Department Of Posts-DOP has published Tender For Renovation Of Internal Electrical Installation, Provision Of Ac Points In Rooms, Corridor, Bathrooms, Stores And Mess In Sampark Bhawan At Ptc Campus Saharanpur.(Sh: Providing Heating Arrangement And Other Miscellaneous Electrical Works). Submission Date for this Tender is 08-12-2023. Storage Chests and Cabinets and Trunks Tenders in saharanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
2 | a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
3 | b)4 X 1.5 sq. mm +2 X 1.5 sq. mm earth wire |
4 | c) 6 X 1.5 sq. mm +3 X 1.5 sq. mm earth wire |
5 | d) 2 X 4 sq. Mm +1 X 4 sq. mm earth wire |
6 | e) 4 X 4 sq. Mm +2 X 4 sq. mm earth wire |
7 | f) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
9 | a)3 x 1.5 sqmm |
10 | b) 6 x 1.5 sqmm |
11 | c) 9 x 1.5 sqmm |
12 | d) 3 x 4 sqmm |
13 | e) 6 x 4 sqmm |
14 | f)3 x 6 sqmm |
15 | g) 1 x 6 sqmm |
16 | h) 1 x 35 sqmm |
17 | Supplying and fixing of following sizes of steel/ medium class PVC conduit along with accessories in surface/recess including painting in case of surface steel conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
18 | a) 20 mm PVC |
19 | b) 25 mm PVC |
20 | c) 32 mm PVC |
21 | Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
22 | a) 5/6 A switch |
23 | b) 15/16 A switch |
24 | c) 3 pin 5/6 A socket outlet |
25 | d) 6 pin 15/16 A socket outlet |
26 | e) Two module stepped type electronic fan regulator |
27 | f) Modular blanking plate |
28 | g) 25 Amp 3ka modular mini SP MCB |
29 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
30 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
31 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
32 | a) 1 or 2 Module (75mmX75mm) |
33 | b) 3 Module (100mmX75mm) |
34 | c) 4 Module (125mmX75mm) |
35 | d) 6 Module (200mmX75mm) |
36 | e) 8 Module (125mmX125mm) |
37 | f)12 Module (200mmX150mm) |
38 | g)18 Module (200mmX150mm) |
39 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
40 | a) 100 mm x 100 mm x 60 mm |
41 | b) 180 mm x 100 mm x 60 mm |
42 | c) 200 mm X 250 mm X 60 mm |
43 | d) 250 mm X 300 mm X 60 mm |
44 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connection etc. as required. |
45 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
46 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
47 | Supply &Fixing of following Surface/ recess/ batten, LED fittings/ Tubes/ lamps/ Street lights, respectively direct on ceiling/ Suitable frame/ wall/ or on existing fittings/ ABH/ Bracket, i/c testing, commissioning complete etc as required. |
48 | a) 1X 20 W box type LED fittings( M/S /Philips TMC 501/Havells regal batten) |
49 | b) 2X 20 W box type LED fittings( M/S Havells/ Philips/ or SSMake) |
50 | c) 20 W LED glass Tube light ( M/S Havells/Philips Make ) |
51 | d) 0.5 W LED Lamp of B22 or E27 base (Havells/Philips or SS make) |
52 | e) 18 Watt, Surface mounting LED Panel Fitting.(M/S Havells CLIPON SURFACE Square or SS make) |
53 | f) 60 watt LED street lights (IP 66) new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LED"s as light source.(M/s Havells Sundown/ Philips/SSmake) |
54 | g) 70 watt LED Flood lights.(M/s Havells Jita Sturdy neo/ Philips/SSmake) |
55 | S/F of street light bracketof 32 mmdia. G.I pipe (medium class) of 1.00 Mt. length having required bendin middle with two nos MS Clamp for holding the bracketon the wall etc. as reqd. |
56 | SITC of Following size and following type energy saving fans suitable to operate on 240 Volts, 50 Hz single phase A C supply i/c making connection testing commissioning etc. as reqd |
57 | a) 1200 mm sweep ceiling fan.(M/s Havell"s ES-50/40 / Orient IS50 / or Crompton HS Basic/ Orient new breez/ Havells samrat) |
58 | b) 300 mm sweep Heavy duty Exhaust fan in the existing opening.(M/s Orient power flow/Bajaj freshee/Havells Ventilair DB or SS make ) |
59 | c) 450 mm sweep, 900 RPMHeavy duty Exhaust fan in the existing opening.(M/s Orient /Bajaj /Havells make ) |
60 | Rewinding of following items with suitable size of super enameled copper wire, latherised paper, varnishing, by dismantling old winding complete testing etc as required.(Note: old Cu wire will be the property of contractor). |
61 | a) 1200/1400 mm ceiling fan |
62 | Replacement the following defective items/partsin the existing ceiling/exhaust fan/ Wall fan etc completeas required. |
63 | a) 2.5/3.15 MFD condenser (M/s. Havells/Asian make) |
64 | b) Ball bearing of suitable size for ceiling fan (M/s SKF/NBC/HCH make) |
65 | Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. |
66 | SITC of 50 ltr capacity storage water geyser i/c P/F of steel armoured cold and hot water connection pipe of standard length and size suitable to operate on 230 volt 50 Hz single phase supply complete as required (M/S Havells Monza DX or SS make ) |
67 | SITC of 25 ltr capacity(Vertical or Horizontal type) storage water geyser i/c P/F of steel armored cold and hot water connection pipe of standard length and size suitable to operate on 230 volt 50 Hz single phase supply complete as required (M/S Havells Monza DIGI/ Monza slim or SS make ) |
68 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
69 | a) 4 way, Double door |
70 | b) 12 way, Double door |
71 | c) 16 way, Double door |
72 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) |
73 | a) 4 way (4 + 12), Double door |
74 | Supplying and fixingfollowing rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Havells/ legrand/LT/Siemens/ Schneider/ABB) |
75 | a) 5-32 Amp, Single pole |
76 | b) 63 Amp TP MCB |
77 | c) 63 Amp FP MCB |
78 | Supplying and fixing following rating, double pole/ Four pole , 240/415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
79 | a) 63 A DP Isolator |
80 | b) 63 A FP Isolator |
81 | Supplying the following Size PVC/ XLPE insulated PVC seathed Aluminum armor cable of 1.1 kV as per IS 1554 etc as reqd.(Polycab/KEI/Havells/Finolex) |
82 | a) 2 core 6 sqmm |
83 | b) 2 core 16 sqmm |
84 | c) 4 core 16 sqmm |
85 | Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
86 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required |
87 | a) Upto 35 sq. mm (clamped with 1mm thick saddle) |
88 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. |
89 | a) Upto 35 sq. Mm |
90 | Cutting the pakkafloor or CC roadfor laying of Cable/ GI pipe and making goodthe damage with cement, concrete and sand completeetc as reqd. |
91 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
92 | a) Upto 35 sq. mm |
93 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
94 | a) Upto 35 sq. mm |
95 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/PVC pipe as required. |
96 | a) Upto 35 sq. mm |
97 | Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. |
98 | a) 2 X 6 sq. mm (19mm) |
99 | b) 2 X 16 sq. mm (22mm) |
100 | c) 4 X 16 sq. mm (28mm) |
101 | Add multiplying factor as per CPWD letter no. 158/SE(TAS)/ GST/2022/331 dated10.08.2022 @6.33% on DSRRates Rs 592664 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail