}

Tender For Provision Of 04 X Toilets And 4 X Bathrooms At Tyakshi Under Ge Partapur, Leh-Jammu And Kashmir

Military Engineer Services-MES has published Tender For Provision Of 04 X Toilets And 4 X Bathrooms At Tyakshi Under Ge Partapur. Submission Date for this Tender is 19-12-2023. Toilet Bathroom Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

40847126
Tender For Provision Of 04 X Toilets And 4 X Bathrooms At Tyakshi Under Ge Partapur
Open Tender
Indian
Jammu And Kashmir
Leh
19-12-2023

Tender Details

Tender For Provision Of 04 X Toilets And 4 X Bathrooms At Tyakshi Under Ge Partapur; 1 Surface Dresssing Nexc 30Cm Deep And Averaging 15Cm Deep In Hard / Dense Soil And Getting Out. 2 Excavation In Trenches N.Exc 1.5 Mtr Wide & N.Exc 1.5 Mtr Deep In Hard / Dense Soil And Getting Out Complete All As Specified. 3 M&L For Cement Concrete Type D-2, 1:4:8 Mix Using 40Mm Graded Stone Aggregate As In Foundation / Manholes Foundation Fillings, Mass Concrete Complete All As Specified And Directed. 4 M&L Precast Cement Concrete Block Masonry With Solid Blocks Exc 20 Cm In Width Andset In Cm 1:6, Type C1 1:3:6 ( 20 Mm Graded Aggregate ) . 5 M&L For Rcc M-30 ( Design Mix ) ( 20Mm Graded Aggregates ) Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc. Basement Slabs, Under-Reamed Piles And Mass Concrete. 6 M&L For Rcc M-30 ( Design Mix ) ( 20Mm Graded Aggregates ) In Columns, Pillars, Piers, Posts And Struts Complete All As Specified. 7 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Thk In Soft Soil. 8 Removing Excavated Materialn.Exc 50M And Depositing Where Directed At A Level N Exc. 1.5M Above The Starting Point 9 M&L For Rcc M-30 ( Design Mix ) ( 20Mm Graded Aggregates ) In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span All As Specified. 10 M&L For Rcc M-30 ( Design Mix ) ( 20Mm Graded Aggregates ) In Slabssupportedonwalls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves, Complete All As Specified. 11 M&L For Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work. 12 M&L For Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions For Fair Finish, Complete All As Specified And Directed. 13 M&L For Formwork To Soffits Of Flat Surface Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Notexceeding 200Mm Thick ( Horizontal Or Sloping ) For Fair Finish Surface Complete All As Specified. 14 M&L For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunch-Ings, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Complete All As Specified And Directed. 15 M&L 15Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfacesin Cement Mortar 1:4, Finishing The Surface Fair And Even Complete All As Specified And Directed. 16 M&L 10Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfacesin Cement Mortar 1:6, Finsihed The Surfaces Even And Fairwithout Using Extra Cement. 17 M&L 5Mm Thick Rendering On Concrete Surfacesin Cement Mortar 1:3 , As In Ceiling, Finsihed The Surfaces Even And Smoothwithout Using Extra Cement. 18 M&L Preparing Of New Surface Of Plaster And Applying Two Coats Of White Wash On Wall. 19 M&L For Preparing Of New Plastered Surface And Applying Two Coats Cement Basepaints On Walls. 20 M&L Preparing Of New Surface Of Plaster And Applying Three Coats Of White Wash On Ceiling. 21 M & L Plain, Solid, Straight Chowkats And Frames 2Nd Class Hardwood, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints, Supplied And Fixed Comoplete All As Specified And As Directed. 22 S&F35mm Thick 2Nd Class Hard Wood Plain, Framed, Panelled Shutters ( Two Panels ) With Lock Rail Andpanels Of 9Mm Thick Bwp Commercial; Ply Or 12Mm Thick Veneered Particle Boards On Both Sides. The Size Of Rail And Style As Per Is-1003 ( Part-I ) Kiln Seasoned And Chemicaly Pressure Treated. 23 M&L Preparing New Wooden Or Wood Based Surfacesof Any Description Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Of Pink Primer Complete All As Specified & Directed. 24 S&F Galvanized Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Fixed With Tinned Tacks Or Galvanised Wire Staples All As Specified & Directed By Engineer-In- Charge 25 M&L 75Mm Thk. Pcc 1:4:8 Type D2 Under Flooring , Using 40Mm Graded Stone Aggregates As In Sub Base Complete All As Specified And Directed. 26 M&L For 25Mm Thick Cement Concrete Type B-0 1:2:4 ( 12.5Mm Graded Aggregate ) As In Sub Floor Complete All As Specified And Directed. 27 M&L Non Skid Cerermic Coloured Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exc. 0.11 Sqm But N.Exc. 0.18 Sqm, Set And Jointed In Neatcement Slurry And Pointed In White Or Coloured Cementwith Pigment To Match Over 15Mm Thick Screed Bed In Cement Mortar ( 1:4 ) Complete All As Specified. 28 M&L For Coloured Glazed Ceramic Tiles In Vertical Surface 300X200x7 Mm Thick Set And Jointed In Neat Cementslurry Over 10 Mm Thick Rendering In Cm 1:3 And Pointed In White To Match Complete. 29 M&L For Steel Tmt Bars, 10 Mm Dia And Over , Cut To Length, Bent To Required Shape Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Anealed ) Not Less Than 0.9 Mm Dia Or Securing With Clips Complete 30 - Ditto As Per Above Itembut6mmto 8Mm Dia. 31 M&L 15Mm Thick Rendering On Terrace, Sides Of Parapet In Cement Mortar 1:4 With Water Proofing Compound, Finished Even And Fair. 32 S&F For Butthinges, Extrudedaluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised 100Mm Long All As Specified. 33 S&F For 150Mm Aluminium Anodised Barrel Tower Bolts Of Extruded Section All As Specified. 34 S& F For 200Mm Aluminium Alloy Anodised Sliding Bolts With Hasp, Staple And Fixing Clips Of Sheet, Cast Or Extruded Section Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed. 35 S&F For 125Mm Aluminium Handles, Cast Type , Anodised And Pattern / Design As Approved. 36 M&L For Hard Core Of Broken Stone Of Bouders N Exc 63 Mm Deposited, Spread And Levelled In Layers N Exc 15 Cm Thick Watered And Rammed To A True A Surface. 37 M&L For 75 Mm Thick Cement Concrete 1:3:6 Type C-2 ( Using 40Mm Graded Crushed Stone Aggregate ) As In Paving / Plinth Protection Finished Even And Smooth , Without Using Extra Cement Incl Necessary Form Work Complete All As. 38 S&F Stainless Steel ( Ss ) Squatting Pan, Orrissa Pattern Size 580X440mm White With Pvc P Or S Trap With Integral Foot Rest Of Any Pattern Along With Wc Connector Incl Connection To Trap & To Flushing Pipe, Antisyphonage Pipe Etc Making Good To Floor Complete. 39 S&F Wash Basin Vitreous China White Flat Black Size 550X400mm Including Bracketscomplete And Waste Coupling Of Ptmt ( Half Or Full Threaded ) . ( Minimum Weight 32Mm-45Gms ) 40 S&F Pvc Low Level Flushing Cistern 10 Ltrs Capacity, White Symphonic Action With Ball Valve, Float And Handle Including Flush Pipe And Brackets. 41 S & F 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washer 42 S&F Pvc Waste Pipe 750Mm Long With Cap Of 32Mm Bore Dia Waste Coupling 43 S & F Pvc Connection 600 Mm Long With Two Brass Coupline.Pipe Of 15Mm Dia Of Pressure Tating 6Kgs / Cm2 Complete All As Specified 44 S&F Grating Doom 100Mm Dia Pt Mt Weight 25Gms 45 S&F Brasschromium Plated Tubular Towel Rail, 20Mm Dia Between Flanges Complete All As Specified And Directed. 46 S&F For 3-Layer Pp-R Polypropylene Random Copolymer ) Pipes Sdr 7.4 & Sdr 11 Uv Stablised And Antimicrobial Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Of 20 Mm Dia Complete, All As Specified & Directed. 47 S&F Stop / Angle Cock 15Mm Bore, Fancy Type Cast Copper Alloy Chromium Plated , Screwed Down, High Pressure, With Crutch Or Butter- Fly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed. 48 S&F 15Mm Bore Pillar Taps Cast Copper Allow With Screwed Shancks And Fixed Complete All As Specified And As Directed. 49 S&F 15Mm Dia Bib Taps, Cast Copper Alloy With Crutch Or Butter Fly And Screwed For Iron Pipe Or For Brass Ferrule And Fixed. 50 S&F For Pp-R Gate Valves ( Brass Insert ) As Per Requirement Of The Size Of 20 Mm Dia Complete All As Specified And Directed. 51 M&L 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete. 52 S&F Pvc ( Swr ) 110Mm Dia Mtr Pipe Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors. 53 S & F Pvc ( Swr ) 110Mm Dia Mtr Bends Any Radius 54 S&F Pvc ( Swr ) 75 Mm Dia Mtr Pipe Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors. 55 S & F 75 Mm Pvc ( Swr ) Bend Any Redius Complete 56 S & F Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Walls 57 S & F Pvc ( Swr ) Vent Cowl Of 110 Mm Complete 58 S&Fpuff Tank Of 500 Ltrs Capacity, Insulated Cylinderical Vertical Type Double Layer Duly Filled With Glass Wool With Closed Top Hoisted And To Resist In Temperature Between -30 Degree To +35 Degree Celciusfixed In Position With All Fittings Complete All As Specified. 59 M&L For Rcc Septic Tank Designed To Carry Seage And Sullage Water, Excavation In Any Type Of Soil, Pcc 1:4:8 Below Foundation, Rcc M30 Design Mix In Walls, Base Slab, Baffle Walls And Roof Slab Including Beams Etc With Vent Shaft, Manhole Opening With Cover Connection Etc, Complete With Effective Depth Of 1.5 Mtr And Overall Of 3 Mtr For 25 Users Complete 60 Construction Of Soakage Well 3.00M Internal Dia And3.00M Effective Depth Incl Excavation In Any Type Of Soil , Foundation In Pcc 1:3:6 Type C-1 ( Using 20Mm Graded Crushed Stone Aggregates ) , Pcc Block Honeycomb / Solid Masonry In Cement Mortar ( 1:4 ) Rcc M-30 Design Mix Cover Slab Filled With Stone Boulders Including Intersepting Chamber Screen Chamber And Disposal Of Soil Complete All As Specified And Shown On Drawings. 61 M&L Plain Cement Concrete ( 1:3:6 ) Type C-2 ( Using 40Mm Graded Crushed Stone Aggregate ) As In Bed To Drain Pipes Incl Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested For 150Mm Bore Np-3 Pipe, Complete. 62 M&L Reinforced Concrete Pipes, Class Np3 Pipes 150Mm Internal Dia Laid In Trenches On Concrete Bed And Jointed Complete With Collars. ( Excavation, Earthwork And Complete Bed Shall Be Measured Separately. ) 63 M&L Plain Cement Concrete ( 1:2:4 ) Type B-1 ( Using 20Mm Graded Crushed Stone Aggregates ) In Surface Channels And Drains Roundeed Or Chamferred Angles And Throating And Necessary Form Work All As Specified. 64 Providing Precast Cement Concrete ( 1:2:4 ) Type B-1 ( Using 20Mm Graded Crushed Stone Aggregates ) As In Manhole Cover Slabs And Similar Articles Placed In Position And Set In Cm ( 1:6 ) All As Specified. 65 M & L For Pcc 1:2:4 Type B0 As In Seismic And Other Similar Bands, Plinth Courses, Copings, Kneelers, Apex Stones, Bed Plates, All As Directed Including Form Work. 66 M&L Point Wiring With 1.5 Sqmm ( Nominal Area ) Copper Conductor Frls Cable ( Multi-Stranded ) Pvc Insulated And Unsheathed Electric Cable 1100 Volts Drawn Through Pvc Casing And Caping Of Suitable Size ( As Per Conductor Run ) With All Fittings And Accessories And Including Pvc Insulated Unsheathed Electric Cable 1100 Volts 1.5 Sqmm ( Multi-Stranded ) Copper Conductor Single Core ( Green Colour ) As Continuous Earth Wire Connected To Common Earth Dolly Including 50Mm Deep Box Made Out Of 2Nd Class Hard Wood Board Of Suitable Size And Shape And Other Boxes For Mounting Light Fittings Etc Covered With 3Mm Thick Plastic Laminated Hylum Isi Marked For Following Complete All As Specified And Directed By Engr-In-Charge.Note:- Screw Used For Fixing Tw Baords, Casing And Caping Ceiling Rose, Square Blocks Etc Should Be Nickel Cadmium Screws. 67 ( A ) One Light Point Controlled By One 5 Amps One Way Switch 68 ( B ) One 3 Pin Socket Outlet 5 Amps On Independent Board 69 M&L Point Wiring For Power Point With 4.0 Sqmm ( Nominal Area ) Copper Conductor Frls Cable ( Multi-Stranded ) Pvc Insulated And Unsheathed Cable Conductor 1100 Volts Drawn Through Pvc Casing Capping Of Suitable Size ( As Per Conductor Run ) With All Fittings And Accessories And Including Pvc Insulated Unsheathed Electric Cable 1100 Volts 2.5 Sqmm ( Multi-Stranded ) Copper Conductor Single Core ( Green Colour ) As Continuous Earth Wire Connected To Common Earth Dolly Including 50Mm Deep Box Made Out Of 2Nd Class Hard Wood Board Of Suitable Size And Shape And Other Boxes For Mounting Light Fittings Etc Covered With 3Mm Thick Plastic Laminated Hylum Isi Marked For Following Complete All As Specified And Directed By Engr-In-Charge.Note:- Screw Used For Fixing Tw Baords, Casing And Caping Ceiling Rose, Square Blocks Etc Should Be Nickel Cadmium Screws. 