Tender For External Finishing ,And Other Civil Repair Works Of 10Kc Dot Bldg,Admin Bldgi/C Compound Wall At Civillines Ayodhya Cantt.Distt.Ayodhya.., ayodhya-Uttar Pradesh

Tender For External Finishing , And Other Civil Repair Works Of 10Kc Dot Bldg, Admin Bldgi / C Compound Wall At Civillines Ayodhya Cantt.Distt.Ayodhya..; 1 Deduct For Not Providing Hinges In Doors, Windows Or Clerestory Window Shutters With : 2 Stainless Steel Butt Hinges With Stainless Steel Screws : 3 For 2Nd Class Teak Wood And Other Class Of Wood Shutters. 4 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 5 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 6 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 7 300X16 Mm 8 250X16 Mm 9 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, ( Barrel Type ) With Necessary Screws Etc. Complete : 10 250X10 Mm 11 200X10 Mm 12 150X10 Mm 13 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 14 100 Mm 15 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.. 16 In Cement Mortar 17 Removing Mortar From Bricks And Cleaning Bricks Including Stacking Within A Lead Of 50 M ( Stacks Of Cleaned Bricks Shall Be Measured ) : 18 From Brick Work In Cement Mortar 19 Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Metres Lead: 20 Of Area 3 Sq. Metres And Below 21 Dismantling G.I. Pipes ( External Work ) Including Excavation And Refilling Trenches After Taking Out The Pipes, Manually / By Mechanical Means Including Stacking Of Pipes Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : 22 15 Mm To 40 Mm Nominal Bore 23 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 24 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 25 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor, Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing : 26 1:1½:3 ( 1 Cement : 1½ Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 27 Providing And Fixing Up To Floor Five Level Precast Cement Concrete String Or Lacing Courses, Copings, Bed Plates, Anchor Blocks, Plain Window Sills, Shelves, Louvers, Steps, Stair Cases, Etc. Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) , Cost Of Required Centering Complete. 28 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources ) . 29 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : 30 Suspended Floors, Roofs, Landings, Balconies And Access Platform 31 Smooth Finishing Of The Exposed Surface Of R.C.C. Work With 6 Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) . 32 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 33 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 34 12 Mm Cement Plaster Of Mix : 35 1:4 ( 1 Cement: 4 Fine Sand ) 36 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 37 1:6 ( 1 Cement: 6 Fine Sand ) 38 20 Mm Cement Plaster Of Mix : 39 1:6 ( 1 Cement: 6 Coarse Sand ) 40 Neat Cement Punning 41 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 42 Two Or More Coats On New Work. 43 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 44 Painting ( One Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Synthetic Enamel Paint Of Approved Brand And Manufacture And Required Colour On Old Work : 45 75 Mm Diameter Pipes . 46 100 Mm Diameter Pipes . 47 150 Mm Diameter Pipes . 48 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 49 One Or More Coats On Old Work. 50 French Spirit Polishing : 51 One Or More Coats On Old Work. 52 Finishing Walls With Water Proofing Cement Paint Of Required Shade : 53 Old Work ( One Or More Coats @ 2.20 Kg / 10 Sqm ) Complete. 54 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 55 Old Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm ) On Existing Cement Paint Surface ) . 56 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground , All Complete As Per Directions Of Engineer-In-Charge. 57 With Cement Mortar 1:4 ( 1Cement: 4 Coarse Sand ) . 58 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: 59 Float Glass Panes Of Nominal Thickness 4 Mm ( Weight Not Less Than 10Kg / Sqm ) . 60 Raking Out Joints In Lime Or Cement Mortar And Preparing The Surface For Re-Pointing Or Replastering Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Directions Of Engineer-In-Charge. 61 Flush Pointing With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement For Flat Tile Bricks On Top Of Mud Phaska : 62 With F.P.S. Brick Tiles 63 Cleaning Of Terrace / Loft Water Storage Tank ( Inside Surface Area ) Upto 2000 Litre Capacity At All Heights With Coconut Brushes, Duster Etc., Removal Of Silt, Rubbish From The Tank And Cleaning The Tank With Fresh Water Disinfecting With Bleaching Powder @ 0.5Gm Per Litre Capacity Of Tank, Including Marking The Date Of Cleaning On The Side Of Tank Body With The Help Of Stencil And Paint And Disposing Of Malba, All Complete As Per Direction Of Engineer-In-Charge. ( The Old Date Already Written On Tank Should Be Removed With Paint Remover Or Black Paint And If Date Is Not Written With The Stencil Or Old Date Is Not Removed Deduction Will Be Made @ Rs. 0.10 Per Litre If During Cleaning Any Gi Fittings Or Ball Cock Is Damaged That Is To Be Repaired By Contractor At His Own Cost And Nothing Extra Will Be Paid On This Account ) 64 Disconnecting Damaged Overhead / Terrace Pvc Water Storage Tank Of Any Size From Water Supply Line And Removing From The Terrace Including Shifting At Ground Level As Per Direction Of Engineer-In- Charge. 65 Providing And Fixing M.S. Holder Bat Clamp Of Approved Design To Sand Cast Iron / Cast Iron ( Spun ) Pipes Comprising Of M.S. Flat Brackets Made Of 50X5 Mm Flat Of Specified Shape, Projecting 75 Mm Outside The Wall Surface And Fixed On Wall With 4Nos, 6Mm Dia Expansion Hold Fasteners, Including Drilling Necessary Holes In Brick Wall / Cc / Rcc Surface And The Cost Of Bolts Etc. The Pipes Shall Be Fixed To The Already Fixed Brackets With The Help Of 30 Mm X1.6 Mm Galvanised M.S. Flats Of Specified Shape And Of Total Length 420 Mm And Shall Be Fixed With M.S. Nuts, Bolts, & Washers Of Size 25X6 Mm, One Bolts On Each Side Of The Pipe. 66 Total Bracket Length 580 Mm Of Approved Shape And Design ( For Single 100 Mm Dia Pipe ) . 67 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge : External Work 68 15 Mm Nominal Outer Dia. Pipes. 69 20 Mm Nominal Outer Dia. Pipes. 70 Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I / C Cutting And Making Good The Walls Etc. : Internal Work – Exposed On Wall. 71 15 Mm Dia. Nominal Bore 72 20 Mm Dia. Nominal Bore 73 25 Mm Dia. Nominal Bore 74 40 Mm Dia. Nominal Bore 75 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 76 25 Mm Nominal Bore 77 20 Mm Nominal Bore 78 Providing And Fixing Ball Valve ( Brass ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 79 20 Mm Nominal Bore 80 Providing And Fixing G.I. Union In Existing G.I. Pipe Line, Cutting And Threading The Pipe And Making Long Screws Including Excavation, Refilling The Earth Or Cutting Of Wall And Making Good The Same Complete Wherever Required : 81 15 Mm Nominal Bore. 82 20 Mm Nominal Bore. 83 25 Mm Nominal Bore. 84 40 Mm Nominal Bore. 85 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank.

INR 590 /-

INR 17679.0 /-

INR 8.83 Lakhs /-

Name of Work:External finishing ,and other civil repair works of 10KC DOT Bldg,Admin Bldgi/c Compound wall at Civillines Ayodhya cantt.Distt.Ayodhya..

Sl. No.	Item Description
1	Deduct for not providing hinges in doors, windows or clerestory window shutters with :
2	Stainless steel butt hinges with stainless steel screws :
3	For 2nd class teak wood and other class of wood shutters.
4	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
5	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
6	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
7	300x16 mm
8	250x16 mm
9	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
10	250x10 mm
11	200x10 mm
12	150x10 mm
13	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
14	100 mm
15	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..
16	In cement mortar
17	Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):
18	From brick work in cement mortar
19	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:
20	Of area 3 sq. metres and below
21	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
22	15 mm to 40 mm nominal bore
23	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
24	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
25	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
26	1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
27	Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3coarse sand), cost of required centering complete.
28	1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
29	Centering and shuttering including strutting, propping etc. and removal of form for :
30	Suspended floors, roofs, landings, balconies and access platform
31	Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
32	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
33	Cement mortar 1:6 (1 cement : 6 coarse sand)
34	12 mm cement plaster of mix :
35	1:4 (1 cement: 4 fine sand)
36	15 mm cement plaster on the rough side of single or half brick wall of mix :
37	1:6 (1 cement: 6 fine sand)
38	20 mm cement plaster of mix :
39	1:6 (1 cement: 6 coarse sand)
40	Neat cement punning
41	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
42	Two or more coats on new work.
43	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
44	Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :
45	75 mm diameter pipes .
46	100 mm diameter pipes .
47	150 mm diameter pipes .
48	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
49	One or more coats on old work.
50	French spirit polishing :
51	One or more coats on old work.
52	Finishing walls with water proofing cement paint of required shade :
53	Old work (one or more coats @ 2.20 kg/10 sqm) complete.
54	Finishing walls with Acrylic Smooth exterior paint of required shade :
55	Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
56	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
57	With cement mortar 1:4 (1cement: 4 coarse sand).
58	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
59	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
60	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
61	Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
62	With F.P.S. brick tiles
63	Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
64	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
65	Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
66	Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe).
67	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
68	15 mm nominal outer dia. Pipes.
69	20 mm nominal outer dia. Pipes.
70	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
71	15 mm dia. nominal bore
72	20 mm dia. nominal bore
73	25 mm dia. nominal bore
74	40 mm dia. nominal bore
75	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
76	25 mm nominal bore
77	20 mm nominal bore
78	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
79	20 mm nominal bore
80	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
81	15 mm nominal bore.
82	20 mm nominal bore.
83	25 mm nominal bore.
84	40 mm nominal bore.
85	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.