Tender For Provision Of Bathroom Cum Toilet Block At Xxx At Zakhama Mil Stn., Zakhama-Nagaland

Tender For Provision Of Bathroom Cum Toilet Block At Xxx At Zakhama Mil Stn.; 1 Surface Dressingn.Exc. 15Cm Deepin Soft / Loose Soil, All As Specified And Directed. 2 Excavating Over Areas, N Exc 1.5 M Deep And Getting Out In Hard / Dense Soil Etc Complete All As Specified And As Directed. 3 All As Per Item No 02 Above But Depth Exc 1.5M But N.Exc 3M As Directed By Complete All As Specified And As Directed.. 4 Excavation In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard / Dense Soil Etc Complete All As Specified And As Directed. 5 Material And Labour For Pcc ( 1:4:8 ) Type D2 ( Using 40 Mm Graded Stone Aggregate ) As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed. 6 Material And Labour For Pcc ( 1:2:4 ) Type B2 ( Using 40 Mm Graded Stone Aggregate ) As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed. 7 Material And Labour Forbrick Work With Sub Class `B` Bricks, Old Size, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar ( 1:6 ) Complete All As Specified And As Directed. 8 Material And Labour Brick Work With Sub Class B Bricks Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built Incm 1:4 Complete All As Specified And Directed. 9 Material And Labour For Rcc M-30 ( Design Mix ) ( Using 20Mm Graded Stone Aggregate ) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed.Note:- Design Mix To Be Got Approved From Accepting Officer Before Incorporation In The Work. 10 Material And Labour For Rcc M-30 ( Design Mix ) ( Using 20Mm Graded Stone Aggregate ) As In Columns, Pillars, Piers, Posts And Struts Concrete Complete All As Specified And As Directed.Note:- Design Mix To Be Got Approved From Accepting Officer Before Incorporation In The Work. 11 Material And Labour For Use And Waste Of Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter With Rough Finished Surfaces Of Concrete, Flat Complete All As Specified And As Directed. 12 Material And Labour For Use And Waste Of Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc With Rough Finished Surfaces Of Concrete Flat Complete All As Specified And As Directed. 13 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length Bent To Shape Required, Including Cranking Bending Spirally For Hooping For Columns , Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.90Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 14 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia, Cut To Length Bent To Shape Required, Including Cranking Bending Spirally For Hooping For Columns , Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.90Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 15 Material And Labour For Mild Steel Tmt Bars 5Mmdia. And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.90Mm Dia Or Securing With Clips Complete All As Specified And Directed. 16 Material And Labour For Rcc M-30 ( Design Mix ) ( Using 20Mm Graded Stone Aggregate ) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And As Directed.Note:- Design Mix To Be Got Approved From Accepting Officer Before Incorporation In The Work. 17 Materials And Labour For 10 Mm Thick Rendering On Other Than Fair Faces Of Brick Work Or Concrete Surface As On Wallin Cement Mortar ( 1:6 ) Andfinished The Surfaces Even And Smooth Without Using Extra Cementcomplete All As Specified And As Directed. 18 Material And Labour For 15Mm Thick Rendering In Cm ( 1:4 ) Onbrick Work Or Concrete Surface As On Wall Mixed With Integral Water Proofing Compound @ 3% By Wt Of Cement, Finished The Surface Even And Fair Complete All As Specified And Directed. ( Note:Water Proofing Compound Shall Be Measured & Paid Separately ) 19 Supply Only Integral Water Proofing Compound ( Wpc ) Of Best Quality ( Isi Marked ) Completeall As Specified And As Directed. 20 Supply And Fix 125X60mm Size Pressed Steel, Frames For Door With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Incl Filling Of Frame With Pcc 1:3:6 Type C-0 ( 12.5Mm Graded Stone Aggregate ) Etc, Complete All As Specified And As Directed. 21 Supply And Fixing For Factory Made 35Mm Thick Second Class Hardwoodplain Framed Panelled Shutters ( Two Panels ) With Lock Rail And Panel Of 9 Mm B.W.P Commercial Ply Or 12 Mm Thick Veenered Particle Boardwith Commercial Veenering On Both Faces. The Size Of Rail And Stiles Shall Be As Per Is: 1003 ( Part-I ) , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. 22 Supply And Fixingaluminium Ventilators, Powder Coated Of Any Colour ( Thickness Of Powder Coating Shall Be Not Less Than 50 Micron ) With Louvers One Or More Rebates Including Jointing Cleats With Necessary Fittings Complete All As Specified And Directed.Note:- Glass For Louvers Shall Be Measured And Paid Separately. 23 Supply And Fixing4.0 Mm Thick Figured Glass, Pin Head And Securing In Wooden / Metal Frameordinary Quality And Glazing With Oil Putty, Glazing Pin Or Beads As Required Etc Insquare Exe 0.50 Sqm In Each Pane Complete All As Specified And Directed. 24 Material And Labour For 100 Mm Thick Plain Cement Concrete Type D-2, 1:4:8 ( Using 40Mm Graded Aggregate ) As In Sub Base Of Floor, Finished The Surface Fair And Even Complete All As Specified. 25 M&L 25Mm Thick Pcc 1:2:4 Type B-0 ( Using 12.5 Mm Graded Stone Aggregate As Indrains / Floor Finishing Even And Rough Including Necessary Formwork Complete All As Specified And Directed. 26 Supply And Fixing For 25Mm Thick Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) In Steps, Jambs, Pillars Window Cills, Cooking Platforms And Like Etc And Fixed Over And Including 15Mm Thick Cement Plasterin Cement Mortar ( 1:6 ) And Pointing With White Cement Mixed With Pigment To Match The Shade Of Granite ( 1:2 ) Using Marble Dust Complete All As Specified And As Directed. 27 Supply And Fixing For 20Mm Thick Udaipur Green Marble Stone ( Table Rubbed And Polished ) In Steps, Jambs, Window Cills, Cooking Platforms And Like Etc And Fixed Over And Including 15Mm Thick Cement Plasterin Cement Mortar ( 1:6 ) And Pointing With White Cement Mixed With Pigment To Match The Shade Of Granite ( 1:2 ) Using Marble Dust Complete All As Specified And As Directed. 28 Material And Labour For Non - Skid Coloured Ceramic Tiles ( No. 1 Quality / Premium Quality ) 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Includingscreed Bed Or Bedding Layer Of Mortar 15 Mm Thick For Laying Floor Finishes In Cement Mortar 1:4 Complete All As Specified And As Directed. 29 Material And Labour For Cloured Glazed Ceramic Tiles ( No. 1 Quality / Premium Quality ) In Vertical Surface450x 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Including 10Mm Thick Cement Plaster In Cm ( 1:4 ) Complete All As Specified And As Directed. 30 Materials And Labour For Preparation Of New Plasteredsurfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Chalk Whitening Primer Complete All As Specified And As Directed. 31 Materials And Labour For Preparation Of New Plasteredsurfaces Of Walls And Applying Two Coats Of Cement Base Paint Over A Coat Of Alkali Resistant Primer Complete All As Specified And As Directed. 32 Material And Labour For Broken Stone Hardcore Of Gauge N.Exc 63Mm, Deposited, Spread And Levelled In Layers N.Exc 15Cm Thick, Watered And Rammmed To A True Surface Complete All As Specified And As Directed. 33 Material & Labour For 75Mm Thick, Pcc 1:3:6, Type C-1, Using 20Mm Graded Aggregate As In Plinth Protection Etc Surface Finished Even And Smooth Without Using Extra Cement And Providing Necessary Joints 12Mm Wide To The Full Depth Of Pcc At Every 3 Meters And Every Change Of Directions And The Joints Duly Filled With Mastic Filling Comprising Of 01 Part Of Heated Bitumen Blown Grade Any Penetration And 3 Parts Of Sand [ All By Weight ] Complete All As Specified And As Directed. 34 Material And Labour For Rolled Mild Steel For Roof Trusses ( Framed ) , Trussed, Purlins, Crane Grantries, Rails And Fastenings And Heavy Bracket Framing ( Beam, Tee, Angle, Channel Or Flat Sections ) Including Distance Pieces, Cleats Etc. Conforming To Fe 410-W ( Gde-E-250 ) Quality-A Complete All As Specified And Directed. 35 Supply And Fixing 0.50Mm Thick Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated / Semi Corrugated Steel Sheet Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Per Manufacturer Instruction Complete All As Specified And As Directed. 36 Supply And Fixing 0.50Mm Thick Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Per Manufacturer Instruction Complete All As Specified And As Directed. 37 Material And Labour For Preparation Of New Steel Surfaces To Receive Painting Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primercomplete All As Specified And Directed. 38 Supply And Fix Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube Complete All As Specified And As Directed. 39 Supply And Fixfactory Made Solid Panel Pvc Door Shutter 30Mm Thick ( Style ) Consisting Of Frame Made Out Of Ms Tubes For Top Andbottom Rails. Ms Frame Shall Be Covered With Heat Moulded Decorative Coloured Laminates Pvc `C` Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Decorative Coloured Laminates Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail Or Bottom Rail ; Panelling Of Decorative Coloured Laminates Pvc Sheet To Be Fittedin The Ms Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Laminated Sheet Beeding, And Joined Together With Solvent Cement, Supplying And Fixing In The Frame At The Site As Per Specificationcomplete All As Specified And As Directed. 40 Supply And Fixing Aluminium Anodized, Barrel Tower Bolts, 100Mm Long And 10Mm Dia Of Extruded Section Complete All As Specified And As Directed. 41 Supply And Fixing Aluminium Anodized, Barrel Tower Bolts, 150Mm Long And 10Mm Dia Of Extruded Section Complete All As Specified And As Directed. 42 Supply And Fixing 300Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed Complete All As Specified And As Directed. 43 Supply And Fixing 100Mm Size Mild Steel Butt Hinges Medium Weight, Fixed Type B-21, Cold Rolled Complete All As Specified And As Directed. 44 Supply And Fixing Extruded Aluminium Alloy Handles, Fabricated Type, Anodised 150Mm Size Complete All As Specified And As Directed. 45 Supply And Fixing Steel Ventilator With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And As Directed. 46 Supply And Fixing Vitreous China Squatting Pan Of‘Orissa Pattern’, Size 580 Mm X 440Mm ( White ) With ‘P’ Or ‘S’ Trap, Front Or Back Inlet And Foot Rests, Any Pattern Complete Including Provision Of Pcc Bedding Andconnection To Trap, Flushing Pipe, Antisyphonage Pipe, Etc. Including Making Good The Disturbed Floor Complete All As Specified And As Directed. 47 Supply And Fixing 10 Litre Capacity Low Level Pvc Flushing Cistern ( Any Colour ) , Syphonic Action Type, With Inlet, Ball Valve, Float, Handle, Fixed With Cast Iron Bracket ( Of Suitable Size ) And Providing 32 Mm Dia Pvc Flush Pipe And Making All Necessary Connections Complete All As Specified And As Directed By Engineer-In-Charge. 48 Supply And Fixingvitreous China Bowl Pattern Urinal, Flat Back Of Size 430 X 370 X 340 Mm White ( Minimum ) , With Grating And Union For Discharge Pipe And 32Mm Dia Pvc Flush Pipe And Waste Pipe ) Including Connections To Flushing Pipe And Outgoing Pipes Complete All As Specified And As Directed. 49 Supply And Fixing Asforvitreoues China Whb, White, Flat Back, Of Size 580X450mm Including Cp Brackets, Cp Waste Coupling 32 Mm Bore, Pvc Waste Pipe 32Mm Diacomplete All As Specified And As Directed. 50 S&F In Repair 100 Mm Dia Cast Ironfloor Trapoutlet With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete 1:2:4 Type B1 ( Using 20 Mm Graded Stone Aggregate ) And Making Good The Disturbed Surfaces To Match With Existing Complete All As Specified And Directed. 51 Supply And Fixing Towel Rail Of Ptmt 600Mm Long Fixed With And Including Chromium Platedbrass Screws And Wooden / Plastic Cleat ( Minimum Weight 190Gms ) Complete All As Specified And As Directed. 52 Supply And Fixing Pvc Connecting Pipe 15Mm Dia 600Mm Long With Ptmt Check Nuts And Washer On Both Ends Complete All As Specified And As Directed. 53 Supply And Fixing 100 Mm Dia Grating Doom With Waste Hole Of Ptmt ( Minimum Weight 25Gms ) Complete All As Specified And As Directed. 54 Supply And Fixing 125 Mm Dia Grating Doom With Waste Hole Of Ptmt ( Minimum Weight 40 Gm ) Complete All As Specified And As Directed. 55 Supply And Fixing Liquid Soap Container Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden / Plastic Cleats. ( Minimum Weight 105Gms ) Complete All As Specified And As Directed. 56 Supply And Fix Soap Dish, Vitreous China White, Approx Size 160Mm X 160Mm X 90Mm , Fixed To Wall With Plugs And Cp Brass Screwscomplete All As Specified And Directed. 57 Supply And Fixingsheet Glass Assembly Consisting 5.50 Mm Thick Sheet Glass Shelf 12 Cm Wide With Chromium Plated Bracket Guard And Railing 600 Mm Long Complete All As Specified And As Directed. 58 Material And Labour Looking Mirror Ofsize 600Mm X 450Mm X 5Mm Thick Bevelled Edge Of Selected Quality Glass, Decorative Type Mounted On 6Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Completeall As Specified And As Directed. 59 Supply And Fixing 15Mm Bore Stop Valve, Cast Copper Alloy, Screwed Down High Pressure, With Crutch Or Butterfly Handle Screwed Both Ends Fixedto Gi Pipe Complete All As Specified And As Directed By The Engr-In-Charge. 60 Supply And Fixing 15Mmbore Bib Tapscastcopper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe For Brass Ferrule And Fixed Complete All As Specified And As Directed. 61 Supply And Fixing 15Mm Bore Chromium Plated, Pillar Tap Fancy Typecast Copper Alloy, With Capstan Heads Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe Complete All As Specified And As Directed By The Engr-In-Charge. 62 Supply, Hoisting And Fixing In Proper Position Isi Marked Three-Layer Rotational Moulded Polyethylene Water Storage Tank ( Cylindrical Vertical With Closed Top ) , Of Capacity 1000 Litres With And Including 20Mm Bore Ptmt Float And Ball Valve Set Including Providing Necessary Connectionscomplete All As Specified And As Directed . 63 Supply And Fixing 20Mm Bore Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed By The Engr-In-Charge. 64 Supply & Fixing 110 Mm Bore Dia Pvc ( Swr ) Pipes Single Socketed, In Any Length With Rubber Ring Loints, Fixed To Walls Complete All As Specified And Directed. 65 Supply And Fixing 15Mm Bore Galvanised Steel Water Tubing Medium Grade Including All Fittings And Fixed Complete To Walls / Ceiling Or Laid Under Floors Complete All As Specified And As Direcetd. 66 Supply And Fixing 20Mm Bore Galvanised Steel Water Tubing Medium Grade Including All Fittings And Fixed Complete To Walls / Ceiling Or Laid Under Floors Complete All As Specified And As Direcetd. 67 Supply And Fixing 110 Mm Bore Pvc ( Swr ) Bendsin Any Radius Complete All As Specified And Directed. 68 Supply And Fixing 110 Mm Bore Pvc ( Swr ) Bends With Access Door In Any Types Complete All As Specified And Directed. 69 Supply & Fixing 110 Mm Bore Pvc [ Swr ] Junction Double [ Double T ] Equal Or Unequal Including Jointing With Solvent Cement Complete All As Specified And As Directed. 70 Supply & Fixing 110Mm Bore Pvc [ Swr ] Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or Infloors Complete All As Specified And As Directed. 71 Supply And Fixing 110 Mm Bore Pvc ( Swr ) Vent Cowl In Any Types Complete All As Specified And Directed. 72 Returning, Filling In, Of Soft / Loose Soil Including Spreading Leveling, Watering And Well Ramming In Layers Not Exceeding 25 Cm Complete All As Specified And As Directed 73 Removing Excavated Soil To A Distance N.Exc 50M And Deposited / Spreaded Where Directed At A Level N. Exc 1.5 M Above The Starting Point Completeall As Specified And As Directed. 74 Material And Labour For Rcc M-30 ( Design Mix ) ( Using 20Mm Graded Stone Aggregate ) As In Slabs Supported On Wall / Beams / Columns In Floors / Roofs / Shelves And The Likecomplete All As Specified And As Directed. Note:- Design Mix To Be Got Approved From Accepting Officer Before Incorporation In The Work. 75 Material And Labour For Use And Waste Of Form Work To Soffits Of Suspended Slab Such As Roof Slabs, Floor Slabs, Landing And Similar Work, Etc. Not Exceeding 200Mm Thick With Rough Finished Surfaces Of Concrete Flat Complete All As Specified And As Directed. 76 Material And Labour For Use And Waste Of Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N Exc 10Cm Wide And Sides Of Rcc / Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 5Cm But N Exc 10Cm Wide With Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed. 77 Materials And Labour For Preparation Of Newly Plastered Surfaces Of Wall And Applying Three Coats Of White Wash Complete All As Specified And As Directed. 78 Materials And Labour For Rendering 15Mm Thick Plaster In Cement Mortar ( 1:4 ) On Brick / Stone Masonry Surfaces And Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 79 Materials And Labour For 15 Mm Thick Rendering On Brick Or Concrete Surface In Cement Mortar ( 1:3 ) Andfinished The Surfaces Even And Smooth With Using Extra Cementcomplete All As Specified And As Directed. 80 Material And Labour For 100 Mm Thick Pcc 1:2:4 Type B1 ( Using 20 Mm Graded Stone Aggregate ) As In Floor, Finished The Surface Even And Fair Without Using Extra Cementcomplete All As Specified And Directed. 81 Material And Labour For Precast Cement Concrete 1:2:4 Type B1 ( Using 20 Mm Graded Stone Aggregate As In Cover Slab For Manholes, Drains Etc, Set In Cement Mortar 1:6 Including Necessary Formwork Complete All As Specified And Directed. 82 Supply And Fixing 100 Mm Bore Stack Clamps Out Of 50Mm By 5Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall Or Roof Fornominal Bore Complete All As Specified And Directed. 83 Material And Labour Pcc 1:4:8 Type D-2 ( Using 40Mm Graded Aggregate ) As In Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of Pipes After They Are Laid And Tested For 100Mm Dia Pipe Complete All As Specified And Directed. 84 Materials And Labour For Pcc 1:2:4 Type B1 ( Using 20 Mm Graded Stone Aggregate ) As In Coping Including Necessary Formworkcomplete All As Specified And As Directed. 85 Supply , Install , Testing And Commissioning Of Electric Storage Water Heater Of Cap 50 Ltr Vertical Type, 5 Star Rating Complete Including Grouting / Screwing To Brick Wall / Wooden Frame For Fixing Arrengement Of Geyser And Making Good Disturbed Surface Of Wall Complete All As Specified And As Directed.Note:-Geysers Shall Be Standard Make Isi Marked / Bee-5 Star Rated, Vertical Type And Installed With The Following:- ( A ) Plug & Socket ( B ) Vent Pipe ( C ) Fusible Plug ( D ) Pressure Reducing Valve In Case Of Multi Stories Bldg ( E ) Safety Valve ( F ) Proper Earth Connection. 86 Material And Labour For Point Wiring ( Surface Type ) For One Light / Fan / Call Bell Point With 1.5 Sqmmpvc Insulated ( Fr-Lsh ) Unsheathed Copper Cable Multistranded Conductor 1100 Volts Gradecontrolled By One Way Switchincluding 1.5 Sqmm Pvc ( Fr-Lsh ) Insulated Unsheathed Copper Cable Multistrand Conductor 1100 Volts Grade For Continuity Earth Wire Connected To Common Earth Dolly Drawn Through And Including Pvc Casing Caping Of Suitable Size With All Accessoriesand Pvc Rectangular Boxes For Mounting Switch, Socket And Fan Regulator Etc Complete All As Specified And As Directed. Note: ( I ) Wiring Shall Be Done In Proper Colour Coding Using Red , Yellow, Blue For Phase, Black For Neutral And Green For Earth. ( Ii ) The Cost Of Making Good The Disturbed Surfaces Is Deemed To Be Included In The Quoted Rate. 87 All As Per Item No 86 Above But 15 Amp Switch Socket Combination By Using 2.5 Sqmm Copper Cable With 2.5 Sqmm Earthing Wire Complete All As Specified And Directed. 88 All As Per Item No 86 Above But For 3 Pin, 5 Amp Switch Socket Outlet On Independent Board Complete All As Specified And Directed. 89 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb 10Amps And Complete All As Specified And Directed. 90 Supply & Fixing Switch Socket Combination 2 In 1, 5 Pin, 5 And 15 Amp Flush Type Universal Controlled By One Switch Flush Type Complete All As Specified And Directed. 91 Supply & Fixing Switch Socket Combination 2 In 1, 3 Pin, 5 Amp Flush Type Universal Controlled By One Switch Flush Type Complete All As Specified And Directed. 92 Supply And Fixing Ceiling Rose, Pvc / Polycarbonate, Isolated Body Surface Bakelite, 65Mm X 25Mm, Isi Marked Three Terminals Complete All As Specified And Directed. 93 Supply & Fixing Switch Piano Flush Type ( Isi Marked ) , Single Pole, One Way 5 Amp, 240 Volts Complete All As Specified And Directed. 94 Supply And Fixingfor Lamp Holder Pvc / Polycarbonate Type, Insulated Body With Back Plate Batten / Angle Type For Batten Batten Fittings Complete All As Specified And As Directed. 95 Supply & Fixing Lamp 9 Watt, Cool / Warm While And Complete All Angle Type, Pvc / Polycarbonate Type With Back Plate Suitable For Batten Fitting, Complete All As Specified And As Directed. 96 Supply And Fixing Led Lights Fitting 1X 20W, 220V, With Necessary Fitting And Fixtures Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed.Note:-Light Fitting Shall Be Of Pf>0.95. 97 Supply And Fixing Security Light / Street Light, New Generation Energy Saving And Environmental Friendly Long Life Led Street Light 20 Watt Made Up Of Pressure Die Cast Aluminium Housing With High Efficient Led As Lighting Source And Pc Cover Having Top Opening Seperate Driver Compartment With Ip66 Protection And Impact Resistance Of Ik07, Amblent Temp-35 Degree Centegrate.Operating Temp -10 Degree Centegrate To 50 Degree Centegrate, Operating Voltage Range 140V-270V, Including Mounting Bracket Etc And Complete All As Specified And Directed. Note:-Light Fitting Shall Be Of Pf>0.95. 98 Supply And Fixing Pvc Rectangular Block Size 250X150x50mm Depth 3 Mm Thick Complete All As Specified And Directed. 99 Supply & Fixing Mcb Db, Spn, 8 Way, 240 Volts, With Din Channel, Double Door With 200 Amps Rated Bus Bar Suitable For Mounting Mcbs Flush Mounted With Wallcomplete All As Specified And As Directed. 100 Supply And Fixing Mcb 32 Amps, Spn, 240V, 10Ka, C Curve Complete All As Specified And As Directed. 101 Supply And Fixing Mcb 6 To 32 Amps, Sp, 240V, 10Ka, C Curve Complete All As Specified And As Directed.Note:For Serial Item No 99 To 101: Mcb And Mcb Db Shall Be Of Same Make As Approved By Age ( I ) . 102 Supply And Fixing 1100 Volts Grade Heavy Dutytwin Core 10 Sqmm Cable Pvc Insulated Aluminium Stranded Conductor, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Metre Apart Including 4Mm Suspension Wire Complete All As Specified And As Directed. 103 Material And Labour For House Service Bracket ( Hook Type Complete With 3.0M Long G.I. Pipe 40Mm Dia Medium Grade, Two Nos. 90 Degree Bends, M.S. Hook And Stay Or Guy Complete All As Specified And As Directed. 104 Supply And Fixing Rcbo -A Type ( Spn-2M ) In Accordance With Is 12640-2 & Ies 61009-1 ) 240V / 415V, 50Hz, 30Ma, 10 Ka For Earth Leakage Overload Protection And Short Circuit Capacity Of Rating 20 / 25 Amps Including Enclosures Complete All As Specified And As Directed. 105 Supply And Fixing 10W Mirror Led Light, Led Batten And Aluminium Housing, 240V Complete All As Specified And As Directed.Note:-Light Fitting Shall Be Of Pf>0.95. 106 Supply And Fixing Heavy Duty Pvc Exhaust Fan, Oscillating 300Mm Sweep, 1400 Rpm, Opreates In 220V, Single Phase, 50Hz And All Accessories Fixed To Wall / Wooden Surface And Making Good Disturbed Surface As Existing Matching To Wall / Wooden Surface Including Testing Etc And Complete All As Specified And As Directed. 107 Materials And Labour For Earthing Complete With Galvanised Iron Earth Plate Electrode 600 Mm X 600 Mm X 6 Mm Thick, Burried Directly And Preferably Vertically In Ground, Earth Pit Not Less Than 2.25 Mtr Deep Below Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Ground Level Connetced With Galvanised Wire Of 4Mm Diaby Means Of Nuts, Bolts, Check Nuts And Washers Made Of Galvanised Iron Or Steel Earthing Lead To Be Protected By Galvanised Iron Pipe Of 15Mm Bore ( Light Grade ) And Other End Connected To Earthing Test Point Or Lightening Arrestor Or Main Controlling Switch As Directed Including Providing Funnel With 20Mm Bore Galvanised Iron Pipe ( Medium Grade ) , Wire Mesh, Charcoal Or Coke And Common Salt In Alternate Layer Of 15Cm ( Compacted Thickness ) All Round The Earth Electrode, Concrete Earth Pit In Pcc ( 1:3:6 ) Type C-1 ( With 20Mm Graded Aggregate ) , 50Mm Thick Precast Rcc ( 1:2:4 ) Cover Slab ( Re-Inforced With 8Mm Dia Tmt Bar @ 15 Cm C / C Bothways And Suitable Handle Made Of 10Mm Dia ) Including Necessary Earth Work In Excavation, Returning Filling And Removal Of Surplus Earth Upto A Distance Not Exceeding 50 M Etc All As Shown On Electrical Plate No. 3 Of Mes Schedule Part-I ( 2009 ) Complete Including Testing On Completionall As Specified And As Directed.Notes:- ( I ) Main Earthing Strip From Earth Plate Electrode To Rest Point Upto Length Of 7.5 Meters Length Shall Deemed To Be Included In The Unit Rate Quoted Against This Item. ( Ii ) On Testing After Completion If The Desired Resistenance Is Not Obtained The Contractor Shall Redo The Earthing Without Any Extra Cost To The Department.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	12-Dec-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	19-12-2023
2	19-Dec-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	25-12-2023

INR 500 /-

INR 45000.0 /-

INR 22.50 Lakhs /-

Name of Work: PROVN OF BATHROOM CUM TOILET BLOCK AT XXX AT ZAKHAMA MIL STN.

Sl. No.	Item Description
1	Surface dressingn.exc. 15cm deepin soft / loose soil, all as specified and directed.
2	Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil etc complete all as specified and as directed.
3	All as per item No 02 above but depth exc 1.5m but n.exc 3m as directed by complete all as specified and as directed..
4	Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and as directed.
5	Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
6	Material and labour for PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
7	Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
8	Material and labour Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built incm 1:4 complete all as specified and directed.
9	Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
10	Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
11	Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed.
12	Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed.
13	Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
14	Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
15	Material and labour for Mild steel TMT bars 5mmdia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
16	Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
17	Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wallin cement mortar (1:6) andfinished the surfaces even and smooth without using extra cementcomplete all as specified and as directed.
18	Material and labour for 15mm thick rendering in CM (1:4) onbrick work or concrete surface as on wall mixed with integral water proofing compound @ 3% by wt of cement,finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
19	Supply only integral water proofing compound (WPC) of best quality (ISI marked) completeall as specified and as directed.
20	Supply and fix 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate,incl filling of frame with PCC 1:3:6 type C-0(12.5mm graded stone aggregate) etc, complete all as specified and as directed.
21	Supply and fixing for factory made 35mm thick second class hardwoodplain framed panelled shutters (two panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veenered particle boardwith commercial veenering on both faces. The size of rail and stiles shall be as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
22	Supply and fixingaluminium ventilators, powder coated of any colour (thickness of powder coating shall be not less than 50 micron) with louvers one or more rebates including jointing cleats with necessary fittings complete all as specified and directed. Note:- Glass for louvers shall be measured and paid separately.
23	Supply and fixing4.0 mm thick figured glass,pin head and securing in wooden / metal frameordinary quality and glazing with oil putty, glazing pin or beads as required etc insquare exe 0.50 Sqm in each pane complete all as specified and directed.
24	Material and labour for 100 mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor, finished the surface fair and even complete all as specified.
25	M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate as indrains/floor finishing even and rough including necessary formwork complete all as specified and directed.
26	Supply and fixing for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plasterin cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed.
27	Supply and fixing for 20mm thick Udaipur green marble stone(table rubbed and polished) in steps, jambs, window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plasterin cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed.
28	Material and labour for Non - skid coloured Ceramic tiles (No. 1 quality / Premium quality) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includingScreed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar 1:4 complete all as specified and as directed.
29	Material and labour for cloured glazed ceramic tiles (No. 1 quality / Premium quality) in vertical surface450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4) complete all as specified and as directed.
30	Materials and labour for preparation of new plasteredsurfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed.
31	Materials and labour for preparation of new plasteredsurfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
32	Material and labour for broken stone hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.
33	Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
34	Material and labour for rolled mild steel for roof trusses ( framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
35	Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
36	Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
37	Material and labour for preparation of new steel surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and directed.
38	Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
39	Supply and fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top andbottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fittedin the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specificationcomplete all as specified and as directed.
40	Supply and fixing aluminium anodized, barrel tower bolts, 100mm long and 10mm dia of extruded section complete all as specified and as directed.
41	Supply and fixing aluminium anodized, barrel tower bolts, 150mm long and 10mm dia of extruded section complete all as specified and as directed.
42	Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
43	Supply and fixing 100mm size mild steel butt hinges medium weight,fixed type B-21, cold rolled complete all as specified and as directed.
44	Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.
45	Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
46	Supply and fixing Vitreous China squatting pan of‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding andconnection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
47	Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.
48	Supply and fixingvitreous china bowl pattern urinal, flat back of size 430 x 370 x 340 mm white (minimum), with grating and union for discharge pipe and 32mm dia PVC flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and as directed.
49	Supply and fixing asforvitreoues china WHB, white, flat back, of size 580X450mm including CP brackets, CP waste coupling 32 mm bore, PVC waste pipe 32mm diacomplete all as specified and as directed.
50	S&F in repair 100 mm dia cast ironfloor trapoutlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) and making good the disturbed surfaces to match with existing complete all as specified and directed.
51	Supply and fixing towel rail of PTMT 600mm long fixed with and including Chromium platedbrass screws and wooden/plastic cleat (minimum weight 190gms) complete all as specified and as directed.
52	Supply and fixing PVC connecting pipe 15mm dia 600mm long with PTMT check nuts and washer on both ends complete all as specified and as directed.
53	Supply and fixing 100 mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed.
54	Supply and fixing 125 mm dia grating doom with waste hole of PTMT (minimum weight 40 gm) complete all as specified and as directed.
55	Supply and fixing Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and as directed.
56	Supply and fix soap dish, vitreous china white, approx size 160mm x 160mm x 90mm , fixed to wall with plugs and CP brass screwscomplete all as specified and directed.
57	Supply and fixingsheet glass assembly consisting 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified and as directed.
58	Material and labour looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed.
59	Supply and fixing 15mm bore stop valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends fixedto GI pipe complete all as specified and as directed by the Engr-in-Charge.
60	Supply and fixing 15mmbore bib tapscastcopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule and fixed complete all as specified and as directed.
61	Supply and fixing 15mm bore Chromium Plated,pillar tap fancy typecast copper alloy, with capstan heads screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engr-in-Charge.
62	Supply, hoisting and fixing in proper position ISI marked Three-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore PTMT float and ball valve set including providing necessary connectionscomplete all as specified and as directed .