70 S & F Switch Piano Flush Button Single Pole One Way 5 Amps, 240 Volts Complete All As Specfied And Directed By Engr-In-Charge. 71 S&F Switch Socket Combination 3 Pin, 5 Amps, 2 In 1 Flush Type ( Multipurpose ) Suitable For 2 Pin / 3 Pin Plug Complete All As Specified And Directed By Engir-In-Chage. 72 S&F Switch Socket Combination 2 In 1, 3 Pin, 5 / 15 Amps, Flush Type ( Multipurpose ) . Complete All As Specified And Directed By Engr-In-Charge. 73 S & F Lamp Holder, Pvc / Polycarbonate Type With Back Plate Suitable For Batten Fittings Complete All As Specified And Directed By Engr-In-Charge. 74 Supply And Fixingrechargeable Ledbulb 9 W, B22 ( 220 -240 V ) 50 Hz 6500K, Fast Charging 2200 Mah Battery Inbuild, White Colour All As Specified And As Directed. Make:- Philips Stellar Bright Or Equivalent. 75 S&F Surface And Wall Mounted Led Batten With Polycarbonate Housing And Integrated Electronic Driver Tube Light Fitting 20W, 4 Ft Long, 220 Volts , And Connecting To Ceiling Rose With Three Core Twisted Flexible Copper Cable Of Suitable Size Complete All As Specified And Directed. 76 S&F Ceiling Rose Surface Backelite Isi Marked With 3 Terminalincluding Connecting And Testing Complete All As Specified And Directed. 77 S&F Mcb Db Sheet Enclosure, Double Door Type, Single Pole And Neutral 240V With 200 Amp Rated Bus Bar Suitable Size Plate And Common Neutral Link All Enclosed In Standard Steel Sheet Flush Mounting Type Factory Fabricated Complete Confirming To Ip 42 / 43 Without Mcb And With Enclosure Blank Plates For Unusedway Suitable For 12 Way Complete All As Specified And Directed. 78 Supply And Fixing 240V, 10 Ka B Curve Miniature Circuit Breaker ( Mcb ) Of Single Poles And Current Carrying Capacity 5 To 32 Amp, In The Mcb Db Complete With Connection Testing And Commissioning All As Specified And Directed. 79 Supply And Fixing Mcb Spn240v, 10Ka C Curve63 Amp Current Carrying Capacity In The Mcb Db Complete With Connection Testing And Commissioning All As Specified And Directed. 80 M&L For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6Mm Thick Burried Directly In Ground Not Less Than 2.25M Deep Below Normal Ground Level ( With The Top Edge Of The Plate Not Less Than 1.50 M Below The Normal Ground Level ) Connected To Gi Earth Wire 4 Mm By Means Of Gi Bolts, Nuts, Check Nuts And Washers Of Gi All As Shown In Electrical Plate No.3 Of Ssr Part-I Connected To Earthing Test Point With And Including Necessary Excavation And Earth Work In Any Strata Pcc Pit 1:3:6 Type C-1, 20Mm Bore Medium Grade Gi Pipe For Watering 15Mm Bore Light Grade Pipe For Gi Wire Protection And Funnel Including 40Mm Thick Rcc Slab Cover And Testing On Completion All As Specified And As Directed. 81 S&F Exhaust Fan 250 Mm Sweep Plastic Type ( Make- Havells Venti Air Dx Or Equivakent ) All As Directed And Specified. 82 M & L For Gipipe ( Medium Grade, Isi Marked ) 32 Mm Dia , 1.5 Mtr Long , Bend To Shape For Street Light Fitting Bracket , With 2X Pairs Of Ms Clamps Of Suitable Length Of Size 40X5 Mm Of Ms Flat Iron With Nuts Bolts And Washer And Taking Out Old One Including Connection With Street Light Complete All Asdirected. 83 Supply And Fixing Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65 / 66 Protection Complete Making All Necessary Connection With Suitable Capacity Of 3 Core Circular Cable Complete All As Specified And Directed. 84 Supply And Fixing Light Fitting 1X10w Bulkhead Luminaires Including Led Light And Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size All As Specified And Directed. 85 Supply, Laying, Fixing, Passing Through Pipe Or Laid In Trenches And Testing Underground Xlpe Insulated Heavy Duty Electric Cable With Aluminium Conductor 1100 Volts Grade Cross Section Area 10 Sqmm 2 Core Complete All As Specified And Directed. 86 Sand Cushioning For Under Ground Cable 8 Cm Before Laying The Cable And 15 Cm After Laying And Streching The Cable Complete All As Specified And Directed By Engineer-In-Charge. 87 M&L Un-Reinforced Precast Factory Made Concreate Cable Covers, Class Lv Type-I, With Flat Size 250X150x40 Mm Complete All As Specified And Directed. 88 Supply And Laying Gi Pipe Medium Grade 40 Mmfixed On Walls / Poles / Laid In Trenches As Cable Protection All As Directed And Specified. 89 Deduct Schedule Of Credit Of Rs ( - ) 0.00 ( Minus ) As Listed In Schedule A Part-Ii. Contract Sum Shall Be Arrived After Deducting The Credit Amount.Note :- Tenderers Will Not Quote Against This Item Being A Firm Amount.

