Construction Of Segregation And Storage Shed Of Decentralized Swm Unit At Ramsai Gram Panchayat Under Maynaguri Block, Dist- Jalpaiguri. (Total Unit 02 Nos)
Tender Value
5.05 Lakhs
Estimated cost
Bid Submission
11 Dec 2023
0 days left
EMD
10104
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maynaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Segregation And Storage Shed Of Decentralized Swm Unit At Ramsai Gram Panchayat Under Maynaguri Block, Dist- Jalpaiguri. ( Total Unit 02 Nos )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in all sorts of soil (including mixed soil but excluding late rite and sand stone) including removing spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with earth. in layer not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be on basis of measurement of finished quantity of work.)(a) with earth obtainedfrom excavation of foundation |
| 3 | Earth work in filling in foundation trenches or plinth with earth. in layer not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be on basis of measurement of finished quantity of work.)© with carried earth arrange by the contractor within a radius of 1 km |
| 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to Proper level and filling joints with local sand. |
| 5 | Cement Concrete with graded stone (30 mm size) excluding shuttering |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. |
| 7 | Reinforcement for Reinforced Concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. Including supplies of rods , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. |
| 8 | Hire and labour for shuttering with centering and necessary staging upto 4 m using approved stout and thick hard wood planks ……………. Fitting, fixing & striking out after completion of works (upto roof of groung floor)(a) 25 mm to 30 mm th. Wooden shuttering as per decision & direction of Engineer-in-Charge. |
| 9 | Hire and labour for shuttering with centering and necessary staging upto 4 m using approved stout and thick hard wood planks ……………. Fitting, fixing & striking out after completion of works (upto roof of groung floor)(b) With out staging in foundation and plinth. |
| 10 | 125 mm th. brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 11 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) includingn smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and applicationn of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (In ground floor) 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement.(i) 20 mm. thick Sq. M |
| 12 | Plaster (to wall, floor, celling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] |
| 13 | Neat cement punning about 1.50 mm. th. in wall, dado, window, sills, floor, drain etc.NOTE : Cement 0.152 cu. M. per 100 sq. m. |
| 14 | Applying decoretive cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufacturer\"s specification. |
| 15 | Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of siz 37.5mmx25mm). In ground floor. |
| 16 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor. (b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply ofmaterials and labour complete.(15% extra over the corresponding item of grill )(@ Rs = 10021 x 15% = 11524.15) |
| 17 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. b) Span beyond 12 Mtr and up to 20.00 MtrI) For structural members of specified sections weighing less than 22.5 Kg./m |
| 18 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) i) In roof (with 0.60 mm thick sheet) |
| 19 | Galvanised iron sheet ridging fitted and fixed with necessary bolt screws washers ec complete(225 mm end laping)a) 300 mm lapping each waya)with 0.60 mm sheet |
| 20 | Providing and fittingConcrete Sign Board as per IRC specification of size 900x750x37 mm thick made with RCC 1:1.5:3 withN.B. variety stone chips reinforced with duble layer IRC febric (75x75 mm mesh) and fixed with necessary nuts & bolts on two RC precast posts 100mm x150 mm of height 2.65 m of which top 750 mm is of 100 x13 mm and 1.90 m above GL & 0.75 m below GL including digging hole, repacking the same with cement concrete 1:3:6 with local stone chips etc. complete including painting two coats on noth faces lettering sign marks etc. as per direction of Engineer-in charge. |
| 21 | Addl. GST @18% |
| 22 | Addl. LWC @1% |
AI Tender Summary
Tender Timeline
Nov 30, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender