be provided. |
| 46 | Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitablesize or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 2 core |
| 47 | Providing and Fixing of Fun Walker |
| 48 | Providing and Fixing of Shoulder Press |
| 49 | Providing and Fixing of Chest Press |
| 50 | Providing and Fixing of leg Press Standing Twistar |
| 51 | Providing and Fixing of Leg Lift Post |
| 52 | Providing and Fixing of Shoulder Press |
| 53 | Providing and Fixing of Pendulum Cum Twistar |
| 54 | Providing and Fixing of Fun Cycle |
| 55 | Providing and Fixing of Ski Trainer |
| 56 | Providing and Fixing of Step Trainer |
| 57 | Providing and Fixing of Chest Press |
| 58 | Providing and Fixing of Tai Chi Double |
| 59 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 60 | Retro Reflectorised Signs Board |
| 61 | Cost of R.C.C. Bench |
| 62 | Drinking water Arregment |
| 63 | GST Extra as per applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