Key Value

Document Fees
INR 500 /-
EMD
INR 45800.0 /-
Tender Value
INR 22.90 Lakhs /-

BOQ Items

Name of Work: Provn of 04 x Toilets and 4 x Bathrooms at Tyakshi under GE Partapur.
Sl. No. Item Description
1Surface dresssing nexc 30cm deep and averaging 15cm deep in hard/dense soil and getting out.
2Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep in hard/dense soil and getting out complete all as specified.
3M&L for Cement concrete Type D-2, 1:4:8 mix using 40mm graded stone aggregate as in foundation/ manholes foundation fillings, mass concrete complete all as specified and directed.
4M&L Precast cement concrete block masonry with solid blocks exc 20 cm in width andset in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).
5M&L for RCC M-30 (Design Mix) (20mm graded aggregates) Foundations,including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete.
6M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Columns,pillars, piers, posts and struts complete all as specified.
7Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm Thk in soft soil.
8Removing excavated materialn.exc 50m and depositing where directed at a level n exc. 1.5m above the starting point
9M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span all as Specified.
10M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Slabssupportedonwalls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,complete all as specified.
11M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work.
12M&L for Formwork to sides of pillars,posts, struts, piers,columns and stanchions for fair finish, complete all as specified and directed.
13M&L for Formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; notexceeding 200mm thick (Horizontal or sloping) for fair finish surface complete all as specified.
14M&L for Formwork to sides and soffits of floor or roof beams, beam haunch-ings, lintels,cantilevers,shelves including sup- ports, overhangs, etc. complete all as specified and directed.
15M&L 15mm thick rendering on fair faces of brick work or concrete surfacesin cement mortar 1:4, finishing the surface fair and even Complete all as specified and directed.
16M&L 10mm thick rendering on fair faces of brick work or concrete surfacesin cement mortar 1:6, finsihed the surfaces even and fairwithout using extra cement.
17M&L 5mm thick rendering on concrete surfacesin cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smoothwithout using extra cement.
18M&L Preparing of new surface of plaster and applying two coats of white wash on wall.
19M&L for Preparing of new plastered surface and applying two coats cement basepaints on walls.
20M&L Preparing of new surface of plaster and applying three coats of white wash on ceiling.
21M & L Plain, solid, straight chowkats and frames 2nd class Hardwood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed comoplete all as specified and as directed.
22S&F35mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail andpanels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.
23M&L preparing new wooden or wood based surfacesof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.
24S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples all as specified & directed by Engineer-in- charge
25M&L 75mm Thk. PCC 1:4:8 type D2 under flooring , using 40mm graded stone aggregates as in sub base complete all as specified and directed.
26M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor complete all as specified and directed.
27M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neatcement slurry and pointed in white or coloured cementwith pigment to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified.
28M&L for coloured glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cementslurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.
29M&L for steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete
30- Ditto as per above itembut6mmto 8mm dia.
31M&L 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound, finished even and fair.
32S&F for butthinges,extrudedaluminium alloy with galvanised mild steel hinge pin, anodised 100mm long all as specified.
33S&F for 150mm aluminium anodised barrel tower bolts of extruded section all as specified.
34S& F for 200mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
35S&F for 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
36M&L for hard core of broken stone of bouders n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true a surface.
37M&L for 75 mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection finished even and smooth , without using extra cement incl necessary form work complete all as.
38S&F Stainless Steel (SS) squatting pan, Orrissa pattern size 580x440mm white with PVC "P" or "S" trap with integral foot rest of any pattern along with wc connector incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.
39S&F wash basin vitreous china white flat black size 550x400mm including bracketscomplete and waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms)
40S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets.
41S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer
42S&F PVC waste pipe 750mm long with cap of 32mm bore dia waste coupling
43S & F PVC connection 600 mm long with two brass coupline.Pipe of 15mm dia of pressure tating 6kgs/Cm2 complete all as specified
44S&F grating doom 100mm dia PT MT weight 25gms
45S&F Brasschromium plated tubular towel rail, 20mm dia between flanges complete all as specified and directed.
46S&F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete, all as specified & directed.
47S&F Stop/angle cock 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed.
48S&F 15mm bore pillar taps cast copper allow with screwed shancks and fixed complete all as specified and as directed.
49S&F 15mm dia bib taps,cast copper alloy with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.
50S&F for PP-R gate valves (brass insert)as per requirement of the size of 20 mm dia complete all as specified and directed.
51M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
52S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.
53S & F PVC (SWR) 110mm dia mtr bends any radius
54S&F PVC (SWR) 75 mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.
55S & F 75 mm PVC (SWR)bend any redius complete
56S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
57S & F PVC (SWR) vent cowl of 110 mm complete
58S&FPuff tank of 500 Ltrs capacity, insulated cylinderical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temperature between -30 degree to +35 degree celciusfixed in position with all fittings complete all as specified.
59M&L for RCC septic tank designed to carry seage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M30 Design Mix in walls, Base Slab, Baffle walls and Roof slab including beams etc with vent shaft, manhole opening with cover connection etc, complete with effective depth of 1.5 mtr and overall of 3 mtr for 25 Users complete
60Construction of soakage well 3.00m internal dia and3.00m effective depth incl excavation in any type of soil , foundation in PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregates ), PCC Block honeycomb/ solid masonry in cement mortar (1:4) RCC M-30 design Mix cover Slab filled with stone boulders including intersepting chamber screen chamber and disposal of soil complete all as specified and shown on drawings.
61M&L Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore NP-3 pipe, complete.
62M&L Reinforced concrete pipes, class NP3 pipes 150mm internal dia laid in trenches on concrete bed and jointed complete with collars. (Excavation, earthwork and complete bed shall be measured separately.)
63M&L Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) in surface channels and drains roundeed or chamferred angles and throating and necessary form work all as specified.
64Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and similar articles placed in position and set in CM (1:6) all as specified.
65M & L for PCC 1:2:4 Type B0 as in seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, all as directed including form work.
66M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
67(a) One light point controlled by one 5 Amps one way switch
68(b) One 3 pin socket outlet 5 Amps on independent board
69M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run)with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
70S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
71S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
72S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
73S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
74Supply and fixingRechargeable LEDBulb 9 W, B22 (220 -240 V) 50 Hz 6500k, fast charging 2200 mAH battery inbuild, white colour all as specified and as directed. Make:- Philips stellar bright or equivalent.
75S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
76S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testing complete all as specified and directed.
77S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 12 way complete all as specified and directed.
78Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
79Supply and fixing MCB SPN240V, 10KA "C" curve63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
80M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
81S&F exhaust fan 250 mm sweep plastic type ( make- Havells venti air DX or equivakent) all as directed and specified.
82M & L for GIPipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all asdirected.
83Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
84Supply and Fixing light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
85Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2 core complete all as specified and directed.
86Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.
87M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.
88Supply and laying GI pipe medium grade 40 mmfixed on walls/ poles/laid in trenches as cable protection all as directed and specified.
89Deduct Schedule of Credit of Rs (-) 0.00 (Minus) as listed in Schedule "A" Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail