Tender For Providing Plumbing Main With Supply And Delivery Of 30 Hp Motor From Periyakulam Well In Surandai Municipality
Tender Value
19 Lakhs
Estimated cost
Bid Submission
29 Nov 2023
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
surandai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Plumbing Main With Supply And Delivery Of 30 Hp Motor From Periyakulam Well In Surandai Municipality
BOQ
| Sl. No. | Item Description |
| 1 | WATER SUPPLY |
| 2 | OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 OPENWELLSUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 WITHOUT PANEL BOARD Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. LPM 1500 X 80M |
| 3 | FULLY AUTOMATIC AIR BREAK STAR DELTA STARTER WITH SINGLE PHASE PREVENTOR WITH AMMETER CONFIRMING TO IS 13947, IEC 60947-1 WITH AUTO RESTART FACILITY FOR PUMP HOUSES WHERE PANEL BOARDS ARE AVAILABLE Supply and delivery of Star-Delta starter where panel boards are available confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/three Phase/50HZ(+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature Circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). 30 KW Rating with 40hp |
| 4 | PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE of 65 Qmm CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER of 6 sqmm |
| 5 | G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 150mm dia |
| 6 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 7 | Labour charges for cable laying For laying in trenches inside the pump room or in air |
| 8 | 2T capacity hand operated over head Travelling(HOT) crane suitable for a span upto 6 Mtrs, andtravel length upto 10 Mtrs.with clear lift upto 6 Mtrincluding gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including girder |
| 9 | DI Non Return Valve |
| 10 | Kinetic Air Valve |
| 11 | GI Elbow |
| 12 | GI Flange |
| 13 | Welding Of GI Pipe |
| 14 | MS Bolt &Nut |
| 15 | CID Joint (Class 15) |
| 16 | Supply of MS Specials |
AI Tender Summary
Tender Timeline
Nov 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender