Tender For Reconfiguration Of Existing Terminal Building At Aurangabad Airport – Sh : Providing & Placing Check In Counters, Immigration Counters, Emigration Counters And Other Counters For Reconfiguration Works At Aurangabad Airport
Tender Value
1.50 Crore
Estimated cost
Bid Submission
09 Dec 2023
0 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Reconfiguration Of Existing Terminal Building At Aurangabad Airport – Sh : Providing & Placing Check In Counters, Immigration Counters, Emigration Counters And Other Counters For Reconfiguration Works At Aurangabad Airport
BOQ
| Sl. No. | Item Description |
| 1 | Providing and placing standard immigration counter unit of size 2.2m length, 1.8m width and 1.2m height as per drawing shown and the specifications are as follows: 1. Counter top/ working desk with solid acrylic polymer of approved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood. 4. Bottom floor with 19mm commercial plywood and PVC flooring raised above 150mm from finished floor level. 5. Single leaf door of 12mm thick swing opaque glass with necessary hinges of make Dorma/ Ozone and locking arrangement etc. 6. 03 Drawers of 300mm wide below working desk as per drawing shown at each side. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer-In-Charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 2 | Providing and placing standard custom counter unit of size 0.90 m length, 0.45 m width and 1.05 m height as per drawing shown and the specifications are as follows: 1. Counter top/ working desk / writing desk with solid acrylic polymer of approved make andapproved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood.4. 02 Drawers as per drawing shown at each side. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 3 | Providing and placing standard Check in counter unit of size 1.00 m length, 0.90 m width and 1.20 m height as per drawing shown and the specifications are as follows: 1. Counter top/ working desk with solid acrylic polymer of approved make and approved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood. 4. Monitor rack, Drawers, ATB, BTP, false floor arrangement etc. should be provided as per the drawing. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge.Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 4 | Providing and placing Customs inspection table unit of size 2.40 m length, 0.80 m width and 0.60 m height as per drawing shown and the specifications are as follows: 1. Table top should be provided with Granite of thickness 18mm over supporting members. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 5 | Providing and placing Table for Stamping Boarding Passes as per design provided in architectural drawing of size 300mmx450mmx1000mm, made of 19 mm thick block board/ 18 mm thick commercial plywood (Merino, century, green ply or equivalent) exterior finish surface withsolid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color and all interior surface with 1 mm thick laminate of approved shade/color (greenlam/merino/century or equivalent) on all inside surface, priming and painting of unexposed area, complete with edge beading, hardware as required, nylon base pads etc. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 6 | Supply and Installation Manual baggage table as per architectural drawing of size 750mm x1220mm x 800mm made of 19 mm thick block board/ 18 mm thick commercial plywood (Merino, century, green ply or equivalent) exterior finish surface with 1 mm thick laminate of approved shade/color (greenlam/merino/century or equivalent) and priming and painting of unexposed area complete with necessary ss hardware, adhesive etc. The table shall have granite top. Supplier shall submit laminate, board, granite samples for approval. |
| 7 | Supply and Installation Security check pedestal as per architectural drawing of size 750m x750mm x150mm made of 19 mm thick block board/ 18 mm thick commercial plywood(Merino, century, green ply or equivalent) exterior finish surface with 1 mm thick laminate of approved shade/color (greenlam/merino/century or equivalent) and priming and painting of unexposed area complete with necessary etc. The table shall have flmed granite top. Supplier shall submit laminate, board, granite samples for approval. |
| 8 | Providing Ladies Frisking booths of over all size 1020mm x 2000mm x 2100mm height. The poles are made of 40 x 40mm, 2.0mm thick SS 304 grade pipes and Horizontal members are made of 40x20mm 1.6mm thick SS 304 grade pipes 300mm x 300mm x 4mm thick base plate for 6 nos. poles and spacing is to be provided as per drawing. Providing 1400mm height 35mm thick partition made with suitable approved fabric over 4mm thick drawing pin board pasted to 8mm thick MDF (exterior grade) board total partition shall be fixed around with SS channel. Longitudinal top sides of 600mm height shall be provide with 8mm thick transparent acrylic sheet fixed with silicon sealant with SS channel and front/Back top side of 300mm height shall be provided with same 35mm thick fabric partition and providing necessary arrangements for hanging curtains at 180mm height (on front / back sides ) as per the approved drawings including placing at site with all labour charges, necessary taxes and transportations etc. complete as per the directions of the Engineer-in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. |
| 9 | Providing & Placing of Standard Boarding Gate Counter of size 900 x 450 x 1050 mm as per approved drawing, made of thick Boiling water proof plywood /18 mm thick (BWP) (Green ply, Merino, Century ply or equivalent with 12mm thick acrylic soild polymer of approved make and approved shade/ colour and interior finish with 1 mm thick laminate (suede/ gloss finish of approved colour and pattern) with all necessary frames works of block board/ MS screws/ hinges/ telescopic channels for drawers/ handles. Locks/ bottom support/ necessary cutouts/ wire manager etc. all complete as per drawing, fixing of solid acrylic polymer with necessary moulding of edges, fixing of laminate, drawers, shutters and all necessary hardware etc. complete as per the directions of the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Dec 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender