Tender For Repair / Replacement Of Joinery In Zone B Area Of Age B / R-I Under Ge ( West ) Lucknow.; 1 Demolition of brick or stone/boulder masonry built in cement or cement lime mortar complete all as specified and as directed. 2 Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. 3 Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. 4 Taking down cementor cement lime plaster on brick or stone walls etc. including raking out joints, hacking forkey, scrubbing down with water, etc complete all as specified and as directed. 5 Material and Labour for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and even and smooth without using extra cement complete all as specified and as directed. 6 Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (as per manufacture instruction) on fair faces of brick work or concrete surface and finishing the surfaceeven and smoothwithout using extra cement all as specified and directed. (Note:- Water proofing compund shall be measured and paid seprately.) 7 Supply only integral water proofing compound conforming to IS 2645 complete all as specified and as directed. 8 Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but n. exc one brick complete all as specified and as directed. 9 Taking down chowkhat with shutter (without taking off shutter from the frame)area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed. 10 Taking down chowkhat with shutter (without taking off shutter from the frame)arean.exc 1.5 sqm each complete all as specified and as directed. 11 Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and as directed. 12 Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and as directed. 13 Taking down chawkhat with shutter (without taking off shutter from the frame) exc 1.5 n. exc 4 sqm each and refixing in the same opening complete all as specified and as directed. 14 Taking down and refixing only shutter of any description exc 1 but n. exc 2 sqm in the same opening complete all as specified and as directed. 15 Supply and fixing mild steel framed work as in door or gate of angle or other section with gusset plates,rails,braces,etc using ornamentel design as approved complete drilled for fixing of steel sheeting or other covering,doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging,fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.Note: Machine butt hinges and flat iron hold fasts to be measured seprately 16 Supply and fixing 1.0mm thick mild steel plain black sheet in hearth covering to door shutters covering to door chawkhats (frames) chullahoods, watertanks, water troughs, ducts, urinal troughs and funnel etc cut to size edges beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded / riveted seams including bending , turning up, mitread angles stooped ends outlets etcas required complete all as specified and as directed. 17 Supply and fixing Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle cleat for securing purlinto wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and as directed. 18 Supply and Fixing Factory made steel windows double shutter with tubular frame of size 40x79mmm having thickness of steel sheet not less than 1.5mm with Z sectionside hung glazed shutter fixed (with sash bar) on external side and with wire guage shutter (without sash bar) on internal side and includingsteel handle 100mm longof MS flat 20x5mm made to shape 02 nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standerd quality complete all as specified and as directed 19 Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. 20 Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed. 21 Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. 22 Supply and Fixing Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. 23 Supply and Fixing Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and as directed. 24 S & F 100x 60mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum all as specified and directed.(a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity.(b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed. 25 S & F 130 x 65mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum all as specified and directed.(a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity.(b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed. 26 Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed by Engineer-in-Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 27 Supply and fixing second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed 28 Supply and fixing 30mm thick Second class hard wood (sal)glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamferedor rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(b) supplied and fitted to chawkhats complete all as specified and as directed 29 Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 30 S & F 19mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foamsheet single extruded with 0.8 to 1mm thick outer layer having density not less than 1400Kg/Cum and density of center core not less than 600 Kg/Cum, with prelamination on both front (decorative) and back (white) side manufactured by and ISO 9001.2015 certified company complete all as specified and as directed 31 Supply and fixing 35mm thick Second class hard wood (sal)glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamferedor rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats all as specified and directed. 32 Supply and fixing for 35mm thick plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. 33 Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminiumframe for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed. 34 Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed 35 Supply and fixing in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and as directed. 36 Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open tracksection 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc all as specified and directed. 37 Supply and fixing 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed 38 Supply and fixing in repair 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed 39 Supply and fixing in repair 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and as directed. 40 Supply and fixing 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and as directed. 41 Supply and fixing in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and as directed. 42 Supply and fixing 150mm size aluminium handle, fabricated type anodised, ISI markedcomplete all as specified and as directed. 43 Supply and fixing aluminiumanodized barrel tower bolts 200 mm of extruded section all as specified and directed. 44 Supply and fixing in repair for aluminiumanodized barrel tower bolts 200 mm of extruded section all as specified and directed. 45 Supply and fixing in repair plain Aluminium sheet 0.56mm thick fixed with nails to wooden shutters complete all as specified and as directed. 46 Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and as directed. 47 Supply and fixing in repair aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and as directed. 48 Supply and fixingbutt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and as directed. 49 Supply and fixing stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and as directed. 50 Supply and fixing 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed. 51 Supply and fixing butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and as directed. 52 S & F 18/19 mm thickcomercial plywood interior grade both side fixed with screwed to timber frame work edge chamfered including beading/battens as requiredas directed by Engineer-in-Charge complete all as specified and as directed. 53 S & F 0.9 mm thick Decorative laminate (sunmica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructionas directed by Engineer-in-Charge complete all as specified and as directed. 54 Supply and fixing 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and as directed. 55 S&F Auto concealed Hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and as directed 56 Supply and fixing in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. 57 Supply and fixing in repair rubber beading size 65x5mm for doors complete all as specified and as directed. 58 Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 59 Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 60 Supply and fixing aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and as directed. 61 Supply and fixing in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and as directed. 62 Supply and fixing 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. 63 Supply and fixing in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. 64 Supply and fixing in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and as directed. 65 Supply and fixing in repair 600x450mm bevelled edge mirror of fancy type selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed. 66 S & F in repairSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and as directed.Make : Jaguar Cat No 7771 or equivalent of Marc/ESS 67 Supply and fixing in repair Glass corner self fancy type 250x250 and 10mm thick fixed its brass bracket and screwed complete all as specified and as directed. 68 Supply and fixing in repairs Mild steel window handle left/rightincluding neccesary welding complete all as specified and as directed. 69 Supply and fixing in repairs Mild Steel window peg stay for supporting window glass etc complete all as specified and as directed. 70 Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing complete all as specified and as directed. 71 Material and Labour for 3mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and as directed. 72 Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed 73 Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 74 Material and Labourfor preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 75 Material and Labourfor preparation of old painted surface of steel of any description over 10 cm width or girth not otherwise described and appying one coat of synthetic enamel paint complete all as specified and as directed. 76 Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and as directed. 77 Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed 78 Material and Labourfor preparation of new plastered surfaces of wall and applying two coats of oil bound distamper complete all as specified and as directed. 79 Material and Labourfor preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. 80 Material and Labourfor preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed. 81 Material and Labourfor prepration of old treated/plastered surface and applying two coats of white washing to wall surface including preparation of old treated surface complete all as specified and as directed. 82 Supply and fixing 8 to 10 mm dia dash through bolts (anchor fastner) of lenth exc 75mm but n exc 100mm including drilling holes in concrete/masonary walls structure using electrically oprated drill machine complete all as specified and as directed. 83 Supply and fixing in repair stainless steel peg set of six pegs complete all as specified and as directed 84 S & F in repair 25mm diafancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and as directed. 85 Material and labour Running welding in repairs thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed. 86 Material and labour spott Welding in repairs n. exc 2.5cm in length thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed. 87 Supply and Fixing in repair Plain fillets square, rectangular or triangular in sectionexc 3 Sqcm n exc 6 Sqcm, Wrought finished, secured with nails or brads as in beads complete all as specified and as directed. 88 Supply and fixing in repair 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed 89 Material and Labour in repair for Rolled mild steel section in Roof trusses (framed) trussed purlins, crane gantries, rails and fastening and heavy bracket framing ( Beam tee, angle channel or flat sections) etc Fe 290 (Gde-E-165) complete all as specified and as directed 90 Supply and fixingin repair for 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 91 M & L for prepration of new or previously untreated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide complete all as specified and as directed. 92 S & F in repair suspendedfalse ceiling with E grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. 93 Taking down and refixing of aluminiun window shutter (sliding/opanable) in the same opening after repair/overhaulingof aluminium shutter complete incl all necessary dpares all as specified and directed. 94 Supply and fixin in repair for aluminium section of size 38x65x1.3mm thickpartition wall/wall panelling fixed to wall on aluminium frrame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and as directed. 95 Supply and fixing in repair Gypsum board 600x600x12mm thick (texture finish), whihte prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T- section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from0.33mm thick GS sheet of size 24x32x300mm and spaced at 1200mm c/c securely fixed to be structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug screw etc. The last hanger at the end of each main runner shall not be grater than 450mm from ajecent wall flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm c/cform 600x600mm module cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mm x19mm and 300mm long of white colour all as per manufaturers complete all as specified and as directed 96 Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed. 97 Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.
