Tender For Various Type Of Maintenance Work In Hbtu Kanpur, Kanpur-Uttar Pradesh

TDR : 40889446

Tender Notice
BOQ

Expired

Kanpur , Uttar Pradesh

Tender Brief : Tender For Various Type Of Maintenance Work In Hbtu Kanpur

Document Fees
₹ 11800 /-

EMD
₹ 4645740.0 /-

Tender Value
₹ 23.22 Crore /-

Submission Date
16-12-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	1. Renovation of Residence of East & West CampusType IV-53, III-14, II-12, I-10
2	A.Estimate of Proposed Renovation of Type-I Residence
3	Dismantling exiting plaster including disposal of refuse as directed by Engineer-Incharge with in a distance of 60 meters (200ft.)
4	Dismantling cement concrete or brick or granolithic floors including base cocrete and including stacking of dismantled maerials as directed by the Engineer-Incharge with in adistance of 60 meters (200ft.)
5	Dismantling of Reinforced cement concrete or Rainforced including stacking of dismantled materials a direced by the Engineer-Incharge with in as distnace of 60 meters (200ft)
6	Dismantling door or window including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
7	Dismantling of Brick work including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
8	Disposal of Malba (1 to 5 Km)
9	Providn and laying in cement concrete 1:2:4 (1Cement:2 Coarse Sand:4graded stone aggregate 20mm normal Size) and curing complete, including cost of form work in foundation and floors.
10	R.C.C. work with cement approved coarse sand and 20mm guage approved stone ballast in the proportion of 1:1.5:3 (1 Cement:1.5 coarse sand:3 stone aggregates) in slab excluding supply of reinforcemnt and its fixing and binding the same with 24 B.W.G.G.I. bindin wire and including necessary cenering and shutterin etc and also including supply of all materils, labour and tools and plants etc required for proper completion of the works. Binding wire cost being inluded in the tiem. (M-20)
11	TMT FE-500 or iron in plain work such as reinforced concrete orreinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
12	12mm cement plaster in single coat on fiar side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1) 1 cement:6coarse sand F.M. 2.25
13	12mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth and finshed even and smooth (1) 1cement:6coarse sand. F.M. 2.25
14	12mm thick plaster in 1:3 on ceiling and soffits of stainrs upto floor two level.
15	M-150 brick work in 1-6cement and coarse sand of 2.25 F.M. mortar in above plinth inclding supply of all materials labour tools and plants etc. required for proper completion of the work (1.6cement & Coarse sand)
16	40mm thick 1:2:4 plain cement concrete floor (1cement:2 coarse Sand:4graded stone aggregate 12-20mmnormal size laid in one layer neat cement.
17	20mm thick cement plaster in dado/skirign in 1:3 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio 5:1 including supply of all materials labour T & P etc. required for proper completion of the work
18	Providing and fixing glass strips of 3.15 mm (1/8\") thickness in joints of floor skirting dado at time of laying floors flush with floor level including supply of all material labour and T&P etc. required for proper completion of work 3.5cm depth
19	Finishing walls with premium Acrylic (Apex) smooth exterior paint with silicone additives of required shade New work (Two or more coats applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm)
20	Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give and even shade ever & Including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar Asian Paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inside walls+ Ceiling Area)
21	Providing and applying white cement based putty of average thickness 1mm approved brand and manufacture over the plastic wall surface to prepare the surface even and most complete
22	Supply & fixing of flush door commercial quality conforming to I.S. 2202 Part-I (1983) Including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, handles & spriings fitting with necessary screws complete. Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part-I), (Both Side Laminated) 35mm thick
23	Single Leaf
24	Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors chaukhats nosing.
25	Fabrication of angle iron door chaukhat of 40405mm.
26	Providing & fixing of door/windows grill.
27	Z-Section Steel widows
28	Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girthor samll articles not exceeding 0.10 sqm in area white superiorsynthetic enamel such as LUXOL3, Hi gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
29	Same as item but on new wood surface
30	Fixing of panes of glass with Atul or equivalent ISI marked quality putty brands & Springs complete including cost of materils labour etc (b) 4.0mm thick
31	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and cleresory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
32	Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required
33	Add for plaster drip Course/Groove in plastered surface or moulding to R.C.C. projections.
34	25mm thick 1:2:4 plain cementconcrete floor (1 cement:2coarse sand:4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement
35	Providing & Fixing stainless steel sliding door bolts ISI Marked anodised (dnodic coating not less tan grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x16mm
36	Providing and fixing stainles steel towerbolts (barrel type) with necessary screws etc. complete
37	300mm x 10mm
38	250mm x 10mm
39	Providing and fixing stainless steel handles with screws etc. complete (a) 125mm
40	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fitttings complete including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces.
41	Water proofing: Clean the previous surface property with wire brush b. Providing and doing a coat of approved cold bitumin priner (make. IWL Pidilite or eqv) @ 03 Lir. per Sqm over the entire dried area c. Providing and fixing App Polyester Membrane 2mm thick
42	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
43	Contingencies @ 2%
44	B.Estimate of Proposed Renovation of Type-II Residence -4 Nos. (Qty.-12)
45	Dismantling exiting plaster including disposal of refuse as directed by Engineer-Incharge with in a distance of 60 meters (200ft.)
46	Dismantling cement concrete or brick or granolithic floors including base cocrete and including stacking of dismantled maerials as directed by the Engineer-Incharge with in adistance of 60 meters (200ft.)
47	Dismantling of Reinforced cement concrete or Rainforced including stacking of dismantled materials a direced by the Engineer-Incharge with in as distnace of 60 meters (200ft)
48	Dismantling door or window including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
49	Dismantling of Brick work including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
50	Disposal of Malba (1 to 5 Km)
51	Providn and laying in cement concrete 1:2:4 (1Cement:2 Coarse Sand:4graded stone aggregate 20mm normal Size) and curing complete, including cost of form work in foundation and floors.
52	R.C.C. work with cement approved coarse sand and 20mm guage approved stone ballast in the proportion of 1:1.5:3 (1 Cement:1.5 coarse sand:3 stone aggregates) in slab excluding supply of reinforcemnt and its fixing and binding the same with 24 B.W.G.G.I. bindin wire and including necessary cenering and shutterin etc and also including supply of all materils, labour and tools and plants etc required for proper completion of the works. Binding wire cost being inluded in the tiem. (M-20)
53	TMT FE-500 or iron in plain work such as reinforced concrete orreinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
54	12mm cement plaster in single coat on fiar side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1) 1 cement:6coarse sand F.M. 2.25
55	12mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth and finshed even and smooth (1) 1cement:6coarse sand. F.M. 2.25
56	12mm thick plaster in 1:3 on ceiling and soffits of stainrs upto floor two level.
57	M-150 brick work in 1-6cement and coarse sand of 2.25 F.M. mortar in above plinth inclding supply of all materials labour tools and plants etc. required for proper completion of the work (1.6cement & Coarse sand)
58	Providing and lyaing vitrified floor tiles in different sizes(thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
59	Providing and lyaing vitrified floor tiles Kajaria/I.S.I. brand in different (thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
60	Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer of 1st quality conformign to IS : 15622 of approved make in colurs such as white, lvory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse Sand), jointing with gray cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete.
61	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be spefified bv the manufacuter) of approved make in all colurs, shades except burgundy bottle green blck of any size as approved by engineer-in-charge in skiting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
62	Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture liad over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polisheing to edges to give high glass finsh etc. complete at all levels granite of any colour and shade area of slab upto 0.50sqm (Granite)
63	Kota stoneslab flooring over 25mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 Cement :4 coarse sand):25 mm thick
64	25mm thick Kota stone slab in riser of steps, skiting 1:3 (1cement:3coarse sand) and jointed with gray slurry mix with pigment to match the shade of slab including rubbing and polishing complete.
65	40mm thick 1:2:4 plain cement concrete floor (1cement:2 coarse Sand:4graded stone aggregate 12-20mmnormal size laid in one layer neat cement.
66	20mm thick cement plaster in dado/skirign in 1:3 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio 5:1 including supply of all materials labour T & P etc. required for proper completion of the work
67	Providing and fixing glass strips of 3.15 mm (1/8\") thickness in joints of floor skirting dado at time of laying floors flush with floor level including supply of all material labour and T&P etc. required for proper completion of work 3.5cm depth
68	Finishing walls with premium Acrylic (Apex) smooth exterior paint with silicone additives of required shade New work (Two or more coats applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm)
69	Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give and even shade ever & Including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar Asian Paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inside walls+ Ceiling Area)
70	Providing and applying white cement based putty of average thickness 1mm approved brand and manufacture over the plastic wall surface to prepare the surface even and most complete
71	Supply & fixing of flush door commercial quality conforming to I.S. 2202 Part-I (1983) Including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, handles & spriings fitting with necessary screws complete. Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part-I), (Both Side Laminated) 35mm thick
72	Single Leaf
73	For Double leaf shutter add extra in over all rates (PWD-470, D-SOR 2020)
74	Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors chaukhats nosing.
75	Fabrication of angle iron door chaukhat of 40405mm.
76	Providing & fixing of door/windows grill.
77	Z-Section Steel widows
78	Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girthor samll articles not exceeding 0.10 sqm in area white superiorsynthetic enamel such as LUXOL3, Hi gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
79	Same as item but on new wood surface
80	Fixing of panes of glass with Atul or equivalent ISI marked quality putty brands & Springs complete including cost of materils labour etc (b) 4.0mm thick
81	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and cleresory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
82	Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required
83	Add for plaster drip Course/Groove in plastered surface or moulding to R.C.C. projections.
84	25mm thick 1:2:4 plain cementconcrete floor (1 cement:2coarse sand:4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement
85	Providing & Fixing stainless steel sliding door bolts ISI Marked anodised (dnodic coating not less tan grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x16mm
86	Providing and fixing stainles steel towerbolts (barrel type) with necessary screws etc. complete
87	300mm x 10mm
88	250mm x 10mm
89	Providing and fixing stainless steel handles with screws etc. complete (a) 125mm
90	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fitttings complete including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces.
91	Water proofing: Clean the previous surface property with wire brush b. Providing and doing a coat of approved cold bitumin priner (make. IWL Pidilite or eqv) @ 03 Lir. per Sqm over the entire dried area c. Providing and fixing App Polyester Membrane 2mm thick
92	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
93	Contingencies @ 2%
94	C.Estimate of Proposed Renovation of Type-III Residence -4 Nos. (Qty.-14)
95	Dismantling exiting plaster including disposal of refuse as directed by Engineer-Incharge with in a distance of 60 meters (200ft.)
96	Dismantling cement concrete or brick or granolithic floors including base cocrete and including stacking of dismantled maerials as directed by the Engineer-Incharge with in adistance of 60 meters (200ft.)
97	Dismantling of Reinforced cement concrete or Rainforced including stacking of dismantled materials a direced by the Engineer-Incharge with in as distnace of 60 meters (200ft)
98	Dismantling door or window including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
99	Dismantling of Brick work including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
100	Disposal of Malba (1 to 5 Km)
101	Providn and laying in cement concrete 1:2:4 (1Cement:2 Coarse Sand:4graded stone aggregate 20mm normal Size) and curing complete, including cost of form work in foundation and floors.
102	R.C.C. work with cement approved coarse sand and 20mm guage approved stone ballast in the proportion of 1:1.5:3 (1 Cement:1.5 coarse sand:3 stone aggregates) in slab excluding supply of reinforcemnt and its fixing and binding the same with 24 B.W.G.G.I. bindin wire and including necessary cenering and shutterin etc and also including supply of all materils, labour and tools and plants etc required for proper completion of the works. Binding wire cost being inluded in the tiem. (M-20)
103	TMT FE-500 or iron in plain work such as reinforced concrete orreinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
104	12mm cement plaster in single coat on fiar side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1) 1 cement:6coarse sand F.M. 2.25
105	12mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth and finshed even and smooth (1) 1cement:6coarse sand. F.M. 2.25
106	12mm thick plaster in 1:3 on ceiling and soffits of stainrs upto floor two level.
107	M-150 brick work in 1-6cement and coarse sand of 2.25 F.M. mortar in above plinth inclding supply of all materials labour tools and plants etc. required for proper completion of the work (1.6cement & Coarse sand)
108	Providing and lyaing vitrified floor tiles in different sizes(thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
109	Providing and lyaing vitrified floor tiles Kajaria/I.S.I. brand in different (thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
110	Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer of 1st quality conformign to IS : 15622 of approved make in colurs such as white, lvory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse Sand), jointing with gray cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete.
111	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be spefified bv the manufacuter) of approved make in all colurs, shades except burgundy bottle green blck of any size as approved by engineer-in-charge in skiting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
112	Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture liad over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polisheing to edges to give high glass finsh etc. complete at all levels granite of any colour and shade area of slab upto 0.50sqm (Granite)
113	Kota stoneslab flooring over 25mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 Cement :4 coarse sand):25 mm thick
114	25mm thick Kota stone slab in riser of steps, skiting 1:3 (1cement:3coarse sand) and jointed with gray slurry mix with pigment to match the shade of slab including rubbing and polishing complete.
115	40mm thick 1:2:4 plain cement concrete floor (1cement:2 coarse Sand:4graded stone aggregate 12-20mmnormal size laid in one layer neat cement.
116	20mm thick cement plaster in dado/skirign in 1:3 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio 5:1 including supply of all materials labour T & P etc. required for proper completion of the work
117	Providing and fixing glass strips of 3.15 mm (1/8\") thickness in joints of floor skirting dado at time of laying floors flush with floor level including supply of all material labour and T&P etc. required for proper completion of work 3.5cm depth
118	Finishing walls with premium Acrylic (Apex) smooth exterior paint with silicone additives of required shade New work (Two or more coats applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm)
119	Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give and even shade ever & Including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar Asian Paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inside walls+ Ceiling Area)
120	Providing and applying white cement based putty of average thickness 1mm approved brand and manufacture over the plastic wall surface to prepare the surface even and most complete
121	Supply & fixing of flush door commercial quality conforming to I.S. 2202 Part-I (1983) Including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, handles & spriings fitting with necessary screws complete. Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part-I), (Both Side Laminated) 35mm thick
122	Single Leaf
123	For Double leaf shutter add extra in over all rates (PWD-470, D-SOR 2020)
124	Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors chaukhats nosing.
125	Fabrication of angle iron door chaukhat of 40405mm.
126	Providing & fixing of door/windows grill.
127	Z-Section Steel widows
128	Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girthor samll articles not exceeding 0.10 sqm in area white superiorsynthetic enamel such as LUXOL3, Hi gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
129	Same as item but on new wood surface
130	Fixing of panes of glass with Atul or equivalent ISI marked quality putty brands & Springs complete including cost of materils labour etc (b) 4.0mm thick
131	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and cleresory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
132	Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required
133	Add for plaster drip Course/Groove in plastered surface or moulding to R.C.C. projections.
134	25mm thick 1:2:4 plain cementconcrete floor (1 cement:2coarse sand:4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement
135	Providing & Fixing stainless steel sliding door bolts ISI Marked anodised (dnodic coating not less tan grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x16mm
136	Providing and fixing stainles steel towerbolts (barrel type) with necessary screws etc. complete
137	300mm x 10mm
138	250mm x 10mm
139	Providing and fixing stainless steel handles with screws etc. complete (a) 125mm
140	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fitttings complete including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces.
141	Water proofing: Clean the previous surface property with wire brush b. Providing and doing a coat of approved cold bitumin priner (make. IWL Pidilite or eqv) @ 03 Lir. per Sqm over the entire dried area c. Providing and fixing App Polyester Membrane 2mm thick
142	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
143	Contingencies @ 2%
144	D.Estimate of Proposed Renovation of Type-IV Residence -4 Nos. (Qty.-53)
145	Dismantling exiting plaster including disposal of refuse as directed by Engineer-Incharge with in a distance of 60 meters (200ft.)
146	Dismantling cement concrete or brick or granolithic floors including base cocrete and including stacking of dismantled maerials as directed by the Engineer-Incharge with in adistance of 60 meters (200ft.)
147	Dismantling of Reinforced cement concrete or Rainforced including stacking of dismantled materials a direced by the Engineer-Incharge with in as distnace of 60 meters (200ft)
148	Dismantling door or window including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
149	Dismantling of Brick work including stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
150	Dismantling of roof concreteincluding stacking of dismantled materials as direced by the Engineer-Incharge with in a distnace of 60 meters (200ft)
151	Disposal of Malba (1 to 5 Km)
152	Providn and laying in cement concrete 1:2:4 (1Cement:2 Coarse Sand:4graded stone aggregate 20mm normal Size) and curing complete, including cost of form work in foundation and floors.
153	R.C.C. work with cement approved coarse sand and 20mm guage approved stone ballast in the proportion of 1:1.5:3 (1 Cement:1.5 coarse sand:3 stone aggregates) in slab excluding supply of reinforcemnt and its fixing and binding the same with 24 B.W.G.G.I. bindin wire and including necessary cenering and shutterin etc and also including supply of all materils, labour and tools and plants etc required for proper completion of the works. Binding wire cost being inluded in the tiem. (M-20)
154	TMT FE-500 or iron in plain work such as reinforced concrete orreinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
155	12mm cement plaster in single coat on fiar side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1) 1 cement:6coarse sand F.M. 2.25
156	12mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth and finshed even and smooth (1) 1cement:6coarse sand. F.M. 2.25
157	12mm thick plaster in 1:3 on ceiling and soffits of stainrs upto floor two level.
158	M-150 brick work in 1-6cement and coarse sand of 2.25 F.M. mortar in above plinth inclding supply of all materials labour tools and plants etc. required for proper completion of the work (1.6cement & Coarse sand)
159	Providing and lyaing vitrified floor tiles in different sizes(thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
160	Providing and lyaing vitrified floor tiles Kajaria/I.S.I. brand in different (thickness spefified by the manufacurer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc, complete (size of tile 600x600 mm) (Anti skid.mat finished tile)
161	Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer of 1st quality conformign to IS : 15622 of approved make in colurs such as white, lvory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse Sand), jointing with gray cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete.
162	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be spefified bv the manufacuter) of approved make in all colurs, shades except burgundy bottle green blck of any size as approved by engineer-in-charge in skiting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
163	Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture liad over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polisheing to edges to give high glass finsh etc. complete at all levels granite of any colour and shade area of slab upto 0.50sqm (Granite)
164	40mm thick 1:2:4 plain cement concrete floor (1cement:2 coarse Sand:4graded stone aggregate 12-20mmnormal size laid in one layer neat cement.
165	20mm thick cement plaster in dado/skirign in 1:3 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio 5:1 including supply of all materials labour T & P etc. required for proper completion of the work
166	Providing and fixing glass strips of 3.15 mm (1/8\") thickness in joints of floor skirting dado at time of laying floors flush with floor level including supply of all material labour and T&P etc. required for proper completion of work 3.5cm depth
167	Finishing walls with premium Acrylic (Apex) smooth exterior paint with silicone additives of required shade New work (Two or more coats applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm)
168	Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give and even shade ever & Including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar Asian Paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inside walls+ Ceiling Area)
169	Providing and applying white cement based putty of average thickness 1mm approved brand and manufacture over the plastic wall surface to prepare the surface even and most complete
170	Supply & fixing of flush door commercial quality conforming to I.S. 2202 Part-I (1983) Including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, handles & spriings fitting with necessary screws complete. Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part-I), (Both Side Laminated) 35mm thick
171	Single Leaf
172	For Double leaf shutter add extra in over all rates (PWD-470, D-SOR 2020)
173	Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors chaukhats nosing.
174	Fabrication of angle iron door chaukhat of 40405mm.
175	Providing & fixing of door/windows grill.
176	Z-Section Steel widows
177	Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girthor samll articles not exceeding 0.10 sqm in area white superiorsynthetic enamel such as LUXOL3, Hi gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
178	Same as item but on new wood surface
179	Fixing of panes of glass with Atul or equivalent ISI marked quality putty brands & Springs complete including cost of materils labour etc (b) 4.0mm thick
180	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and cleresory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
181	Making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required
182	Add for plaster drip Course/Groove in plastered surface or moulding to R.C.C. projections.
183	25mm thick 1:2:4 plain cementconcrete floor (1 cement:2coarse sand:4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement
184	Providing & Fixing stainless steel sliding door bolts ISI Marked anodised (dnodic coating not less tan grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x16mm
185	Providing and fixing stainles steel towerbolts (barrel type) with necessary screws etc. complete
186	300mm x 10mm
187	250mm x 10mm
188	Providing and fixing stainless steel handles with screws etc. complete (a) 125mm
189	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fitttings complete including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces.
190	Water proofing: Clean the previous surface property with wire brush b. Providing and doing a coat of approved cold bitumin priner (make. IWL Pidilite or eqv) @ 03 Lir. per Sqm over the entire dried area c. Providing and fixing App Polyester Membrane 2mm thick
191	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
192	Steel work in built up tublar trusses inluding cutting, hoisting , fixing in position and applying a priming coat of approved steel primer coat of approved steel primer, elded and bolted including special shapped washers etc. complete: Electric resistance of induction butt welded tubes.
193	Construction of Polycarbonate sheet 6mm thick including vertical surface fixed with J or L hooks, bolts and nuits 8mm diameter with bitumen and G.I. limpet washers orwith G.I. limpet washers filled with white lead (ID: 13299745522)
194	Contingencies @ 2%
195	Electrification [email protected]%
196	Power Wiring@4%
197	Cost of Sanitary @5%
198	Coast of Water [email protected]%
199	Add GST@18%
200	Labour Cess @ 1%
201	2. Renovation of Academic Building, Hostels and Main Building
202	Scraping old white colour wash including disposal refuse material materials as directed by Engineer-In-Charge with in a Distance of 60mt. (200 feet)
203	Dismantling of existing plaster including disposal of refuse within a distance of 60M
204	15 mm cement plaster in single coat on rough side of single or half brick wall for interior plaster upto floor two leavel including internal rounded angles chamfers and rounded angle not exceeding 80mm in girth and finished even and smooth. 1Cement:4 Coarse sand
205	P/L white cement based putty of average thickness of 1mm with labour and T&P complete
206	Providing and Laying oil bond distemper two coat on old surface
207	Finishing walls with two coat of acrylic smooth exterior paint of best quality including supply of all material, labour and T&P etc. required for proper completion of work
208	Dismantling cement concrete of bricks or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-In Charge with in a distance of 60mt. (200 feet)
209	Earth work in excavation in trenches for foundation pipes cable etc in ordinary soil (Loan lay or sand) including lift upto 1.5m. Lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer-I/C within a lead of 50m
210	40mm Thick Cement Flooring 1:2:4
211	M-150 Class brick work in 1:4cement and Coarse sand of1.25 fitness modulus mortar in super structure including supply of all materials, labour, tool and plants etc. required for proper completion of work
212	Painting and Varnishing two coats
213	Water Proofing treatment over the roofSpecification-a. Clean the previous surface properly with wire brush.b. Providing and doing a coat of approved cold bitumen primer (make IWL or pidilite or eqv.) @ 0.3 Ltr. per Sqm. over the entire dried area.c. Providing and fixing App Polyester membrane 2mm thick (make-IWL or pidilite or eqv.) on primed surface by TORCH application method and over lap must be 100mm on the joint.d. Providing and doing a coat of approved cold Bitumin Primer (Make IWL or Piditeor eqv.) @ 0.3 Ltr. Per Sqm. over the polyester membrane and fix the fiber net over on entire coated area with sand spreading to make the rough surface.e. Providing and doing 25mm thick cment and Plaster in ratio 1:3 (1 Cement :3 Coarse Sand) over the fiber net with Dr. Fixit pidiproofLW-200ML/Cement Bag and ffloating coat of neet cemnent (Doga) with Dr. Fixit pidicreat MPB in ration 10:1f. Making of gola all round foor far carrying the water proofing treatment upto groove.g. Cutting and filling of grove over gola.
214	S/F of 32mm. flush doors commercial quality conforming to I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers including all T&P etc. all comp.
215	M. Steel or Iron in small sections as chaukhats & Grills
216	Providing and fixing panes of glass 4mm thick equal or equivalent I.S.I. marked quality putty. Brads and springs includingT&P etc. all comp.
217	P.C.C. in 1:2:4 with cement approved C. Sand 20mmstone grit including supply of all T&P all comp.
218	R.C.C. in 1:1 1/2:3 cement approved C. Sand 20mm. Stone grit including supply of all T&P all comp.
219	Dismantling of Roof Concrete including stacking of dismantled material as directed by Engineer-Incharge within a distance of 60mt.
220	TMT Fe-500 or Iron in plan work such as reinforcementconcrete or reinforced bricks work (when not included on our all Rates) wrought to requiredshape as necessary including bending for proper completion ofthe work
221	P/L vitrified tiles ISI Mark with water absorption less than 0.08% and conforming to IS: 622 of approved make in all Colours and shades laid on 20mm thick cement Mortar 1:3 (1cement:3Coarse sand) including grouting the joints with white cement and matching pigment the complete work
222	P/F fly proof S.S. ( Grade 304) wire gauge of 0.5mm dia wire and 1.4mm aperture on both side for windows clerestory windows and doors with M.S. plate 15x3mm and nuts at bolts complete
223	Cantering and shuttering including strutting propping etc. and removal of from for all heights suspended floors, roofs landing balcony and access plateform with water proof ply 12mm thick
224	Structural steel work in single sectionfixed with or without connecting plats including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete.
225	Plumbing+Sanitary Work @15%
226	Power Wire+Electric [email protected] %
227	Contingency@5%
228	GST@18%
229	Labour Cess@1%
230	3. Renovation Road (Biumen Road, RCC Work & Interlocking Tile work) In HBTU Kanpur
231	A.Estimate of Proposed Repair, Re-Surfacing of Bitumen Roads
232	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
233	Cutting of earth (excluding rock) in trenches. plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (PWD-2.25a.)
234	Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to sile by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
235	Providing and laying Bituminous concrete using crushed stone aggregates of specified grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
236	Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on wellprepared surface and compacting with vibratory roller
237	Providing and applying primer coat with Diumen Emulsion (SS-1) on prepared surface of-granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502
238	Providing and applying tack coat with bitumen VG- 10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503
239	Contingencies
240	B. R.C.C. ROAD PATHWAY WITH KERB STONE AT REAR SIDE
241	Clearing Jungle Including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (PWD-2.31)REAR SIDE OF H.B.T.U.
242	Cutting of earth (excluding rock) in trenches, plinth,sides of foundations etc. In layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (PWD-2.258.)REAR SIDE OF H.B.T.U.
243	Earth work in exacavation in trenches for foundations and for pipes cables etc. In ordinary soll(loam clay or sand) Including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with In a lead of 50m. (PWD-2.8.1)DRAIN (300 X 450)MMPATHWAY EDGING
244	Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work, In foundation and floors. (PWD-281)DRAIN (300 X 450)MMPATHWAY EDGINGC.C. ROADPATHWAY
245	Construction of granular sub-base by providing close graded Material conforming to specifications; mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer- in-Charge. With material conforming to Grade-1 (size range 75 mm to 0.075 mm) having CBR Value-30,(ANALYSIS)C.C. ROAD
246	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3(1 cement: 3 coarse sand) including making joints with or without grooves (thickness of Joints except at sharp curve shall not to more than 5mm) Including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). (DSR 16.69-14.05%]K.C. DRAINS
247	R.C.C work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (1 cement 1.5 coarse sand 3 stone aggregates) in Slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works Binding wire cost being inluded in the item. (M-20) [PWD-5.3]R.C.C. ROAD
248	P/F TMT Bar -Fe 500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 5.22.6)
249	Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials,labour and Itools and plants etc.required for proper completion of the work. (PWD-6.1.1)DRAIN
250	15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) (PWD-13.5.1)DRAIN (300 X 450)MM
251	25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.(PWD- 14.69, SOR 2020)DRAIN (300 X 450)MM
252	Providing and laying of 80mm thick interlocking cement concrete tiles (30 Mpa) including levelling and dressing of suface to required level and slope, filling joints with local sand including the cost of labour, Material and T & P etc. required for proper complition of work as directed by Engineer-in-charge. (PWD CH. 26 ITEM NO. 2 NS)PATHWAY
253	Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, l/c cleaning the surface of all dirt, scales, oll, grease and other foreign mater;al etc. and lining out complete.DSR 16.47 1-14.05%)
254	Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-In-Charge. [DSR 16.46-14.05%]
255	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion 110 Imm diameter (DSR-12.41.2-14.05%)
256	Earth Filling (AR-1)C.C. ROAD
257	Sand Filling PWD 2.27C.C. ROAD
258	Disposal of Cutting Earth. (PWD-231,8-3)REAR SIDE OF H.B.T.U.
259	Extra for providing and mixing hardening compund of approved quality as per manufacturer specification in cement concrete
260	C. R.C.C. ROAD PATHWAY WITH KERB STONE AT REAR SIDE OF HBTU Kanpur
261	Cutting of earth (excluding rock) in trenches, plinth,sides of foundations etc. In layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (PWD-2.25a.)
262	Construction of granular sub-base by providing close graded Material conforming to specification, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site for all leads & lifts, prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-In-charge, with material conforming to Grade-I (size range 75mm to 0.075mm) having CBR value-30 (ANALYSIS)
263	Providing and laying at or near ground leavel factory made kerb stone of M-25 grade cement mortar 1:3 (a cement : 3coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than5mm) including making drainage opening wherever reuqired complete etc. as per direction of Engineer-In-Charge (length of finished kerb edging shall be measured for payment) (precast C.C. kerb stone shall be approved by Engineering-charge) [DSR 16369-14.05%]
264	Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work (PWD-6.1.1.)DRAIN
265	15mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement:4 coarse sand (PWD-13.5.1)
266	Providing and laying of 80mm thick interlocking cement concrete tiles (30 Mpa) including levelling and dressing of surface to required level and slope, filling joints with local sand including the cost of labour, Material and T&P etc. required for proper complition of work as directed by Engineer-In-Charge (PWD CH.26 ITEM No. 2NS)
267	Paintin runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road making paint of superior make as approved by the Engineer-In-Charge, I/C cleaning the surface of all dirt scales, oil gease and other foreign material etc. and lining out complete. (DSR 16.47, 1-14.05%)
268	Earth Filling (AR-I)
269	Disposal of Cutting Earth(PWD-231, a-3)
270	D. Estimat of Interlocking Tile in West Campus from GYM to AITH GATE
271	Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials,labour and Itools and plants etc.required for proper completion of the work. (PWD-6.1.1)
272	Cutting of earth (excluding rock) in trenches, plinth,sides of foundations etc. In layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (PWD-2.258.)
273	P.C.C. in 1:2:4 with cement approved C. Sand 20mmstone grit including supply of all T&P all comp.(PWD-4.1.3)
274	Construction of granular sub-base by providing close graded Material conforming to specifications; mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer- in-Charge. With material conforming to Grade-1 (size range 75 mm to 0.075 mm) having CBR Value-30,(ANALYSIS)C.C. ROAD
275	Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work, In foundation and floors. (PWD-281)C.C. ROAD
276	Providing and laying of 80mm thick interlocking cement concrete tiles (30 Mpa) including levelling and dressing of suface to required level and slope, filling joints with local sand including the cost of labour, Material and T & P etc. required for proper complition of work as directed by Engineer-in-charge. (PWD CH. 26 ITEM NO. 2 NS)PATHWAY
277	Add GST@18%
278	Labour Cess @ 1%
279	4.Renovation of 12 Labs
280	Renovation Work of Polymer Laboratory HBTU Kanpur
281	Dismantling cement concrete or brick or granolithic floor including stacking of dismantled materials as directed by Engineer-in-charge with in distance of 60mts. (Sch 697)
282	Cartage of Ballast, Kankar, Coal, Grit or Sand etc, including loading and unloading but excluding stacking on pucca roads. Upto 8 KM.(Sch 231(a))
283	Dismantling tile work in floors, walls and rools laid in cement mortar including stacking material within 50 metres lead. (For thickness of tiles 10 mm to 25 mm) (DSR 15.23.1)
284	Shifting of laboratory item to other area within the periphery manually (MR)
285	Dismantling doors and windows including stacking of materials as directed by Engineer-in-charge with a distance of 60 meters (200feet ) (Sch703)
286	Removing of dry or oil bound distemper by scrapping, sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. (DSR-13.91)
287	Removing oil paint or varnish from steel and other metal surface or from wood based surface with paint remover of approved brand manufactured or with caustic soda and making the surface even including cost of all materials (Sch. 657)
288	Dismantling 15 to 40 mm GI pipes including stacking of pipes with in 50mts lead as per direction of Engineer-in- charge. ( Sch no. 14.84)
289	RCC with 1:1.5:3 with cement, coarse sand and 20mm stone grit in columns, roof/T beams & slabs including all materials, labours, T&P etc all complete. (Sch 4.2.2)
290	MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work. (Sail Analysis)
291	Centering and Shuttering including strutting, propping etc. and removal of form work for (upto 5 floor) Retaining wall, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (Sch no.4.3.2)
292	M-150 brick work in 1:4 one cement and four coarse sand mortar in Superstructure including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Sch 6.4.1)
293	Repairs to plaster of thickness 12 mm to 20 mm m patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (8ch no. 4.1.2)
294	12 mm thick cement plaster in single coat of fair side wall with 1:4 cement & coarse sand including all labours, materials, T&P etc all complete. (Sch no. 13.4.1)
295	50 mm thick Cement concrete flooring with 1:3:6 of 1 cement 3 coarse sand & 6 stone grit of 10-20 mm size (S1 No. 4.17)
296	Providing and laying of 8 to 10 mm thick ivory or light shade Vetrified tiles of 600x600 mm size in flooring or skirting laid with 1:3 cement & coarse sand mortor finishing with slurry & with pigment grouting & polishing complete including supply of all materials, labours, T&P etc all complete. (Sch 11.47.2)
297	Finishing Wall with putty approved Brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour T&P etc. required for completion of work (SOR chapter 15 New)
298	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1)
299	Painting 2 coats of ready mixed enamel paints on wood or steel works as door, window, ventilation, almirah etc. as previous painted surface. (PWD Sch 643)
300	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per I8 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit (Sch no. 9.105.1)
301	21 Making 2\"x2\" space in false ceiling for ceiling light Including fixing of aluminium tube on sides for supports & finish with POP etc all complete
302	Supply and fixing of poly propelene wash basin of size(24\" X18\" x8\") all work complete (MR)
303	Renewing float glass panes of nominal thickness 5mm( weight not less than 12.5 kg/sqm) with wooden fillets wherever necessary. (Sch 14.7.2)
304	type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (Sch ??. 24.2) Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
305	Supply and fixing AC of 2 tonnes od brands like voltas,LG and equivalent all complete (MR)
306	Providing and fixing of blinds on window including all fixtures and arrangement etc all complete. (MR)
307	Providing and gum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (MR)
308	Dismantalling of old damage plaster.sor 706 +707
309	12 to 20 mm thick cement plaster in 1:4 cement & coarse sand mortor. 13.5.1
310	Electrification [email protected]%
311	Power Wiring@4%
312	Cost of Sanitary @5%
313	Coast of Water [email protected]%
314	Add GST@18%
315	Labour Cess @ 1%
316	5. Interlocking Work in front of TYPE- II, III & IV Residence
317	Construction of granular sub-base by providing close graded material conforming to specification, mixing in a mechnical mix plant at OMC. Carriage of mixed material by tippers to work site, for all leads & lifts, spreadin in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibraory power roller to achieve the desired density, coplete as per specifications and directions of engineer-incharge with material conforming to Grade-I (Size range 75mm to 0.075mm) having CBR value-30 (ANALYSIS)
318	Type IV Residence
319	Type III Residence
320	Type II Residence
321	Providing and laying of 80mm thick interlocking cement concrete tiles ( 30Mpa) Including levelling and dressing of suface to required level and slope, filling joints with local and including the ost of labour material and T & P etc. required for proper compilition of work directed by Engineer-Incharge (PWD CH.26 ITEM No. 2Ns.)
322	Type IV Residence
323	Type III Residence
324	Type II Residence

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Various Type Of Maintenance Work In Hbtu Kanpur, Kanpur-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Various Type Of Maintenance Work In Hbtu Kanpur, Kanpur-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us