}

Tender For Construction Of Daily Market (Meat And Fish Stall), mettupalayam-Tamil Nadu

Municipal Adminitration And Water Supply Department has published Tender For Construction Of Daily Market (Meat And Fish Stall). Submission Date for this Tender is 06-12-2023. Paver Blocking Tenders in mettupalayam Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

40828943
Tender For Construction Of Daily Market (Meat And Fish Stall)
Open Tender
NCB
Tamil Nadu
Mettupalayam
06-12-2023

Tender Details

Tender For Construction Of Daily Market ( Meat And Fish Stall ) ; 1 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand, Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrockrequiring Blasting Inclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete 10 Cum ( Data ) 2 Foundation 3 Plinth Beam 4 Supplying And Filling In Foundation Andbasement With Filling M-Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. Data 5 Refilling With Excavated Earth In Layers Of 30 Cm Watered Well Rammed And Consolidatred Conforming To Standard Specification Including Labour Charges As Directed By Engineer In Charge 6 Plastering With Cement Mortar 1:4 ( One Cement And Four Sand ) 20 Mm Thick Mixed With Best Approved Quality Water Proofing Compound Conforming To Indian Standard Specification As Specified By The Departmental Officers At 2% By Weight Of Cement Used And Finishing, Curing Etc. Complete Complying With Standard Specification. 7 Supplying And Providing Anti Termite Pre Construction Treatment Using Aldrin Or Dealdrin Or Heptochlor As Per Relavent Is 6313 ( Part Ii ) Code Including Cost Of All Materials, Labour, Hore Charges For T&P Etc Complete. 8 Plain Cement Concrete 1:4:8 ( One Cement Four Fine Aggregates And Eight Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 9 Supplying And Filling The Basement With Good Earth Filling In Layers Of Not More Than 15Cmthick Well Rammed Watered And Compacted - Etc., Complete Complying With Standard Specification. 10 Plain Cement Concrete 1:2:4 ( One Cement, Two Fine Aggregates And Four Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Chargesetc., Complete As Per Standard Specification 11 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 12 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specificaiton. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 13 For Plane Surfaces Such As Rcc Floor Slab, Roof Slab, Beams, Lintels, Bed Blocks, Landing Slab, Waist Slab, Portico Slabs And Beams, Etc 14 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 15 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Crushed Stone Sand ( M- Sand ) , But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - 16 Foundation 17 Ground Floor 18 M-25 Concrete - Providing And Laying In Position, Standarised Design Mix M-25 Grade Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of 350Kg / M3 And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5.70 Cu.M. ) 940.50Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 2.80 Cu.M. ) 462.00Kg Of 10-12Mm Machine Crushed Jelly And With About ( 4.25 Cu.M. ) 701.25Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Neccessary Without Clambing Extra, Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requierments Of Is 383-2016. ( No Separate Payment Will Be Made By The Department For The Exces Usage Of Materials As Per Design Mix. ) ( Si No 81 ) 19 Foundation 20 Ground Floor 21 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. 22 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification. 23 Ground Floor 24 Plastering With Cement Mortar 1:3, 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 25 Plastering With Cement Mortar ( 1:5 ) 12Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 26 Painting Two Coats With Ready Mixed Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. - 10 Sq.M 27 Painting Two Coats With Ready Mixed Enamel Paint Over The New Iron Works Of Approved Quality And Colour Without Priming Coatincluding The Cost All Materials Etc., Complete, In All Floors. 28 Paving The Floor With Design Rajasthankotta Tiles ( Colour And Shade As Directed ) Of Size 610 Mm X 610Mm X 20Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement Etc, Complete As Per Standard Specification 29 Providing Laying The Flooring Withanti Skid Coloured Ceramic Tiles Of Sizes 305Mm X305mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:3 ( One Cement , Three Sand ) Over 20 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 30 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X200mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:2 ( One Cement , Two Sand ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 31 Supply And Fixing Of M.S Grills With Doors And Windows With One Coat Of Red Oxide With Primer Including All Costs Such As Welding, Grinding And Fabrication Charges, Cost And Conveyance Of All Materials To Site Etc, Complete As Per Standard Specification. 32 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 33 Supplying And Laying Rubberised Inter Locking Paver Block M40 Grade Providing And Laying Of 63Mm Thick High Strength Type Confirming Is 15658-2006 Of Rubberised Inter Locking Paver Block Insize Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Stone Dust Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Stone Dust Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 34 Providing And Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam ( Wmm ) Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage To Mixed Material By Tipper To Site Laying In Uniform Layers With Paver In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achive The Desired Density Complete As Per Clasue 406 Of Morth Specifications. 35 Supplying & Fixingdoor Shutters For Mediun Density Fiber Board Of Exterior Grade 35 Mm Thick, Single Leaf Conforming To Is:12406 / 1989 With 35X12 Mm T.W.Lipping On All Edges With Necessary Adhesives And Cp Screws Complying With Standard Specifications. The Rate Is Inclusive Ofthreee Coats Of Best Quality Varnish But Excluding Cost Of Furniture Fittings.Such As 300 Mm Tower Bolt 2Nos, 200Mm Towerbolt I No. 300Mm Aldrop 1 No. Alu Handle Ornamental Type 2 Nos, And 1 No. Door Stopper Etc Complete. 36 Upvc Ventilatorspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work Pwd Sor Pg. No. 71 Sl.No.261 37 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete 38 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers Etc., Complete.-10 Cum 39 Fabricating Supplying And Fixing Of Pre Painted Polycorbonate Sheets With The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 40 Supplying And Erecting In Position Of Following Liters Capacityindustrial Model Reverse Osmosis Water-Cum-Purifier To Deliver Potable Water With World Health Organisation ( Who ) Standards With Following Accessories. ( A ) Ms Skid - 1 No. ( B ) Media 11054 No. Vessel With 20 Nb Multiport Valve ( Withmedia Pubble And Fine Sand And Activated Carbon Filling ) Set ( C ) Feed Pump 0.50 Hp – 1 No. ( D ) Vertical Pump 2-9, 2.00 Hp / Single Phase – 1 No. ( E ) Membrane 40 X 40 Filmtech ( Or ) Equilaents / Osmonic ( Usa ) - 1 No. And Membrane Pressure Vessel 40 X 40 -1 No. & Pressure Gauge - 2 Nos. ( F ) Flow Meter - 1 No. 20” Filter With Housing - 1 No., Lowpressure Switch - 1 No., Levelswitch - 1 No. & Necessarycpvc Pipes And Fittings. The System Shall Be Provide With Two Panel Control Systemwith Necessary Stainless Valves And Fittings And Float Controletc. The Rate Should Be Inclusive Of All Civil Works, Wherevernecessary To Install The System In Position And Intact. ( 250 Litres ) Pwd Sor Pg No 72 ) 41 Supply Fixing And Errection Of Cctv Camara Including Cost And Conveyance Of All Materials To Site Etc Complete As Per Specification ( 5Units / Park ) ( Pwd Sor Page ( 153 To 157 ) 42 Cctv Camera ( Q ) 43 Network Video Recorder ( Pwd Sor Pg.No :165 ) 44 Hard Disc For Nvr 4Tb ( Pwd Sor Pg.No :166 ) 45 24 Port Patch Panel ( Pwd Sor Pg.No :166 ) 46 Rack With Accesssories -4U ( Pwd Sor Pg.No :166 ) 47 Armoured Lan & Cctv Cable ( Cat-6 ) ( Pwd Sor Pg.No 164 ) 48 29 Led Tv For Display ( Q ) 49 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 100A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1-1 / 2 Feet Of 12Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 100A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complet ( Sd 130 ) 50 3.5 Core 25 Sq.Mm. Pvc Armoured Ltug Cable ( Sd 204 ) 51 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories And With Tw Switch Box And 5A Ft Switch With Painting Of Suitable