Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-12-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-12-2023 |
| Sl. No. | Item Description |
| 1 | Checking and attending to leakages in bib taps, mixer taps, stop cocks, angle valves, flushing cisterns, GI pipes, etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings including replacement of defective material /items and all connected plumbing worksetc complete all as spd & directed. |
| 2 | Checking and attending to welding work in repairs to steel windows, handles, door springs, iron frame of doors, rolling shutter garrages and other iron misc works, repair by welding (run or spot welding as per site requirement) including replacement of defective items/ materialalongwith & including welding machine, gloves, welding glass, welding rod, any other tools required, as per requirement complete all as specified and directed. |
| 3 | Checking and attending to carpenter work in repairs to joinery (wooden / steel / aluminium) incl iron/aluminium mongery, pelmet box, door springs, rolling shutters, etc requiring carpentry work and carrying out minor repairs such as tighting of screws/nails, wires of false ceiling, easening of joinery, door spring etc includingreplacement of glass panes,wirecloth to joinery or any defective items/materials complete all as specified and directed. |
| 4 | Checking and attending to cleaning and maintenance of sewage system including blockage/choke in WHB, bottle traps, kitchen sink / Nahani/floor traps, water closets, soil/waste pipe running on external walls of bldgs including junction holes of any description and sewage line of any sizes upto first manhole in running/flowing order without blockage of any description in any situation manually or mechanically as required includingall equipment viz, bamboo, tools, sewage pump, sewage machine etc including replacement of defective items / material complete all as specified & directed. |
| 5 | Note for Item No. 1 to 4 :-(i) Contractor or his authorised rep will report daily at 0900 hrs and onwards at complaint cell for collection of complaints from the concerned JE;s/MES repand distribute to all complaints/ detailing to tradesman, monitoring the work done and taking the complaint slip from trademans on every working day and re-submit the same after rectifying the complaint at complaint cell, failing which a recovery of Rs 1000/- per day shall be recovered from the contractor\"s due payments. |
| 6 | (i) Contractor or his supervisor/site Engineer will report daily at 0900 hrs at complaint cell for collection of complaints from the concerned JE in-charge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE than after toEngineer in charge by the contractor/ his rep immediately.If Engineer-in-charge is satisfied with contractor\"s view, no recovery will be made on this account.However complaints related to sewage line blockage /pipe replacement etc whatever is applicable shall be attended on same day whether it is \"Sunday\" or \"Gazetted Holidays\" and nothing extra shall be payable to contractor on this account |
| 7 | (ii)Contractor or his supervisor / site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaints register, issue of complaints slip to tradesmen and enter after completion in complaint register as instructed by JE,s. In case of absense of contractor rep for noting complaints, a penalty of Rs 1000.00 per day will be deducted from the contractor bill. |
| 8 | (iii)The complaint shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a Penalty @ Rs.500/- Per complaint per day (08 hrs) shall be levied upon / imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30 x complaints slip book as per proforma let wiht 400 leaf each booklet |
| 9 | (iv)Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as \" Supply Only\". |
| 10 | (v) The labour / tradesmen required for replacement of \"Supply onl\" items are included under this item.However labour charges for items where indicated \"M&L\" , \"S&F\" and \"in repairs\" shall be included in respective item. |
| 11 | (vi)The above all aspect shall be deemed to be included in the quoted rate of the respective item. |
| 12 | Taking up or down 15 mm bore dia steel tubing and connectionscomplete all as spd and directed. |
| 13 | All as per itemabove, but 20 mm bore dia. |
| 14 | All asper item above but 25 or 32mm bore dia |
| 15 | M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed. |
| 16 | All as per item above but 20 mm bore tubing. |
| 17 | All as per item above but 25 mm bore tubing. |
| 18 | All as per item above but 32 mm bore tubing. |
| 19 | M&L 16mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed. |
| 20 | M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed. |
| 21 | S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed. |
| 22 | S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle,complete all as specified and directed. |
| 23 | S&F in repair cast copper alloy, chromium plated Health faucet body with 1mtr ABS body pipe complete all as specified and directed. |
| 24 | S&F CP Grating doom 100mm dia of with of without waste hole complete all as specified and directed. |
| 25 | S&F CP Grating doom 125mm dia of with of without waste hole complete all as specified and directed. |
| 26 | S&F in repair PVC water storage tank lid with locking arrangement complete for tank capacity 500 to 1000ltrs complete all as specified and directed. |
| 27 | S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed. |
| 28 | S&F in repair brasschromium plated bottle trap 32 mm bore complete all as specified and directed. |
| 29 | S&F in repair PTMT float valve high pressure with polythene float and fly nut complete screwed for iron pipe of brass ferrule 20 mm bore dia, with requiered elbow ,nipple, socket of GI ,complete all as specified and directed. ( Note: Make Prayag /Shakti/ polytuff) |
| 30 | All as per itemabove but 25mm bore. |
| 31 | S&F in repair 32/40mm bore waste fittings brass chromium plated for sinks, basins etc complete all as specified and directed. |
| 32 | S&F in repair internal fitting set for low level cistern as per existing model complete all as specified and directed. |
| 33 | S&F in repair plastic equilibrium float valve for low level cistern as per existing model complete all as specified and directed. |
| 34 | S&F in repair flexible PVC waste pipe with couplercomplete 900mm length complete all as specified and directed. |
| 35 | S&F in repair Spindle (face part) for CP bib tap, stop cock, pillar cock,and concealed valve as per existing model complete all as specified and directed. |
| 36 | S&F in repair CPover head shower rose 125 mm dia with arm moving arrangement complete all as specified and directed. |
| 37 | S&F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed. |
| 38 | S&F in repair 10 ltrs capacityPVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore of pipecomplete all as specified and directed. |
| 40 | S&F in repairPVC (SWR) bends any radius110mm bore of pipe complete all as specified and directed. |
| 41 | S&F in repair poweder coated mild steel brackets for Wash Hand Basin with necessary nuts/bolts complete all as specified and directed. |
| 42 | S&F in repair type brass chromium soap dish,complete all as specified and directed. |
| 43 | S&F in repair in repairfanct type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 44 | S&F in repair fancy type brass chromium plated Tubular towel ring, 20mm dia, round type, 20cm diacomplete all as specified and directed. |
| 45 | S&F in repair fancy type brass chromium plated toilet paper holder complete all as specified and directed. |
| 46 | S/F in repair viterous china squatting pan \"ORISSA Pattern\" size 580x440mm white with integral foot rests incl P or S Trap) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface complete all as specified and directed. |
| 47 | S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in ends of brackets but including waste pipecomplete all as specified and directed..Make : Hindware / Cera / (1st quality). |
| 48 | S&F in repair Vitreous China wash basin, white, Oval shape, under countered size as per existing model 480X560X 150 mm including coupling, waste pipe fix in granite top complete all as specified and directed. |
| 49 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white and connection with cistern copmlete complete all as specified and directed. |
| 50 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 51 | Supply and fix in repair 1000 Litres multy layred rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top tripple layer) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 52 | Supply and fix in repair 500 Litres multy layred rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top tripple layer) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 53 | S&F in repairs stainless steelsink with draiage board made out of1 mm thick sheet 304 steel grade for kitchen with plug , washer and wates, including bedding in cement morter to dwarf wall or including fixcing cantilever brackets and connecting union to pipe overall size 915 x 460 mm of bowl size 410mm x330mm x203mm etc complete all as specified and directed. |
| 54 | S&F in repair Mild steel peg stays for steel windowetc as per sample complete all as specified and directed. |
| 55 | S&F in repair Mild steel handles for steel window etc as per sample.all as spd & directed. |
| 56 | S&F in repair door stopper of aluminium alloy body and tongue anodisedwith hard drawn steel spring complete all as specified and directed. |
| 57 | S&F in repair stainless steel butt hinge medium weight 100 mm size complete all as specified and directed. |
| 58 | S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets,stops, rollers etc. |
| 59 | S&F for drapery rod\"s side bulb stainless steel chromium plated suitable for 25mm bore curtain rod |
| 60 | S&F in repair coated MS drapery rod\"s brackets as required complete all as specified and directed. |
| 61 | Supply onlyMS300mm, ordinary rat tailrod pattern springs including roller and roller plate complete all as specified and directed. |
| 62 | Supply only 600mmx450mm looking mirror of 5mm thick selected quality bevelled edge glass, mounted on 6mm thick AC building board or commercial plywood, and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 63 | S&F in repairaluminium anodised barrel tower bolt 150 mm sizeof extruded section complete all as specified and directed. |
| 64 | S&F in repair aluminium handles cast type anodised 150 mm size complete all as specified and directed. |
| 65 | S&F in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.. |
| 66 | S&F 4mm thick sheet glass , ordinary quality and glazing with pins, steel beading with nut bolt etcin square n.exc 0.5 Sq m in each pane complete all as specified and directed. |
| 67 | S&F 4mm thick sheet glass , ordinary quality and glazing with pins, steel beading with nut bolt etcin square n.exc 0.5 Sq m in each pane including hacking out from metal frame including punching or drilling out old glazingcomplete all as specified and directed. |
| 68 | S&F 4mm thick figured glass ,pin head type and glazing with steel beading with nuts and bolt etcin square n.exc 0.5 Sq m in each pane including hacking out from metal frame including punching or drilling out old glazing complete all as specified and directed. |
| 69 | S&F in repairsstainless steel wire cloth 0.36 mm nominal dia or wire and an average width aparture 1.40 mm and fixed with tinned takcs or galvanised wire stapple, steel/wooden beadings etccomplete all as specified and directed. |
| 70 | Supply and fix in repair 5 mm thick looking mirrorsize exc 0.4 Sqm but n exc. 1.5 Sqmof a rounded edge of selected quality glass fix with CP brass screws complete all as specified and directed. |
| 71 | S&F Granite (of any type) 20mm thick machine cut, in slabs, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing cutting of holes for taps, WHB, gas pipe etc. complete |
| 72 | Taking down chowkhats or frames not exc 1.50 sqm each with shutter (without taking off shutters from the frame) and removing complete all as specified and directed. |
| 73 | Taking down chowkhats or frames exc 1.50 sqm but n exc 4 sqm each with shutter (without taking off shutters from the frame) and removingcomplete all as specified and directed. |
| 74 | Taking down shutter of any description not exc 2.00 sqm each and removing complete all as specified and directed. |
| 75 | S&F Rolled mild steel framedwork in doors frames or support of granite slab of angle or other section with rail, braces, holdfast, etc complete incl fixing of hinges and fixing in position includingold frame complete all as specified and directed.(Gde E-250) Quality \"A\" |
| 76 | S&F glazed and skeleton shutters, second class hard wood, open rebated and prepared to received glass, glaze etc devided into two square, edged of framing plain, chemferred or rounded fitted without and mitred heads for securing glass etc, size of member of shutter as specified inSSR Part Ithickness of shutter is 35 mm complete all as specified and directed. |
| 77 | S&F Rolled section as in main and cross beams, hips and jack rafters, purline where connected to common rafters and running rails and guids for sliding doors fixed with angle cleats or other plates, conforming to Fe 410W grade E-250 Quality \"A\" complete all as specified and directed. |
| 78 | S & F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified. |
| 79 | S&F FRP door frame 90x45mm size hollow frame made of 3mm thick FRP and infilled with second class hard wood timber blocks at required places/junction/hinges etc complete all as specified and directed. |
| 80 | S&F 30mm thick Glass Fibre Reinforced Plastic (FRP) pabel door shutter conforming to IS 14856-2000 of required colour and approved manufacturer. Rails and stiles hall be of fire retardant grade unsaturatedpoluester resin, moulded to 3mm thick FRP laminate for forming hollow rails and stiles with suitable second class hardwood timber blocks inside, at required places as shown on drg, for fixing of fittings.The panels of 5mm thick FRP shall be cast monolithically.Complete all as specified and directed. |
| 81 | S&F Factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 82 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 83 | S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and complete all as specified and directed. |
| 84 | All as per itemabove but without glazing bars. |
| 85 | M & L two coat synthetic enamel paint over a coat of pink primer for wooden Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new surfaces. complete all as specified and directed. |
| 86 | S &F Butt hinges,100mm long, medium weight, stainless stee steel, and fixedcomplete all as specified and directed. |
| 87 | S&F aluminium anodised barrel tower bolt 150 mm sizeof extruded section complete all as specified and directed. |
| 88 | S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed. |
| 89 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.. |
| 90 | M&L 18/19 mm thick Prelaminated particle board water proof board in (kitchen drawer and cup board) exterior grade, prelaminated one side with decorative choice lamination,& other side balancing white lamination, fixed with screws to timber frame work including dismantling boarding any type complete all as specified and directed. |
| 91 | Refixing the shutter after taking down in the same opening after repairing the shutters of any description n exc 1 sq. m eachcomplete all as specified and directed. |
| 92 | S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed. |
| 93 | S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of powder coted MS, bright finished for almirah and cup board complete all as specified & directed. |
| 94 | S&F joint free coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. in patch work repair, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 including dismantling of old tiles with backing complete all as specified and directed. |
| 95 | M&L for joint free non skid colour ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, in patch work repair, setjointed in neat cement slurry & pointed in coloured cement to matchand including 15 mm thick screed bed in CM (1:4)including dismantling old tiles with backing complete all as spd and directed. |
| 96 | M&L for Glazed ceramic coloured tiles in vertical surface,300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed. |
| 97 | M & L for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed. |
| 98 | M & L for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exc 0.36 sqm but n. exc 0.96 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed. |
| 99 | M & L for lightshed or printed matte Finish Heavy duty vitrified extrior/parking tiles 10-12mm (square/rectangular), area of each tile n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed. |
| 100 | M & L for brick work with sub class \" B\" brick straight or curved on plan exc. 6 mtrmean radius built in cement mortor1:4 including all arrangement including demolition brick work complete all as specified and directed. |
| 101 | M & L Rendering 12-15mm thick in ready mix on brick workor concrete surfaces to be finished even and fair (without using extra lime or cement)as in patch works or whole work including taking down cement plaster complete all as specified and directed. |
| 102 | M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement)as in patch works or whole work including taking down cement plaster complete all as specified and directed.. |
| 103 | M & L Rendering 12-15mm thick in ready mix on brick workor concrete surfaces to be finished even and fair (without using extra lime or cement)as complete all as specified and directed.. |
| 104 | M & L two coats of distempering walls with distemper oil emulsion, white or tinted over a coat of primerincluding preparation on new surface scomplete all as specified and directed. |
| 105 | M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying three coats of white lime wash,complete all as specified and directed. |
| 106 | M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified. |
| 107 | S&F false ceiling with powder coated GI gridof size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type. |
| 108 | Refixing/resecuring of false Ceiling board andsnap grid frame workincluding providing 4mm dia GI wire as in hanger complete all as specified and directed . |
| 109 | M & L for providing and fixing of 10 mm thick plaster of Paris ceiling with sunk or raised moulding as ordered (Gypsum anhydrous) to flat wooden surface or metal frame work and reinforced with GI wire mesh as approved pattern complete all as specified and directed. |
| 110 | S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheetinclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling existing wall penelling/boarding any type. |
| 111 | S&F 8-10mm thick printed synthetic hollow PVC panel for wall and ceiling any pattern colour inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawingover and including GI/Aluminium grid (confirm to sample) including all necessary arrangement for fixing of ceiling panels such as cleats/hangers/fasteners etc complete all as specified and directed. |
| 112 | S&F in repair aluminium body (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed. |
| 113 | Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including providing necessary groove for required size of panel, in patch work repair including taking down cement plaster/grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. includingproviding necessary scafolding for work upto 4 storey bldg. |
| 114 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. upto 500 liter complete all as specified and as directed. |
| 115 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. exc 500 liter up to 1000 liters as directed by Engineer in charge. |
| 116 | S&F in repair 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed |
| 117 | S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches |
| 118 | S&F in repair Brass CP Wall mixer non telephonic type for mixing hot & cold water for Shower screwed down for 15mm bore iron pipe or ferrul. |
| 119 | M&L for Marble work table rubbed and polished bothe face for urinal partition /wall lining(veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade. |
| 120 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed . |
| 121 | Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed/backing in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed. |
| 122 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strerngth of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed including dismantling of old AC sheet roof covering and removing rubbish beyond MOD land . |
| 123 | S&F Pre-painted galvalume aluminium zinc coated GI based plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof ridge covering, fixed with self tapping screws by providing proper notch/cut in the pattern of corrugated roof sheeting to cover up the gaps of corrugation complete all as specified and directed . |
| 124 | S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified. |
| 125 | S&F powder coated Anodised aluminium window and without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no. each shutter). hinges type B-21 100mm long (2 no. each shutter) suitable handle (1 no. each shutter) complete all as specifiedNote:-(Glass for doors and windows under this item shall be measured and paid seperately under respective item). |
| 126 | S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/ mincluding necessary joining cleats,glazing clips, ruber neoprene packing, aluminium handles 2 Nos 150mm long in each shutter, hinges 03 Nos 100mm long in each shutter, Tower bolt 02 Nos 150mm long in each shutter, anodised aluminum snap beading screws etc. complete all as specifiedNote:-(Glass for doors and windows under this item shall be measured and paid seperately under respective item). |
| 127 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as specified and directed. |
| 128 | Repairs to Aluminium Doorsincluding taking down the shutter n.exc 2.00 Sqm each for repairs including replacement of defective parts of frame/shutters i.e. cleats, angle, scruew, clips, gasket, rubber beadings, channels etc and refixing in the same opening complete all as specified and directed (Note : certain builders hardware such as door closer, floor spring, door stopper, tower boldt, sliding bolt and handle, mortice lock and glass if replaced will be paid seperately in respective items). |
| 129 | S&F 5mm thick forsted glass selected quality fixed in aluminium/wooden joinery complete all as specified & directed. |
| 130 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 131 | M&L for repair of steel window by welding any damage parts like, hinges, peg stay, handle and oiling to make easy to open and close including replacement of box type hinges 4 nos each window all as specified and directed. |
| 132 | M&L for flush pointing to bricks laid flat or brick tiles in pavings /roof in C:M 1:3 mixec with 5% crude oil by weight of cement including racking out of existing joints or brick tiles complete all as specified and directed |
| 133 | M&L 40mm thick brick tiles laid on 15mm thic cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed including dismantling old brick tiles. |
| 134 | M&L for 4mm thick ACP sheet (Aluminium composite panel sheet) fixed in aluminium partion/door/window work including necessary jointing cleats, rubber beading, clips, etc complete all as specified and directed. |
| 135 | M&L for preparation of old treated surfaces of wallsand applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey) |
| 136 | M&L for preparation of old treated surfaces of wallsand applying one coat of cement base paint using spray gun/roller brushes complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey) |
| 137 | M&L for complete removal of old treatment and preparation of old plastered surfaces of walls and applyingtwo coats of oil bound distemper over a coat of 1 mm thick wall care putty wherever required to bring uniform surafce complete all as specified. |
| 138 | M&L for one coats of synethetic enamel paint(ordinary tint) including preparation of old steel surfacesof any description,over 10cm in width or girth,not otherwise described. |
| 139 | Demolition of reinforced cement concrete in any description or ground floor and paving not exc 15cm thick complete all as specified and as directed. |
| 140 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 141 | M & L for use and waste of form work to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 142 | M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. |
| 143 | S&F 12mm thick toughened glass with or without itching in selected pattern in partition/door with all necessary fittings and fixture including stainless steel chromium plated corner angle, top/bottom beading, cleats etc complete all as specified. |
| 144 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 145 | Providing and fixing factory made uPVC white color Sliding window Two/three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass and SS wiremesh, aluminum track on bottom rail for two/three track sliding frame, wool pine for Sliding sash and interlock. including taking down existing window any typecomplete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass, wiremesh and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 146 | S&F in repair 75/100 mm size mortice lock of brass, vertical type, 4 levers, complete all as directed. |
| 147 | S&F 18mm (+-0.7mm) thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified companyone side prelam and other side plain for kitcher cabinate and capboard shutter and also manufacturer\"s test report and test certificate is mandatory with each and every supply of material including dismantling boarding any type complete all as specified and directed. |
| 148 | S&F 18mm (+-0.7mm) thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified companyboth side plain for Shelf/Partitions/Drawer and also manufacturer\"s test report and test certificate is mandatory with each and every supply of material including dismantling boarding any type complete all as specified and directed. |
| 149 | S&F 05mm thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified companyboth side plain PVC Sheet for back side (Wall side) and also manufacturer\"s test report and test certificate is mandatory with each and every supply of material including dismantling boarding any type complete all as specified and directed. |
| 150 | S&F Modular kitchen Basket (SS) 15 to to 24 inch length divided into various section to hold diffenent styles and lengths of cutlery sutable for corner/pull out and side/front drawer complete all as specifed and directed. |
| 151 | S&F 100mm Hasp and Staple, Safety type, with stainless steel hinges pin including bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 152 | S&F megnaticcatches, and brass body and striking plate including letting in and fixed in repair complete all as specified and directed. |
| 153 | Supply & Fixed stainless steel telescopic Drawer channel of 18-20 Inches grade, polishesd, fixed with screws to timber drawer complete all as specified and directed. |
| 154 | S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 155 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board complete all as specified and directed. |
| 156 | S&F 100mm size Stainless steel handle complete all as specifed and as directed. |
| 157 | S&F in repair 100mm dia CI bends or diminishing pieces fixed to wall/floor complete all as specified and directed. |
| 158 | S&F in repair100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall in repair complete all as specified and directed. |
| 159 | S&F 100mm bore CI vent cowl complete all as specified and directed |
| 160 | S&F 100mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 161 | M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zincrich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exc 40mm thick (average thickness) with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 4 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 4 storey bldgs/in floor roofs complete all as specified and directed. |
| 162 | M&L for 18-20mm thick diamond cut calibrated, diamond cut pre-polishedkota stone slab flooringarea of each stone slab exceeding 0.30sqm and not exceeding 1.50sqm each (as approved by GE) in floor, steps laid over and including cement screed base 15mm thick screed bedding layer in CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding & bull nosing on the edges and polishing includingapplying cement slury @ 3kg per sqm and including M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed. |
| 163 | S&F selected quality double layered window roller blinds, light filtering windows treatment with mesh and opaque fiberic, 30cm wide approved coloured with constant force spring loaded mechanism with cover including installation brackets and mounting hardware complete all as specfied and directed. |
| 164 | M&L fo providing PCC louvers and jallies, 35mm thick type B0-1:2:4 (Using 12.5mm grade agg) (measured solid) including all moulding frame pillar set in CM 1:4 including taking down and removing from MOD land of old jallis complete all as specified and as directed. |
| 165 | M&L for repair of sensor slinding door belt/sensor/mortar including all fitting and service/visit charge complete all as specified and directed. |
| 166 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/airpressure and removal of debrish beyond MOD land complete all as specified and directed |
| 167 | M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed |
| 168 | M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work all as specified and directed. |
| 169 | M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed. |
| 170 | M&L for water proofing treatment to roof surface with APPwater proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish& reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat ofbitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 100mm at sides & 100mm at ends & sealing as per manufacturer\"s instructions including two coat(i.e 0.2 ltr/Sqm) of aluminium paint entaire treated surface.Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer. |
| 171 | S&F for 4mm GI Wire sutable for holding of net masquto incluing fixing to wall with anchore bolt and MS plate upto 4 story of building complete all as specified and as directed. |
| 172 | S&F MS plates, anchore bolt, angle cleats or other plates, conforming to Fe 290 grade E-165 complete all as specified and directed. |
| 173 | S & F of 2 mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugation side lap fixed with coach screws and washers including dismentling old fiber sheet complete all as specified and directed. |
| 174 | Supply and fixing in repairs viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, \"P\" or \"S\" trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements complete all as specified and as directed. |
| 175 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 176 | Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning , replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain/laths with required welding/ grinding/resecuring/punching and making good any damage to the existing shutters of any size |
| 177 | Taking downrolling shutter gear operated type with lever gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain lathswith required welding /grinding/resecuring/punchingand making good any damage to the existing shutters of any size complete all as specified and directed. |
| 178 | Taking down existing unserviceable rolling shutter complete of any size and any type andremoving from site |
| 179 | S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erect with gear operated type with bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed. |
| 180 | S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erection in position as indication complete push or pull type. |
| 181 | S & F in repairs suitable size steel ball bearing for smooth functioning of old rolling shutter. |
| 182 | S & F in repairs steel spring of suitable sizeforold rolling shutter and including smooth functioning andremoval of old steel spring from site all as directed. |
| 183 | S & F in repairs in rolling shutters top coverfabricated to required shape and size made out of 1.00 mm (20 gauge) thick M S sheet including necessary fixtures and fastening with one shop coat of redoxide primer complete all as directed. |
| 184 | S & F in repairs Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories all as specified and directed. |
| 185 | Deduct Credit: for demolished/dismantled material of (-)Rs 165460.00 (Minus) as listed in Schedule \"A\" Part II (Credit Schedule)Note: Tenderer\"s shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