63	Supply and fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge.
64	Supply & fixing 110 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.
65	Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
66	Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
67	Supply and fixing 110 mm bore PVC (SWR) bendsin any radius complete all as specified and directed.
68	Supply and fixing 110 mm bore PVC (SWR) bends with access door in any types complete all as specified and directed.
69	Supply & fixing 110 mm bore PVC [SWR] Junction double [double "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
70	Supply & fixing 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or infloors complete all as specified and as directed.
71	Supply and fixing 110 mm bore PVC (SWR)vent cowl in any types complete all as specified and directed.
72	Returning, filling in, of soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
73	Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point completeall as specified and as directed.
74	Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on wall / beams / columns in floors / roofs/ shelves and the likecomplete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
75	Material and labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed.
76	Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete complete all as specified and as directed.
77	Materials and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
78	Materials and labour for rendering 15mm thick plaster in cement mortar (1:4)on brick/stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.
79	Materials and labour for 15 mm thick rendering on brick or concrete surface in cement mortar (1:3) andfinished the surfaces even and smooth with using extra cementcomplete all as specified and as directed.
80	Material and labour for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor, finished the surface even and fair without using extra cementcomplete all as specified and directed.
81	Material and labour for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as in cover slab for manholes, drains etc, set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
82	Supply and fixing 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof fornominal bore complete all as specified and directed.
83	Material and labour PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100mm dia pipe complete all as specified and directed.
84	Materials and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including necessary formworkcomplete all as specified and as directed.
85	Supply ,install ,testing and commissioning of electric storage water heater of cap 50 ltr vertical type, 5 star rating complete including grouting/screwing to brick wall/wooden frame for fixing arrengement of geyser and making good disturbed surface of wall complete all as specified and as directed. Note:-Geysers shall be standard make ISI marked/BEE-5 star rated,vertical type and installed with the following:- (a) Plug & socket(b) vent pipe (c) Fusible plug (d) Pressure reducing valve in case of multi stories Bldg (e) Safety valve(f) Proper earth connection.
86	Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessoriesand PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
87	All as per item No 86 above but 15 Amp switch Socket combination by using 2.5 sqmm copper cable with 2.5 sqmm earthing wire complete all as specified and directed.
88	All as per item No 86 above but for 3 pin,5 Amp switch Socket outlet on independent board complete all as specified and directed.
89	Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10Amps and complete all as specified and directed.
90	Supply & fixing Switch socket combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
91	Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
92	Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm,ISI marked three terminals complete all as specified and directed.
93	Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed.
94	Supply and fixingfor lamp holder PVC / Polycarbonate type, insulated body with back plate batten / angle type for batten batten fittings complete all as specified and as directed.
95	Supply & fixing lamp 9 watt,cool/warm while and complete all angle type,PVC/Polycarbonate type with back plate suitable for batten fitting,complete all as specified and as directed.
96	Supply and fixing LED lights fitting 1x 20W, 220V,with necessary fitting and fixtures including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
97	Supply and fixing Security light/street light, new generation energy saving and environmental friendly long life LED street light 20 watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07, Amblent temp-35 degree centegrate.Operating temp -10 degree centegrate to 50 degree centegrate,Operating voltage range 140V-270V, including mounting bracket etc and complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
98	Supply and fixing PVC rectangular block size 250X150X50mm depth 3 mm thick complete all as specified and directed.
99	Supply & Fixing MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed.
100	Supply and fixing MCB 32 Amps, SPN, 240V, 10KA, "C" curve complete all as specified and as directed.
101	Supply and fixing MCB 6 to 32 Amps, SP, 240V, 10KA, "C" curve complete all as specified and as directed. Note:for serial Item No 99 to 101: MCB and MCB DB shall be of same make as approved by AGE (I).
102	Supply and fixing 1100 volts grade heavy dutytwin core 10 sqmm cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire complete all as specified and as directed.
103	Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy complete all as specified and as directed.
104	Supply and fixing RCBO -A type (SPN-2M) in accordance with IS 12640-2 & IES 61009-1) 240V /415V,50Hz, 30mA,10 KA for earth leakage overload protection and short circuit capacity of rating 20/25 Amps including enclosures complete all as specified and as directed.
105	Supply and fixing 10W mirror LED light,LED batten and aluminium housing, 240V complete all as specified and as directed. Note:-Light fitting shall be of PF>0.95.
106	Supply and fixing heavy duty PVC exhaust fan, oscillating 300mm sweep, 1400 RPM, opreates in 220V, single phase, 50Hz and all accessories fixed to wall/wooden surface and making good disturbed surface as existing matching to wall/wooden surface including testing etc and complete all as specified and as directed.
107	Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completionall as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.