Military Engineer Services-MES has published Tender For Provn Of Toilet With Bathroom For Ln Air Warrior At Afs Mandore Provn Of Retainig Wall Interlocking Tiling And Certain Br Works At Af Stn Mandore Provn Of Collapsible Agte Cooler Stand Iron Ladders And Iron Grill At Certain Building At Af. Submission Date for this Tender is 28-12-2023. Paver Blocking Tenders in Jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-12-2023 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out as soft/disintegrated rock all as specified and directed. |
| 2 | Removing excavated material exc. 1.5km but n exc. 5 m and depositing where directed complete all as specified. |
| 3 | M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 4 | M&L Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed. |
| 5 | Formwork to flat Rough finished surfaces of concrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to better complete all as specified and directed. |
| 6 | Formwork square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed |
| 7 | Formwork to flat Rough finished surfaces of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed |
| 8 | Formwork to flat Rough finished surfaces of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed |
| 9 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide |
| 10 | S&F for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,Beams,footing, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 11 | S&F for TMT steel bars 6-8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab,hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 12 | S&F for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 13 | M & L RCC nomonal mix 1:1.5:3, Type B1(20 mm graded aggregate)for foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 14 | M&L RCC nomonal mix 1:1.5:3, B1(20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified. |
| 15 | M&L RCC nomonal mix 1:1.5:3, B1(20 mm graded aggregate) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like |
| 16 | M&L RCC nomonal mix 1:1.5:3, B1(20 mm graded aggregate) for Beams,roof beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 17 | M&L for 75 mm thick cement concrete type D2, 1:4:8 (40mm stone aggregate) as in sub base complete all as specified and directed |
| 18 | M&L for 25 mm thick cement concrete type B0, 1:2:4 (12.5mm stone aggregate) as in base complete all as specified and directed |
| 19 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6complete all as specified and directed |
| 20 | M&L for cement plaster 1:6 Rendering 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed |
| 21 | M&L for cement plaster 1:3 Rendering 5mm thick on ceiling complete all as specified and directed |
| 22 | M&L for cement plaster 1:4 rendering 15 mm thick on external surfacefinished even and smooth (without using extra cement) complete all as specified and directed |
| 23 | M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified. |
| 24 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer or mortar 15mm CM 1:4 complete all as specified and directed |
| 25 | M&L for glazed ceramic tiles,coloured,350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces all as specified and directed. |
| 26 | S&F powder coated metalic louvers slits to hold glass strip of size 300x500 mm with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as diredcted. |
| 27 | S&F aluminium anodised frame for doors, windows,ventilater ,partitions complete all as specifed and directed |
| 28 | S&F figured glass of 3.0 mm, ordinary quality and glazing with or without oil putty in square n exc 0.5 sq. m in each pane fixed with beads and metalclips/pins complete. |
| 29 | M & L for preparing of new surfaces, plastered or unplastered and applying three coat of white wash on ceiling complete all as specified and directed. |
| 30 | M & L for preparing of new surfaces, plastered or unplastered and applying two coat of oil emulsion distemper on walls over one coat of alkali resist primer over a thin layer of putty complete all as specified and directed |
| 31 | M & L for preparing of new surfaces, plastered or unplastered two coat of cement base paint over one coat of primer on external walls complete all as specified and directed |
| 32 | Taking upor down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm. |
| 33 | Taking upor down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm. |
| 34 | Supply and laying 20 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 35 | Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 36 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20mm brass gate valve and 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) |
| 37 | S&F 15 mm bore bib taps fancy type cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F 15 mm bore fancy type stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions. |
| 40 | S&Fbrass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union. |
| 41 | S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union. |
| 42 | S&F in repairs brass chromium plated health faucet of 15 mmbore complete. |
| 43 | S&F vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm dia pvc waste pipe fixed complete all as specified. |
| 44 | S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe, 32 mm dia and fixed complete all as specified. |
| 45 | S& F vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm incl PVC P-trap,and fixing arrangementand PCC for fixing complete all as specified and as directed. |
| 46 | S&F valveless, syphonicaction type,low level flushing cistern 10 ltrcapacity white, with inlet, ball valve, float including brackets and flush pipe 32mm dia connections to pies pvc connection 450mm longan fixing complete all as specified and directed. |
| 47 | M&L for 75 mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 48 | M&L for PVC (SWR) floor trap of oulet dia 75 mm, plain with grating including jointing with solvent cement complete all as specified. |
| 49 | S&FPVC connection 15 mm size with PTMT nuts of length 450 mm complete. |
| 50 | S&F stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 51 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 52 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm longcomplete all as specified and directed |
| 53 | S&F 5.5 mm thick, 600 X 450mm bevelled edgemirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with aluminium channel frame alround and 2 Nos. hanging clips & fixed to wooden plugs with CP brass screws and cup washers. |
| 54 | S&F in grating doom 100 mm dia of PTMT (minimum weight 25 gms) |
| 55 | S&F solid PVC door frame of size 50mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing. |
| 56 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing. |
| 57 | S&F for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21complete all as specified and directed |
| 58 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixedcomplete all as specified and directed |
| 59 | S&F aluminium handles, cast type, anodized, of size 100 mmcomplete all as specified and directed |
| 60 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directed. |
| 61 | S&F Galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 62 | M&L for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete. |
| 63 | M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 64 | M&L for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete. |
| 65 | M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 66 | S&FPVC (SWR) door bends 110 mm dia |
| 67 | S&F PVC (SWR)Vent Cowl 110 mm dia |
| 68 | S&FPVC (SWR) door bends 75 mm dia |
| 69 | S&F PVC (SWR), junction single, (Single T) with acess door 75 mm dia equal or unequal |
| 70 | S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal |
| 71 | S & F in repairs 100 mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified & directed. |
| 72 | M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE :Water proofing compound shall be measured and paid for separately as “Supply only” |
| 73 | M&L for preparation of new plastered surfaces and applying two coats of Polyurethene(PU) acrylic based water proofing liquid compound over one coat of diluted self priming with reinforcing fabric sheet as per manufacturer instruction to stop leakage/seepage from roof/wall complete all as specified and directed for work in building/structure of any height. |
| 74 | Supply only integral water proofing compound |
| 75 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested. |
| 76 | M & L for salt glazed stone ware drain pipes of 150 mm internal dia. Meter grade “A” laid in trenches and jointed. |
| 77 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 78 | M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately). |
| 79 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified. |
| 80 | M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10 cm thick, 25 cm to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete as in manhole cover and complete all as specified. |
| 81 | Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ roundor3/4Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required. |
| 82 | M & L 75 mm thick PCC 1:3:6 Type C-2( 40 mm graded agreagate) as plinth protection complete all as specified and directed. |
| 83 | M & LBrickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles . |
| 84 | M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed. |
| 85 | M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified. |
| 86 | M& L for 15 mm thick rendering onbrick masonary in CM 1:4 on walls finished even and smooth without using extra cement andall as specified. |
| 87 | M & L for preparing old surfaces plastered or unplastered surface of wall by complete removal of existing treatment by steel wire brushing /metal sheet including washing rubbing down and stopping of distempered and painted surface and applying two coat of exterior emulsion paint in different tint/shade (Comouflage pattern) as directed and approved by userover one coat of alkali resistant primer as per manufacture"s instructions all as specified and directed. |
| 88 | M & L for 20 mm granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 89 | M&L for demolitation of cement concrete of any description and in any position not otherwise specifically providedfor and complete all as specified. |
| 90 | M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in sub base, filling and mass concrete all as specified and directed. |
| 91 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 92 | M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber mould/ruberised type with gray cement and pigment. |
| 93 | M&L chequered cement concrete tiles rouber moulded 30cm x 30cm x 25 mm thick,set, jointed and pointed in neat cement slurry in floors complete all as specified. |
| 94 | S & F stainless steel letters of size 12"" at any height complete all as specified and directed. |
| 95 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete. |
| 96 | M & L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 97 | S& F collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 98 | Cutting holes in stone walls for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 depth of embedded portion of hold fast exc half brick andn exc one bricks. |
| 99 | S & F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets hanging also fastening and fixing for ladder etc complete Fe-410=W(Grade-E-250) quality A, all as specified and directed. |
| 100 | S & F cutting hole into or through in stone wall exc 150 Sqcm but not exe 400 sqcm built in cement mortar or cement lime mortar and walls of cement concrete and repair wallcomplete all as specified. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 102 | S&F Framed work such as cooler stand, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,framed balusters, walk ways, railings,gate framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 103 | S&F 1.0 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. |
| 104 | Excavation in post holes or similar holes each n.exc 0.50 cum, getting out and returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making good to surface in in soft/disintegrated rock. |
| 105 | M&LPCC 1:3:6 type C-2 (with using 40 mm graded stone aggregate)asin foundation filling andmass concrete, complete all as specified and directed. |
| 106 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge |
| 107 | Supply only GI chain link fencing including line wires any mesh andany size and type to any type of standards rails etccomplete all as specified and directed. |
| 108 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 109 | S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 5-10mm. |
| 110 | M&L preperation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coat synthetic enamel paint complete. |
| 111 | M&L preparation of new steel surfaces & applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 112 | M & L for excavating over areas, n exc 1.5 m deep and getting outof soft/ disintegrated rock complete all as specified and as directed. |
| 113 | M & L 100 mm thick PCC 1:4:8 type D2 ( Using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 114 | M & L for dismantling structural steel work including doors, gates but excluding framed truss etc and making surface as good using CM 1:4 complete all as specified and as directed. |
| 115 | M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones. |
| 116 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and including all necessary fitting and fixes complete all as specified. |
| 117 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 118 | S&F anodised aluminium window and ventilator shutters sliding type, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 119 | S&F aluminium (extructed section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed. |
| 120 | S&F Sheet glass thickness 5.5 mm,ordinary quality and glazing with aluminium strip in squareexc 0.5 sqm in each pane fixed with transparent rubber beading including all necessary fitting and fixture complete. |
| 121 | S&F single colour aluminium composit panel thickness 5 mm fixing with aluminium frame partition complete all as specified and as directed. |
| 122 | S&F extruded aluminium alloy handles, 150 mm fabricated type,anodised all as specified and as directed. |
| 123 | S&F brassmortice lock, vertical type, size 100 mm , 4 levers with 2 keys etc., complete all as specified and directed. |
| 124 | M&L for 15 mm thick rendering on brick masonary on internal wall at any heightin CM 1:6 on wallsusing , finished even and smooth without using extra cement andall as specified. |
| 125 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a layerwall care putty, all as directed. |
| 126 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a layerwall care putty, complete all as specified & directed. |
| 127 | M&LPoint wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and including PVC casing capping / PVC Conduit/PVC Conduit concealed (as per site requirement) with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :- (Note- M&L for channel/grooves cutting upto a depth of 2.5 cm and width not exc 15 cm into brick/concrete/stone masonry walls, with or without re-enforcement and trimming surface as required including concealing PVC conduit 20/25 mm dia with required accessories (like junction boxes/bends etc.,) and plastering 1:4 CM, applying two coats of approved qualitywhite putty for making good and smooth finish to match with existing specifications of wall surface all as specified and as directed by Engr in charge.). All are included in unit rate quoted nothing extra shall be admissible. |
| 128 | One light point controlled by one one way switch |
| 129 | One fan point/Ex fan point controlled by one one way switch |
| 130 | One socket out let 5 Amps on the same board |
| 131 | One socket out 3 pin 5 Amps on the independent board. |
| 132 | All as per item No 127.00 above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board. |
| 133 | S&F switch flush type 5 Amp, 240 V, single pole one way ISI Marked. |
| 134 | S & F Socket outlet 3 pin, 6A, flush type complete. |
| 135 | S&F switch socket combination 2 in 1,5 Amps flush type |
| 136 | S&F switch socket combination outlet 6 pin ,6/16 Amps flush type |
| 137 | S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body. |
| 138 | S&Fsheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link |
| 139 | Supply & Fix sheet metal enclosure with a two pin and earth plug socket completeincluding with 25 Amps MCB Single pole 240 Volt AC. |
| 140 | M&L for MCB single pole 6-32 Amps, 240 V. |
| 141 | M&L for MCB single pole & neutral 32 to 63 Amps, 240 V. |
| 142 | Supply and fixing LED Tube lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 143 | Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 144 | S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed. |
| 145 | M& L for dismantling and taking out PCC pole complete including dismantling of PCC copping andmatch the existing surface with filling and well ramming etc., complete all as specified and directed. |
| 146 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 147 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. |
| 148 | M & L Cutting in position and providing Tee 25x15mm screwing the existing GI tubing for addn/altns of size 25 mm dia complete all as specified and as directed. |
| 149 | S & F GI Tubes 15 mm dia, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 150 | Supply & fix Bib taps brass chromium plated with crutch or butterfly handle, 15 mm size complete all as specified and as directed. |
| 151 | Supply & Fix stop valve screwed supplied and installed complete for size 15 mm dia. complete all as specified and as directed. |
| 152 | Supply & Fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 153 | S&F in replacement tubes Medium grade galvanised with all fittings as Tees, bends, etc laid in trenches of size 25 mm bore complete all as specified and as directed. |
| 154 | S&F gate valves gun metal with iron wheel high pressure screwed both ends for iron pipe or for union and fixed or following size 25 mm dia complete all as specified and as directed. |
| 155 | NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