Colour For Open Pvc Light Point / Fan Point ( For Electronic Regulator ) ( 4 Points Per Coil ) ( Sd 17 ) 52 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Suitable Tw Box In Flush With Wall To House The Control Switch Regulator And Covered With 3Mm Thick Hylem Sheet With Painting Of Suitable Colour With Continuous Earth Connection Of 14 Swg Tc Wire For Open Pvc Fan Point ( For Rheostatic Type Fan Regulator ) Sd ( 34 ) 53 Supply And Fixing Of 6A 3 Pin Flush Type Wall Socket With 6A Flush Type Switch Concealed In Suitable Ms Box In Flush With Wall And Covered With 3 Mm Thick Hylem Sheet ( Sd 138 ) 54 Supply And Fixing Of 5A 3 Pin And 2 Pin Combined Flush Type Wall Socket With 5A Flush Type Switch Concealed Insuitable Ms Box In Flush With Wall And Concealed With 3Mm Thick Hylem Sheet Sd ( 135 ) 55 Supply And Run Of 2 Of No.8 Swg Gi Wire For Guarding With Cradle With No.8 Swg Gi Wire At The Equal Interval Of 1.5Metre Sd ( 75 ) 56 Supplying And Fixing Mcb Isolator 32A Tp With Earth Connection ( Legrand ( Mds / Hager ( L & T Make ) ( Pwd Sor P.No :143 ) 57 Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia Not Less Than 40Mm With Copper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funneling Arrangements With Necessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry ( Sd233 ) Body Earth 58 Supply And Fixing Of 18W 4 Feet Led Fitting With Led Light Fitting Complete With Tw Round Blocks On Ceiling With Pvc Unsheathed Copper Leads From Terminals To The Fitting ( Sor Page No.121 ) 59 Supply And Fixing Of 18W Led 3000K Square Type Resessed Fiiitng ( Philips / Havells ) Complete With T.W Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheather Copper Leads From Terminals To The Filling ( Pwd Sor P.No : 121 ) 60 Supply And Fixing Of 18W Led 3000K Roundtype Resessed Fiiitng ( Philips / Havells ) Complete With T.W Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheather Copper Leads From Terminals To The Filling ( Pwd Sor P.No : 121 ) 61 9 Metre Length Single Bracket Pole With Base Plate ( 300 X 300 X 6Mm ) 114.30Mm Od X 5.40Mm Thick X 5000Mm Length, 88.90Mm Od X 4.85Mm Thick X 2000Mm Length, 76.10Mm Od X 3.25Mm Thick X 2000Mm Length Pwd Sor P.No 160 62 Supply And Fixing Of 60W Led Street Light Fitting With Led ( Philips / Havells ) Complete Pwd Sor P.No 122 63 Supplying And Erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable For 12 Luminaries For Wind Speed Up To 180 Km / Hr. As Per Is -875 Parts -3 Material Cons.: Bsen 10025 # Mechanical Components Including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries And C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.Etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts And Bolts. # Cable With Termination & Distribution Box. # Foundation A0.45Essories. # Winch Assembly # Power Tool. Mast Bottom Dia:415 Mm. Top : 150 Mm, Thk: 4, 3, 3 Mm. Motor-1.Feeder Pillar Box Comprising 100 Ams Fuse Unit 24 Hours Timer 1-Nos And Contactor 1-Nos Outgoing Mcb Toggle Switch And Neutral Link With Internal Wiring Made Of Ms Sheet And Vermin Proof.Erection And Commissioning Of 20 Mtr High Mast On The Above Said Concrete Foundation Using Suitable Equipments.Fixing Of Flood Light Luminaries In The Lantern Carriage Including Internal Wiring & Using Flexible Copper Cable Complete. Halonix Led Flood Light 150W ( Cw ) 12 Nos ( Pwd Sor P.No : 161 ) 64 Providing Rain Water Harvesting Using 3 Nos.Of Rcc Well Rings Of 90Cm Inner Dia ( Clear ) With 5Cm Wall Thickness Made Out Of Cement Concrete 1:2:4 Using 20Mm Hard Broken Jelly To A Height Of 30Cm Each Supplying And Fabricating 16 Nos. Of 6Mm Dia Ms Rod Vertically And 3 Nos. Of 6Mm Dia Ms Rod Circumferentially Tied Together With 18 Guage Binding Wire For Well Rings Including Necessary Earth Work Excavation 1M Dia Toa Depth Of 1M, Supplying And Filling 40Mm Hbg Inside The Erected Well Ring To A Depth Of 90Cm, And Top Covered With Rcc Circular Perforated Cover Slab Of 1M Dia And 5Cm Thick Which Inclusive Of Cost And Fabrication Of 6Mm M.S Reinforcement At 15 Cm Spacings On Both Directions And One 6Mm M.S Rod Ties At The Edge Of The Slab Circumferentially Including Cost Of Moulding, Curing, Finishing And Well Placing In Position And Disposing Off Excavated Earth With All Initial Leads And Lifts In Places As Shown By The Departmneal Officers Etc., Complete In All Respects. 65 Supply And Delivery Of Electric Monoset Centrifugal Pump Conforming To Is 9079:2002 As Amended From Time To Time, With Ci Fg 200 Casing , Hydraulically And Dynamically Balanced Bronze Grade Ltb-2 Impeller, Impeller Ring And Casing Ring, Stainless Steel Shaft Capable Of Discharging Required Quantity Of Water Against A Total Head Noted Below Due To All Causes. Pump Shall Of Bee 3 Star Rated And Capable Of Discharging The Specified Quantity At The Head Noted At The Minimum Npsha At Site Conditions. The Shut Off Head Shall Be Atleast 25% Over And Above The Head At Duty Point. The Pump Shall Be Suitable For Operation In Ac Three Phase , 415 V+ / - 10% , 50 Hz + / - 5%. Squirrel Cage Induction Motor For Continuous Operation. The Speed Of The Pump And Motor Shall Be Not Less Than 2700 To 2900 Rpm Respectively. 500X20lpm ( Twad Sor P.No:95 ) 66 Providing & Fixing Pvc Rain Water Down Fall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] ( D ) 67 Supplying And Fixing Of 1000 Litters Capacity Pvc Tank Of Approved Quality Including Cost Of All Materials Like Tank Fittings, Lead .Lift, Errection Etc Complete. Pwd Sor Pgno:93 68 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. ( D ) 69 25Mm Gun Metal Valve 70 32Mm Gun Metal Valve 71 Suppling And Fixing In Position15mm.Diameter Brass / C.P Screw Down Tap / Pillar Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac, Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary ( D ) 72 Sd Tap 73 Pillar Tap 74 P.V.C. Pipes ( 10Kg / Sqcm ) Supplying Laying And Jointing P.V.C Pipes ( 10Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges. ( D ) 75 20Mm Dia Pipe 76 25Mm Dia Pipe 77 Supplying Pvc Specials ( With Working Pressure 10 Kg. / Sq.Cm. ) In Water Supply Arrangements ( Both In Internal And External Water Supply Arrangements Pwd Sor Pg.No:99 Si.No:367 78 Coupler 79 25Mm Dia 80 32Mm Dia 81 Elbow 82 25Mm Dia 83 32Mm Dia 84 Bend 85 25Mm Dia 86 32Mm Dia 87 Tee 88 25Mm Dia 89 32Mm Dia 90 End Cap 91 25Mm Dia 92 32Mm Dia 93 Reducer 94 25Mm Dia 95 32Mm Dia 96 Reducer Tee 97 25Mm Dia 98 32Mm Dia 99 Reducer Elbow 100 25Mm Dia 101 32Mm Dia 102 Jet Nipple 103 25Mm Dia 104 32Mm Dia 105 Supplying And Fixing In Position Pvc Specials Of The Following Dia And Types Of Approved Quality Confirming To Bis And Providing Leak Proof Joints Including Fixing To The Walls And Giving Connection To The Pvc Soil Stacks, Dismantling The Masonry Or Rcc Works And Re-Doing The Dismantled Portion To Original Condition Etc., Complete Complying With Standard Specifications. ( The Pvc Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . ( D ) 106 Pvc Elbow 107 110Mm Dia 108 Pvc Elbow With Door 109 110Mm Dia 110 Pvc Tee 111 110Mm Dia 112 Pvc Tee With Single Door 113 110Mm Dia 114 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( D ) 115 S / F In Position Of Indian Make White / Colour Glazed Earthen Ware Lipped Mouth Flat Back Urinal Of Best Approved Quality With G.I.Pipe Connection To Suitable Length, 32Mm Bell Mouthed P.V.C Connection , 15Mm Dia G.M.Wheel Valve, Fixing The Urinal To The Wall In Positionwith Necessary T.W.Plugs , Clamps, Screws, Shellac Etc., Including Dismantling Masonry If Necessary And Redoing The Same To Original Condition , Fixing The 15Mm Dia. G.I.Pipe Connection And Wheel Valve , Painting The Pipe With Two Coats Of Approved Paint Over One Coat Of Primer And Checked Without Any Leakage Complete, Complying With Standard Specifications. - White Colour 116 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Os S Trap With Double Flapped Rigit P.V.C. Seat Cover With C.P. Brass Hinges With 12.5 Litres Pvc Low Level Flushing Tank With All Internal Fittings Etc., Complete Complying With Standard Spoecifications, Labor Inclusive Of Fixing Lowlevel Flushing Tank. ( D ) 117 White Ewc 118 Supply And Fixing Of Pvc. Nahini / Floor Trap With Stainless Steel Gratings- 100 Mm X 75 Mm Including All Charges Etc, Complete As Per Standard Specification. ( D ) 119 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete ( Pwd Sor 2020-2021, P.No 62 )

Key Value

Document Fees
Refer document
EMD
INR 259000.0 /-
Tender Value
INR 2.59 Crore /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail