|
| 1 | Supply of Texmo 1Ø, 1HP Open well submersible pump set. Pipe size 25x25mm (MCB Starter included in submersible motor packing, no need to purchase extra starter) |
| 2 | PVC flat copper cable, ISI mark 2.5sq.mm x 3core for submersible pump to starter |
| 3 | Fabrication GI Heavy duty single arm with fitting assembly with S.S Nut Bolt to secondary pipe as per standardization of Lighthouses: -* The main G.I pipe having 4”Ø with 5mm thickness and 6” long with necessary 8x25mm Nut-bolt fitting at the bottom side.* The arm should made of 2”Ø G.I Pipe with suitable bend (45°) to 4” G.I main pipe and projection of about 2’ long, at the end point reducer of 1½” G.I for light fitting. |
| 4 | 25W/230V, ACLED Street light, Reputed Brand |
| 5 | 15W street light fitting in place of 15W Bulk head light assembly, Reputed Brand |
| 6 | PVC Street Light pipe Bracket for fixation of 15W street light on front side (L & R) of wall of IQ |
| 7 | Main Gate Light for Harudi VTS station: LED post top Lantern without pole with fixing arrangement including LED light source |
| 8 | 15W LED Round surface ceiling Light, Reputed Brand |
| 9 | 3Core 1.5Sq.mm Armoured cable between two street light pole Reputed brand |
| 10 | Electrical pole Junction Box 250X200X100mm |
| 11 | 6A/ 1Pole with 1PP 240V MCB…Reputed brand |
| 12 | 25X3 mm copper strip for fabrication of copper clamps (In 1Mtr = 2 clamps) |
| 13 | 1.5sq.mmX2C PVC insulated & sheathed coper flexible cable, reputed brand |
| 14 | 30A/6 way Close type connector, reputed brand |
| 15 | 1.5Sq.mmX1C copper flexible cable for extension of cable from footage to PVC Junction box for gate light wiring and street light work – 25Meter Red + 25Meter Black = 50Meter |
| 16 | 20/25mm PVC Pipe from footage to junction box (Each pipe length is 3 meter) |
| 17 | Steel grip tape-6Nos, Water Proof tape – 6Nos |
| 18 | Plumber charges(from Naliya to Harudi) for installation of 1Ø, 1HP open well submersible pump, solution for PVC pipe fitting, 25mm PVC Reputed brand pipe for submersible pump connection– 3Mtr, 6mm Cable jointer copper, 20mm PVC Bend-10Nos, 20mm PVC Socket-4Nos. 6mm & 8mm sleeve, silicon sealant (clear) & cocking gun-1Each, 200mmCable Tie, 25x8mm SS Nut-Bolt for fixation of clamp, assorted size of nut bolt for fixation of 6-way connector, Red Oxide Primer-2lit, Synthetic Enamel Red colour for painting on footage-2lit, 2 coat Aluminum paint for pole-2lit, brush, thinner-2lit, MCB channel strip and its fitting nut-bolt etc. |
| 19 | Labor charges for channel cutting on existing footing structure and excavation/refilling of channel for laying UG cable and transportation of materials to & fro. |
| 20 | Mason for repairing footing structure including Cement, Sand, aggregate along with transportation up to Lighthouse |
| 21 | Replacement of Kent Pride Mineral RO, 8Lit Capacity inline filter and membrane |
| 22 | Aluminum self-supporting ladder 8 foot |
| 23 | Pair of Aviation Light (2Nos Light), Warranty 12 Month with pipe and clamps |
| 24 | 16Ch 4K Network Video Recorder |
