|
| 1 | Code No.2.8.10 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means infoundation trenches or drains (notexceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil |
| 2 | Code No.2.27 Supplying and filling in plinth with river sand under floors, including watering ,ramming consolidating and dressing complete |
| 3 | Code No.4.1.10Providing and laying in position cementconcreteof specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 4 | Code No.5.2.3Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars ,piers , abutments , posts and struts etc.upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mm nominal size) |
| 5 | Code No.6.1.2Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Code No.11.3.1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate |
| 7 | Code No.10.16.1Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting ,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes |
| 8 | Code No.12.80Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc., |
| 9 | Code No.13.61.1Painting with synthetic enamel paint ofapproved brand and manufacutre to give an even shade - Two or more coats on new work |
| 10 | Code No.14.43Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete |
| 11 | Code No.13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer |
| 12 | Code No.13.60.1A Wall painting with plastic emulsion paint - Royal of approved brand and manufacture to give an even shade - two or more coats on new work |
| 13 | Code No.9.48.2Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc |
| 14 | Code No.13.50.3Applying priming coat - with ready mixedred oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works |
| 15 | Code No.13.61.1Painting with synthetic enamel paint ofapproved brand and manufacutre to give an even shade - Two or more coats on new work |
| 16 | Code No.9.165.1AProviding and fixing of 65mm Godrej Navatal lock of 6 levers etc complete |
| 17 | Code No.1.1.1.2 Supplying and fixing of following size of PVC conduitalong with the accessories in surface/recess Conduit including cutting the wall and making good the same in case of recessed conduit as required. Make: Avonplast/ Vijaya :- 25mm dia |
| 18 | Code No.1.1.3.4.3 Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required .Make:Avonplast/Vijaya:- 25mm deep Junction Box three way |
| 19 | Code No.1.3.8Supplying and fixing of the following sizes of Teak woodenboard on recess including cutting the wall and finishing the surface good the same as required - 250mm X 200mm X 50mm. Deep |
| 20 | Code No.1.3.12Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 300mm X 250mm X 50mm. Deep |
| 21 | Code No.1.5.1Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:- |
| 22 | Code No.1.5.2Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:- |
| 23 | Code No.1.5.3Supplying and drawing of 4.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:- |
| 24 | Code No.1.6.8Providing and fixing of following size phenolic coated sheet onexisting wooden board: - 250mm X 200mm X 3mm Thick |
| 25 | Code No.1.6.12Providing and fixing of following size phenolic coated sheet on existing wooden board: - 300mm X 250mm X 3mm Thick |
| 26 | Code No.1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required .Make: Kundan/Anchor/Vinay :- |
| 27 | Code No.1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush typeswitch on the existing switch box/cover including connections etc. asrequired. Make: Kundan /Anchor /Vinay:- |
| 28 | Code No.2.4.1 Supplying and fixing of sheet steel, DP switch Rewirable porcelain fuse unit, 230volts including drilling holes on the board, connections, earthing the body etc. as required:-16Amps double pole main switch.Make:Standard/Havells |
| 29 | Code No.1.7.1.14Supplying and fixing Electronic Dimmer 400W socket type on the existing switch box/cover including connections etc. as required .Make: Kundan /Anchor/Vinay:- |
| 30 | Code No.1.7.2.1 Supplying and fixing 3 plate, 5 amp.ceiling rose on the existing junction box/wooden block including connections etc. as required.Make: Kundan/ Anchor/ Vinay:- |
| 31 | Code No.1.7.2.2 Supplying and fixing jumbo type Batten/Angle Holder includingconnections etc. as required .Make: Kundan/Anchor/Vinay:- |
| 32 | Code No.1.7.3.16A Supplying and fixing of 20A single phase DP main switch withKeycard Switch on the existing modular plate and switch box including connections but excluding modular plate as required.Make: MK :- |
| 33 | Code No.2.1.1 Supplying and fixing following way single pole and neutral,sheet steel, MCB distribution board, 240volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections,phosphatizedand powdered painted including earthing etc as required:(But without MCB/RCCB/Isolator) Make: Siemens /ABB/L&T Hager. 4 Way - SPN,double door,MCB DB |
| 34 | Code No.30.51Supplying and fixing 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj |
| 35 | Code No.3081 Supplying and fixing Bulk head fitting aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type). Make: Philips/Bajaj |
| 36 | Code No.30.53 Supplying and fixing1 x 36w/40w Single tube Street light fittings with sheet aluminium housing and UV stabilized acrylic cover.Make: Philips/Bajaj |
| 37 | Code No.31.27Supplying and fixing 1200mm sweep double ball bearing ceiling fan.Make:Almonard/Usha |
| 38 | Code No.3.1 Earthing with G.I.medium pipe 3.0 mt long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required:- |
